|
Re: DELEWARE QSO OUT OF STATE
Pat Whelton
Mike I know I’m not supposed to carry on conversations in this reflector “but” I have to respectfully disagree with your suggestion. Have you checked out the length of the footer on Scott’s support messages? At last count the footers are 25 lines long (including lines and spaces). In the old days that would have really been frowned upon. At least by BBS operators anyway.
Regards,
Pat – KZ5J
From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of Mike Olbrisch
Sent: Wednesday, April 29, 2020 9:55 AM To: N3FJPSoftwareUsers@groups.io Subject: Re: [N3FJPSoftwareUsers] DELEWARE QSO OUT OF STATE
Suggestion Scott. Make it policy that all support is handled through the reflector. Then those of us capable can try to head off the easy ones.
“N3FJP HELP FILES are available at http://www.SomeDomain.xyz”.
Stay safe, stay healthy!
Mike.
From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of Scott Davis via groups.io
Hi Mike,
I very, very much appreciate all who chime in and help here! It makes a big difference and I can't thank you enough!
Unfortunately, e-mail via this support group only represents a small percentage of my daily e-mail support volume.
Thanks again!
Enjoy! 73, Scott N3FJP
Serving the Amateur Radio community with contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...
-----Original Message----- Sorry about the Support load Scott. Some of us try to head off the stuff we know. But no one is as expert as you. Without your direct intervention several years ago, I would have been stuck on version 3.x until I changed computers. Who would have ever suspected a missing FONT would cause a failure to load!
Stay safe, stay healthy. We’ll continue to help when we can.
Mike – KD5KC -- El Paso -- Texas.
The canyons are calling, colorful and deep. But I have promises to keep. And miles to go still in my Jeep... And miles to go still in my Jeep...
ADVENTURE: The respectful pursuit of trouble.
From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of Scott Davis via groups.io
Hi Dave,
Thanks for your e-mail. I had hoped to support DE again (I used to, but had to drop DE support after a rule change) before their contest this time, but with all the other projects, and especially the daily, overflowing support e-mail volume, there just hasn't been close to an opportunity for the coding time required.
Please see this FAQ here:
Enjoy! 73, Scott N3FJP
Serving the Amateur Radio community with contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...
-----Original Message----- Hey Scott, What software would you suggest for me being in Delaware and operating the QSO party. Dave KC3AM On 04/28/2020 16:24, Scott Davis via groups.io wrote: Hi Mel,
Thanks for your e-mail. Sorry, I don't currently support the DE party at this time.
73, Scott N3FJP
Serving the Amateur Radio community with contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...
-----Original Message----- I am unable to locate the deleware out of state qso part logging program
Mel NE9A
--
|
|
|
|
Set Up
webmaster@...
Don’t see the word “folder” anywhere. Is the idea to have a separate folder on the ftp server one for each band (talking field day here)? It does it work with just one folder, or no folders? Looks like we’re all going to be Field Daying from our individual back yards. Thus the questions about folders. Also you can’t get to our ftp space the usual way ftp://www.w9dup.org. Our hosting service says our ftp address is something like home33505542x.1and1-Dara.host
Any help greatly aporeciated! Dave N9DMS webmaster DARC
|
|
|
|
Re: DELEWARE QSO OUT OF STATE
Suggestion Scott. Make it policy that all support is handled through the reflector. Then those of us capable can try to head off the easy ones.
“N3FJP HELP FILES are available at http://www.SomeDomain.xyz”.
Stay safe, stay healthy!
Mike.
From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of Scott Davis via groups.io
Sent: Wednesday, April 29, 2020 8:38 AM To: N3FJPSoftwareUsers@groups.io Subject: Re: [N3FJPSoftwareUsers] DELEWARE QSO OUT OF STATE
Hi Mike,
I very, very much appreciate all who chime in and help here! It makes a big difference and I can't thank you enough!
Unfortunately, e-mail via this support group only represents a small percentage of my daily e-mail support volume.
Thanks again!
Enjoy! 73, Scott N3FJP
Serving the Amateur Radio community with contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...
-----Original Message----- Sorry about the Support load Scott. Some of us try to head off the stuff we know. But no one is as expert as you. Without your direct intervention several years ago, I would have been stuck on version 3.x until I changed computers. Who would have ever suspected a missing FONT would cause a failure to load!
Stay safe, stay healthy. We’ll continue to help when we can.
Mike – KD5KC -- El Paso -- Texas.
The canyons are calling, colorful and deep. But I have promises to keep. And miles to go still in my Jeep... And miles to go still in my Jeep...
ADVENTURE: The respectful pursuit of trouble.
From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of Scott Davis via groups.io
Hi Dave,
Thanks for your e-mail. I had hoped to support DE again (I used to, but had to drop DE support after a rule change) before their contest this time, but with all the other projects, and especially the daily, overflowing support e-mail volume, there just hasn't been close to an opportunity for the coding time required.
Please see this FAQ here:
Enjoy! 73, Scott N3FJP
Serving the Amateur Radio community with contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...
-----Original Message----- Hey Scott, What software would you suggest for me being in Delaware and operating the QSO party. Dave KC3AM On 04/28/2020 16:24, Scott Davis via groups.io wrote: Hi Mel,
Thanks for your e-mail. Sorry, I don't currently support the DE party at this time.
73, Scott N3FJP
Serving the Amateur Radio community with contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...
-----Original Message----- I am unable to locate the deleware out of state qso part logging program
Mel NE9A
--
|
|
|
|
Re: DELEWARE QSO OUT OF STATE
Scott Davis
Hi Mike,
I very, very much appreciate all who chime in and help here! It makes a big difference and I can't thank you enough!
Unfortunately, e-mail via this support group only represents a small percentage of my daily e-mail support volume.
Thanks again!
Enjoy! 73, Scott
N3FJP
Serving the Amateur Radio community with contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...
-----Original Message-----
From: Mike Olbrisch <mike-2020@...> To: N3FJPSoftwareUsers@groups.io Sent: Wed, Apr 29, 2020 10:32 am Subject: Re: [N3FJPSoftwareUsers] DELEWARE QSO OUT OF STATE Sorry about the Support load Scott. Some of us try to head off the stuff we know. But no one is as expert as you. Without your direct intervention several years ago, I would have been stuck on version 3.x until I changed computers. Who would have ever suspected a missing FONT would cause a failure to load!
Stay safe, stay healthy. We’ll continue to help when we can.
Mike – KD5KC -- El Paso -- Texas.
The canyons are calling, colorful and deep. But I have promises to keep.
And miles to go still in my Jeep... And miles to go still in my Jeep...
ADVENTURE: The respectful pursuit of trouble.
From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of Scott Davis via groups.io
Sent: Wednesday, April 29, 2020 8:19 AM To: N3FJPSoftwareUsers@groups.io Subject: Re: [N3FJPSoftwareUsers] DELEWARE QSO OUT OF STATE Hi Dave,
Thanks for your e-mail. I had hoped to support DE again (I used to, but had to drop DE support after a rule change) before their contest this time, but with all the other projects, and especially the daily, overflowing support e-mail volume, there just hasn't been close to an opportunity for the coding time required.
Please see this FAQ here:
Enjoy!
73, Scott
N3FJP
Serving the Amateur Radio community with contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...
-----Original Message-----
From: Dave via groups.io <kc3am@...> To: N3FJPSoftwareUsers@groups.io Sent: Wed, Apr 29, 2020 9:07 am Subject: Re: [N3FJPSoftwareUsers] DELEWARE QSO OUT OF STATE Hey Scott,
What software would you suggest for me being in Delaware and operating the QSO party.
Dave KC3AM
On 04/28/2020 16:24, Scott Davis via groups.io wrote:
Hi Mel,
Thanks for your e-mail. Sorry, I don't currently support the DE party at this time.
73, Scott
N3FJP
Serving the Amateur Radio community with contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...
-----Original Message-----
From: Mel Marcus <melm@...> To: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> Sent: Tue, Apr 28, 2020 3:44 pm Subject: [N3FJPSoftwareUsers] DELEWARE QSO OUT OF STATE I am unable to locate the deleware out of state qso part logging program
Mel
NE9A
--
73, Dave KC3AM
|
|
|
|
Re: NU4N/qrp
Scott Davis
Hi Dave,
Dennis is correct. You can't use the / character as part of a file name. Just stick to letters and numbers and you will be fine.
Enjoy! 73, Scott
N3FJP
Serving the Amateur Radio community with contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...
-----Original Message-----
From: Dennis - WU6X <wu6x@...> To: N3FJPSoftwareUsers@groups.io Sent: Wed, Apr 29, 2020 9:33 am Subject: Re: [N3FJPSoftwareUsers] NU4N/qrp Hi Dave,
I just did something similar ... however, on Bart's suggestion at ARRL, I used my call only in TQSL, then "named" the station location during the last step in creating a new station in TSQL. Then, when uploading to LOTW from within N3FJP, I select the desired station location from the dropdown and everything worked just fine. In my case, I was trying to setup a "/4" for one of the remote bases I use on the East coast. Bart suggested I just use my call only, no appendage, and then name the new location appropriately in TSQL. Hopefully that works for you, 73, Dennis - WU6X
|
|
|
|
Re: DELEWARE QSO OUT OF STATE
Sorry about the Support load Scott. Some of us try to head off the stuff we know. But no one is as expert as you. Without your direct intervention several years ago, I would have been stuck on version 3.x until I changed computers. Who would have ever suspected a missing FONT would cause a failure to load!
Stay safe, stay healthy. We’ll continue to help when we can.
Mike – KD5KC -- El Paso -- Texas.
The canyons are calling, colorful and deep. But I have promises to keep. And miles to go still in my Jeep... And miles to go still in my Jeep...
ADVENTURE: The respectful pursuit of trouble.
From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of Scott Davis via groups.io
Sent: Wednesday, April 29, 2020 8:19 AM To: N3FJPSoftwareUsers@groups.io Subject: Re: [N3FJPSoftwareUsers] DELEWARE QSO OUT OF STATE
Hi Dave,
Thanks for your e-mail. I had hoped to support DE again (I used to, but had to drop DE support after a rule change) before their contest this time, but with all the other projects, and especially the daily, overflowing support e-mail volume, there just hasn't been close to an opportunity for the coding time required.
Please see this FAQ here:
Enjoy! 73, Scott N3FJP
Serving the Amateur Radio community with contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...
-----Original Message----- Hey Scott, What software would you suggest for me being in Delaware and operating the QSO party. Dave KC3AM On 04/28/2020 16:24, Scott Davis via groups.io wrote: Hi Mel,
Thanks for your e-mail. Sorry, I don't currently support the DE party at this time.
73, Scott N3FJP
Serving the Amateur Radio community with contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...
-----Original Message----- I am unable to locate the deleware out of state qso part logging program
Mel NE9A
--
|
|
|
|
Re: DELEWARE QSO OUT OF STATE
Scott Davis
Hi Dave,
Thanks for your e-mail. I had hoped to support DE again (I used to, but had to drop DE support after a rule change) before their contest this time, but with all the other projects, and especially the daily, overflowing support e-mail volume, there just hasn't been close to an opportunity for the coding time required.
Please see this FAQ here:
http://www.n3fjp.com/faq.html#q73
Enjoy! 73, Scott
N3FJP
Serving the Amateur Radio community with contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...
-----Original Message-----
From: Dave via groups.io <kc3am@...> To: N3FJPSoftwareUsers@groups.io Sent: Wed, Apr 29, 2020 9:07 am Subject: Re: [N3FJPSoftwareUsers] DELEWARE QSO OUT OF STATE Hey Scott,
What software would you suggest for me being in Delaware and
operating the QSO party.
Dave KC3AM
On 04/28/2020 16:24, Scott Davis via
groups.io wrote:
Hi
Mel,
Thanks for your e-mail. Sorry, I don't currently support
the DE party at this time.
73, Scott
N3FJP
Serving the Amateur Radio community with contesting
and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared
to give an answer to everyone who asks you to give the reason for the hope that you have.
But do this with gentleness and respect...
-----Original
Message-----
From: Mel Marcus <melm@...> To: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> Sent: Tue, Apr 28, 2020 3:44 pm Subject: [N3FJPSoftwareUsers] DELEWARE QSO OUT OF STATE I am unable to locate the deleware out of state
qso part logging program
Mel
NE9A
--
73, Dave KC3AM
|
|
|
|
Re: NU4N/qrp
Hi Dave,
I just did something similar ... however, on Bart's suggestion at ARRL, I used my call only in TQSL, then "named" the station location during the last step in creating a new station in TSQL. Then, when uploading to LOTW from within N3FJP, I select the desired station location from the dropdown and everything worked just fine. In my case, I was trying to setup a "/4" for one of the remote bases I use on the East coast. Bart suggested I just use my call only, no appendage, and then name the new location appropriately in TSQL. Hopefully that works for you, 73, Dennis - WU6X
|
|
|
|
Re: DELEWARE QSO OUT OF STATE
Dave
Hey Scott, What software would you suggest for me being in Delaware and operating the QSO party. Dave KC3AM
On 04/28/2020 16:24, Scott Davis via
groups.io wrote:
--
73, Dave KC3AM
|
|
|
|
NU4N/qrp
Hello Scott how are ya ?
Hey i made a new logbook using NU4N/qrp. But in the LOTW page I changed the call to NU4N/qrp with correct password and named the location qrp which match's the TQL locatiom. The upload works great but I get an error when I want download from LOTW. Any help apppreciated 73 Ya'll take care.
|
|
|
|
Re: DELEWARE QSO OUT OF STATE
Mel Marcus
That is ok . last time what I wanted was there but I did not see it. all set up for the upcoming qso parties this weekend. Best to you and Kim Mel
|
|
|
|
Re: DELEWARE QSO OUT OF STATE
Scott Davis
Hi Mel,
Thanks for your e-mail. Sorry, I don't currently support the DE party at this time.
73, Scott
N3FJP
Serving the Amateur Radio community with contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...
-----Original Message-----
From: Mel Marcus <melm@...> To: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> Sent: Tue, Apr 28, 2020 3:44 pm Subject: [N3FJPSoftwareUsers] DELEWARE QSO OUT OF STATE I am unable to locate the deleware out of state qso part logging program
Mel
NE9A
|
|
|
|
DELEWARE QSO OUT OF STATE
Mel Marcus
I am unable to locate the deleware out of state qso part logging program Mel NE9A
|
|
|
|
Re: Installation never completes.
ku4cg@...
Thanks Scott I got it working.
|
|
|
|
Re: ASlog w/ fldigi crashes on TX
Paul
Agreed, I have been working on that, still, cant see how it worked so well so long before problem arose. have lots of chokes. obviously need more.
|
|
|
|
Re: ASlog w/ fldigi crashes on TX
Scott Davis
Hi Paul,
Thanks for your e-mail. Those are classic symptoms of RF in the shack. You'll need to correct that before the software will function properly.
Good luck! 73, Scott
N3FJP
Serving the Amateur Radio community with contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...
-----Original Message-----
From: Paul <nh7wb@...> To: N3FJPSoftwareUsers@groups.io Sent: Tue, Apr 28, 2020 11:11 am Subject: [N3FJPSoftwareUsers] ASlog w/ fldigi crashes on TX all was working fine with ts-590s suddenly had fldigi freeze on TX with ant1, had to close and reopen , worked fine on ant2
then failed again on ant1. got error msg, cant remember but about conflict with com port? also lost rig control on AClog but could reestablish with settings. tried several times, same result.
|
|
|
|
ASlog w/ fldigi crashes on TX
Paul
all was working fine with ts-590s suddenly had fldigi freeze on TX with ant1, had to close and reopen , worked fine on ant2
then failed again on ant1. got error msg, cant remember but about conflict with com port? also lost rig control on AClog but could reestablish with settings. tried several times, same result.
|
|
|
|
Re: Partial Duplicate QSOs...
Scott Davis
Hi Dale,
Thanks for your e-mail. When you download records from LoTW, one of two things happen. Either existing records are marked appropriately (and not added a second time), or you will receive the prompt letting you know that one or more records not currently in your database were downloaded and give you the option to add them. If you answer No, then there won't be any additional records added.
The criteria for a match are as follows:
- The callsign must match the call of the station worked.
- The band must match the band of the station worked.
- The date and time in AC Log must match the date and time on the LoTW record.
Note that to speed processing, once AC Log finds a match, it doesn't continue searching your log for more matches, so if you have two contacts with the same station on the same band at the same time (such as working county line stations in a state QSO party), only one of the QSOs will be automatically marked. When that occurs, just edit the unmarked contact and mark it manually.
So, for your added records, something in the criteria is not matched. My guess would be the data format.
The records without the additional detail are the ones you just downloaded from LoTW. LoTW does not maintain all the QSO record detail on their database.
I hope that this helps.
Enjoy!
73, Scott
N3FJP
Serving the Amateur Radio community with contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...
-----Original Message-----
From: Dale Martin <kg5u@...> To: N3FJPSoftwareUsers@groups.io Sent: Tue, Apr 28, 2020 10:42 am Subject: [N3FJPSoftwareUsers] Partial Duplicate QSOs... In September of last year, I purchased the ACL Log. I immediately loaded it with most of my N1MM ADIFs and ADIFs from textfiles from a logger program I wrote in VB5 years ago. That amounted to 29k+ QSOs in the ACL—I have not and probably won’t load the 55k+ CWops CWT contest log entries). Last night, I believe I have finally finished editing the ACL log to my satisfaction, removing duplicates, ‘cleaning up’ line items (inserting default RSTs, Frequencies, and such), writing vba macros to do the clean-ups, and finally getting the log looking ‘nice’.
This morning I went through the log and confirmed it does, indeed, to my way of believing how a log should look, look ‘nice’. At least, now when I look at the log, I no longer have a great compulsion to spend time ‘fixing’ the visible entries; meaning more on-the-air time.
Then, I went and downloaded the latest (since March) LOTW confirmations.
Fortunately, there were only about 40 or 50 of them. I picked one and entered it in the ACL Logsheet Call entry field to see what other QSOs I may have had with that station. What came up were two entries, one a partial duplicate of the other. I looked at my Excel version of the ACL log contents and the QSO was there with the QSL-S & R fields both a ‘N’.
In the ACL Log, that QSO entry is now blue and the QSL-S & R fields are both a ‘Y’. I’m okay with that. However, the second entry in the ACL log for the same QSO, is blue with both QSL-S & R fields both a ‘Y’. But, it is showing empty Frequency, RST-S and -R’s, Off times, and Grid squares, telling me it was the confirmation just downloaded from LOTW. Why is the LOTW download function ADDING and entry and not just updating it?
Also, another call in my ‘new’ log with the QSL-S/R tags showing ‘Y’s and the LOTW QSL S/R tags are showing ‘Y’ also received a duplicate confirmation also. Why is that?
Is this duplication thing normal? Do I now have to go through my log every time I download an updated LOTW confirmation and manually remove the partial duplicate QSOs?
Is that listing of LOTW downloads that appears on the ACL LOTW page kept anywhere to access and view outside of ACL?
Did I do something wrong that I’m seeing and having to edit out these duplicates?
73,
Dale, kg5u
|
|
|
|
Partial Duplicate QSOs...
In September of last year, I purchased the ACL Log. I immediately loaded it with most of my N1MM ADIFs and ADIFs from textfiles from a logger program I wrote in VB5 years ago. That amounted to 29k+ QSOs in the ACL—I have not and probably won’t load the 55k+ CWops CWT contest log entries). Last night, I believe I have finally finished editing the ACL log to my satisfaction, removing duplicates, ‘cleaning up’ line items (inserting default RSTs, Frequencies, and such), writing vba macros to do the clean-ups, and finally getting the log looking ‘nice’.
This morning I went through the log and confirmed it does, indeed, to my way of believing how a log should look, look ‘nice’. At least, now when I look at the log, I no longer have a great compulsion to spend time ‘fixing’ the visible entries; meaning more on-the-air time.
Then, I went and downloaded the latest (since March) LOTW confirmations.
Fortunately, there were only about 40 or 50 of them. I picked one and entered it in the ACL Logsheet Call entry field to see what other QSOs I may have had with that station. What came up were two entries, one a partial duplicate of the other. I looked at my Excel version of the ACL log contents and the QSO was there with the QSL-S & R fields both a ‘N’.
In the ACL Log, that QSO entry is now blue and the QSL-S & R fields are both a ‘Y’. I’m okay with that. However, the second entry in the ACL log for the same QSO, is blue with both QSL-S & R fields both a ‘Y’. But, it is showing empty Frequency, RST-S and -R’s, Off times, and Grid squares, telling me it was the confirmation just downloaded from LOTW. Why is the LOTW download function ADDING and entry and not just updating it?
Also, another call in my ‘new’ log with the QSL-S/R tags showing ‘Y’s and the LOTW QSL S/R tags are showing ‘Y’ also received a duplicate confirmation also. Why is that?
Is this duplication thing normal? Do I now have to go through my log every time I download an updated LOTW confirmation and manually remove the partial duplicate QSOs?
Is that listing of LOTW downloads that appears on the ACL LOTW page kept anywhere to access and view outside of ACL?
Did I do something wrong that I’m seeing and having to edit out these duplicates?
73, Dale, kg5u
|
|
|
|
Re: LOTW UPload
Tom & Barb Valosin
Fred and others: If it is any help: Many of the programs that list the grid square are based on the grid square of the Post Office, not the actual grid square of the station. I had to correct mine on the Buckmaster program a coupe of years ago and since then it comes up correctly. Tom, WB2KLD
On 4/27/2020 2:30 PM,
fred.libby@... wrote:
New Info.My problem was an incorrect grid square info related to my station location in TQSL. My grid square is CM98iq. The incorrect data was CM98hq. I don't know how long the wrong data was there, however the latest TSQL Version 2.5.2 included the ability to detect incorrect location data. As soon as I corrected the error all my uploads are accepted.. The suppressed files are are now in my log.
|
|
|
