Date   

Re: Aclog and fldigi

wa3gm
 

Yes it is checked
 Greg



Sent via the Samsung Galaxy S9+, an AT&T 5G Evolution capable smartphone

-------- Original message --------
From: Dan Morris <dbmorris315@...>
Date: 11/28/19 7:20 PM (GMT-05:00)
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] Aclog and fldigi

Oh, and below the box that has the ‘data stream’ make sure the little box for Enable data stream is checked as well

Dan Morris

I live to live for Him!




On Nov 28, 2019, at 7:03 PM, wa3gm via Groups.Io <wa3gm@...> wrote:

Dan
What settings are you using?.

Greg



Sent via the Samsung Galaxy S9+, an AT&T 5G Evolution capable smartphone

-------- Original message --------
From: Dan Morris <dbmorris315@...>
Date: 11/28/19 5:00 PM (GMT-05:00)
Subject: Re: [N3FJPSoftwareUsers] Aclog and fldigi

Greg - My fldigi puts everything in all the data fields in ACLog!!    In fact, as soon as I enter the call, all the data is filled in.

Dan Morris  KZ3T

I live to live for Him!



On Nov 28, 2019, at 1:23 PM, wa3gm via Groups.Io <wa3gm@...> wrote:

Scott ir anyone

 I have fl digi Where it will log the qso in to AC log but it will not put in the report......

Can I make this default to 599 and then change it if I have to.

Thanks
Greg wa3gm 



Sent via the Samsung Galaxy S9+, an AT&T 5G Evolution capable smartphone



Re: Aclog and fldigi

wa3gm
 

That is the settings i have also

It puts in everything except the signal report .

Greg 



Sent via the Samsung Galaxy S9+, an AT&T 5G Evolution capable smartphone

-------- Original message --------
From: Dan Morris <dbmorris315@...>
Date: 11/28/19 7:19 PM (GMT-05:00)
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] Aclog and fldigi

Go to:  Configure > Contest/Logging > N3FJP Logs —

Under N3FJP logs I have address as 127.0.0.1 and Port is 1100 and make sure to the right of the button that says ‘Default’ that the box is checked for ‘Connect’   —  

When you do that, then in a few seconds or so the little diamond below it should turn ‘green’ showing connected.    You should be good to go then.

Dan Morris

I live to live for Him!




On Nov 28, 2019, at 7:03 PM, wa3gm via Groups.Io <wa3gm@...> wrote:

Dan
What settings are you using?.

Greg



Sent via the Samsung Galaxy S9+, an AT&T 5G Evolution capable smartphone

-------- Original message --------
From: Dan Morris <dbmorris315@...>
Date: 11/28/19 5:00 PM (GMT-05:00)
Subject: Re: [N3FJPSoftwareUsers] Aclog and fldigi

Greg - My fldigi puts everything in all the data fields in ACLog!!    In fact, as soon as I enter the call, all the data is filled in.

Dan Morris  KZ3T

I live to live for Him!



On Nov 28, 2019, at 1:23 PM, wa3gm via Groups.Io <wa3gm@...> wrote:

Scott ir anyone

 I have fl digi Where it will log the qso in to AC log but it will not put in the report......

Can I make this default to 599 and then change it if I have to.

Thanks
Greg wa3gm 



Sent via the Samsung Galaxy S9+, an AT&T 5G Evolution capable smartphone



Re: Aclog and fldigi

Dan Morris
 

Oh, and below the box that has the ‘data stream’ make sure the little box for Enable data stream is checked as well

Dan Morris

I live to live for Him!




On Nov 28, 2019, at 7:03 PM, wa3gm via Groups.Io <wa3gm@...> wrote:

Dan
What settings are you using?.

Greg



Sent via the Samsung Galaxy S9+, an AT&T 5G Evolution capable smartphone

-------- Original message --------
From: Dan Morris <dbmorris315@...>
Date: 11/28/19 5:00 PM (GMT-05:00)
Subject: Re: [N3FJPSoftwareUsers] Aclog and fldigi

Greg - My fldigi puts everything in all the data fields in ACLog!!    In fact, as soon as I enter the call, all the data is filled in.

Dan Morris  KZ3T

I live to live for Him!



On Nov 28, 2019, at 1:23 PM, wa3gm via Groups.Io <wa3gm@...> wrote:

Scott ir anyone

 I have fl digi Where it will log the qso in to AC log but it will not put in the report......

Can I make this default to 599 and then change it if I have to.

Thanks
Greg wa3gm 



Sent via the Samsung Galaxy S9+, an AT&T 5G Evolution capable smartphone



Re: Aclog and fldigi

Dan Morris
 

Go to:  Configure > Contest/Logging > N3FJP Logs —

Under N3FJP logs I have address as 127.0.0.1 and Port is 1100 and make sure to the right of the button that says ‘Default’ that the box is checked for ‘Connect’   —  

When you do that, then in a few seconds or so the little diamond below it should turn ‘green’ showing connected.    You should be good to go then.

Dan Morris

I live to live for Him!




On Nov 28, 2019, at 7:03 PM, wa3gm via Groups.Io <wa3gm@...> wrote:

Dan
What settings are you using?.

Greg



Sent via the Samsung Galaxy S9+, an AT&T 5G Evolution capable smartphone

-------- Original message --------
From: Dan Morris <dbmorris315@...>
Date: 11/28/19 5:00 PM (GMT-05:00)
Subject: Re: [N3FJPSoftwareUsers] Aclog and fldigi

Greg - My fldigi puts everything in all the data fields in ACLog!!    In fact, as soon as I enter the call, all the data is filled in.

Dan Morris  KZ3T

I live to live for Him!



On Nov 28, 2019, at 1:23 PM, wa3gm via Groups.Io <wa3gm@...> wrote:

Scott ir anyone

 I have fl digi Where it will log the qso in to AC log but it will not put in the report......

Can I make this default to 599 and then change it if I have to.

Thanks
Greg wa3gm 



Sent via the Samsung Galaxy S9+, an AT&T 5G Evolution capable smartphone



Re: Aclog and fldigi

wa3gm
 

Dan
What settings are you using?.

Greg



Sent via the Samsung Galaxy S9+, an AT&T 5G Evolution capable smartphone

-------- Original message --------
From: Dan Morris <dbmorris315@...>
Date: 11/28/19 5:00 PM (GMT-05:00)
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] Aclog and fldigi

Greg - My fldigi puts everything in all the data fields in ACLog!!    In fact, as soon as I enter the call, all the data is filled in.

Dan Morris  KZ3T

I live to live for Him!



On Nov 28, 2019, at 1:23 PM, wa3gm via Groups.Io <wa3gm@...> wrote:

Scott ir anyone

 I have fl digi Where it will log the qso in to AC log but it will not put in the report......

Can I make this default to 599 and then change it if I have to.

Thanks
Greg wa3gm 



Sent via the Samsung Galaxy S9+, an AT&T 5G Evolution capable smartphone


CW Teacher

Joe WB9SBD
 

The one I have installed of the CW Teacher is version I guess 1.0

Is the one on the web site any newer?

Joe WB9SBD
--

The Original Rolling Ball Clock
Idle Tyme
Idle-Tyme.com
http://www.idle-tyme.com


Re: Aclog and fldigi

Dan Morris
 

Greg - My fldigi puts everything in all the data fields in ACLog!!    In fact, as soon as I enter the call, all the data is filled in.

Dan Morris  KZ3T

I live to live for Him!



On Nov 28, 2019, at 1:23 PM, wa3gm via Groups.Io <wa3gm@...> wrote:

Scott ir anyone

 I have fl digi Where it will log the qso in to AC log but it will not put in the report......

Can I make this default to 599 and then change it if I have to.

Thanks
Greg wa3gm 



Sent via the Samsung Galaxy S9+, an AT&T 5G Evolution capable smartphone


Aclog and fldigi

wa3gm
 

Scott ir anyone

 I have fl digi Where it will log the qso in to AC log but it will not put in the report......

Can I make this default to 599 and then change it if I have to.

Thanks
Greg wa3gm 



Sent via the Samsung Galaxy S9+, an AT&T 5G Evolution capable smartphone


Re: HAPPY THANKSGIVING!

Scott Davis
 

Thanks so much for your very kind and heartfelt wishes Ken.  Kimberly and I really appreciate it!

All, Happy Thanksgiving!  :)

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Kenneth W. Campbell <n6pcd1@...>
To: N3FJPSoftwareUsers <N3FJPSoftwareUsers@groups.io>
Sent: Thu, Nov 28, 2019 10:36 am
Subject: [N3FJPSoftwareUsers] HAPPY THANKSGIVING!

Here’s a wish for all our fellow N3FJP friends, that you and yours have a happy and blessed Thanksgiving. We are especially thankful to Scott and Kimberly for their efforts in writing he best software in Hamdom! Your many hours of work and support are much appreciated! 😁
--
All the best,
Ken N6PCD
Pat N6PRC


HAPPY THANKSGIVING!

Kenneth W. Campbell
 

Here’s a wish for all our fellow N3FJP friends, that you and yours have a happy and blessed Thanksgiving. We are especially thankful to Scott and Kimberly for their efforts in writing he best software in Hamdom! Your many hours of work and support are much appreciated! 😁
--
All the best,
Ken N6PCD
Pat N6PRC


N3FJP "Running on CW"

Glenn Kurzenknabe <bgkurz@...>
 

This is the response I got from a local, who is pretty tuned in…    I haven’t played with it yet…

73

Glenn, K3SWZ

 

N3FJP now supports RUN MODE CW.  Some bullet-point details follow.

 

Scott has a fairly new feature called TSM (Tab Sends Message).  This goes along with ESM (Enter Sends Message) that N1MM+ offers.

The difference is that with N3FJP you have to press two different keys based on the contact state/context whereas N1MM+ has sufficiently strong logic enabling it to figure out which message you want to send.

 

Go into SETTINGS, TRANSMIT, CW and examine the Function Keys configuration.

Whatever you configure as the F2 function key commands will be transmitted when you fill in the callsign field and then press TAB.  That is the first part of a RUN QSO.

Whatever you configure as the F3 function key commands will be transmitted when you fill in the other guy’s exchange and then press ENTER.

 

For the recent PA QSO Party I had these configurations:

F2    $ # %    which sends the other guy’s call sign, my serial number, and my county

F3    R TU QRZ PAQP K3IEC    which is all plain text and easily readable.

 

There is an additional step required for enabling the TAB SENDS MESSAGE

From the N3FJP main screen where you do your logging, type CTRL+SHIFT+G to ENABLE TSM    [Press and hold CTRL, Press and hold SHIFT, type G.  Let go of all three.]

The software will return a confirmation message onto your N3FJP screen.

 

The same keystroke combination will DISABLE TSM if or when you no longer desire to use that feature.

 

Other function keys....

F1 is dedicated to the CQ CONTEST message.

The other function keys can be configured for whatever commands you may wish to transmit.

I have mine function keys set up for resending the exchange, asking for AGN, and sending a slowed-down version of my callsign.

 

 


Re: Louisiana QSO Party

Bobby Baker
 

Thanks Scott, I will make sure that we put a note on our website to ACLog users to please do a update. I will let you know how many did because I will be able to tell....Thanks again.
Bobby Baker WM5H
Ouachita Parish Sheriff's Office (Retired)
136 Northwood Drive
West Monroe, Louisiana 71291
Cell 318-732-9239
________________________________________
From: N3FJPSoftwareUsers@groups.io [N3FJPSoftwareUsers@groups.io] On Behalf Of Scott Davis via Groups.Io [SNKDavis=aol.com@groups.io]
Sent: Thursday, November 28, 2019 04:48
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] Louisiana QSO Party

Hi Bobby,

Thanks for your e-mail. You bet. I've just updated the software code as you requested. This will be part of the global contest software release I am planning for January, Lord willing.

Consider it done! :)

Happy Thanksgiving!


73, Scott
N3FJP
http://www.n3fjp.com

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for <http://www.n3fjp.com/Faith.htm> the hope that you have<http://www.n3fjp.com/Faith.htm>. But do this with gentleness and respect...


-----Original Message-----
From: Bobby Baker <robert.baker@opso.net>
To: N3FJPSoftwareUsers <N3FJPSoftwareUsers@groups.io>
Sent: Wed, Nov 27, 2019 4:20 pm
Subject: [N3FJPSoftwareUsers] Louisiana QSO Party

Scott, we have recently started using checking software when checking LAQP logs and in the cabrillo file N3FJP creates the contest name is "LAQP" is there a way to change that to say"LA-QSO-PARTY". This is the contest name it wants to see. Would be a great help as at the present time i have to go into each log and correct it before we can run the log.

Thanks
Bobby Baker WM5H


Re: FIL SETTINGS ETC TOP MENU logdata.mdb and info bar

Wilbur Doolittle
 

Thnx Happy Holiday!


On Thu, Nov 28, 2019 at 5:52 AM Scott Davis via Groups.Io <SNKDavis=aol.com@groups.io> wrote:
Hi Wilbur,

Thanks for your e-mail.  There isn't a way to customize the menu font size individually yet.  To reset your font settings, click Settings > Appearance > Colors and Fonts and click the button to reset.

You will find the button to change the bearing, etc., font size on the same form in AC Log 6.6.

Enjoy!


73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Wilbur Doolittle <johndeere75549011@...>
To: N3FJPSoftwareUsers <N3FJPSoftwareUsers@groups.io>
Sent: Wed, Nov 27, 2019 6:00 pm
Subject: [N3FJPSoftwareUsers] FIL SETTINGS ETC TOP MENU logdata.mdb and info bar

Is there some way to adjust font size when adjusting window size or do I need to delete the config file or what files to get back on track

also I have to adjust bearing font to keep clock visible?
thanks AB8WD


Re: FIL SETTINGS ETC TOP MENU logdata.mdb and info bar

Scott Davis
 

Hi Wilbur,

Thanks for your e-mail.  There isn't a way to customize the menu font size individually yet.  To reset your font settings, click Settings > Appearance > Colors and Fonts and click the button to reset.

You will find the button to change the bearing, etc., font size on the same form in AC Log 6.6.

Enjoy!


73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Wilbur Doolittle <johndeere75549011@...>
To: N3FJPSoftwareUsers <N3FJPSoftwareUsers@groups.io>
Sent: Wed, Nov 27, 2019 6:00 pm
Subject: [N3FJPSoftwareUsers] FIL SETTINGS ETC TOP MENU logdata.mdb and info bar

Is there some way to adjust font size when adjusting window size or do I need to delete the config file or what files to get back on track

also I have to adjust bearing font to keep clock visible?
thanks AB8WD


Re: Louisiana QSO Party

Scott Davis
 

Hi Bobby,

Thanks for your e-mail.  You bet.  I've just updated the software code as you requested.  This will be part of the global contest software release I am planning for January, Lord willing.

Consider it done!  :)

Happy Thanksgiving!


73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Bobby Baker <robert.baker@...>
To: N3FJPSoftwareUsers <N3FJPSoftwareUsers@groups.io>
Sent: Wed, Nov 27, 2019 4:20 pm
Subject: [N3FJPSoftwareUsers] Louisiana QSO Party

Scott, we have recently started using checking software when checking LAQP logs and in the cabrillo file N3FJP creates the contest name is "LAQP" is there a way to change that to say"LA-QSO-PARTY".  This is the contest name it wants to see.   Would be a great help as at the present time i have to go into each log and correct it before we can run the log.

Thanks
Bobby Baker WM5H


Re: "Running" question -- GOT IT!

George Sabinar
 

What was the answer? There may be others who also may want to know.

G.

KD4FJ

On Wednesday, November 27, 2019, 07:26:37 PM CST, Glenn Kurzenknabe via Groups.Io <bgkurz@...> wrote:


I got the answer to my question….

TNX

Glenn, K3SWZ


"Running" question -- GOT IT!

Glenn Kurzenknabe <bgkurz@...>
 

I got the answer to my question….

TNX

Glenn, K3SWZ


Running on CW with N3FJP

Glenn Kurzenknabe <bgkurz@...>
 

Can anyone tell me how to “run” on CW with N3FJP???  Phone is obvious, but I cannot figure out anyway to “run” on CW??

CQ WW DX,  ARRL DX Contest, ARRL and CQ 160 Contests in particular..

Thanks

73

Glenn, K3SWZ


FIL SETTINGS ETC TOP MENU logdata.mdb and info bar

Wilbur Doolittle
 

Is there some way to adjust font size when adjusting window size or do I need to delete the config file or what files to get back on track

also I have to adjust bearing font to keep clock visible?
thanks AB8WD


Louisiana QSO Party

Bobby Baker
 

Scott, we have recently started using checking software when checking LAQP logs and in the cabrillo file N3FJP creates the contest name is "LAQP" is there a way to change that to say"LA-QSO-PARTY".  This is the contest name it wants to see.   Would be a great help as at the present time i have to go into each log and correct it before we can run the log.

Thanks
Bobby Baker WM5H

7821 - 7840 of 46848