Date   

Double voice alert

K4GM-George
 

Recently, I started to hear duplicate audio alerts on DX spots.  One is about 1/2 second behind the other.   I've run through the menus but can't seem to find what I must have checked or unchecked by accident.   I want to hear new/unconfirmed countries on the band. All suggestions appreciated.

73, George K4GM


Re: Logging the minor contests with existing programs

n3nz Noel
 

The WriteLog software accepts the LETTER in place of numerals in the EA RTTY contest

73, Noel (OM) N3NZ


Re: Setup "Call" vs. "Operator" fields? #contest

Scott Davis
 

Hi Jeff,

Thanks for your e-mail.  Your TQSL cert is tied to the call sign you should be using on the air.

I will give thought to emitting both the call sign entered in setup, as well as operator call sign on ADIF export in a future release.

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Jeff Logullo N0̸MII <jeff@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Sat, Apr 4, 2020 11:01 pm
Subject: [N3FJPSoftwareUsers] Setup "Call" vs. "Operator" fields? #contest

I've always entered my call sign in both the "Call" and the optional "Operator" fields when setting up any N3FJP program.

This weekend I'm operating the MO QSO party with a special 1x1 call... and so when setting up, I entered that 1x1 call in the Setup dialog's "Call" field, and my personal callsign in the "Operator" field.

I just did an ADIF export of the data so far, and discovered that the 1x1 call in the "Call" setup field does not exist in any record of the data. I'm baffled. What's the purpose of the "Call" field?

Don't I want these exported records to have the callsign I was using on the air in the contest?

Also: I understand that with LoTW I'll need to request a new callsign certificate for this special event 1x1 call sign, which I'll use to sign these QSOs as I upload them... but what's the correct/expected call sign that should appear in my QSO records?

--
Jeff N0̷MII


Re: Setup "Call" vs. "Operator" fields? #contest

Mel Marcus
 

When you create the calibrio file you will notice it has the callsign and the operators.

-------- Original Message --------
Subject: [N3FJPSoftwareUsers] Setup "Call" vs. "Operator" fields?
#contest
From: Jeff Logullo N0̸MII <jeff@...>
Date: Sat, April 04, 2020 10:01 pm
To: N3FJPSoftwareUsers@groups.io

I've always entered my call sign in both the "Call" and the optional "Operator" fields when setting up any N3FJP program.

This weekend I'm operating the MO QSO party with a special 1x1 call... and so when setting up, I entered that 1x1 call in the Setup dialog's "Call" field, and my personal callsign in the "Operator" field.

I just did an ADIF export of the data so far, and discovered that the 1x1 call in the "Call" setup field does not exist in any record of the data. I'm baffled. What's the purpose of the "Call" field?

Don't I want these exported records to have the callsign I was using on the air in the contest?

Also: I understand that with LoTW I'll need to request a new callsign certificate for this special event 1x1 call sign, which I'll use to sign these QSOs as I upload them... but what's the correct/expected call sign that should appear in my QSO records?

--
Jeff N0̷MII


Setup "Call" vs. "Operator" fields? #contest

Jeff Logullo N0̸MII
 

I've always entered my call sign in both the "Call" and the optional "Operator" fields when setting up any N3FJP program.

This weekend I'm operating the MO QSO party with a special 1x1 call... and so when setting up, I entered that 1x1 call in the Setup dialog's "Call" field, and my personal callsign in the "Operator" field.

I just did an ADIF export of the data so far, and discovered that the 1x1 call in the "Call" setup field does not exist in any record of the data. I'm baffled. What's the purpose of the "Call" field?

Don't I want these exported records to have the callsign I was using on the air in the contest?

Also: I understand that with LoTW I'll need to request a new callsign certificate for this special event 1x1 call sign, which I'll use to sign these QSOs as I upload them... but what's the correct/expected call sign that should appear in my QSO records?

--
Jeff N0̷MII


Re: Logging the minor contests with existing programs

Jim Shorney
 

Check out Genlog32. It is a lightweight logger that supports a boatload of contests. You can export an ADIF for ACL to gobble up when you are done.

It was my contest logger of choice for many years before I bought the N3FJP suite. I still use it occasionally for odd purposes.

73

-Jim
NU0C

On Sat, 04 Apr 2020 16:12:53 -0700
"Bo W4GHV" <@BoBarry> wrote:

Tried the EA RTTY with a variety of the programs and found none that will allow a serial number to be a LETTER. (The Spain contests provide them not letters).
Resorted to paper logging and the excitement goes away.
Learning N1MM has been too much of a chore for this old man.
--
73, Bo W4GHV since '54



Re: DING!

Christopher Scibelli
 

If you add the county prefix that will change the country.  The county abbreviation ios appended to the call to let contestant know where the rover is. It stops dupes.  In some State QSO Partys you may work the same rover a couple dozen times as he drives through the state.

73,

Chris  NU1O

 


-----Original Message-----
From: Scott Davis via groups.io <SNKDavis@...>
To: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io>
Sent: Sat, Apr 4, 2020 11:40 am
Subject: Re: [N3FJPSoftwareUsers] DING!

Hi Dale,

Thanks for your e-mail.  My software checks for valid callsigns on entry and alerts you when you attempt to enter a call that does not have a number in the second or third position.

In the case of state QSO parties, mobile /  rover stations will often append the county they are now in, to let you know if they are in a new county, so that you can work them again.  This is not part of their call sign and you should not be entering the country abbreviation in the Call field, just the call sign.

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Dale Martin <kg5u@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Sat, Apr 4, 2020 9:57 am
Subject: [N3FJPSoftwareUsers] DING!

 
Every time I enter a callsign in the logsheet entry field which has no number in the portable prefix, I get a big ding. I get another big ding when I click DONE to log the entry. Apparently, ACL has a problem with no number in the portable prefix. It is what the station sent me—and everyone else he worked, and which LOTW recognizes as a valid portable prefix. Can this be fixed? Either by me or the ACL powers-that-be.
 
73,
Dale, kg5u
 


Re: DING!

Scott Davis
 

Hi Dale,

Thanks for your e-mail.  My software checks for valid callsigns on entry and alerts you when you attempt to enter a call that does not have a number in the second or third position.

In the case of state QSO parties, mobile /  rover stations will often append the county they are now in, to let you know if they are in a new county, so that you can work them again.  This is not part of their call sign and you should not be entering the country abbreviation in the Call field, just the call sign.

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Dale Martin <kg5u@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Sat, Apr 4, 2020 9:57 am
Subject: [N3FJPSoftwareUsers] DING!

 
Every time I enter a callsign in the logsheet entry field which has no number in the portable prefix, I get a big ding. I get another big ding when I click DONE to log the entry. Apparently, ACL has a problem with no number in the portable prefix. It is what the station sent me—and everyone else he worked, and which LOTW recognizes as a valid portable prefix. Can this be fixed? Either by me or the ACL powers-that-be.
 
73,
Dale, kg5u
 


Re: DING!

David Rounds
 

Dale,
Which version of the logger are you using? ACL or a contest/special event version?
In the ACL version of the logger, I do not see a "Portable Prefix" field.
I also checked two of the state QP loggers and neither of them have a "Portable Prefix" field.

73
David
AK9F


On 4/4/2020 8:57 AM, Dale Martin wrote:

 

Every time I enter a callsign in the logsheet entry field which has no number in the portable prefix, I get a big ding. I get another big ding when I click DONE to log the entry. Apparently, ACL has a problem with no number in the portable prefix. It is what the station sent me—and everyone else he worked, and which LOTW recognizes as a valid portable prefix. Can this be fixed? Either by me or the ACL powers-that-be.

 

73,

Dale, kg5u

 



Re: DING!

Christopher Scibelli
 

The powers that be is singular.  Scott, N3FJP is the power.

73,

Chris  NU1O


-----Original Message-----
From: Dale Martin <kg5u@...>
To: N3FJPSoftwareUsers <N3FJPSoftwareUsers@groups.io>
Sent: Sat, Apr 4, 2020 9:57 am
Subject: [N3FJPSoftwareUsers] DING!

 

Every time I enter a callsign in the logsheet entry field which has no number in the portable prefix, I get a big ding. I get another big ding when I click DONE to log the entry. Apparently, ACL has a problem with no number in the portable prefix. It is what the station sent me—and everyone else he worked, and which LOTW recognizes as a valid portable prefix. Can this be fixed? Either by me or the ACL powers-that-be.

 

73,

Dale, kg5u

 


Re: Addresses

Christopher Scibelli
 

Stop getting hung up on words.  Comments can be anything you want.  If you have AC Log setup to do QRZ lookups an address will appear in the comment field, but during a QSO you can add info like the station gear the other person is using.  You can put anything you want in comment field.  I use it to record station equipment.

73,

Chris  NU1O



-----Original Message-----
From: David Rounds <groups@...>
To: N3FJPSoftwareUsers <N3FJPSoftwareUsers@groups.io>
Sent: Fri, Apr 3, 2020 10:05 pm
Subject: Re: [N3FJPSoftwareUsers] Addresses

Harry,  See Scott's message from 1:59 pm today.
There is NO address field in any N3FLP ACL record. 
The comments field is just that...insert any comment you want including address if you want to see it later.

73
David
AK9F


On 4/3/2020 6:29 PM, Harry White wrote:

Thank you David,

 

I did spend several hours looking at the FAQ’s and watching videos. Still no luck, in fact, I may be a bit more confused. Apparently the address info goes in the “Comments” column. Nowhere can I find how “comments” came to define address. In some of my imported files I have actual comments in the comment file. Could these be preventing the column from importing addresses? Should I delete all of them, and lose a little history?

 

Under “Edit” there is no selection for address. There is a “QTH group” that can be selected but I have no idea of what that means.

 

I would be happy to click on each callsign if that would make the program attach the desired information. Right now, it won’t.

 

BTW, I did manually add a contact this morning, W1AW. It worked and came up with a mailing address in the “Comments” column.

 

I really need this to work, I have a lot of QSL’s that I want to mail and I need names and addresses.

 

73,

 

Harry K1RSA

 

From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of David Rounds
Sent: Friday, April 3, 2020 2:24 PM
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] Addresses

 

Regarding documentation for N3FJP ACL, select the Help menu then select "View OnLine Help".  If more detailed help is needed, click the [Yes] button.

73
David
AK9F

On 4/3/2020 11:54 AM, Harry White wrote:

Hi All,

 

Complete newbie here. I’ve imported all my contacts into ACLog. Few have addresses. What do I need to do to have the program add the addresses? Then I’ll need to print the labels. How is that done? I’ve searched the YouTube videos but found nothing. I cannot find a manual for the program. Can anyone help?

73,

Harry K1RSA

 

Virus-free. www.avast.com

 



DING!

Dale Martin, KG5U
 

 

Every time I enter a callsign in the logsheet entry field which has no number in the portable prefix, I get a big ding. I get another big ding when I click DONE to log the entry. Apparently, ACL has a problem with no number in the portable prefix. It is what the station sent me—and everyone else he worked, and which LOTW recognizes as a valid portable prefix. Can this be fixed? Either by me or the ACL powers-that-be.

 

73,

Dale, kg5u

 


Re: DX Spotting

Bobby Chandler
 

Mal,
If the modes are not showing correctly in the spotting panel, you can change your frequencies in the 'bandplan.txt' file for each mode. This is where your data comes from. Go to:
users/name/documents/affirmtech/n3fjp/shared
and look at 'bandplan.txt.

Bobby/N4AU

--
Bobby Chandler
bobbye@...
n4au@...


Re: Addresses

David Rounds
 

Harry,  See Scott's message from 1:59 pm today.
There is NO address field in any N3FLP ACL record. 
The comments field is just that...insert any comment you want including address if you want to see it later.

73
David
AK9F


On 4/3/2020 6:29 PM, Harry White wrote:

Thank you David,

 

I did spend several hours looking at the FAQ’s and watching videos. Still no luck, in fact, I may be a bit more confused. Apparently the address info goes in the “Comments” column. Nowhere can I find how “comments” came to define address. In some of my imported files I have actual comments in the comment file. Could these be preventing the column from importing addresses? Should I delete all of them, and lose a little history?

 

Under “Edit” there is no selection for address. There is a “QTH group” that can be selected but I have no idea of what that means.

 

I would be happy to click on each callsign if that would make the program attach the desired information. Right now, it won’t.

 

BTW, I did manually add a contact this morning, W1AW. It worked and came up with a mailing address in the “Comments” column.

 

I really need this to work, I have a lot of QSL’s that I want to mail and I need names and addresses.

 

73,

 

Harry K1RSA

 

From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of David Rounds
Sent: Friday, April 3, 2020 2:24 PM
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] Addresses

 

Regarding documentation for N3FJP ACL, select the Help menu then select "View OnLine Help".  If more detailed help is needed, click the [Yes] button.

73
David
AK9F

On 4/3/2020 11:54 AM, Harry White wrote:

Hi All,

 

Complete newbie here. I’ve imported all my contacts into ACLog. Few have addresses. What do I need to do to have the program add the addresses? Then I’ll need to print the labels. How is that done? I’ve searched the YouTube videos but found nothing. I cannot find a manual for the program. Can anyone help?

73,

Harry K1RSA

 

Virus-free. www.avast.com

 



Re: Addresses

Scott Davis
 

Hi Harry,

Thanks for your follow up.  You can disable the option to place the address in the Comments field from the Callbook menu tree.  The address is not retrieved from the Comments field when you print your addresses.

Please see my previous reply, which answers the rest:

https://groups.io/g/N3FJPSoftwareUsers/message/40954

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Harry White <hwhite1@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Fri, Apr 3, 2020 7:29 pm
Subject: Re: [N3FJPSoftwareUsers] Addresses

Thank you David,
 
I did spend several hours looking at the FAQ’s and watching videos. Still no luck, in fact, I may be a bit more confused. Apparently the address info goes in the “Comments” column. Nowhere can I find how “comments” came to define address. In some of my imported files I have actual comments in the comment file. Could these be preventing the column from importing addresses? Should I delete all of them, and lose a little history?
 
Under “Edit” there is no selection for address. There is a “QTH group” that can be selected but I have no idea of what that means.
 
I would be happy to click on each callsign if that would make the program attach the desired information. Right now, it won’t.
 
BTW, I did manually add a contact this morning, W1AW. It worked and came up with a mailing address in the “Comments” column.
 
I really need this to work, I have a lot of QSL’s that I want to mail and I need names and addresses.
 
73,
 
Harry K1RSA
 
From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of David Rounds
Sent: Friday, April 3, 2020 2:24 PM
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] Addresses
 
Regarding documentation for N3FJP ACL, select the Help menu then select "View OnLine Help".  If more detailed help is needed, click the [Yes] button.

73
David
AK9F
On 4/3/2020 11:54 AM, Harry White wrote:
Hi All,
 
Complete newbie here. I’ve imported all my contacts into ACLog. Few have addresses. What do I need to do to have the program add the addresses? Then I’ll need to print the labels. How is that done? I’ve searched the YouTube videos but found nothing. I cannot find a manual for the program. Can anyone help?
73,
Harry K1RSA
 
Virus-free. www.avast.com
 


Re: Addresses

Jim Shorney
 

If all else fails you can print labels directly from qrz.com.

73
-Jim
NU0C

On Fri, 3 Apr 2020 19:29:44 -0400
"Harry White" <hwhite1@...> wrote:

Thank you David,



I did spend several hours looking at the FAQ's and watching videos. Still no
luck, in fact, I may be a bit more confused. Apparently the address info
goes in the "Comments" column. Nowhere can I find how "comments" came to
define address. In some of my imported files I have actual comments in the
comment file. Could these be preventing the column from importing addresses?
Should I delete all of them, and lose a little history?



Under "Edit" there is no selection for address. There is a "QTH group" that
can be selected but I have no idea of what that means.



I would be happy to click on each callsign if that would make the program
attach the desired information. Right now, it won't.



BTW, I did manually add a contact this morning, W1AW. It worked and came up
with a mailing address in the "Comments" column.



I really need this to work, I have a lot of QSL's that I want to mail and I
need names and addresses.



73,



Harry K1RSA



From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf
Of David Rounds
Sent: Friday, April 3, 2020 2:24 PM
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] Addresses



Regarding documentation for N3FJP ACL, select the Help menu then select
"View OnLine Help". If more detailed help is needed, click the [Yes]
button.

73
David
AK9F

On 4/3/2020 11:54 AM, Harry White wrote:

Hi All,



Complete newbie here. I've imported all my contacts into ACLog. Few have
addresses. What do I need to do to have the program add the addresses? Then
I'll need to print the labels. How is that done? I've searched the YouTube
videos but found nothing. I cannot find a manual for the program. Can anyone
help?

73,

Harry K1RSA





<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campai
gn=sig-email&utm_content=emailclient&utm_term=icon>

Virus-free.
<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campai
gn=sig-email&utm_content=emailclient&utm_term=link> www.avast.com







Re: Addresses

Harry White <hwhite1@...>
 

Thank you David,

 

I did spend several hours looking at the FAQ’s and watching videos. Still no luck, in fact, I may be a bit more confused. Apparently the address info goes in the “Comments” column. Nowhere can I find how “comments” came to define address. In some of my imported files I have actual comments in the comment file. Could these be preventing the column from importing addresses? Should I delete all of them, and lose a little history?

 

Under “Edit” there is no selection for address. There is a “QTH group” that can be selected but I have no idea of what that means.

 

I would be happy to click on each callsign if that would make the program attach the desired information. Right now, it won’t.

 

BTW, I did manually add a contact this morning, W1AW. It worked and came up with a mailing address in the “Comments” column.

 

I really need this to work, I have a lot of QSL’s that I want to mail and I need names and addresses.

 

73,

 

Harry K1RSA

 

From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of David Rounds
Sent: Friday, April 3, 2020 2:24 PM
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] Addresses

 

Regarding documentation for N3FJP ACL, select the Help menu then select "View OnLine Help".  If more detailed help is needed, click the [Yes] button.

73
David
AK9F

On 4/3/2020 11:54 AM, Harry White wrote:

Hi All,

 

Complete newbie here. I’ve imported all my contacts into ACLog. Few have addresses. What do I need to do to have the program add the addresses? Then I’ll need to print the labels. How is that done? I’ve searched the YouTube videos but found nothing. I cannot find a manual for the program. Can anyone help?

73,

Harry K1RSA

 

Virus-free. www.avast.com

 


Re: Addresses

Scott Davis
 

Hi Harry,

Thanks for your e-mail.  Click Edit > Fill Fields Determined by Call with a callbook lookup source enabled that returns addresses.

That said, it is not necessary to perform that for address labels, as the lookup is performed at the time you print the lables.

Enjoy!


73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: David Rounds <groups@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Fri, Apr 3, 2020 2:24 pm
Subject: Re: [N3FJPSoftwareUsers] Addresses

Regarding documentation for N3FJP ACL, select the Help menu then select "View OnLine Help".  If more detailed help is needed, click the [Yes] button.

73
David
AK9F

On 4/3/2020 11:54 AM, Harry White wrote:
Hi All,
 
Complete newbie here. I’ve imported all my contacts into ACLog. Few have addresses. What do I need to do to have the program add the addresses? Then I’ll need to print the labels. How is that done? I’ve searched the YouTube videos but found nothing. I cannot find a manual for the program. Can anyone help?
73,
Harry K1RSA

Virus-free. www.avast.com


Re: DX Spotting

Malcolm Pelham
 

Nope that didn't work.  I even tried uninstalling and downloading again, but to no avail.  I know for a fact that it was spotting FT-8 contacts before, but not now.  Oh well, just trying to help my fellow amateur operators catch a few DX spots.  It works on CW and SSB though.

Thanks for all the help.

Mal
WF5K

On Fri, Apr 3, 2020 at 7:08 AM Pat Whelton <pwhelton@...> wrote:

Mal.  I think you want to “remove” the check from “Digital Modes”.  Give that a try.

 

Pat – KZ5J

 

From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of Malcolm Pelham
Sent: Thursday, April 2, 2020 9:32 PM
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] DX Spotting

 

Well I am still unable to spot DX stations on FT8.  I remember when I first upgrade to 6.6 it worked like a charm.  Here’s what I have checked off in “More Filtering:”

Only display DX spotted by stations that are located in: checked NO Filter

 

Digital modes:  Checked

 

Those are the only things checked.

 

Any ideas?

Malcolm Pelham

WF5K



On Apr 2, 2020, at 3:56 PM, Malcolm Pelham via groups.io <malcolm.pelham@...> wrote:

Thanks I will check that out.  I did get it to work with a CW DX spot last night.

 

I was wondering whether or not virus protection software might have some sort of effect on it.  Maybe the Firewall, but I am not as computer literate to figure that out.

 

Thanks for the help.

Malcolm Pelham

WF5K



On Apr 1, 2020, at 7:27 AM, Pat Whelton <pwhelton@...> wrote:



Hi Mel.  Not sure this will help or not but it might be worth checking out.  I grew tired of all the FT4 and FT8 spots that kept hitting DX spots and was hoping there was a way to block them.  Scott made a change sometime within the last year or so to block all the FT4/FT8 and I’ve been a happy camper ever since.  It’s possible that somehow your settings got changed to block these unwanted spots.

 

You can check by going to:

  • Settings
  • DX Spotting
  • Configure
  • More Filtering
  • Under More Filtering place a check mark by “Block Digital”.

 

After making this change it got rid of all the stuff above 14.080 and made the DX spots a whole lot more meaningful for me.  For some reason the FT4/FT8 folks feel they have to spot every contact they make.

 

You may have a totally different problem but it might be worth looking into.

 

Good luck.

 

Pat – KZ5J

 

From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of Malcolm Pelham
Sent: Tuesday, March 31, 2020 9:47 PM
To: N3FJPSoftwareUsers@groups.io
Subject: [N3FJPSoftwareUsers] DX Spotting

 

I have been using N3FJP software for at least 9 years and have never had a problem I could not solve.  But since I have upgraded to 6.6 my DX Spots do not post.  Every once and awhile I will have one post, but recently few and far between.  My FT-8 DX contacts do not post, and were posting prior to version 6.6.  I can't even post when I do it directly from DX Spot.  So I was wonsdering if anyone has seen this problem, and are there any fixes.  Attached please find a screen shot of my DX Spotting setup.

 

Thanks for your help

 

Mal

WF5K


Re: Addresses

David Rounds
 

Regarding documentation for N3FJP ACL, select the Help menu then select "View OnLine Help".  If more detailed help is needed, click the [Yes] button.

73
David
AK9F

On 4/3/2020 11:54 AM, Harry White wrote:

Hi All,

 

Complete newbie here. I’ve imported all my contacts into ACLog. Few have addresses. What do I need to do to have the program add the addresses? Then I’ll need to print the labels. How is that done? I’ve searched the YouTube videos but found nothing. I cannot find a manual for the program. Can anyone help?

73,

Harry K1RSA


Virus-free. www.avast.com