Date   

Re: Port Problems with JT Alert and Field day logger

Scott Davis
 

Hi Larry,

Thanks for your e-mail.  I'm sorry that you have run into trouble.

To clear the API error, first make sure no other programs, such as AC Log, are running and already using that port.  Then click Settings > Rig Interface and be sure the N3FJP API option is not selected.  Then click Settings > Transmit  > CW and again, make sure the N3FJP API option is not selected.

To clear the JTAlert log verification error, use the Remote Network PC option detailed here:

http://www.n3fjp.com/help/digitalsetup.html#jtalert

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Larry Krist <larrykrist@...>
To: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io>
Sent: Tue, Jun 23, 2020 3:14 am
Subject: [N3FJPSoftwareUsers] Port Problems with JT Alert and Field day logger

I have a computer that will not seem to work with JT Alert and the N3FJP
ARRL Field Day Logger. It gives me the error from N3FJP Field Day Logger
6.3 that says This program's server is already running on port 1100,
please click settings.API to select another port for the client to use
bla bla bla.. IF I click ok on the error message, it logs into the N3FJP
logger, but I get a message from JT Alert saying it cannot be verified
it was logged. I have several computers all setup and networked together
using tcp[that work fine and all are exactly the same setup. This is the
only one giving me problems.  I have tried disabling the virus software
to no avail. Any suggestions would be appreciated.

Thanks,

Larry  N8CWU




Re: How to only view DX stations?

Scott Davis
 

Hi Andrew,

Thanks for your e-mail.  Sorry, AC Log doesn't currently have any NOT logic functionality.

I'm sorry that I didn't have the answer that you were looking for.

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Andrew K8AKC via groups.io <K8AKC@...>
To: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io>
Sent: Tue, Jun 23, 2020 1:57 am
Subject: Re: [N3FJPSoftwareUsers] How to only view DX stations?

In the full log I would like it to only show my QSOs with DX stations. I can get it to show all of one country at a time, but I can't seem to use (NOT) USA.

73,
Andrew K8AKC



Port Problems with JT Alert and Field day logger

Larry Krist - N8CWU
 

I have a computer that will not seem to work with JT Alert and the N3FJP ARRL Field Day Logger. It gives me the error from N3FJP Field Day Logger 6.3 that says This program's server is already running on port 1100, please click settings.API to select another port for the client to use bla bla bla.. IF I click ok on the error message, it logs into the N3FJP logger, but I get a message from JT Alert saying it cannot be verified it was logged. I have several computers all setup and networked together using tcp[that work fine and all are exactly the same setup. This is the only one giving me problems.  I have tried disabling the virus software to no avail. Any suggestions would be appreciated.

Thanks,

Larry  N8CWU


Re: How to only view DX stations?

Andrew K8AKC
 

In the full log I would like it to only show my QSOs with DX stations. I can get it to show all of one country at a time, but I can't seem to use (NOT) USA.

73,
Andrew K8AKC



Re: How to only view DX stations?

Mike Olbrisch
 

Not quite certain just what you are asking – but if it is total countries you have worked,  click AWARDS à STATES COUNTIES COUNTRIES.  Add any filters in the boxes provided, like a single band or QRP etc, and click CALCULATE.

If that isn’t what you are asking, then please try again.

The way I prefer to “View countries other than mine” is on vacation, but somehow I’m thinking that wasn’t what you were asking for 😊.

 

 

Mike – KD5KC -- El Paso -- Texas.

 

The canyons are calling, colorful and deep.  But I have promises to keep.

And miles to go still in my Jeep...   And miles to go still in my Jeep...

 

 

ADVENTURE:  The respectful pursuit of trouble.

 

 

 

 

From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of Andrew K8AKC via groups.io
Sent: Monday, June 22, 2020 22:41 PM
To: N3FJPSoftwareUsers@groups.io
Subject: [N3FJPSoftwareUsers] How to only view DX stations?

 

In ACL I would like to view countries other than mine, is there a way to do this?

Thanks and 73.
Andrew K8AKC


How to only view DX stations?

Andrew K8AKC
 

In ACL I would like to view countries other than mine, is there a way to do this?

Thanks and 73.
Andrew K8AKC


Re: Interface With ICOM IC-9700

Jeff (KO4DCO)
 

Scott,
Thanks for the prompt reply. Hopefully, you're getting some rest in advance of this weekend.
I restarted today and all seems well with the world.
73s,
Jeff, KO4DCO


Re: ACLog wants to Upload Old Log Entries

Scott Davis
 

H Bryan,

Thanks for your follow up.  Just multi select all the QSOs you want to be treated as having been uploaded from the main form.  Then click Edit > Mark Selected Records as QSO > Sent and enter a capital L in the confirmation type.

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: VE3QN <ars.ve3qn@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Mon, Jun 22, 2020 3:02 pm
Subject: Re: [N3FJPSoftwareUsers] ACLog wants to Upload Old Log Entries

Thank you, Scott. I have done as suggested and all of my entries where VE3QN is shown as Operator now show "L" in the "S Conf By" column. There are, however, a few hundred entries under my previous callsign VE3RBE (at this location) and for these the "S Conf By" column is blank. When I attempt to upload to LoTW using the "All Contacts Not Uploaded" option I get a notice highlighting the VE3RBE entries. (See attached screenshot). I'm not sure what to do here. All the VE3RBE log entries were uploaded to LoTW several years ago and I subsequently let the callsign certificate for VE3RBE lapse. Now I am not sure what will happen if I select either of the options offered. I'm not sure I want to reload all the VE3RBE options and it's possible they won't be accepted since the callsign certificate is no longer valid. I don't want them uploaded as entries from VE3QN. What I do want is for them to be treated as having been uploaded such that when I click on the "All Contacts ..." button N3FJP only offers my new contacts. I'd be grateful for your advice. Thanks in advance. Bryan  VE3QN


Re: ACLog wants to Upload Old Log Entries

VE3QN
 

Thank you, Scott. I have done as suggested and all of my entries where VE3QN is shown as Operator now show "L" in the "S Conf By" column. There are, however, a few hundred entries under my previous callsign VE3RBE (at this location) and for these the "S Conf By" column is blank. When I attempt to upload to LoTW using the "All Contacts Not Uploaded" option I get a notice highlighting the VE3RBE entries. (See attached screenshot). I'm not sure what to do here. All the VE3RBE log entries were uploaded to LoTW several years ago and I subsequently let the callsign certificate for VE3RBE lapse. Now I am not sure what will happen if I select either of the options offered. I'm not sure I want to reload all the VE3RBE options and it's possible they won't be accepted since the callsign certificate is no longer valid. I don't want them uploaded as entries from VE3QN. What I do want is for them to be treated as having been uploaded such that when I click on the "All Contacts ..." button N3FJP only offers my new contacts. I'd be grateful for your advice. Thanks in advance. Bryan  VE3QN


Re: LoTW Manager keyboard shortcut in AClog 6.6

Scott Davis
 

Thanks for the suggestion Poul!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Poul K <sa7cnd@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Mon, Jun 22, 2020 4:27 am
Subject: [N3FJPSoftwareUsers] LoTW Manager keyboard shortcut in AClog 6.6

For AClog 6.6, may I suggest you change the Alt-D shortcut in LoTW Manager 1.9 from Add station location to Done? (There are 2 underlined D shortcuts)

This is the way it works with the other eLog handlers in AClog, very conventient.
73 de SA7CND


Re: How Long After Logging Does ACLog Send to LOTW, etc.?

Scott Davis
 

Hi Dennis,

Thanks for your e-mail.  Real time uploads occur within one second after pressing enter.  When real time uploading is not enabled, the uploads don't occur until you initiate the upload.

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Dennis Younker NE6I <NE6I@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Sun, Jun 21, 2020 9:25 pm
Subject: [N3FJPSoftwareUsers] How Long After Logging Does ACLog Send to LOTW, etc.?

Sorry if I missed this but how long after one logs a QSO in ACLog does the software upload to LOTW and ACLog? I have had a couple of instances of logging the wrong call or QSO info, and quickly going back to delete or edit the QSO. I have never been sure as to whether I have beaten the upload. I poked around and do not see that this is configurable. One can of course Enable Realtime Upload (and I have) but does that mean immediately after logging a QSO or is there some slight delay? Same question for eQSL and ClubLog.
 
--Dennis NE6I


LoTW Manager keyboard shortcut in AClog 6.6

Poul K
 

For AClog 6.6, may I suggest you change the Alt-D shortcut in LoTW Manager 1.9 from Add station location to Done? (There are 2 underlined D shortcuts)

This is the way it works with the other eLog handlers in AClog, very conventient.
73 de SA7CND


Re: Rig Control Failure FD Mode with WSJT-X, N3FJP and JTAlert

Michael WA7SKG
 

So I installed flrig v 1.3.50. I fire it up and tell the applications to use flrig for radio type. The problem now is, flrig won't run longer than about 2 minutes before it spontaneously shuts down. No clue, no error, just poof, it's gone. I can't keep it running long enough to see if the other apps are actually working through it.

Michael WA7SKG


Jeff Grantham wrote on 6/21/20 5:26 PM:

Not sure if I was clear. Once you get FLRig running select that as your radio in wsjtx and fldigi
Get Outlook for iOS <https://aka.ms/o0ukef>
------------------------------------------------------------------------
*From:* N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> on behalf of Larry Banks via groups.io <larryb.w1dyj=verizon.net@groups.io>
*Sent:* Sunday, June 21, 2020 7:25:49 PM
*To:* N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io>
*Subject:* Re: [N3FJPSoftwareUsers] Rig Control Failure FD Mode with WSJT-X, N3FJP and JTAlert
Hi Michael,
I start JTAlert and then have it start WSJT-X and then whichever N3FJP
program I am using at the time, in that order.  WSJT-X does the rig
interfacing.
73 -- Larry -- W1DYJ
-----Original Message-----
From: Michael WA7SKG
Sent: Sunday, June 21, 2020 19:47
To: N3FJPSoftwareUsers@groups.io
Subject: [N3FJPSoftwareUsers] Rig Control Failure FD Mode with WSJT-X, N3FJP
and JTAlert
Getting ready for Field Day. I have the latest versions of WSJT-X
(2.2.1), JTAlert (2.16.8), and N3FJP Field Day Log (6.3).
My understanding is to start N3FJP > WSJT-X > JTAlert in that order. I
have followed the various tutorials and instructions for setting these
up. When I start WSJT-X, I get a "Rig Control Error" box asking to set
up the rig parameters (IC-7300). These are all correct. Running WSJT-X
by itself is no problem. Only when N3FJP is running do I have an issue.
I am obviously missing something. Any suggestions as to what?
--
73,
Michael WA7SKG
"Any day you do not learn one new thing is a wasted day."


How Long After Logging Does ACLog Send to LOTW, etc.?

Dennis Younker NE6I
 

Sorry if I missed this but how long after one logs a QSO in ACLog does the software upload to LOTW and ACLog? I have had a couple of instances of logging the wrong call or QSO info, and quickly going back to delete or edit the QSO. I have never been sure as to whether I have beaten the upload. I poked around and do not see that this is configurable. One can of course Enable Realtime Upload (and I have) but does that mean immediately after logging a QSO or is there some slight delay? Same question for eQSL and ClubLog.

 

--Dennis NE6I


Re: Rig Control Failure FD Mode with WSJT-X, N3FJP and JTAlert

Larry Banks
 

Hi Michael,

You need to set JTAlert to automatically start WSJT-X and then N3FJP, with appropriate delays. In JTAlert: Settings >> Manage Settings >> Applications >> Auto-start. I use 1500 ms for WSJT-X and 15000 ms for whichever N3FJP program I am using at the time. WSJT-X does the rig interface and JTAlert does the logging to N3FJP.

Larry / W1DYJ

-----Original Message-----
From: Michael WA7SKG
Sent: Sunday, June 21, 2020 20:37
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] Rig Control Failure FD Mode with WSJT-X, N3FJP and JTAlert

When I try to start JTAlert first, I get a box that says "WSJT-X must be
running before JTAlert can continue." Also, all instructions regarding
N3FJP say it must be running before the digital program is started for
the logging API to work.

Michael WA7SKG


Larry Banks via groups.io wrote on 6/21/20 5:25 PM:
Hi Michael,

I start JTAlert and then have it start WSJT-X and then whichever N3FJP program I am using at the time, in that order. WSJT-X does the rig interfacing.

73 -- Larry -- W1DYJ




-----Original Message----- From: Michael WA7SKG
Sent: Sunday, June 21, 2020 19:47
To: N3FJPSoftwareUsers@groups.io
Subject: [N3FJPSoftwareUsers] Rig Control Failure FD Mode with WSJT-X, N3FJP and JTAlert

Getting ready for Field Day. I have the latest versions of WSJT-X
(2.2.1), JTAlert (2.16.8), and N3FJP Field Day Log (6.3).

My understanding is to start N3FJP > WSJT-X > JTAlert in that order. I
have followed the various tutorials and instructions for setting these
up. When I start WSJT-X, I get a "Rig Control Error" box asking to set
up the rig parameters (IC-7300). These are all correct. Running WSJT-X
by itself is no problem. Only when N3FJP is running do I have an issue.

I am obviously missing something. Any suggestions as to what?


Re: Rig Control Failure FD Mode with WSJT-X, N3FJP and JTAlert

Michael WA7SKG
 

When I try to start JTAlert first, I get a box that says "WSJT-X must be running before JTAlert can continue." Also, all instructions regarding N3FJP say it must be running before the digital program is started for the logging API to work.

Michael WA7SKG


Larry Banks via groups.io wrote on 6/21/20 5:25 PM:

Hi Michael,
I start JTAlert and then have it start WSJT-X and then whichever N3FJP program I am using at the time, in that order.  WSJT-X does the rig interfacing.
73 -- Larry -- W1DYJ
-----Original Message----- From: Michael WA7SKG
Sent: Sunday, June 21, 2020 19:47
To: N3FJPSoftwareUsers@groups.io
Subject: [N3FJPSoftwareUsers] Rig Control Failure FD Mode with WSJT-X, N3FJP and JTAlert
Getting ready for Field Day. I have the latest versions of WSJT-X
(2.2.1), JTAlert (2.16.8), and N3FJP Field Day Log (6.3).
My understanding is to start N3FJP > WSJT-X > JTAlert in that order. I
have followed the various tutorials and instructions for setting these
up. When I start WSJT-X, I get a "Rig Control Error" box asking to set
up the rig parameters (IC-7300). These are all correct. Running WSJT-X
by itself is no problem. Only when N3FJP is running do I have an issue.
I am obviously missing something. Any suggestions as to what?


Re: Rig Control Failure FD Mode with WSJT-X, N3FJP and JTAlert

KB5WCK
 

Not sure if I was clear. Once you get FLRig running select that as your radio in wsjtx and fldigi


From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> on behalf of Larry Banks via groups.io <larryb.w1dyj@...>
Sent: Sunday, June 21, 2020 7:25:49 PM
To: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io>
Subject: Re: [N3FJPSoftwareUsers] Rig Control Failure FD Mode with WSJT-X, N3FJP and JTAlert
 
Hi Michael,

I start JTAlert and then have it start WSJT-X and then whichever N3FJP
program I am using at the time, in that order.  WSJT-X does the rig
interfacing.

73 -- Larry -- W1DYJ




-----Original Message-----
From: Michael WA7SKG
Sent: Sunday, June 21, 2020 19:47
To: N3FJPSoftwareUsers@groups.io
Subject: [N3FJPSoftwareUsers] Rig Control Failure FD Mode with WSJT-X, N3FJP
and JTAlert

Getting ready for Field Day. I have the latest versions of WSJT-X
(2.2.1), JTAlert (2.16.8), and N3FJP Field Day Log (6.3).

My understanding is to start N3FJP > WSJT-X > JTAlert in that order. I
have followed the various tutorials and instructions for setting these
up. When I start WSJT-X, I get a "Rig Control Error" box asking to set
up the rig parameters (IC-7300). These are all correct. Running WSJT-X
by itself is no problem. Only when N3FJP is running do I have an issue.

I am obviously missing something. Any suggestions as to what?

--
73,
Michael WA7SKG

"Any day you do not learn one new thing is a wasted day."

 





Re: Rig Control Failure FD Mode with WSJT-X, N3FJP and JTAlert

Larry Banks
 

Hi Michael,

I start JTAlert and then have it start WSJT-X and then whichever N3FJP program I am using at the time, in that order. WSJT-X does the rig interfacing.

73 -- Larry -- W1DYJ

-----Original Message-----
From: Michael WA7SKG
Sent: Sunday, June 21, 2020 19:47
To: N3FJPSoftwareUsers@groups.io
Subject: [N3FJPSoftwareUsers] Rig Control Failure FD Mode with WSJT-X, N3FJP and JTAlert

Getting ready for Field Day. I have the latest versions of WSJT-X
(2.2.1), JTAlert (2.16.8), and N3FJP Field Day Log (6.3).

My understanding is to start N3FJP > WSJT-X > JTAlert in that order. I
have followed the various tutorials and instructions for setting these
up. When I start WSJT-X, I get a "Rig Control Error" box asking to set
up the rig parameters (IC-7300). These are all correct. Running WSJT-X
by itself is no problem. Only when N3FJP is running do I have an issue.

I am obviously missing something. Any suggestions as to what?

--
73,
Michael WA7SKG

"Any day you do not learn one new thing is a wasted day."


Re: Rig Control Failure FD Mode with WSJT-X, N3FJP and JTAlert

KB5WCK
 

Not sure if you can but if you get FLRIG running and then select that in WSJTX and fldigi you will be fine.


From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> on behalf of Michael WA7SKG via groups.io <wa7skg@...>
Sent: Sunday, June 21, 2020 7:20:36 PM
To: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io>
Subject: Re: [N3FJPSoftwareUsers] Rig Control Failure FD Mode with WSJT-X, N3FJP and JTAlert
 
Thanks, Scott. Here's where I run into additional confusion. Most of the
time, I will be running phone. I will occasionally fire up WSJT-X and do
some FT8 and I may also use fldigi for PSK31. Normally, I do not have
the digital apps running when I am not using them.

I can start and stop fldigi without issue. It is only WSJT-X I have
problems with.

Michael WA7SKG


Scott Davis via groups.io wrote on 6/21/20 4:58 PM:
> Hi Michael,
>
> Thanks for your e-mail.  If you are using rig interface from my
> software, to only have N3FJP Software respond to mode updates sent from
> the connected program, click Settings > Rig Interface. Under the Mode By
> options, select Don't Use. Also, check the check box that says "Don't
> send mode change with frequency".
>
> If you will have WSJT connected for rig interface, from the rig list in
> N3FJP, select None.
>
> Enjoy!
>
> 73, Scott
> N3FJP
> _http://www.n3fjp.com_ <http://www.n3fjp.com/>
>
> /Serving the Amateur Radio community with contesting and general logging
> software since 1997./
>
> 1 Peter 3 vs 15: /Always be prepared to give an answer to everyone who
> asks you to give _the reason for <http://www.n3fjp.com/Faith.htm>the
> hope that you have <http://www.n3fjp.com/Faith.htm>_. But do this with
> gentleness and respect/...
>
>
> -----Original Message-----
> From: Michael WA7SKG <wa7skg@...>
> To: N3FJPSoftwareUsers@groups.io
> Sent: Sun, Jun 21, 2020 7:47 pm
> Subject: [N3FJPSoftwareUsers] Rig Control Failure FD Mode with WSJT-X,
> N3FJP and JTAlert
>
> Getting ready for Field Day. I have the latest versions of WSJT-X
> (2.2.1), JTAlert (2.16.8), and N3FJP Field Day Log (6.3).
>
> My understanding is to start N3FJP > WSJT-X > JTAlert in that order. I
> have followed the various tutorials and instructions for setting these
> up. When I start WSJT-X, I get a "Rig Control Error" box asking to set
> up the rig parameters (IC-7300). These are all correct. Running WSJT-X
> by itself is no problem. Only when N3FJP is running do I have an issue.
>
> I am obviously missing something. Any suggestions as to what?
>
> --
> 73,
> Michael WA7SKG
>
> "Any day you do not learn one new thing is a wasted day."
>
>
>
>




Re: Rig Control Failure FD Mode with WSJT-X, N3FJP and JTAlert

Michael WA7SKG
 

Thanks, Scott. Here's where I run into additional confusion. Most of the time, I will be running phone. I will occasionally fire up WSJT-X and do some FT8 and I may also use fldigi for PSK31. Normally, I do not have the digital apps running when I am not using them.

I can start and stop fldigi without issue. It is only WSJT-X I have problems with.

Michael WA7SKG


Scott Davis via groups.io wrote on 6/21/20 4:58 PM:

Hi Michael,
Thanks for your e-mail.  If you are using rig interface from my software, to only have N3FJP Software respond to mode updates sent from the connected program, click Settings > Rig Interface. Under the Mode By options, select Don't Use. Also, check the check box that says "Don't send mode change with frequency".
If you will have WSJT connected for rig interface, from the rig list in N3FJP, select None.
Enjoy!
73, Scott
N3FJP
_http://www.n3fjp.com_ <http://www.n3fjp.com/>
/Serving the Amateur Radio community with contesting and general logging software since 1997./
1 Peter 3 vs 15: /Always be prepared to give an answer to everyone who asks you to give _the reason for <http://www.n3fjp.com/Faith.htm>the hope that you have <http://www.n3fjp.com/Faith.htm>_. But do this with gentleness and respect/...
-----Original Message-----
From: Michael WA7SKG <wa7skg@wa7skg.com>
To: N3FJPSoftwareUsers@groups.io
Sent: Sun, Jun 21, 2020 7:47 pm
Subject: [N3FJPSoftwareUsers] Rig Control Failure FD Mode with WSJT-X, N3FJP and JTAlert
Getting ready for Field Day. I have the latest versions of WSJT-X
(2.2.1), JTAlert (2.16.8), and N3FJP Field Day Log (6.3).
My understanding is to start N3FJP > WSJT-X > JTAlert in that order. I
have followed the various tutorials and instructions for setting these
up. When I start WSJT-X, I get a "Rig Control Error" box asking to set
up the rig parameters (IC-7300). These are all correct. Running WSJT-X
by itself is no problem. Only when N3FJP is running do I have an issue.
I am obviously missing something. Any suggestions as to what?
--
73,
Michael WA7SKG
"Any day you do not learn one new thing is a wasted day."

6181 - 6200 of 48561