Date   

NAQP RTTY KP4

Anne KC9YL
 

I contacted KP4/K6DTT in the NAQP RTTY contest, but I can't figure out how to log it.  I tried KP and KP4, but no-go.


Re: VP8PJ - South Orkney Is.

Fred K2DFC
 

"I uploaded my 2 VP8PJ contacts to LoTW again, but there’s no way of seeing if they are correct now."

You'll have to wait until VP8PJ uploads so there can be a match.

--
73
Fred
K2DFC


Re: VP8PJ - South Orkney Is.

Mike Olbrisch
 

Of course it is Scott.  LoTW only looks at the certificate and QTH of the station uploading their side of the contact.  Well, Band/Mode/Time (within a 15 min window) too.  And this is why it is so important for the portable operator to know how to add additional locations in LoTW.  Last I checked I was nearing 100 locations and certificates for 6 countries.

 

I’m happy to help anyone work through it, this isn’t rocket science.  Scott has two documents in his LoTW help page that should get it going right.

 

http://www.n3fjp.com/lotwhelp.html

 

Mike – KD5KC -- El Paso -- Texas.

 

The canyons are calling, colorful and deep.  But I have promises to keep.

And miles to go still in my Jeep...   And miles to go still in my Jeep...

 

 

ADVENTURE:  The respectful pursuit of trouble.

 

 

 

 

From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of Scott Davis via Groups.Io
Sent: Sunday, March 1, 2020 4:38 AM
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] VP8PJ - South Orkney Is.

 

Hi Nickus,

 

Thanks for your follow up.  I'm not an LoTW expert, but I'm fairly certain the DX entity confirmation is based on the confirming station's TQSL cert, not the DX entity you logged. 

 

Enjoy!

73, Scott

N3FJP

 

Serving the Amateur Radio community with contesting and general logging software since 1997.

 

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...

 

-----Original Message-----
From: Nickus de Vos <shack@...>
To: N3FJPSoftwareUsers <N3FJPSoftwareUsers@groups.io>
Sent: Sun, Mar 1, 2020 4:52 am
Subject: Re: [N3FJPSoftwareUsers] VP8PJ - South Orkney Is.

I uploaded my 2 VP8PJ contacts to LoTW again, but there’s no way of seeing if they are correct now.

 

If logging in to LoTW and looking at the uploaded QSO’s, it only shows the call VP8PJ, the time, band and freq, but it doesn’t show the country.

On my side it shows my country and ADIF number, but not on the other side.

 

Any ideas?

73

Nickus de Vos - ZS6J (Formerly ZR6JN)

KG44DD

Tell: 082 389 9477



On 28 Feb 2020, at 21:25, Larry Stowell K1ZW <wa2fif@...> wrote:

 

Dale

I don't believe that's the CQ zones, its the ITU zones

73 Larry K1ZW

On 2/28/2020 11:45 AM, K8TS wrote:

I would think the zone matters as LoTW tracks the WAZ program, am I incorrect?

South Orkney is Zone 13 according to my DARC map.

Dale K8TS

 

 

Sent from Mail for Windows 10

 

From: Scott Davis via Groups.Io
Sent: Friday, February 28, 2020 11:27 AM
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] VP8PJ - South Orkney Is.

 

Hi Nickus, 

 

Thanks for your follow up.  I can't speak to the zone where South Orkney Is. resides, but that is not part of the data LoTW processes on upload.

 

Thanks for the good report!

 

Enjoy!

 

73, Scott

N3FJP

 

Serving the Amateur Radio community with contesting and general logging software since 1997.

 

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...

 

-----Original Message-----
From: Nickus de Vos <shack@...>
To: N3FJPSoftwareUsers<N3FJPSoftwareUsers@groups.io>
Sent: Fri, Feb 28, 2020 11:15 am
Subject: Re: [N3FJPSoftwareUsers] VP8PJ - South Orkney Is.

I already worked them on 17 and 20.

Mine showed as Anartica and wondered what was up with that then I saw this message. 

 

I Downloaded the country files and when I selected edit on the contact, I got alerted that VP8PJ is South Orkney, so I just had to select ok and it fixed the country and ADIf ID for me.

 

I did however notice that the CQ zone on my contacts in AC Log is still listed as zone 12, but on the VP8PJ website the CQ zone is listed as zone 13.

 

So which is it, is it zone 12 or zone 13 and does this matter to LoTW? Obviously I want to be sure that I got everything correct before I upload to LoTW again.    

73

Nickus de Vos - ZS6J (Formerly ZR6JN) 

KG44DD

Tell: 082 389 9477

 

On 28 Feb 2020, at 14:39, Scott Davis via Groups.Io <SNKDavis@...> wrote:

 

Hi All,

 

If AC Log is still showing Antarctica for VP8PJ, please click File > Download Country Files from AD1C and then restart the software.  It will then show South Orkney Is.

 

Please make sure any QSOs with VP8PJ are logged as South Orkney Is. in the country field.  Any QSOs already logged as Antarctica will need to be manually edited.

 

Enjoy!

 

 

73, Scott

N3FJP

 

Serving the Amateur Radio community with contesting and general logging software since 1997.

 

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...

 

 

 


Re: VP8PJ - South Orkney Is.

Scott Davis
 

Hi Nickus,

Thanks for your follow up.  I'm not an LoTW expert, but I'm fairly certain the DX entity confirmation is based on the confirming station's TQSL cert, not the DX entity you logged. 

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Nickus de Vos <shack@...>
To: N3FJPSoftwareUsers <N3FJPSoftwareUsers@groups.io>
Sent: Sun, Mar 1, 2020 4:52 am
Subject: Re: [N3FJPSoftwareUsers] VP8PJ - South Orkney Is.

I uploaded my 2 VP8PJ contacts to LoTW again, but there’s no way of seeing if they are correct now.

If logging in to LoTW and looking at the uploaded QSO’s, it only shows the call VP8PJ, the time, band and freq, but it doesn’t show the country.
On my side it shows my country and ADIF number, but not on the other side.

Any ideas?
73
Nickus de Vos - ZS6J (Formerly ZR6JN)
KG44DD
Tell: 082 389 9477

On 28 Feb 2020, at 21:25, Larry Stowell K1ZW <wa2fif@...> wrote:

Dale
I don't believe that's the CQ zones, its the ITU zones
73 Larry K1ZW
On 2/28/2020 11:45 AM, K8TS wrote:
I would think the zone matters as LoTW tracks the WAZ program, am I incorrect?
South Orkney is Zone 13 according to my DARC map.
Dale K8TS
 
 
Sent from Mail for Windows 10
 
From: Scott Davis via Groups.Io
Sent: Friday, February 28, 2020 11:27 AM
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] VP8PJ - South Orkney Is.
 
Hi Nickus, 
 
Thanks for your follow up.  I can't speak to the zone where South Orkney Is. resides, but that is not part of the data LoTW processes on upload.
 
Thanks for the good report!
 
Enjoy!
 
73, Scott
N3FJP
 
Serving the Amateur Radio community with contesting and general logging software since 1997.
 
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...
 
-----Original Message-----
From: Nickus de Vos <shack@...>
To: N3FJPSoftwareUsers<N3FJPSoftwareUsers@groups.io>
Sent: Fri, Feb 28, 2020 11:15 am
Subject: Re: [N3FJPSoftwareUsers] VP8PJ - South Orkney Is.
I already worked them on 17 and 20.
Mine showed as Anartica and wondered what was up with that then I saw this message. 
 
I Downloaded the country files and when I selected edit on the contact, I got alerted that VP8PJ is South Orkney, so I just had to select ok and it fixed the country and ADIf ID for me.
 
I did however notice that the CQ zone on my contacts in AC Log is still listed as zone 12, but on the VP8PJ website the CQ zone is listed as zone 13.
 
So which is it, is it zone 12 or zone 13 and does this matter to LoTW? Obviously I want to be sure that I got everything correct before I upload to LoTW again.    
73
Nickus de Vos - ZS6J (Formerly ZR6JN) 
KG44DD
Tell: 082 389 9477


On 28 Feb 2020, at 14:39, Scott Davis via Groups.Io <SNKDavis@...> wrote:
 
Hi All,
 
If AC Log is still showing Antarctica for VP8PJ, please click File > Download Country Files from AD1C and then restart the software.  It will then show South Orkney Is.
 
Please make sure any QSOs with VP8PJ are logged as South Orkney Is. in the country field.  Any QSOs already logged as Antarctica will need to be manually edited.
 
Enjoy!
 
 
73, Scott
N3FJP
 
Serving the Amateur Radio community with contesting and general logging software since 1997.
 
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...
 
 


Re: VP8PJ - South Orkney Is.

Nickus de Vos
 

I uploaded my 2 VP8PJ contacts to LoTW again, but there’s no way of seeing if they are correct now.

If logging in to LoTW and looking at the uploaded QSO’s, it only shows the call VP8PJ, the time, band and freq, but it doesn’t show the country.
On my side it shows my country and ADIF number, but not on the other side.

Any ideas?
73
Nickus de Vos - ZS6J (Formerly ZR6JN)
KG44DD
Tell: 082 389 9477

On 28 Feb 2020, at 21:25, Larry Stowell K1ZW <wa2fif@...> wrote:

Dale

I don't believe that's the CQ zones, its the ITU zones

73 Larry K1ZW

On 2/28/2020 11:45 AM, K8TS wrote:
I would think the zone matters as LoTW tracks the WAZ program, am I incorrect?
South Orkney is Zone 13 according to my DARC map.
Dale K8TS
 
 
Sent from Mail for Windows 10
 
From: Scott Davis via Groups.Io
Sent: Friday, February 28, 2020 11:27 AM
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] VP8PJ - South Orkney Is.
 
Hi Nickus, 
 
Thanks for your follow up.  I can't speak to the zone where South Orkney Is. resides, but that is not part of the data LoTW processes on upload.
 
Thanks for the good report!
 
Enjoy!

 

73, Scott
N3FJP
 
Serving the Amateur Radio community with contesting and general logging software since 1997.
 
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...

 

-----Original Message-----
From: Nickus de Vos <shack@...>
To: N3FJPSoftwareUsers<N3FJPSoftwareUsers@groups.io>
Sent: Fri, Feb 28, 2020 11:15 am
Subject: Re: [N3FJPSoftwareUsers] VP8PJ - South Orkney Is.

I already worked them on 17 and 20.
Mine showed as Anartica and wondered what was up with that then I saw this message. 
 
I Downloaded the country files and when I selected edit on the contact, I got alerted that VP8PJ is South Orkney, so I just had to select ok and it fixed the country and ADIf ID for me.
 
I did however notice that the CQ zone on my contacts in AC Log is still listed as zone 12, but on the VP8PJ website the CQ zone is listed as zone 13.
 
So which is it, is it zone 12 or zone 13 and does this matter to LoTW? Obviously I want to be sure that I got everything correct before I upload to LoTW again.    
73
Nickus de Vos - ZS6J (Formerly ZR6JN) 
KG44DD
Tell: 082 389 9477


On 28 Feb 2020, at 14:39, Scott Davis via Groups.Io <SNKDavis@...> wrote:
 
Hi All,
 
If AC Log is still showing Antarctica for VP8PJ, please click File > Download Country Files from AD1C and then restart the software.  It will then show South Orkney Is.
 
Please make sure any QSOs with VP8PJ are logged as South Orkney Is. in the country field.  Any QSOs already logged as Antarctica will need to be manually edited.
 
Enjoy!
 

 

73, Scott
N3FJP
 
Serving the Amateur Radio community with contesting and general logging software since 1997.
 
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...
 
 


Re: SKCC

Scott Davis
 

Hi John,

Thanks for your e-mail.  To create a watch list, click File > Watch List, type the call(s) you want to watch for and press enter.  

It is possible that someone has already created a watch list for SKCC members, but I don't know if that is the case.

Enjoy!


73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: john farina <farina1952@...>
To: N3FJPSoftwareUsers <N3FJPSoftwareUsers@groups.io>
Sent: Sat, Feb 29, 2020 1:21 pm
Subject: [N3FJPSoftwareUsers] SKCC

Hi Scott and all,
I am a recent member of SKCC (Straight Key Century club). I am wondering if there might be an way to impliment checking membership info from within your software? Unfortunately although a logging software is available to club members as a blind op, it is not as friendly to the assistive technology I use as n3fjp is.
Thanks for any thoughts.

by the way, if you want to take a look at the logging software available, it is skcc logger.





SKCC

john farina <farina1952@...>
 

Hi Scott and all,
I am a recent member of SKCC (Straight Key Century club). I am wondering if there might be an way to impliment checking membership info from within your software? Unfortunately although a logging software is available to club members as a blind op, it is not as friendly to the assistive technology I use as n3fjp is.
Thanks for any thoughts.

by the way, if you want to take a look at the logging software available, it is skcc logger.


Re: 7300 no com port?

Kenneth W. Campbell
 

Rob,

Make sure that you have the latest USB driver from icom, then install it BEFORE you plug your USB cable into the 7300. If you didn’t follow his sequence, that may be the source of your problem. Good luck! 👍🏻😁
--
All the best,
Ken N6PCD


Re: Missing all DX Spots Says confirmed

Scott Davis
 

Hi Jim,

Thanks for your e-mail.  Form the menu options click Settings > New Contact & QSL Alert Options > New on Band and Mode.

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Jim K9TF <jim.gmforum@...>
To: N3FJPSoftwareUsers <N3FJPSoftwareUsers@groups.io>
Sent: Fri, Feb 28, 2020 8:48 pm
Subject: [N3FJPSoftwareUsers] Missing all DX Spots Says confirmed

Hi de Jim K9TF
While running trial version of N3FJP I was running Telenet
and a TZ showed up on 160M spot. It showed confirmed.
I have it confirmed on other bands but not on 160M how
do I fix this? I am sure this is happening for other spots as well.
 
I am using a Microsoft Surface Tablet running Windows 10.
 
I chase DXCC Challenge WAZ and WAS on 9 bands all modes.
I have over 2000 for DX Challenge.
 
Jim Borowski K9TF
 


Re: ACLog Screen Layout Configuration Data

K8TS
 

That’s superb to hear Chuck.  Thanks for the feedback.  Enjoy!!

Dale K8TS

 

Sent from Mail for Windows 10

 

From: Chuck Chamblee, W4LAC
Sent: Thursday, February 27, 2020 9:26 PM
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] ACLog Screen Layout Configuration Data

 

K8TS, it worked. Your method, that is. Using the 7300's USB connector's COM port for HDSDR's rig control via OmniRig, and the 7300's "Remote" jack via an older USB to 3.5mm Icom CI-V cable purchased from Amazon for $10 for the second COM port. I just had to use the "Unlink from Remote" setting for the CI-V USB Port on the 7300, "USB Serial Function" set to "CI-V", and both ports' baud rates set to 19.2K. I'm now running both HDSDR and ACLogger simultaneously, and both work.

 


Missing all DX Spots Says confirmed

Jim K9TF <jim.gmforum@...>
 

Hi de Jim K9TF

While running trial version of N3FJP I was running Telenet

and a TZ showed up on 160M spot. It showed confirmed.

I have it confirmed on other bands but not on 160M how

do I fix this? I am sure this is happening for other spots as well.

 

I am using a Microsoft Surface Tablet running Windows 10.

 

I chase DXCC Challenge WAZ and WAS on 9 bands all modes.

I have over 2000 for DX Challenge.

 

Jim Borowski K9TF

 


Re: Search Question

Dan Morris
 

Jeff - Only one problem I see with this search or ‘find’ is what about those calls like W5AAA or w9BBB that are actually in ‘7’ call area.  those would be hard to find.

There is a small program called ‘Award Tracker’ by W5DJT, David.  That little program can do wonders to search for what you need.  With that program it will search through numerous different logs but you would pick ACLog and load it in and then you could create a query to search for ALL the particular Calls in all the states in ‘7’ land.  that would definitely do the trick.

Dan Morris  KZ3T

I live to live for Him!



On Feb 28, 2020, at 2:02 PM, Jeff Grantham <jeff@...> wrote:

Thanks.  Didn't think of that.  Too easy!

Thanks Scott

From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> on behalf of Scott Davis via Groups.Io <SNKDavis@...>
Sent: Friday, February 28, 2020 11:39
To: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io>
Subject: Re: [N3FJPSoftwareUsers] Search Question
 
Hi Jeff,

Thanks for your e-mail.  Click the Find button and enter 7.

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Jeff Grantham <jeff@...>
To: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io>
Sent: Fri, Feb 28, 2020 12:04 pm
Subject: [N3FJPSoftwareUsers] Search Question

Is there a way to search only for calls that are say in call area 7?  Can you use *7*?


Thanks,
Jeff
KB5WCK
DMR ID: 3158487


Re: JT Alert New Entry Behavior? [was Re: Amateur Contact Log 6.0 and VT QP 1.2 are Now Available!]

philp51
 

Hi Scott, Tnx for your quick reply. You are right, I just didn't understand the intricacies of how everything works together. I was able to fix the problem by allowing JTAlert to download XML data as well AClog. Now the fields fill in correctly. Thanks for your help!! 73..Phil 


Re: JT Alert New Entry Behavior? [was Re: Amateur Contact Log 6.0 and VT QP 1.2 are Now Available!]

Scott Davis
 

Hi Philip,

Thanks for your follow up.  Because any fields that are clearing before entry are the result of JTAlert clearing the fields. 

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: philp51 <philp51@...>
To: N3FJPSoftwareUsers <N3FJPSoftwareUsers@groups.io>
Sent: Fri, Feb 28, 2020 5:27 pm
Subject: Re: [N3FJPSoftwareUsers] JT Alert New Entry Behavior? [was Re: Amateur Contact Log 6.0 and VT QP 1.2 are Now Available!]

Hi Scott, The problem may be coming from your software, The Xml data is filling in the boxes, comments field on the bottom of the screen including the station operator name, but it is not transferring the name data to the name column when I log the station. It worked fine yesterday, but it is not placing any names in the name column. How could JTAlert be causing that?


Re: JT Alert New Entry Behavior? [was Re: Amateur Contact Log 6.0 and VT QP 1.2 are Now Available!]

philp51
 

Hi Scott, The problem may be coming from your software, The Xml data is filling in the boxes, comments field on the bottom of the screen including the station operator name, but it is not transferring the name data to the name column when I log the station. It worked fine yesterday, but it is not placing any names in the name column. How could JTAlert be causing that?


Re: JT Alert New Entry Behavior? [was Re: Amateur Contact Log 6.0 and VT QP 1.2 are Now Available!]

Scott Davis
 

Hi Philip,

You may want to ping Laurie (JT Alert author) on this.  Nothing has changed regarding the API in my software and the behaviors you describe are controlled by JT Alert. 

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: philp51 <philp51@...>
To: N3FJPSoftwareUsers <N3FJPSoftwareUsers@groups.io>
Sent: Fri, Feb 28, 2020 1:52 pm
Subject: Re: [N3FJPSoftwareUsers] JT Alert New Entry Behavior? [was Re: Amateur Contact Log 6.0 and VT QP 1.2 are Now Available!]

I seem to have the same problem, I just started using ACLog,  almost everything works great. The name appears in the name box, and comments section of AClog page,but when I actually log the contact the name is not transferred to the name column for that log entry. It's a pain to copy and paste each time. Thanks for any suggestions...Phil W8PP


Re: VP8PJ - South Orkney Is.

Larry Stowell K1ZW
 

Dale

I don't believe that's the CQ zones, its the ITU zones

73 Larry K1ZW

On 2/28/2020 11:45 AM, K8TS wrote:

I would think the zone matters as LoTW tracks the WAZ program, am I incorrect?

South Orkney is Zone 13 according to my DARC map.

Dale K8TS

 

 

Sent from Mail for Windows 10

 

From: Scott Davis via Groups.Io
Sent: Friday, February 28, 2020 11:27 AM
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] VP8PJ - South Orkney Is.

 

Hi Nickus,

 

Thanks for your follow up.  I can't speak to the zone where South Orkney Is. resides, but that is not part of the data LoTW processes on upload.

 

Thanks for the good report!

 

Enjoy!

 

73, Scott

N3FJP

 

Serving the Amateur Radio community with contesting and general logging software since 1997.

 

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...

 

-----Original Message-----
From: Nickus de Vos <shack@...>
To: N3FJPSoftwareUsers <N3FJPSoftwareUsers@groups.io>
Sent: Fri, Feb 28, 2020 11:15 am
Subject: Re: [N3FJPSoftwareUsers] VP8PJ - South Orkney Is.

I already worked them on 17 and 20.

Mine showed as Anartica and wondered what was up with that then I saw this message.

 

I Downloaded the country files and when I selected edit on the contact, I got alerted that VP8PJ is South Orkney, so I just had to select ok and it fixed the country and ADIf ID for me.

 

I did however notice that the CQ zone on my contacts in AC Log is still listed as zone 12, but on the VP8PJ website the CQ zone is listed as zone 13.

 

So which is it, is it zone 12 or zone 13 and does this matter to LoTW? Obviously I want to be sure that I got everything correct before I upload to LoTW again.    

73

Nickus de Vos - ZS6J (Formerly ZR6JN)

KG44DD

Tell: 082 389 9477



On 28 Feb 2020, at 14:39, Scott Davis via Groups.Io <SNKDavis@...> wrote:

 

Hi All,

 

If AC Log is still showing Antarctica for VP8PJ, please click File > Download Country Files from AD1C and then restart the software.  It will then show South Orkney Is.

 

Please make sure any QSOs with VP8PJ are logged as South Orkney Is. in the country field.  Any QSOs already logged as Antarctica will need to be manually edited.

 

Enjoy!

 

 

73, Scott

N3FJP

 

Serving the Amateur Radio community with contesting and general logging software since 1997.

 

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...

 

 


Re: Search Question

Jeff Grantham
 

Thanks.  Didn't think of that.  Too easy!

Thanks Scott


From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> on behalf of Scott Davis via Groups.Io <SNKDavis@...>
Sent: Friday, February 28, 2020 11:39
To: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io>
Subject: Re: [N3FJPSoftwareUsers] Search Question
 
Hi Jeff,

Thanks for your e-mail.  Click the Find button and enter 7.

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Jeff Grantham <jeff@...>
To: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io>
Sent: Fri, Feb 28, 2020 12:04 pm
Subject: [N3FJPSoftwareUsers] Search Question

Is there a way to search only for calls that are say in call area 7?  Can you use *7*?


Thanks,
Jeff
KB5WCK
DMR ID: 3158487
http://kb5wck.com


Re: JT Alert New Entry Behavior? [was Re: Amateur Contact Log 6.0 and VT QP 1.2 are Now Available!]

philp51
 

I seem to have the same problem, I just started using ACLog,  almost everything works great. The name appears in the name box, and comments section of AClog page,but when I actually log the contact the name is not transferred to the name column for that log entry. It's a pain to copy and paste each time. Thanks for any suggestions...Phil W8PP


Re: LOTW upload

David Rounds
 

Madison,
Did you try to update your log from the LOTW site using the "Download" / "All Since" function.  Remember that the QSOs uploaded to LOTW do not immediately show as uploaded.  You need to use the "All Since" download function to see the QSOs that you uploaded that have not  yet been confirmed.
David
AK9F

On 2/28/2020 10:38 AM, Scott Davis via Groups.Io wrote:
Hi Madison,

Thanks for your e-mail.  I'm sorry that you have run into trouble.  ARRL's TQSL software actually does the upload.  AC Log just hands the records to TQSL for upload and then TQSL does the rest.

Since TQSL is reporting it has processed the upload and then reporting duplicates whey trying again, it sounds like AC Log is doing its part and that the problem is either with the TQSL software or the LoTW site.  The only thing I can think to suggest is to make sure your TQSL cert has not expired, or had an end date that you have now exceeded.

If that doesn't correct the problem, you'll need to contact the LoTW folks for more help there.

Good luck!


73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Madison R. Jones <w5mikejuliet@...>
To: N3FJPSoftwareUsers <N3FJPSoftwareUsers@groups.io>
Sent: Fri, Feb 28, 2020 11:32 am
Subject: [N3FJPSoftwareUsers] LOTW upload

I have been unable to upload QSOs to Logbook of the World since mid-January. I have selected the Qs I want to upload using the eLog function of N3FJP. Everything appears normal - the message says they have been signed for upload - but they do not appear in the LOTW QSO count. When I try to upload them again after a day or two, the message says they all have been signed and are duplicates. When I check upload duplicates anyway, it says they have all been processed for upload but again they do not appear in LOTW. According to ARRL's :LOTW desk, I have not uploaded any Qs for several weeks and that there are no error messages. My TQSL certificate is current.

How do I resolve this problem? Even if I were to put the Qs in a different file [which I don't know how to do] and sign them for uploading, I don't think I could ever incorporate them into my N3FJP log. Even if I could somehow do that, there is still the underlying problem which, if uncorrected, would prevent my using the LOTW function of N3FJP in the future, wouldn't it?

Regards,

Madison
W5MJ