Date   

Re: Rig Control

James Artz
 

Hi Scott,
I got the software to control my rig, I played with the baud rate settings.
My question is this...will the frequency, power settings, band, etc now register when I log a QSO? If so, is there a video showing the proper setup? I am only using the Field Day software right now.
I want this info to export into my other logging software. If it doesn’t capture this info, the only use I see for rig control is to easily change a frequency. Are there any other features I am missing for rug control?
Thanks for your help!

On Wed, Jun 24, 2020 at 11:09 AM Scott Davis via groups.io <SNKDavis=aol.com@groups.io> wrote:
Hi Jim,

Thanks for your e-mail.  I'm sorry that you've run into trouble.  I'm not familiar with Macs or the software you mentioned, but if it has control of the com port, my software won't be able to access it.  More details on that are here:



I hope that this helps!

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: James Artz <jimdartz@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Wed, Jun 24, 2020 10:58 am
Subject: [N3FJPSoftwareUsers] Rig Control

I am trying to set up my KX3 for rig control, and it keeps saying Com4 is not available. I have set up MacLoggerDx on the mac side of my bootcamp, and it uses serial port.
What do I need to do to set up on the windows side of my bootcamp running Window 7 in this software?
Thank-you!
Jim
AC9QN


Re: Possible feature addition to AC Log Web Upload

Scott Davis
 

Thanks for sending along your thoughts and suggestions Matt!

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Matt Patterson <W5llmatt@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Thu, Jun 25, 2020 12:58 am
Subject: [N3FJPSoftwareUsers] Possible feature addition to AC Log Web Upload

Hi Scott,

I realize this probably wouldn't be on the high priority list but I utilize AC Log's web Upload feature to update my website with my online log.  I was wondering if you could change it to where either the comments field or one of the other fields could be added and displayed after the State column on the web page?  I would just like to be able to add a few notes about each contact and have those appear on the website along with the contact info.  You probably wouldn't want to want to add the comments field to the website as that is where the address info gets put in AC Log  so that's why I mentioned using the other field instead.

73 Matt
W5LL


Re: Possible Changes to Next Version of AClog

Scott Davis
 

Thanks for sending along your thoughts and suggestions Phil!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: philp51 <philp51@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Wed, Jun 24, 2020 10:41 pm
Subject: [N3FJPSoftwareUsers] Possible Changes to Next Version of AClog

Hi Scott, would it be possible to add the option of only hearing spots for New countries instead of Unconfirmed. Also could foreign characters like umlauts,tildes etc. be recognized when logging from QRZ database. Tnx..Phil


Possible feature addition to AC Log Web Upload

Matt Patterson
 

Hi Scott,

I realize this probably wouldn't be on the high priority list but I utilize AC Log's web Upload feature to update my website with my online log.  I was wondering if you could change it to where either the comments field or one of the other fields could be added and displayed after the State column on the web page?  I would just like to be able to add a few notes about each contact and have those appear on the website along with the contact info.  You probably wouldn't want to want to add the comments field to the website as that is where the address info gets put in AC Log  so that's why I mentioned using the other field instead.

73 Matt
W5LL


Re: Trying to set up FT-991 for rig control

nb7o
 

Norm,

 

Check our email.  I just sent you a message.

 

Seven three de Kevin/NB7O


Possible Changes to Next Version of AClog

philp51
 

Hi Scott, would it be possible to add the option of only hearing spots for New countries instead of Unconfirmed. Also could foreign characters like umlauts,tildes etc. be recognized when logging from QRZ database. Tnx..Phil


Re: Grid for a contact in LOTW

vhfer2001 <n7au@...>
 

That was my thought also Scott. And it is listed there in TQSL.
OK I'LL get off here and check with the LOTW desk.

Thanks Scott and everyone else.
Bob
N7AU
--
Sent from my Android phone with mail.com Mail. Please excuse my brevity.

On 6/24/20, 5:19 PM "Scott Davis via groups.io" <SNKDavis@...> wrote:
Hi Bob,

Thanks for your e-mail.  Your grid is specified in TQSL, not AC Log.

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: vhfer2001 <n7au@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Wed, Jun 24, 2020 7:59 pm
Subject: Re: [N3FJPSoftwareUsers] Grid for a contact in LOTW

I think so. What could I be uploading differant? Up loading new contacts. If I change something in the contact than something won't be right unless it is just a name but that doesn't show up either. How do I add the grid to make it shoe up?
--
Sent from my Android phone with mail.com Mail. Please excuse my brevity.
On 6/24/20, 4:38 PM "Larry Banks via groups.io" <larryb.w1dyj@...> wrote:
Hi Bob,

Are you selecting the correct LOCATION in the N3FJP LoTW upload screen?

73 -- Larry -- W1DYJ


-----Original Message-----
From: vhfer2001
Sent: Wednesday, June 24, 2020 19:29
To: N3FJPSoftwareusers@groups.io
Subject: [N3FJPSoftwareUsers] Grid for a contact in LOTW

Been through all the FRQ in N3FJP but unless I missed it don't find
anything.

Can anyone send me to the right place to have my grid show up in LOTW? My
long and lat are listed in N3FJP. My grid is listed under station
Properties in TQSL (Yes it is updated to the new one) but when I do an up
load to LOTW my grid does not show up under the contact I made with the
other station The contact is confirmed but doesn't show my grid sq. Theirs
is there but not mine.

Thank You
Bob
N7AU


--
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus








Re: Grid for a contact in LOTW

Scott Davis
 

Hi Bob,

Thanks for your e-mail.  Your grid is specified in TQSL, not AC Log.

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: vhfer2001 <n7au@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Wed, Jun 24, 2020 7:59 pm
Subject: Re: [N3FJPSoftwareUsers] Grid for a contact in LOTW

I think so. What could I be uploading differant? Up loading new contacts. If I change something in the contact than something won't be right unless it is just a name but that doesn't show up either. How do I add the grid to make it shoe up?
--
Sent from my Android phone with mail.com Mail. Please excuse my brevity.
On 6/24/20, 4:38 PM "Larry Banks via groups.io" <larryb.w1dyj@...> wrote:
Hi Bob,

Are you selecting the correct LOCATION in the N3FJP LoTW upload screen?

73 -- Larry -- W1DYJ


-----Original Message-----
From: vhfer2001
Sent: Wednesday, June 24, 2020 19:29
To: N3FJPSoftwareusers@groups.io
Subject: [N3FJPSoftwareUsers] Grid for a contact in LOTW

Been through all the FRQ in N3FJP but unless I missed it don't find
anything.

Can anyone send me to the right place to have my grid show up in LOTW? My
long and lat are listed in N3FJP. My grid is listed under station
Properties in TQSL (Yes it is updated to the new one) but when I do an up
load to LOTW my grid does not show up under the contact I made with the
other station The contact is confirmed but doesn't show my grid sq. Theirs
is there but not mine.

Thank You
Bob
N7AU


--
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus








Grid sq.

vhfer2001 <n7au@...>
 

I guess what I am asking how do I get ac log to up load the grid with others like time and date.

Bob
N7AU
--
Sent from my Android phone with mail.com Mail. Please excuse my brevity.


Re: Grid for a contact in LOTW

vhfer2001 <n7au@...>
 

I think so. What could I be uploading differant? Up loading new contacts. If I change something in the contact than something won't be right unless it is just a name but that doesn't show up either. How do I add the grid to make it shoe up?
--
Sent from my Android phone with mail.com Mail. Please excuse my brevity.

On 6/24/20, 4:38 PM "Larry Banks via groups.io" <larryb.w1dyj@...> wrote:
Hi Bob,

Are you selecting the correct LOCATION in the N3FJP LoTW upload screen?

73 -- Larry -- W1DYJ


-----Original Message-----
From: vhfer2001
Sent: Wednesday, June 24, 2020 19:29
To: N3FJPSoftwareusers@groups.io
Subject: [N3FJPSoftwareUsers] Grid for a contact in LOTW

Been through all the FRQ in N3FJP but unless I missed it don't find
anything.

Can anyone send me to the right place to have my grid show up in LOTW? My
long and lat are listed in N3FJP. My grid is listed under station
Properties in TQSL (Yes it is updated to the new one) but when I do an up
load to LOTW my grid does not show up under the contact I made with the
other station The contact is confirmed but doesn't show my grid sq. Theirs
is there but not mine.

Thank You
Bob
N7AU


--
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus








Re: Grid for a contact in LOTW

Larry Banks
 

Hi Bob,

Are you selecting the correct LOCATION in the N3FJP LoTW upload screen?

73 -- Larry -- W1DYJ

-----Original Message-----
From: vhfer2001
Sent: Wednesday, June 24, 2020 19:29
To: N3FJPSoftwareusers@groups.io
Subject: [N3FJPSoftwareUsers] Grid for a contact in LOTW

Been through all the FRQ in N3FJP but unless I missed it don't find
anything.

Can anyone send me to the right place to have my grid show up in LOTW? My
long and lat are listed in N3FJP. My grid is listed under station
Properties in TQSL (Yes it is updated to the new one) but when I do an up
load to LOTW my grid does not show up under the contact I made with the
other station The contact is confirmed but doesn't show my grid sq. Theirs
is there but not mine.

Thank You
Bob
N7AU


--
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus


Grid for a contact in LOTW

vhfer2001 <n7au@...>
 

Been through all the FRQ in N3FJP but unless I missed it don't find
anything.

Can anyone send me to the right place to have my grid show up in LOTW? My
long and lat are listed in N3FJP. My grid is listed under station
Properties in TQSL (Yes it is updated to the new one) but when I do an up
load to LOTW my grid does not show up under the contact I made with the
other station The contact is confirmed but doesn't show my grid sq. Theirs
is there but not mine.

Thank You
Bob
N7AU


--
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus


Re: Trying to set up FT-991 for rig control

Norm Fasoletos <norm.k7nwf@...>
 

Not making much progress on this end, I will have to reread the material, so far no luck getting N3FJP to work with logging, JT Alert works just fine. I guess JT Alert is my logging program for Field Day 🗳😞


On Jun 24, 2020, at 3:40 PM, Tom Job <ve3ii@...> wrote:



It’s all there, Norm.  Laurie is using the RTTY program but they are the same settings.  Laurie even red-boxed the settings J

 

73….Tom

 

From: N3FJPSoftwareUsers@groups.io [mailto:N3FJPSoftwareUsers@groups.io] On Behalf Of Norm Fasoletos
Sent: June 24, 2020 18:00
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] Trying to set up FT-991 for rig control

 

 

 

On Wed, Jun 24, 2020 at 2:54 PM Tom Job <ve3ii@...> wrote:

There is also a complete how-to in the JTAlert help file…with pictures and step-by-step.  Very easy!!  It covers JTAlert, WSJT-X and Scott’s software and how to link them altogether.

 

73…Tom VE3II

 

Thanks Tom, I am working on that right now, hit a stumbling block however in JT Alert after Enable AC Logging.  Have Local PC Checked, however no TCP port is shown ,  no log file either .Maybe more info on JT Alert Help File ?

 

73. Norm - K7NWF 

 

From: N3FJPSoftwareUsers@groups.io [mailto:N3FJPSoftwareUsers@groups.io] On Behalf Of Norm Fasoletos
Sent: June 24, 2020 17:20
To:
N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] Trying to set up FT-991 for rig control

 

Thanks Scott, I will check it out and see if it helps...

 

73

 

Norm - K7NWF

 

 

On Wed, Jun 24, 2020 at 2:12 PM Scott Davis via groups.io <SNKDavis=aol.com@groups.io> wrote:

Hi Norm,

 

Thanks for your follow up.  If you configure my Field Day software with your digital programs as detailed in the following link, as you log the QSO in the digital software, it will be immediately logged in my software.  So, you will not need to transfer via ADIF, you will have immediate dupe checking, etc.

 

 

Enjoy Field Day!

73, Scott

N3FJP

 

Serving the Amateur Radio community with contesting and general logging software since 1997.

 

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...

 

-----Original Message-----
From: Norm Fasoletos <
norm.k7nwf@...>
To:
N3FJPSoftwareUsers@groups.io
Sent: Wed, Jun 24, 2020 5:06 pm
Subject: Re: [N3FJPSoftwareUsers] Trying to set up FT-991 for rig control

Hi Scott, so explain to me in simple terms what this software is going to do for me as compared to JT Alert which i use now. Looks like my contacts will not be auto logged using your software, I would have to manually enter the contacts. I plan on using FT8 for field day, so JT alert logs automatically and creates an ADI file.

 

What advantage do I gain from using your software unless doing SSB Phone?

 

Thanks,

 

Norm

 

On Wed, Jun 24, 2020 at 1:56 PM Scott Davis via groups.io <SNKDavis=aol.com@groups.io> wrote:

Hi Norm,

 

Thanks for your follow up.  If you are using the connected program to perform rig interface, from the N3FJP program menu options click Settings > Rig Interface and select None from the rig list.

 

If you are using rig interface from my software, to only have N3FJP Software respond to mode updates sent from the connected program, click Settings > Rig Interface. Under the Mode By options, select Don't Use. Also, check the check box that says "Don't send mode change with frequency".

 

Enjoy!

 

73, Scott

N3FJP

 

Serving the Amateur Radio community with contesting and general logging software since 1997.

 

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...

 

-----Original Message-----
From: Norm Fasoletos <
norm.k7nwf@...>
To:
N3FJPSoftwareUsers@groups.io
Sent: Wed, Jun 24, 2020 4:36 pm
Subject: Re: [N3FJPSoftwareUsers] Trying to set up FT-991 for rig control

Scott, tried some of the setting for Yaesu listed, got it to talk to the 991, however,now when i go back to WSJTX I have lost the com port i am using for the new software. I then unplug the usb cable from the computer, plug in back in, WSJTX is now working again, no problem. Now the new software says access denied to the port (same one that i set up originally) which is the same as the WSJTX. 

 

My next question, i am a little bit confused on how this software will work for me using WSJTX, along with JT Alert that does my logging and also having to manually log my contacts on n3JFP too. Am I missing something here?

 

73

 

Norm - K7NWF

 

 

On Wed, Jun 24, 2020 at 11:32 AM Scott Davis via groups.io <SNKDavis=aol.com@groups.io> wrote:

Hi Norm,

 

Thanks for your e-mail.  I don't have any Yaesu equipment here myself, but you will find the successful settings other 991 users have sent along here:

 

 

Enjoy!

73, Scott

N3FJP

 

Serving the Amateur Radio community with contesting and general logging software since 1997.

 

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...

 

-----Original Message-----
From: Norm Fasoletos <
norm.k7nwf@...>
To:
N3FJPSoftwareUsers@groups.io
Sent: Wed, Jun 24, 2020 2:15 pm
Subject: [N3FJPSoftwareUsers] Trying to set up FT-991 for rig control

Can't seem to get the FT-991 to talk to the N3FJP Field day software. This is my first set--up using this software so a little new at this. I have no problem running WSJTx with rig control, but no luck with the new software. Any help is appreciated.

73

Norm - K7NWF

 


This email has been checked for viruses by Avast antivirus software.
www.avast.com




Re: Trying to set up FT-991 for rig control

Tom Job
 

It’s all there, Norm.  Laurie is using the RTTY program but they are the same settings.  Laurie even red-boxed the settings J

 

73….Tom

 

From: N3FJPSoftwareUsers@groups.io [mailto:N3FJPSoftwareUsers@groups.io] On Behalf Of Norm Fasoletos
Sent: June 24, 2020 18:00
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] Trying to set up FT-991 for rig control

 

 

 

On Wed, Jun 24, 2020 at 2:54 PM Tom Job <ve3ii@...> wrote:

There is also a complete how-to in the JTAlert help file…with pictures and step-by-step.  Very easy!!  It covers JTAlert, WSJT-X and Scott’s software and how to link them altogether.

 

73…Tom VE3II

 

Thanks Tom, I am working on that right now, hit a stumbling block however in JT Alert after Enable AC Logging.  Have Local PC Checked, however no TCP port is shown ,  no log file either .Maybe more info on JT Alert Help File ?

 

73. Norm - K7NWF 

 

From: N3FJPSoftwareUsers@groups.io [mailto:N3FJPSoftwareUsers@groups.io] On Behalf Of Norm Fasoletos
Sent: June 24, 2020 17:20
To:
N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] Trying to set up FT-991 for rig control

 

Thanks Scott, I will check it out and see if it helps...

 

73

 

Norm - K7NWF

 

 

On Wed, Jun 24, 2020 at 2:12 PM Scott Davis via groups.io <SNKDavis=aol.com@groups.io> wrote:

Hi Norm,

 

Thanks for your follow up.  If you configure my Field Day software with your digital programs as detailed in the following link, as you log the QSO in the digital software, it will be immediately logged in my software.  So, you will not need to transfer via ADIF, you will have immediate dupe checking, etc.

 

 

Enjoy Field Day!

73, Scott

N3FJP

 

Serving the Amateur Radio community with contesting and general logging software since 1997.

 

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...

 

-----Original Message-----
From: Norm Fasoletos <
norm.k7nwf@...>
To:
N3FJPSoftwareUsers@groups.io
Sent: Wed, Jun 24, 2020 5:06 pm
Subject: Re: [N3FJPSoftwareUsers] Trying to set up FT-991 for rig control

Hi Scott, so explain to me in simple terms what this software is going to do for me as compared to JT Alert which i use now. Looks like my contacts will not be auto logged using your software, I would have to manually enter the contacts. I plan on using FT8 for field day, so JT alert logs automatically and creates an ADI file.

 

What advantage do I gain from using your software unless doing SSB Phone?

 

Thanks,

 

Norm

 

On Wed, Jun 24, 2020 at 1:56 PM Scott Davis via groups.io <SNKDavis=aol.com@groups.io> wrote:

Hi Norm,

 

Thanks for your follow up.  If you are using the connected program to perform rig interface, from the N3FJP program menu options click Settings > Rig Interface and select None from the rig list.

 

If you are using rig interface from my software, to only have N3FJP Software respond to mode updates sent from the connected program, click Settings > Rig Interface. Under the Mode By options, select Don't Use. Also, check the check box that says "Don't send mode change with frequency".

 

Enjoy!

 

73, Scott

N3FJP

 

Serving the Amateur Radio community with contesting and general logging software since 1997.

 

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...

 

-----Original Message-----
From: Norm Fasoletos <
norm.k7nwf@...>
To:
N3FJPSoftwareUsers@groups.io
Sent: Wed, Jun 24, 2020 4:36 pm
Subject: Re: [N3FJPSoftwareUsers] Trying to set up FT-991 for rig control

Scott, tried some of the setting for Yaesu listed, got it to talk to the 991, however,now when i go back to WSJTX I have lost the com port i am using for the new software. I then unplug the usb cable from the computer, plug in back in, WSJTX is now working again, no problem. Now the new software says access denied to the port (same one that i set up originally) which is the same as the WSJTX. 

 

My next question, i am a little bit confused on how this software will work for me using WSJTX, along with JT Alert that does my logging and also having to manually log my contacts on n3JFP too. Am I missing something here?

 

73

 

Norm - K7NWF

 

 

On Wed, Jun 24, 2020 at 11:32 AM Scott Davis via groups.io <SNKDavis=aol.com@groups.io> wrote:

Hi Norm,

 

Thanks for your e-mail.  I don't have any Yaesu equipment here myself, but you will find the successful settings other 991 users have sent along here:

 

 

Enjoy!

73, Scott

N3FJP

 

Serving the Amateur Radio community with contesting and general logging software since 1997.

 

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...

 

-----Original Message-----
From: Norm Fasoletos <
norm.k7nwf@...>
To:
N3FJPSoftwareUsers@groups.io
Sent: Wed, Jun 24, 2020 2:15 pm
Subject: [N3FJPSoftwareUsers] Trying to set up FT-991 for rig control

Can't seem to get the FT-991 to talk to the N3FJP Field day software. This is my first set--up using this software so a little new at this. I have no problem running WSJTx with rig control, but no luck with the new software. Any help is appreciated.

73

Norm - K7NWF

 


This email has been checked for viruses by Avast antivirus software.
www.avast.com




Re: Trying to set up FT-991 for rig control

Norm Fasoletos <norm.k7nwf@...>
 



On Wed, Jun 24, 2020 at 2:54 PM Tom Job <ve3ii@...> wrote:

There is also a complete how-to in the JTAlert help file…with pictures and step-by-step.  Very easy!!  It covers JTAlert, WSJT-X and Scott’s software and how to link them altogether.

 

73…Tom VE3II

 

Thanks Tom, I am working on that right now, hit a stumbling block however in JT Alert after Enable AC Logging.  Have Local PC Checked, however no TCP port is shown ,  no log file either .Maybe more info on JT Alert Help File ?


73. Norm - K7NWF 

From: N3FJPSoftwareUsers@groups.io [mailto:N3FJPSoftwareUsers@groups.io] On Behalf Of Norm Fasoletos
Sent: June 24, 2020 17:20
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] Trying to set up FT-991 for rig control

 

Thanks Scott, I will check it out and see if it helps...

 

73

 

Norm - K7NWF

 

 

On Wed, Jun 24, 2020 at 2:12 PM Scott Davis via groups.io <SNKDavis=aol.com@groups.io> wrote:

Hi Norm,

 

Thanks for your follow up.  If you configure my Field Day software with your digital programs as detailed in the following link, as you log the QSO in the digital software, it will be immediately logged in my software.  So, you will not need to transfer via ADIF, you will have immediate dupe checking, etc.

 

 

Enjoy Field Day!

73, Scott

N3FJP

 

Serving the Amateur Radio community with contesting and general logging software since 1997.

 

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...

 

-----Original Message-----
From: Norm Fasoletos <
norm.k7nwf@...>
To:
N3FJPSoftwareUsers@groups.io
Sent: Wed, Jun 24, 2020 5:06 pm
Subject: Re: [N3FJPSoftwareUsers] Trying to set up FT-991 for rig control

Hi Scott, so explain to me in simple terms what this software is going to do for me as compared to JT Alert which i use now. Looks like my contacts will not be auto logged using your software, I would have to manually enter the contacts. I plan on using FT8 for field day, so JT alert logs automatically and creates an ADI file.

 

What advantage do I gain from using your software unless doing SSB Phone?

 

Thanks,

 

Norm

 

On Wed, Jun 24, 2020 at 1:56 PM Scott Davis via groups.io <SNKDavis=aol.com@groups.io> wrote:

Hi Norm,

 

Thanks for your follow up.  If you are using the connected program to perform rig interface, from the N3FJP program menu options click Settings > Rig Interface and select None from the rig list.

 

If you are using rig interface from my software, to only have N3FJP Software respond to mode updates sent from the connected program, click Settings > Rig Interface. Under the Mode By options, select Don't Use. Also, check the check box that says "Don't send mode change with frequency".

 

Enjoy!

 

73, Scott

N3FJP

 

Serving the Amateur Radio community with contesting and general logging software since 1997.

 

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...

 

-----Original Message-----
From: Norm Fasoletos <
norm.k7nwf@...>
To:
N3FJPSoftwareUsers@groups.io
Sent: Wed, Jun 24, 2020 4:36 pm
Subject: Re: [N3FJPSoftwareUsers] Trying to set up FT-991 for rig control

Scott, tried some of the setting for Yaesu listed, got it to talk to the 991, however,now when i go back to WSJTX I have lost the com port i am using for the new software. I then unplug the usb cable from the computer, plug in back in, WSJTX is now working again, no problem. Now the new software says access denied to the port (same one that i set up originally) which is the same as the WSJTX. 

 

My next question, i am a little bit confused on how this software will work for me using WSJTX, along with JT Alert that does my logging and also having to manually log my contacts on n3JFP too. Am I missing something here?

 

73

 

Norm - K7NWF

 

 

On Wed, Jun 24, 2020 at 11:32 AM Scott Davis via groups.io <SNKDavis=aol.com@groups.io> wrote:

Hi Norm,

 

Thanks for your e-mail.  I don't have any Yaesu equipment here myself, but you will find the successful settings other 991 users have sent along here:

 

 

Enjoy!

73, Scott

N3FJP

 

Serving the Amateur Radio community with contesting and general logging software since 1997.

 

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...

 

-----Original Message-----
From: Norm Fasoletos <
norm.k7nwf@...>
To:
N3FJPSoftwareUsers@groups.io
Sent: Wed, Jun 24, 2020 2:15 pm
Subject: [N3FJPSoftwareUsers] Trying to set up FT-991 for rig control

Can't seem to get the FT-991 to talk to the N3FJP Field day software. This is my first set--up using this software so a little new at this. I have no problem running WSJTx with rig control, but no luck with the new software. Any help is appreciated.

73

Norm - K7NWF




Avast logo

This email has been checked for viruses by Avast antivirus software.
www.avast.com



Re: Trying to set up FT-991 for rig control

Tom Job
 

There is also a complete how-to in the JTAlert help file…with pictures and step-by-step.  Very easy!!  It covers JTAlert, WSJT-X and Scott’s software and how to link them altogether.

 

73…Tom VE3II

 

 

From: N3FJPSoftwareUsers@groups.io [mailto:N3FJPSoftwareUsers@groups.io] On Behalf Of Norm Fasoletos
Sent: June 24, 2020 17:20
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] Trying to set up FT-991 for rig control

 

Thanks Scott, I will check it out and see if it helps...

 

73

 

Norm - K7NWF

 

 

On Wed, Jun 24, 2020 at 2:12 PM Scott Davis via groups.io <SNKDavis=aol.com@groups.io> wrote:

Hi Norm,

 

Thanks for your follow up.  If you configure my Field Day software with your digital programs as detailed in the following link, as you log the QSO in the digital software, it will be immediately logged in my software.  So, you will not need to transfer via ADIF, you will have immediate dupe checking, etc.

 

 

Enjoy Field Day!

73, Scott

N3FJP

 

Serving the Amateur Radio community with contesting and general logging software since 1997.

 

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...

 

-----Original Message-----
From: Norm Fasoletos <
norm.k7nwf@...>
To:
N3FJPSoftwareUsers@groups.io
Sent: Wed, Jun 24, 2020 5:06 pm
Subject: Re: [N3FJPSoftwareUsers] Trying to set up FT-991 for rig control

Hi Scott, so explain to me in simple terms what this software is going to do for me as compared to JT Alert which i use now. Looks like my contacts will not be auto logged using your software, I would have to manually enter the contacts. I plan on using FT8 for field day, so JT alert logs automatically and creates an ADI file.

 

What advantage do I gain from using your software unless doing SSB Phone?

 

Thanks,

 

Norm

 

On Wed, Jun 24, 2020 at 1:56 PM Scott Davis via groups.io <SNKDavis=aol.com@groups.io> wrote:

Hi Norm,

 

Thanks for your follow up.  If you are using the connected program to perform rig interface, from the N3FJP program menu options click Settings > Rig Interface and select None from the rig list.

 

If you are using rig interface from my software, to only have N3FJP Software respond to mode updates sent from the connected program, click Settings > Rig Interface. Under the Mode By options, select Don't Use. Also, check the check box that says "Don't send mode change with frequency".

 

Enjoy!

 

73, Scott

N3FJP

 

Serving the Amateur Radio community with contesting and general logging software since 1997.

 

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...

 

-----Original Message-----
From: Norm Fasoletos <
norm.k7nwf@...>
To:
N3FJPSoftwareUsers@groups.io
Sent: Wed, Jun 24, 2020 4:36 pm
Subject: Re: [N3FJPSoftwareUsers] Trying to set up FT-991 for rig control

Scott, tried some of the setting for Yaesu listed, got it to talk to the 991, however,now when i go back to WSJTX I have lost the com port i am using for the new software. I then unplug the usb cable from the computer, plug in back in, WSJTX is now working again, no problem. Now the new software says access denied to the port (same one that i set up originally) which is the same as the WSJTX. 

 

My next question, i am a little bit confused on how this software will work for me using WSJTX, along with JT Alert that does my logging and also having to manually log my contacts on n3JFP too. Am I missing something here?

 

73

 

Norm - K7NWF

 

 

On Wed, Jun 24, 2020 at 11:32 AM Scott Davis via groups.io <SNKDavis=aol.com@groups.io> wrote:

Hi Norm,

 

Thanks for your e-mail.  I don't have any Yaesu equipment here myself, but you will find the successful settings other 991 users have sent along here:

 

 

Enjoy!

73, Scott

N3FJP

 

Serving the Amateur Radio community with contesting and general logging software since 1997.

 

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...

 

-----Original Message-----
From: Norm Fasoletos <
norm.k7nwf@...>
To:
N3FJPSoftwareUsers@groups.io
Sent: Wed, Jun 24, 2020 2:15 pm
Subject: [N3FJPSoftwareUsers] Trying to set up FT-991 for rig control

Can't seem to get the FT-991 to talk to the N3FJP Field day software. This is my first set--up using this software so a little new at this. I have no problem running WSJTx with rig control, but no luck with the new software. Any help is appreciated.

73

Norm - K7NWF




Avast logo

This email has been checked for viruses by Avast antivirus software.
www.avast.com



Re: Trying to set up FT-991 for rig control

Norm Fasoletos <norm.k7nwf@...>
 

Thanks Scott, I will check it out and see if it helps...

73

Norm - K7NWF


On Wed, Jun 24, 2020 at 2:12 PM Scott Davis via groups.io <SNKDavis=aol.com@groups.io> wrote:
Hi Norm,

Thanks for your follow up.  If you configure my Field Day software with your digital programs as detailed in the following link, as you log the QSO in the digital software, it will be immediately logged in my software.  So, you will not need to transfer via ADIF, you will have immediate dupe checking, etc.


Enjoy Field Day!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Norm Fasoletos <norm.k7nwf@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Wed, Jun 24, 2020 5:06 pm
Subject: Re: [N3FJPSoftwareUsers] Trying to set up FT-991 for rig control

Hi Scott, so explain to me in simple terms what this software is going to do for me as compared to JT Alert which i use now. Looks like my contacts will not be auto logged using your software, I would have to manually enter the contacts. I plan on using FT8 for field day, so JT alert logs automatically and creates an ADI file.

What advantage do I gain from using your software unless doing SSB Phone?

Thanks,

Norm

On Wed, Jun 24, 2020 at 1:56 PM Scott Davis via groups.io <SNKDavis=aol.com@groups.io> wrote:
Hi Norm,

Thanks for your follow up.  If you are using the connected program to perform rig interface, from the N3FJP program menu options click Settings > Rig Interface and select None from the rig list.

If you are using rig interface from my software, to only have N3FJP Software respond to mode updates sent from the connected program, click Settings > Rig Interface. Under the Mode By options, select Don't Use. Also, check the check box that says "Don't send mode change with frequency".

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Norm Fasoletos <norm.k7nwf@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Wed, Jun 24, 2020 4:36 pm
Subject: Re: [N3FJPSoftwareUsers] Trying to set up FT-991 for rig control

Scott, tried some of the setting for Yaesu listed, got it to talk to the 991, however,now when i go back to WSJTX I have lost the com port i am using for the new software. I then unplug the usb cable from the computer, plug in back in, WSJTX is now working again, no problem. Now the new software says access denied to the port (same one that i set up originally) which is the same as the WSJTX. 

My next question, i am a little bit confused on how this software will work for me using WSJTX, along with JT Alert that does my logging and also having to manually log my contacts on n3JFP too. Am I missing something here?

73

Norm - K7NWF


On Wed, Jun 24, 2020 at 11:32 AM Scott Davis via groups.io <SNKDavis=aol.com@groups.io> wrote:
Hi Norm,

Thanks for your e-mail.  I don't have any Yaesu equipment here myself, but you will find the successful settings other 991 users have sent along here:


Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Norm Fasoletos <norm.k7nwf@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Wed, Jun 24, 2020 2:15 pm
Subject: [N3FJPSoftwareUsers] Trying to set up FT-991 for rig control

Can't seem to get the FT-991 to talk to the N3FJP Field day software. This is my first set--up using this software so a little new at this. I have no problem running WSJTx with rig control, but no luck with the new software. Any help is appreciated.

73

Norm - K7NWF


Re: Trying to set up FT-991 for rig control

Scott Davis
 

Hi Norm,

Thanks for your follow up.  If you configure my Field Day software with your digital programs as detailed in the following link, as you log the QSO in the digital software, it will be immediately logged in my software.  So, you will not need to transfer via ADIF, you will have immediate dupe checking, etc.


Enjoy Field Day!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Norm Fasoletos <norm.k7nwf@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Wed, Jun 24, 2020 5:06 pm
Subject: Re: [N3FJPSoftwareUsers] Trying to set up FT-991 for rig control

Hi Scott, so explain to me in simple terms what this software is going to do for me as compared to JT Alert which i use now. Looks like my contacts will not be auto logged using your software, I would have to manually enter the contacts. I plan on using FT8 for field day, so JT alert logs automatically and creates an ADI file.

What advantage do I gain from using your software unless doing SSB Phone?

Thanks,

Norm

On Wed, Jun 24, 2020 at 1:56 PM Scott Davis via groups.io <SNKDavis=aol.com@groups.io> wrote:
Hi Norm,

Thanks for your follow up.  If you are using the connected program to perform rig interface, from the N3FJP program menu options click Settings > Rig Interface and select None from the rig list.

If you are using rig interface from my software, to only have N3FJP Software respond to mode updates sent from the connected program, click Settings > Rig Interface. Under the Mode By options, select Don't Use. Also, check the check box that says "Don't send mode change with frequency".

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Norm Fasoletos <norm.k7nwf@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Wed, Jun 24, 2020 4:36 pm
Subject: Re: [N3FJPSoftwareUsers] Trying to set up FT-991 for rig control

Scott, tried some of the setting for Yaesu listed, got it to talk to the 991, however,now when i go back to WSJTX I have lost the com port i am using for the new software. I then unplug the usb cable from the computer, plug in back in, WSJTX is now working again, no problem. Now the new software says access denied to the port (same one that i set up originally) which is the same as the WSJTX. 

My next question, i am a little bit confused on how this software will work for me using WSJTX, along with JT Alert that does my logging and also having to manually log my contacts on n3JFP too. Am I missing something here?

73

Norm - K7NWF


On Wed, Jun 24, 2020 at 11:32 AM Scott Davis via groups.io <SNKDavis=aol.com@groups.io> wrote:
Hi Norm,

Thanks for your e-mail.  I don't have any Yaesu equipment here myself, but you will find the successful settings other 991 users have sent along here:


Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Norm Fasoletos <norm.k7nwf@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Wed, Jun 24, 2020 2:15 pm
Subject: [N3FJPSoftwareUsers] Trying to set up FT-991 for rig control

Can't seem to get the FT-991 to talk to the N3FJP Field day software. This is my first set--up using this software so a little new at this. I have no problem running WSJTx with rig control, but no luck with the new software. Any help is appreciated.

73

Norm - K7NWF


Re: Trying to set up FT-991 for rig control

Norm Fasoletos <norm.k7nwf@...>
 

Hi Scott, so explain to me in simple terms what this software is going to do for me as compared to JT Alert which i use now. Looks like my contacts will not be auto logged using your software, I would have to manually enter the contacts. I plan on using FT8 for field day, so JT alert logs automatically and creates an ADI file.

What advantage do I gain from using your software unless doing SSB Phone?

Thanks,

Norm

On Wed, Jun 24, 2020 at 1:56 PM Scott Davis via groups.io <SNKDavis=aol.com@groups.io> wrote:
Hi Norm,

Thanks for your follow up.  If you are using the connected program to perform rig interface, from the N3FJP program menu options click Settings > Rig Interface and select None from the rig list.

If you are using rig interface from my software, to only have N3FJP Software respond to mode updates sent from the connected program, click Settings > Rig Interface. Under the Mode By options, select Don't Use. Also, check the check box that says "Don't send mode change with frequency".

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Norm Fasoletos <norm.k7nwf@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Wed, Jun 24, 2020 4:36 pm
Subject: Re: [N3FJPSoftwareUsers] Trying to set up FT-991 for rig control

Scott, tried some of the setting for Yaesu listed, got it to talk to the 991, however,now when i go back to WSJTX I have lost the com port i am using for the new software. I then unplug the usb cable from the computer, plug in back in, WSJTX is now working again, no problem. Now the new software says access denied to the port (same one that i set up originally) which is the same as the WSJTX. 

My next question, i am a little bit confused on how this software will work for me using WSJTX, along with JT Alert that does my logging and also having to manually log my contacts on n3JFP too. Am I missing something here?

73

Norm - K7NWF


On Wed, Jun 24, 2020 at 11:32 AM Scott Davis via groups.io <SNKDavis=aol.com@groups.io> wrote:
Hi Norm,

Thanks for your e-mail.  I don't have any Yaesu equipment here myself, but you will find the successful settings other 991 users have sent along here:


Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Norm Fasoletos <norm.k7nwf@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Wed, Jun 24, 2020 2:15 pm
Subject: [N3FJPSoftwareUsers] Trying to set up FT-991 for rig control

Can't seem to get the FT-991 to talk to the N3FJP Field day software. This is my first set--up using this software so a little new at this. I have no problem running WSJTx with rig control, but no luck with the new software. Any help is appreciated.

73

Norm - K7NWF


Re: Trying to set up FT-991 for rig control

Scott Davis
 

Hi Norm,

Thanks for your follow up.  If you are using the connected program to perform rig interface, from the N3FJP program menu options click Settings > Rig Interface and select None from the rig list.

If you are using rig interface from my software, to only have N3FJP Software respond to mode updates sent from the connected program, click Settings > Rig Interface. Under the Mode By options, select Don't Use. Also, check the check box that says "Don't send mode change with frequency".

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Norm Fasoletos <norm.k7nwf@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Wed, Jun 24, 2020 4:36 pm
Subject: Re: [N3FJPSoftwareUsers] Trying to set up FT-991 for rig control

Scott, tried some of the setting for Yaesu listed, got it to talk to the 991, however,now when i go back to WSJTX I have lost the com port i am using for the new software. I then unplug the usb cable from the computer, plug in back in, WSJTX is now working again, no problem. Now the new software says access denied to the port (same one that i set up originally) which is the same as the WSJTX. 

My next question, i am a little bit confused on how this software will work for me using WSJTX, along with JT Alert that does my logging and also having to manually log my contacts on n3JFP too. Am I missing something here?

73

Norm - K7NWF


On Wed, Jun 24, 2020 at 11:32 AM Scott Davis via groups.io <SNKDavis=aol.com@groups.io> wrote:
Hi Norm,

Thanks for your e-mail.  I don't have any Yaesu equipment here myself, but you will find the successful settings other 991 users have sent along here:


Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Norm Fasoletos <norm.k7nwf@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Wed, Jun 24, 2020 2:15 pm
Subject: [N3FJPSoftwareUsers] Trying to set up FT-991 for rig control

Can't seem to get the FT-991 to talk to the N3FJP Field day software. This is my first set--up using this software so a little new at this. I have no problem running WSJTx with rig control, but no luck with the new software. Any help is appreciated.

73

Norm - K7NWF

5981 - 6000 of 48419