Date   

Looking a way to update some empty logbook fields

Jeff | VA2SS <jeff@...>
 

Hi all,

When I import from time to time contest logs or any other log, like log when I was portable, into my main log in N3FJP..... a lot of information is missing. Example, when portable, fields like QTH, State, or any other fields that usually are populated using an Internet connexion and a callbook query, are not there.

I would like from time to time, to process my whole or a part of my logbook thru a process that will update missing fields that are not mandatory of course.

Another example: I did the last WES contest last week. And I use N3FJP fists contest software to log my contacts..... then when I exported my log to my main logbook..... I really woule like to fill all empty fileds that would be relevant to have..... like any other QSO's I already have in the rest of my logbook.

When I was on Apple in the last several years.... I was using RUMlogNG. And There was a feature to allow the user to update some empty fields of existing logbook QSOs using a external callbook like QRZ.com

I'm looking to do the same with N3FJP.

At least, I there was a feature to import ADIF and «update» any EXISTING QSOs with imported data instead of merging all of them and create another new record, it would be a good start.

Thanks and 73.

Jeff | VA2SS


Re: Raspberry Pi support for N3FLP

Jeff Steinkamp
 

Maybe.  If you can get WINE setup to run on the PI, then you might be able to get N3FJP software to run.

sethzarny via groups.io wrote on 4/13/2020 19:04:

I am transferring my shack computer from a PC to a Raspberry Pi.  Is it possible to run my N3FJP logging software in the new Raspberry Pi 4?  If so, please point me to the best site to retrieve the system.  Thank you.

N3PZ
Seth

--
Jeff K. Steinkamp (N7YG)
Tucson, AZ
Scud Missile Coordinates
N32.2319 W110.8477


Re: Raspberry Pi support for N3FLP

Jeff | VA2SS <jeff@...>
 

Hi Seth,

Microsoft have indeed a light version of Windows capable of running on a RPi. BUT, this version can run only software compiled to run on this specific CPU. This version unfortunately cannot run X86 platform software like all of current software like N3FJP.

This version is essentially for developpers that are able to test their software.

Sorry, no luck.... :-(

Regards and 73.

Jeff | VA2SS


Re: Feature Request: Add find to single click of callsign, prepopulated.

Scott Davis
 

Hi Dave,

Thanks for your e-mail and suggestion.  I'm not going to have two Find buttons on the same form, but I'll take a look at prepopulating the default value with the selected call when you click the existing Find button.

Thanks for the suggestion!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Dave Cole <dave@...>
To: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io>
Sent: Tue, Apr 14, 2020 7:50 am
Subject: [N3FJPSoftwareUsers] Feature Request: Add find to single click of callsign, prepopulated.

Hi,

When one single clicks a callsign the, "PRINT QSL STRIP, EDIT, PRINT
ADDRESS, DELETE, ETC.", blue boxes pop up.  A person then performs one
of those functions on the callsign that was selected.

It would be very handy to have one additional box, labeled "FIND",
added.  When one left clicks that new blue box, a normal find command
could be executed, prepopulated for the callsign one clicked to bring up
all of the boxes in the first place.

I find for a number of reasons, that I look up a lot of calls I have
worked already.

Thanks for your consideration.

--
73, and thanks,
Dave (NK7Z)
ARRL Volunteer Examiner
ARRL Technical Specialist
ARRL Asst. Director, NW Division, Technical Resources




Re: Raspberry Pi support for N3FJP

Scott Davis
 

Hi Seth,

Thanks for your e-mail.  My software requires Windows to run.  I've not followed Pis closely.  I know they are becoming increasingly powerful, but I don't know if they are capable of supporting a Windows OS just yet.

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: sethzarny via groups.io <seth.zarny@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Mon, Apr 13, 2020 10:04 pm
Subject: [N3FJPSoftwareUsers] Raspberry Pi support for N3FLP

I am transferring my shack computer from a PC to a Raspberry Pi.  Is it possible to run my N3FJP logging software in the new Raspberry Pi 4?  If so, please point me to the best site to retrieve the system.  Thank you.

N3PZ
Seth


Re: 7QP

Scott Davis
 

Hi Mel,

I had every intention of adding support for the DE QSO party this year.  It was on my list, but with all the other projects and non stop e-mail support questions, it's not looking at all likely.

I'm sorry that I didn't have the answer you were hoping for.

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Mel Marcus <melm@...>
To: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io>
Sent: Tue, Apr 14, 2020 3:43 am
Subject: Re: [N3FJPSoftwareUsers] 7QP

Dean

Thanks, I found it. I swear it was not there a second ago. Now step two in the test how about the Delaware qso party?

another 5 points if you get it right.

Mel
NE9A
-------- Original Message --------
Subject: Re: [N3FJPSoftwareUsers] 7QP
From: "Dean Holste" <kc9eoq@...>
Date: Mon, April 13, 2020 10:48 pm
To: N3FJPSoftwareUsers@groups.io

You will find the 7QP QSO party software under the State Contest software page. Its the very first one on the page. You should have looked there first. 

No charge for the information.

On Mon, Apr 13, 2020 at 9:49 PM Mel Marcus <melm@...> wrote:
What log should I use for seventh area qso party on may 2?

Thanks
Mel
NE9A


Feature Request: Add find to single click of callsign, prepopulated.

Dave Cole
 

Hi,

When one single clicks a callsign the, "PRINT QSL STRIP, EDIT, PRINT ADDRESS, DELETE, ETC.", blue boxes pop up. A person then performs one of those functions on the callsign that was selected.

It would be very handy to have one additional box, labeled "FIND", added. When one left clicks that new blue box, a normal find command could be executed, prepopulated for the callsign one clicked to bring up all of the boxes in the first place.

I find for a number of reasons, that I look up a lot of calls I have worked already.

Thanks for your consideration.

--
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist
ARRL Asst. Director, NW Division, Technical Resources


Raspberry Pi support for N3FLP

sethzarny
 

I am transferring my shack computer from a PC to a Raspberry Pi.  Is it possible to run my N3FJP logging software in the new Raspberry Pi 4?  If so, please point me to the best site to retrieve the system.  Thank you.

N3PZ
Seth


Re: 7QP

Mel Marcus
 

Dean

Thanks, I found it. I swear it was not there a second ago. Now step two in the test how about the Delaware qso party?

another 5 points if you get it right.

Mel
NE9A

-------- Original Message --------
Subject: Re: [N3FJPSoftwareUsers] 7QP
From: "Dean Holste" <kc9eoq@...>
Date: Mon, April 13, 2020 10:48 pm
To: N3FJPSoftwareUsers@groups.io

You will find the 7QP QSO party software under the State Contest software page. Its the very first one on the page. You should have looked there first. 

No charge for the information.

On Mon, Apr 13, 2020 at 9:49 PM Mel Marcus <melm@...> wrote:
What log should I use for seventh area qso party on may 2?

Thanks
Mel
NE9A


Re: 7QP

Dean Holste
 

You will find the 7QP QSO party software under the State Contest software page. Its the very first one on the page. You should have looked there first. 

No charge for the information.

On Mon, Apr 13, 2020 at 9:49 PM Mel Marcus <melm@...> wrote:
What log should I use for seventh area qso party on may 2?

Thanks
Mel
NE9A


7QP

Mel Marcus
 

What log should I use for seventh area qso party on may 2?

Thanks
Mel
NE9A


Re: Change TAB order, fields displayed, etc... issue

Mike Olbrisch
 

Dunno.  Just semantics, but I’ve seen Spanish on the border here, and I’ve seen French while in Europe.  While I am not a linguist, and I certainly didn’t sleep in a Holiday Inn last night, strangely, that looks like French to me.  Second clue, a VA2 call sign would normally be out of Quebec.  And IIRC, the language of Quebec is ???

 

But it is late, I am tired, I spent all day working on the JEEP.  So I could be 1,000% wrong on all of that.

 

Y-all have a SUPER Monday night.  Be safe, stay well.

 

Mike – KD5KC -- El Paso -- Texas.

 

The canyons are calling, colorful and deep.  But I have promises to keep.

And miles to go still in my Jeep...   And miles to go still in my Jeep...

 

 

ADVENTURE:  The respectful pursuit of trouble.

 

 

 

 

From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of Frank MacKenzie-Lamb
Sent: Monday, April 13, 2020 17:27 PM
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] Change TAB order, fields displayed, etc... issue

 

This is true

 

From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of Pat Whelton
Sent: Monday, April 13, 2020 7:15 PM
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] Change TAB order, fields displayed, etc... issue

 

Interesting.  I didn’t know you had a Spanish version of ACLog.  Might as well.  Everything else is in Spanish now-a-days.

 

Pat – KZ5J

 

From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of Scott Davis via groups.io
Sent: Monday, April 13, 2020 3:39 PM
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] Change TAB order, fields displayed, etc... issue

 

Interesting, that's a new one Jeff.  Thanks for the report!

 

Enjoy!

73, Scott

N3FJP

 

Serving the Amateur Radio community with contesting and general logging software since 1997.

 

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...

 

-----Original Message-----
From: Jeff | VA2SS <jeff@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Mon, Apr 13, 2020 4:20 pm
Subject: Re: [N3FJPSoftwareUsers] Change TAB order, fields displayed, etc... issue

I found the culprit...... If the ACL Windows application shortcut is set to start ACL in a maximized window..... this behavior appear. If it is set to normal window in Windows shortcut, everything is just fine.

I learned something. :-)

73

Jeff | VA2SS 


Re: Change TAB order, fields displayed, etc... issue

Scott Davis
 

Hi Guys,

Please remember that every time you send an e-mail through our users group, you are e-mailing thousands of individuals.  Additionally, you are causing me to divert from what I'm doing to see if there is a support question I have to answer.  Even short e-mails divert my focus.

Again I have to ask you to please be mindful of replying to the group for off topic posts.  Before you click send, please make sure that you are either asking a question specific to N3FJP Software, or you a providing a helpful response to a question.  If the answer to both of these criteria is no, please don't respond through the group.

Thanks for your cooperation.

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Frank MacKenzie-Lamb <maclamb@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Mon, Apr 13, 2020 7:27 pm
Subject: Re: [N3FJPSoftwareUsers] Change TAB order, fields displayed, etc... issue

This is true
 
From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of Pat Whelton
Sent: Monday, April 13, 2020 7:15 PM
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] Change TAB order, fields displayed, etc... issue
 
Interesting.  I didn’t know you had a Spanish version of ACLog.  Might as well.  Everything else is in Spanish now-a-days.
 
Pat – KZ5J
 
From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of Scott Davis via groups.io
Sent: Monday, April 13, 2020 3:39 PM
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] Change TAB order, fields displayed, etc... issue
 
Interesting, that's a new one Jeff.  Thanks for the report!
 
Enjoy!
73, Scott
N3FJP
 
Serving the Amateur Radio community with contesting and general logging software since 1997.
 
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...
 
-----Original Message-----
From: Jeff | VA2SS <jeff@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Mon, Apr 13, 2020 4:20 pm
Subject: Re: [N3FJPSoftwareUsers] Change TAB order, fields displayed, etc... issue
I found the culprit...... If the ACL Windows application shortcut is set to start ACL in a maximized window..... this behavior appear. If it is set to normal window in Windows shortcut, everything is just fine.

I learned something. :-)

73

Jeff | VA2SS 


Re: Change TAB order, fields displayed, etc... issue

Frank MacKenzie-Lamb
 

This is true

 

From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of Pat Whelton
Sent: Monday, April 13, 2020 7:15 PM
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] Change TAB order, fields displayed, etc... issue

 

Interesting.  I didn’t know you had a Spanish version of ACLog.  Might as well.  Everything else is in Spanish now-a-days.

 

Pat – KZ5J

 

From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of Scott Davis via groups.io
Sent: Monday, April 13, 2020 3:39 PM
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] Change TAB order, fields displayed, etc... issue

 

Interesting, that's a new one Jeff.  Thanks for the report!

 

Enjoy!

73, Scott

N3FJP

 

Serving the Amateur Radio community with contesting and general logging software since 1997.

 

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...

 

-----Original Message-----
From: Jeff | VA2SS <jeff@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Mon, Apr 13, 2020 4:20 pm
Subject: Re: [N3FJPSoftwareUsers] Change TAB order, fields displayed, etc... issue

I found the culprit...... If the ACL Windows application shortcut is set to start ACL in a maximized window..... this behavior appear. If it is set to normal window in Windows shortcut, everything is just fine.

I learned something. :-)

73

Jeff | VA2SS 


Re: Change TAB order, fields displayed, etc... issue

Pat Whelton
 

Interesting.  I didn’t know you had a Spanish version of ACLog.  Might as well.  Everything else is in Spanish now-a-days.

 

Pat – KZ5J

 

From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of Scott Davis via groups.io
Sent: Monday, April 13, 2020 3:39 PM
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] Change TAB order, fields displayed, etc... issue

 

Interesting, that's a new one Jeff.  Thanks for the report!

 

Enjoy!

73, Scott

N3FJP

 

Serving the Amateur Radio community with contesting and general logging software since 1997.

 

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...

 

-----Original Message-----
From: Jeff | VA2SS <jeff@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Mon, Apr 13, 2020 4:20 pm
Subject: Re: [N3FJPSoftwareUsers] Change TAB order, fields displayed, etc... issue

I found the culprit...... If the ACL Windows application shortcut is set to start ACL in a maximized window..... this behavior appear. If it is set to normal window in Windows shortcut, everything is just fine.

I learned something. :-)

73

Jeff | VA2SS 


Re: Change TAB order, fields displayed, etc... issue

Scott Davis
 

Interesting, that's a new one Jeff.  Thanks for the report!

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Jeff | VA2SS <jeff@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Mon, Apr 13, 2020 4:20 pm
Subject: Re: [N3FJPSoftwareUsers] Change TAB order, fields displayed, etc... issue

I found the culprit...... If the ACL Windows application shortcut is set to start ACL in a maximized window..... this behavior appear. If it is set to normal window in Windows shortcut, everything is just fine.

I learned something. :-)

73

Jeff | VA2SS 


Re: Change TAB order, fields displayed, etc... issue

Scott Davis
 

Hi Jeff,

Thanks for your e-mail.  After you restart the program, don't change the form (don't maximize it or move it, etc.).  Just go directly to the edit functions.

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Jeff | VA2SS <jeff@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Mon, Apr 13, 2020 3:40 pm
Subject: [N3FJPSoftwareUsers] Change TAB order, fields displayed, etc... issue

Hi,

I know I have done it in the past, but everytime I tried to select the settings «EDIT FIELDS DISPLAYED,....», ACL is telling me that the display must be set at 100% etc, etc....

Everytime I click YES then it restarts ACL. But again, when trying to edit.... the same message asking me to answer YES is displayed again and again.

How can I avoid this ???

Thanks.

Jeff | VA2SS


Re: Change TAB order, fields displayed, etc... issue

Larry Banks
 

Hi Jeff,
 
You need to change the display to 100% – from what you say below you are not doing that.
 
SETTINGS >> APPEARANCE >> FORM SIZE

73 -- Larry -- W1DYJ

 
 

Sent: Monday, April 13, 2020 15:40
Subject: [N3FJPSoftwareUsers] Change TAB order, fields displayed, etc... issue
 
Hi,

I know I have done it in the past, but everytime I tried to select the settings «EDIT FIELDS DISPLAYED,....», ACL is telling me that the display must be set at 100% etc, etc....

Everytime I click YES then it restarts ACL. But again, when trying to edit.... the same message asking me to answer YES is displayed again and again.

How can I avoid this ???

Thanks.

Jeff | VA2SS


Re: New TQSL-ACLog Conflict

Scott Davis
 

Hi All,

I understand ARRL is working on TQSL 2.5.3, which will ignore a value in the Operator field if it doesn't look like a call sign.  If you have your name in the operator field, that should return normal functionality to your uploads.

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Larry Krist <roanin2009@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Mon, Apr 13, 2020 3:36 pm
Subject: Re: [N3FJPSoftwareUsers] New TQSL-ACLog Conflict

What did Howard say, I cannot find it on the user group postings, I would be interested as I emailed LOTW and got no help whatsoever on how to fix the problem.
Larry  N8CWU
On 4/13/2020 3:01 PM, philp51 wrote:
Tnx Howard, That fixed it for me, 73...Phil W8PP


Re: Change TAB order, fields displayed, etc... issue

Jeff | VA2SS <jeff@...>
 

I found the culprit...... If the ACL Windows application shortcut is set to start ACL in a maximized window..... this behavior appear. If it is set to normal window in Windows shortcut, everything is just fine.

I learned something. :-)

73

Jeff | VA2SS 

7221 - 7240 of 48370