Date   

Re: QRZ Error Message

James AG5VE
 

Seems every ham forum and most ham clubs nowadays have their share of trolls dressed in "Elmer" suits. 

No wonder noobs like me are hesitant to ask questions...

JMc
AG5VE


On Tue, Sep 17, 2019 at 4:58 PM, Mike Olbrisch
<mike-2020@...> wrote:

Pat,

 

Don’t worry.  At first I wondered if it was a Windows issue, an AC-Log issue, or a QRZ issue.  So I ran another logging program over night, and got the same error.  That eliminated AC-Log.  If you did not have the opportunity to try that, it wasn’t 100% clear and I thought your question was valid.

 

Some folks just wake up to 7 Mondays a week, and some forget they have a delete key and can even block a whole thread.  When I identify them, I drop them on a block list and they never bother me again.  You’re fine sir…….  And if you get an answer from QRZ, please share it.  You’re not the only person seeing that happen.

 

Mike – KD5KC -- El Paso -- Texas.

 

The canyons are calling, colorful and deep.  But I have promises to keep.

And miles to go still in my Jeep...   And miles to go still in my Jeep...

 

Big Bend JEEP Rear

 

ADVENTURE:  The respectful pursuit of trouble.

 

 

 

 

From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of Pat Whelton
Sent: Tuesday, September 17, 2019 12:03 PM
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] QRZ Error Message

 

Thank you Dean for taking the time to comment on QRZ’d problem and then reminding us that it doesn’t belong here.

 

Pat - KZ5J

 

Sent: Tuesday, September 17, 2019 12:16 PM

Subject: Re: [N3FJPSoftwareUsers] QRZ Error Message

 

Has anyone bothered to ask the QRZ folks about this? It could be something they have set up as their security. I have never seen an online account that does not time out after a period of inactivity. Something that clearly has nothing to do with Scott's software is getting a lot of time on here.

 

 

Dean, KC9EOQ

 

On Tue, Sep 17, 2019 at 8:00 AM Pat Whelton <pwhelton@...> wrote:

Sorry my tracking is not that detailed.  It’s just frustrating when you’re in a hurry and you want to look up QSL info on a rare one and QRZ won’t give you the address until you log on.  You then log on and figure that’s the end of it but a couple of days later you have to logon again.

 

Pat - KZ5J

 

Sent: Tuesday, September 17, 2019 7:55 AM

Subject: Re: [N3FJPSoftwareUsers] QRZ Error Message

 

Good morning Pat.

 

Have you noticed or can you look back and see how long it was since the previous entry when this happened?  That just might be interesting to know.  I suspect it is something like 12 hours, but I don’t think I’ve ever experienced it twice on one day, so my log wouldn’t show something like that.

 

Have a GREAT day sir.

 

Vy73 - Mike - KD5KC.

El Paso, Texas - DM61rt.

SOTA W5T-Texas Association Manager.

NA-SOTA info is at:  http://na-sota.org/

 

 

 

From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of Pat Whelton
Sent: Tuesday, September 17, 2019 6:48 AM
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] QRZ Error Message

 

Glad I’m not the only one having problems with QRZ.   My issue is I have to log on to QRZ more often than I would like.  I can understand being forced to logon maybe twice a year but more than that is a pain in the a**.  I’ve been keeping track of it and here is my experience in the last two months:

 

QRZ Login

=========

8/06/19 – Twice

8/23/19

9/11/19

9/14/19

9/15/19 – Twice

 

A little much in my opinion.

 

Also I my subscription is paid up unitl 5/31/2020 and I really don’t use QRZ all that much.

 

Regards,

 

Pat - KZ5J

 

Sent: Tuesday, September 17, 2019 7:30 AM

Subject: Re: [N3FJPSoftwareUsers] QRZ Error Message

 

Morning Paul.

 

I get the same error.  I am not certain if the computer going to sleep has as much to do with it as the time elapsed since the last QRZ database access.  I get this error early in the morning after sleeping all night, but I sometimes get it after logging the local 80m guys at 5-am, then late in the afternoon making another contact.  It seems if I make several contacts spread through-out the day (like SOTA chasing) that the database is “kept alive” by the periodic use.  The computer often goes to sleep between entries, but the error only appears after a prolonged sleep.  I’ve not bothered to try to time it.

 

What frustrates me more is this.  I have a computer dedicated to logging and digital.  I’ve told that computer to “Remember”
my credentials for QRZ.  But every now and then it forgets something and I have to manually log into QRZ again.  That doesn’t happen real often.  Not even monthly.  But even once is more than I intended.  I use strange passwords, and I don’t trust password management programs, so when it does this I have to look it up every time.

 

I’ll leave you with this.  To err is human….. but to really foul things up takes a computer.

 

Have a SUPER day.

 

Mike – KD5KC -- El Paso -- Texas.

 

The canyons are calling, colorful and deep.  But I have promises to keep.

And miles to go still in my Jeep...   And miles to go still in my Jeep...

 

Big Bend JEEP Rear

 

ADVENTURE:  The respectful pursuit of trouble.

 

 

 

 

From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of Paul Rasp
Sent: Tuesday, September 17, 2019 4:10 AM
To: N3FJPSoftwareUsers@groups.io
Subject: [N3FJPSoftwareUsers] QRZ Error Message

 


Scott,

Is this error as a result of my computer going to "sleep"


"There was an error accessing the QRZ internet database. Session Timeout."

Or is there some other explanation?

73
Paul
W4ARK


Re: QRZ Error Message

Mike Olbrisch
 

Pat,

 

Don’t worry.  At first I wondered if it was a Windows issue, an AC-Log issue, or a QRZ issue.  So I ran another logging program over night, and got the same error.  That eliminated AC-Log.  If you did not have the opportunity to try that, it wasn’t 100% clear and I thought your question was valid.

 

Some folks just wake up to 7 Mondays a week, and some forget they have a delete key and can even block a whole thread.  When I identify them, I drop them on a block list and they never bother me again.  You’re fine sir…….  And if you get an answer from QRZ, please share it.  You’re not the only person seeing that happen.

 

Mike – KD5KC -- El Paso -- Texas.

 

The canyons are calling, colorful and deep.  But I have promises to keep.

And miles to go still in my Jeep...   And miles to go still in my Jeep...

 

Big Bend JEEP Rear

 

ADVENTURE:  The respectful pursuit of trouble.

 

 

 

 

From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of Pat Whelton
Sent: Tuesday, September 17, 2019 12:03 PM
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] QRZ Error Message

 

Thank you Dean for taking the time to comment on QRZ’d problem and then reminding us that it doesn’t belong here.

 

Pat - KZ5J

 

Sent: Tuesday, September 17, 2019 12:16 PM

Subject: Re: [N3FJPSoftwareUsers] QRZ Error Message

 

Has anyone bothered to ask the QRZ folks about this? It could be something they have set up as their security. I have never seen an online account that does not time out after a period of inactivity. Something that clearly has nothing to do with Scott's software is getting a lot of time on here.

 

 

Dean, KC9EOQ

 

On Tue, Sep 17, 2019 at 8:00 AM Pat Whelton <pwhelton@...> wrote:

Sorry my tracking is not that detailed.  It’s just frustrating when you’re in a hurry and you want to look up QSL info on a rare one and QRZ won’t give you the address until you log on.  You then log on and figure that’s the end of it but a couple of days later you have to logon again.

 

Pat - KZ5J

 

Sent: Tuesday, September 17, 2019 7:55 AM

Subject: Re: [N3FJPSoftwareUsers] QRZ Error Message

 

Good morning Pat.

 

Have you noticed or can you look back and see how long it was since the previous entry when this happened?  That just might be interesting to know.  I suspect it is something like 12 hours, but I don’t think I’ve ever experienced it twice on one day, so my log wouldn’t show something like that.

 

Have a GREAT day sir.

 

Vy73 - Mike - KD5KC.

El Paso, Texas - DM61rt.

SOTA W5T-Texas Association Manager.

NA-SOTA info is at:  http://na-sota.org/

 

 

 

From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of Pat Whelton
Sent: Tuesday, September 17, 2019 6:48 AM
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] QRZ Error Message

 

Glad I’m not the only one having problems with QRZ.   My issue is I have to log on to QRZ more often than I would like.  I can understand being forced to logon maybe twice a year but more than that is a pain in the a**.  I’ve been keeping track of it and here is my experience in the last two months:

 

QRZ Login

=========

8/06/19 – Twice

8/23/19

9/11/19

9/14/19

9/15/19 – Twice

 

A little much in my opinion.

 

Also I my subscription is paid up unitl 5/31/2020 and I really don’t use QRZ all that much.

 

Regards,

 

Pat - KZ5J

 

Sent: Tuesday, September 17, 2019 7:30 AM

Subject: Re: [N3FJPSoftwareUsers] QRZ Error Message

 

Morning Paul.

 

I get the same error.  I am not certain if the computer going to sleep has as much to do with it as the time elapsed since the last QRZ database access.  I get this error early in the morning after sleeping all night, but I sometimes get it after logging the local 80m guys at 5-am, then late in the afternoon making another contact.  It seems if I make several contacts spread through-out the day (like SOTA chasing) that the database is “kept alive” by the periodic use.  The computer often goes to sleep between entries, but the error only appears after a prolonged sleep.  I’ve not bothered to try to time it.

 

What frustrates me more is this.  I have a computer dedicated to logging and digital.  I’ve told that computer to “Remember”
my credentials for QRZ.  But every now and then it forgets something and I have to manually log into QRZ again.  That doesn’t happen real often.  Not even monthly.  But even once is more than I intended.  I use strange passwords, and I don’t trust password management programs, so when it does this I have to look it up every time.

 

I’ll leave you with this.  To err is human….. but to really foul things up takes a computer.

 

Have a SUPER day.

 

Mike – KD5KC -- El Paso -- Texas.

 

The canyons are calling, colorful and deep.  But I have promises to keep.

And miles to go still in my Jeep...   And miles to go still in my Jeep...

 

Big Bend JEEP Rear

 

ADVENTURE:  The respectful pursuit of trouble.

 

 

 

 

From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of Paul Rasp
Sent: Tuesday, September 17, 2019 4:10 AM
To: N3FJPSoftwareUsers@groups.io
Subject: [N3FJPSoftwareUsers] QRZ Error Message

 


Scott,

Is this error as a result of my computer going to "sleep"


"There was an error accessing the QRZ internet database. Session Timeout."

Or is there some other explanation?

73
Paul
W4ARK


Re: Winkeyer Setup

Andy K7AMB
 

That is quiet alright Scott.  (Sorry I called you steve in the post, duh).  I am quite happy with the Winkeyer integration into ACLog.  Its very nice


Re: Winkeyer Setup

Scott Davis
 

Hi Andy,

Thanks for your e-mail.  The actual text boxes don't resize with the form.  That is intentional, so that folks who only want to display the first few can do so and make the whole form smaller without making the individual text boxes too small.

I'm sorry I didn't have the answer you were looking for.

Enjoy!


73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Andrew Ambrosia via Groups.Io <ambroinaz@...>
To: N3FJPSoftwareUsers <N3FJPSoftwareUsers@groups.io>
Sent: Tue, Sep 17, 2019 3:28 pm
Subject: Re: [N3FJPSoftwareUsers] Winkeyer Setup

I have my Winkeyer setup and working great with ACLog.  Its very cool.  Nice work Steve! 

I have one question which there may or may not be a solution for:

Question:  Can the CW mini form (below) be widened  (the window of the form) a few inches so that I could see the whole CW message that I have configured for the F function key?  Is there any way to adjust the window size like you can with the main ACLog interface?

Thanks,
Andy K7AMB



Re: QRZ Error Message

Scott Davis
 

Hi Guys,

If QRZ times out, it is not necessary to close AC Log to reconnect.  Just close the error message, tab through the call field again with a valid call and AC Log will automatically reconnect.

Enjoy!


73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Grahame Emerson <uk2us1962@...>
To: N3FJPSoftwareUsers <N3FJPSoftwareUsers@groups.io>
Sent: Tue, Sep 17, 2019 4:34 pm
Subject: Re: [N3FJPSoftwareUsers] QRZ Error Message

Pat,
I never log out of QRZI just “red X” out to close the program.  That way, ACL is always able to bring up the other stations info
Grahame. AD6GE
 
From: N3FJPSoftwareUsers@groups.io [mailto:N3FJPSoftwareUsers@groups.io] On Behalf Of Pat Whelton
Sent: Tuesday, September 17, 2019 6:00 AM
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] QRZ Error Message
 
Sorry my tracking is not that detailed.  It’s just frustrating when you’re in a hurry and you want to look up QSL info on a rare one and QRZ won’t give you the address until you log on.  You then log on and figure that’s the end of it but a couple of days later you have to logon again.
 
Pat - KZ5J
 
Sent: Tuesday, September 17, 2019 7:55 AM
Subject: Re: [N3FJPSoftwareUsers] QRZ Error Message
 
Good morning Pat.
 
Have you noticed or can you look back and see how long it was since the previous entry when this happened?  That just might be interesting to know.  I suspect it is something like 12 hours, but I don’t think I’ve ever experienced it twice on one day, so my log wouldn’t show something like that.
 
Have a GREAT day sir.
 
Vy73 - Mike - KD5KC.
El Paso, Texas - DM61rt.
SOTA W5T-Texas Association Manager.
NA-SOTA info is at:  http://na-sota.org/
 
 
 
From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of Pat Whelton
Sent: Tuesday, September 17, 2019 6:48 AM
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] QRZ Error Message
 
Glad I’m not the only one having problems with QRZ.   My issue is I have to log on to QRZ more often than I would like.  I can understand being forced to logon maybe twice a year but more than that is a pain in the a**.  I’ve been keeping track of it and here is my experience in the last two months:
 
QRZ Login
=========
8/06/19 – Twice
8/23/19
9/11/19
9/14/19
9/15/19 – Twice
 
A little much in my opinion.
 
Also I my subscription is paid up unitl 5/31/2020 and I really don’t use QRZ all that much.
 
Regards,
 
Pat - KZ5J
 
Sent: Tuesday, September 17, 2019 7:30 AM
Subject: Re: [N3FJPSoftwareUsers] QRZ Error Message
 
Morning Paul.
 
I get the same error.  I am not certain if the computer going to sleep has as much to do with it as the time elapsed since the last QRZ database access.  I get this error early in the morning after sleeping all night, but I sometimes get it after logging the local 80m guys at 5-am, then late in the afternoon making another contact.  It seems if I make several contacts spread through-out the day (like SOTA chasing) that the database is “kept alive” by the periodic use.  The computer often goes to sleep between entries, but the error only appears after a prolonged sleep.  I’ve not bothered to try to time it.
 
What frustrates me more is this.  I have a computer dedicated to logging and digital.  I’ve told that computer to “Remember”
my credentials for QRZ.  But every now and then it forgets something and I have to manually log into QRZ again.  That doesn’t happen real often.  Not even monthly.  But even once is more than I intended.  I use strange passwords, and I don’t trust password management programs, so when it does this I have to look it up every time.
 
I’ll leave you with this.  To err is human….. but to really foul things up takes a computer.
 
Have a SUPER day.
 
Mike – KD5KC -- El Paso -- Texas.
 
The canyons are calling, colorful and deep.  But I have promises to keep.
And miles to go still in my Jeep...   And miles to go still in my Jeep...
 
Big Bend JEEP Rear
 
ADVENTURE:  The respectful pursuit of trouble.
 
 
 
 
From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of Paul Rasp
Sent: Tuesday, September 17, 2019 4:10 AM
To: N3FJPSoftwareUsers@groups.io
Subject: [N3FJPSoftwareUsers] QRZ Error Message
 

Scott,

Is this error as a result of my computer going to "sleep"


"There was an error accessing the QRZ internet database. Session Timeout."

Or is there some other explanation?

73
Paul
W4ARK


Re: QRZ Error Message

Grahame Emerson
 

Pat,

I never log out of QRZI just “red X” out to close the program.  That way, ACL is always able to bring up the other stations info

Grahame. AD6GE

 

From: N3FJPSoftwareUsers@groups.io [mailto:N3FJPSoftwareUsers@groups.io] On Behalf Of Pat Whelton
Sent: Tuesday, September 17, 2019 6:00 AM
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] QRZ Error Message

 

Sorry my tracking is not that detailed.  It’s just frustrating when you’re in a hurry and you want to look up QSL info on a rare one and QRZ won’t give you the address until you log on.  You then log on and figure that’s the end of it but a couple of days later you have to logon again.

 

Pat - KZ5J

 

Sent: Tuesday, September 17, 2019 7:55 AM

Subject: Re: [N3FJPSoftwareUsers] QRZ Error Message

 

Good morning Pat.

 

Have you noticed or can you look back and see how long it was since the previous entry when this happened?  That just might be interesting to know.  I suspect it is something like 12 hours, but I don’t think I’ve ever experienced it twice on one day, so my log wouldn’t show something like that.

 

Have a GREAT day sir.

 

Vy73 - Mike - KD5KC.

El Paso, Texas - DM61rt.

SOTA W5T-Texas Association Manager.

NA-SOTA info is at:  http://na-sota.org/

 

 

 

From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of Pat Whelton
Sent: Tuesday, September 17, 2019 6:48 AM
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] QRZ Error Message

 

Glad I’m not the only one having problems with QRZ.   My issue is I have to log on to QRZ more often than I would like.  I can understand being forced to logon maybe twice a year but more than that is a pain in the a**.  I’ve been keeping track of it and here is my experience in the last two months:

 

QRZ Login

=========

8/06/19 – Twice

8/23/19

9/11/19

9/14/19

9/15/19 – Twice

 

A little much in my opinion.

 

Also I my subscription is paid up unitl 5/31/2020 and I really don’t use QRZ all that much.

 

Regards,

 

Pat - KZ5J

 

Sent: Tuesday, September 17, 2019 7:30 AM

Subject: Re: [N3FJPSoftwareUsers] QRZ Error Message

 

Morning Paul.

 

I get the same error.  I am not certain if the computer going to sleep has as much to do with it as the time elapsed since the last QRZ database access.  I get this error early in the morning after sleeping all night, but I sometimes get it after logging the local 80m guys at 5-am, then late in the afternoon making another contact.  It seems if I make several contacts spread through-out the day (like SOTA chasing) that the database is “kept alive” by the periodic use.  The computer often goes to sleep between entries, but the error only appears after a prolonged sleep.  I’ve not bothered to try to time it.

 

What frustrates me more is this.  I have a computer dedicated to logging and digital.  I’ve told that computer to “Remember”
my credentials for QRZ.  But every now and then it forgets something and I have to manually log into QRZ again.  That doesn’t happen real often.  Not even monthly.  But even once is more than I intended.  I use strange passwords, and I don’t trust password management programs, so when it does this I have to look it up every time.

 

I’ll leave you with this.  To err is human….. but to really foul things up takes a computer.

 

Have a SUPER day.

 

Mike – KD5KC -- El Paso -- Texas.

 

The canyons are calling, colorful and deep.  But I have promises to keep.

And miles to go still in my Jeep...   And miles to go still in my Jeep...

 

Big Bend JEEP Rear

 

ADVENTURE:  The respectful pursuit of trouble.

 

 

 

 

From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of Paul Rasp
Sent: Tuesday, September 17, 2019 4:10 AM
To: N3FJPSoftwareUsers@groups.io
Subject: [N3FJPSoftwareUsers] QRZ Error Message

 


Scott,

Is this error as a result of my computer going to "sleep"


"There was an error accessing the QRZ internet database. Session Timeout."

Or is there some other explanation?

73
Paul
W4ARK


Re: Winkeyer Setup

Andy K7AMB
 

I have my Winkeyer setup and working great with ACLog.  Its very cool.  Nice work Steve! 

I have one question which there may or may not be a solution for:

Question:  Can the CW mini form (below) be widened  (the window of the form) a few inches so that I could see the whole CW message that I have configured for the F function key?  Is there any way to adjust the window size like you can with the main ACLog interface?

Thanks,
Andy K7AMB



Re: QRZ Error Message

W4ARK
 

Thank you for your response Scott,

"

Sessions

The QRZ XML server maintains login/logout state information on for each user through the use of a session key. Upon successful login, an encrypted session key is returned to the client application which must be cached so that it can be used with subsequent data requests to the server.

Session keys are unique and are recreated each time a user logs in. A session key is valid for only one user at a time, logging in from a single IP address.

Session keys are temporary in nature and may be valid up to 24 hours. Whenever a user logs in, any previously issued session keys are invalidated. A session key may also be invalidated at any time by the server, so client applications should be prepared to re-login at any time."

These timeout errors are within a 8-10 hour period.

https://www.qrz.com/XML/specifications.1.8.html

 

73

Paul
W4ARK


Re: QRZ Error Message

W4ARK
 

I receive the error message that I've described only when I have ACL open.  I use QRZ lookup service and my reason for posting in this group was because I thought there might be some glitch in the interface provided for client programs ( N3FJP) that connect to the QRZ.COM database.   

I have no issues accessing the QRZ site with a browser.



73

Paul

W4ARK



On September 17, 2019 at 1:03 PM Pat Whelton <pwhelton@...> wrote:

Thank you Dean for taking the time to comment on QRZ’d problem and then reminding us that it doesn’t belong here.
 
Pat - KZ5J
 
Sent: Tuesday, September 17, 2019 12:16 PM
Subject: Re: [N3FJPSoftwareUsers] QRZ Error Message
 
Has anyone bothered to ask the QRZ folks about this? It could be something they have set up as their security. I have never seen an online account that does not time out after a period of inactivity. Something that clearly has nothing to do with Scott's software is getting a lot of time on here.


Dean, KC9EOQ
 
On Tue, Sep 17, 2019 at 8:00 AM Pat Whelton < pwhelton@...> wrote:
Sorry my tracking is not that detailed.  It’s just frustrating when you’re in a hurry and you want to look up QSL info on a rare one and QRZ won’t give you the address until you log on.  You then log on and figure that’s the end of it but a couple of days later you have to logon again.
 
Pat - KZ5J
 
Sent: Tuesday, September 17, 2019 7:55 AM
Subject: Re: [N3FJPSoftwareUsers] QRZ Error Message
 

Good morning Pat.

 

Have you noticed or can you look back and see how long it was since the previous entry when this happened?  That just might be interesting to know.  I suspect it is something like 12 hours, but I don’t think I’ve ever experienced it twice on one day, so my log wouldn’t show something like that.

 

Have a GREAT day sir.

 

Vy73 - Mike - KD5KC.

El Paso, Texas - DM61rt.

SOTA W5T-Texas Association Manager.

NA-SOTA info is at:  http://na-sota.org/

 

 

 

From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of Pat Whelton
Sent: Tuesday, September 17, 2019 6:48 AM
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] QRZ Error Message

 

Glad I’m not the only one having problems with QRZ.   My issue is I have to log on to QRZ more often than I would like.  I can understand being forced to logon maybe twice a year but more than that is a pain in the a**.  I’ve been keeping track of it and here is my experience in the last two months:

 

QRZ Login

=========

8/06/19 – Twice

8/23/19

9/11/19

9/14/19

9/15/19 – Twice

 

A little much in my opinion.

 

Also I my subscription is paid up unitl 5/31/2020 and I really don’t use QRZ all that much.

 

Regards,

 

Pat - KZ5J

 

Sent: Tuesday, September 17, 2019 7:30 AM

Subject: Re: [N3FJPSoftwareUsers] QRZ Error Message

 

Morning Paul.

 

I get the same error.  I am not certain if the computer going to sleep has as much to do with it as the time elapsed since the last QRZ database access.  I get this error early in the morning after sleeping all night, but I sometimes get it after logging the local 80m guys at 5-am, then late in the afternoon making another contact.  It seems if I make several contacts spread through-out the day (like SOTA chasing) that the database is “kept alive” by the periodic use.  The computer often goes to sleep between entries, but the error only appears after a prolonged sleep.  I’ve not bothered to try to time it.

 

What frustrates me more is this.  I have a computer dedicated to logging and digital.  I’ve told that computer to “Remember”
my credentials for QRZ.  But every now and then it forgets something and I have to manually log into QRZ again.  That doesn’t happen real often.  Not even monthly.  But even once is more than I intended.  I use strange passwords, and I don’t trust password management programs, so when it does this I have to look it up every time.

 

I’ll leave you with this.  To err is human….. but to really foul things up takes a computer.

 

Have a SUPER day.

 

Mike – KD5KC -- El Paso -- Texas.

 

The canyons are calling, colorful and deep.  But I have promises to keep.

And miles to go still in my Jeep...   And miles to go still in my Jeep...

 

Big Bend JEEP Rear

 

ADVENTURE:  The respectful pursuit of trouble.

 

 

 

 

From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of Paul Rasp
Sent: Tuesday, September 17, 2019 4:10 AM
To: N3FJPSoftwareUsers@groups.io
Subject: [N3FJPSoftwareUsers] QRZ Error Message

 


Scott,

Is this error as a result of my computer going to "sleep"


"There was an error accessing the QRZ internet database. Session Timeout."

Or is there some other explanation?

73
Paul
W4ARK

 


 


 


 


Re: QRZ Error Message

Pat Whelton
 

Thank you Dean for taking the time to comment on QRZ’d problem and then reminding us that it doesn’t belong here.
 
Pat - KZ5J
 

Sent: Tuesday, September 17, 2019 12:16 PM
Subject: Re: [N3FJPSoftwareUsers] QRZ Error Message
 
Has anyone bothered to ask the QRZ folks about this? It could be something they have set up as their security. I have never seen an online account that does not time out after a period of inactivity. Something that clearly has nothing to do with Scott's software is getting a lot of time on here.


Dean, KC9EOQ
 
On Tue, Sep 17, 2019 at 8:00 AM Pat Whelton <pwhelton@...> wrote:
Sorry my tracking is not that detailed.  It’s just frustrating when you’re in a hurry and you want to look up QSL info on a rare one and QRZ won’t give you the address until you log on.  You then log on and figure that’s the end of it but a couple of days later you have to logon again.
 
Pat - KZ5J
 
Sent: Tuesday, September 17, 2019 7:55 AM
Subject: Re: [N3FJPSoftwareUsers] QRZ Error Message
 

Good morning Pat.

 

Have you noticed or can you look back and see how long it was since the previous entry when this happened?  That just might be interesting to know.  I suspect it is something like 12 hours, but I don’t think I’ve ever experienced it twice on one day, so my log wouldn’t show something like that.

 

Have a GREAT day sir.

 

Vy73 - Mike - KD5KC.

El Paso, Texas - DM61rt.

SOTA W5T-Texas Association Manager.

NA-SOTA info is at:  http://na-sota.org/

 

 

 

From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of Pat Whelton
Sent: Tuesday, September 17, 2019 6:48 AM
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] QRZ Error Message

 

Glad I’m not the only one having problems with QRZ.   My issue is I have to log on to QRZ more often than I would like.  I can understand being forced to logon maybe twice a year but more than that is a pain in the a**.  I’ve been keeping track of it and here is my experience in the last two months:

 

QRZ Login

=========

8/06/19 – Twice

8/23/19

9/11/19

9/14/19

9/15/19 – Twice

 

A little much in my opinion.

 

Also I my subscription is paid up unitl 5/31/2020 and I really don’t use QRZ all that much.

 

Regards,

 

Pat - KZ5J

 

Sent: Tuesday, September 17, 2019 7:30 AM

Subject: Re: [N3FJPSoftwareUsers] QRZ Error Message

 

Morning Paul.

 

I get the same error.  I am not certain if the computer going to sleep has as much to do with it as the time elapsed since the last QRZ database access.  I get this error early in the morning after sleeping all night, but I sometimes get it after logging the local 80m guys at 5-am, then late in the afternoon making another contact.  It seems if I make several contacts spread through-out the day (like SOTA chasing) that the database is “kept alive” by the periodic use.  The computer often goes to sleep between entries, but the error only appears after a prolonged sleep.  I’ve not bothered to try to time it.

 

What frustrates me more is this.  I have a computer dedicated to logging and digital.  I’ve told that computer to “Remember”
my credentials for QRZ.  But every now and then it forgets something and I have to manually log into QRZ again.  That doesn’t happen real often.  Not even monthly.  But even once is more than I intended.  I use strange passwords, and I don’t trust password management programs, so when it does this I have to look it up every time.

 

I’ll leave you with this.  To err is human….. but to really foul things up takes a computer.

 

Have a SUPER day.

 

Mike – KD5KC -- El Paso -- Texas.

 

The canyons are calling, colorful and deep.  But I have promises to keep.

And miles to go still in my Jeep...   And miles to go still in my Jeep...

 

Big Bend JEEP Rear

 

ADVENTURE:  The respectful pursuit of trouble.

 

 

 

 

From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of Paul Rasp
Sent: Tuesday, September 17, 2019 4:10 AM
To: N3FJPSoftwareUsers@groups.io
Subject: [N3FJPSoftwareUsers] QRZ Error Message

 


Scott,

Is this error as a result of my computer going to "sleep"


"There was an error accessing the QRZ internet database. Session Timeout."

Or is there some other explanation?

73
Paul
W4ARK


Re: QRZ Error Message

Dean Holste
 

Has anyone bothered to ask the QRZ folks about this? It could be something they have set up as their security. I have never seen an online account that does not time out after a period of inactivity. Something that clearly has nothing to do with Scott's software is getting a lot of time on here.


Dean, KC9EOQ


On Tue, Sep 17, 2019 at 8:00 AM Pat Whelton <pwhelton@...> wrote:
Sorry my tracking is not that detailed.  It’s just frustrating when you’re in a hurry and you want to look up QSL info on a rare one and QRZ won’t give you the address until you log on.  You then log on and figure that’s the end of it but a couple of days later you have to logon again.
 
Pat - KZ5J
 
Sent: Tuesday, September 17, 2019 7:55 AM
Subject: Re: [N3FJPSoftwareUsers] QRZ Error Message
 

Good morning Pat.

 

Have you noticed or can you look back and see how long it was since the previous entry when this happened?  That just might be interesting to know.  I suspect it is something like 12 hours, but I don’t think I’ve ever experienced it twice on one day, so my log wouldn’t show something like that.

 

Have a GREAT day sir.

 

Vy73 - Mike - KD5KC.

El Paso, Texas - DM61rt.

SOTA W5T-Texas Association Manager.

NA-SOTA info is at:  http://na-sota.org/

 

 

 

From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of Pat Whelton
Sent: Tuesday, September 17, 2019 6:48 AM
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] QRZ Error Message

 

Glad I’m not the only one having problems with QRZ.   My issue is I have to log on to QRZ more often than I would like.  I can understand being forced to logon maybe twice a year but more than that is a pain in the a**.  I’ve been keeping track of it and here is my experience in the last two months:

 

QRZ Login

=========

8/06/19 – Twice

8/23/19

9/11/19

9/14/19

9/15/19 – Twice

 

A little much in my opinion.

 

Also I my subscription is paid up unitl 5/31/2020 and I really don’t use QRZ all that much.

 

Regards,

 

Pat - KZ5J

 

Sent: Tuesday, September 17, 2019 7:30 AM

Subject: Re: [N3FJPSoftwareUsers] QRZ Error Message

 

Morning Paul.

 

I get the same error.  I am not certain if the computer going to sleep has as much to do with it as the time elapsed since the last QRZ database access.  I get this error early in the morning after sleeping all night, but I sometimes get it after logging the local 80m guys at 5-am, then late in the afternoon making another contact.  It seems if I make several contacts spread through-out the day (like SOTA chasing) that the database is “kept alive” by the periodic use.  The computer often goes to sleep between entries, but the error only appears after a prolonged sleep.  I’ve not bothered to try to time it.

 

What frustrates me more is this.  I have a computer dedicated to logging and digital.  I’ve told that computer to “Remember”
my credentials for QRZ.  But every now and then it forgets something and I have to manually log into QRZ again.  That doesn’t happen real often.  Not even monthly.  But even once is more than I intended.  I use strange passwords, and I don’t trust password management programs, so when it does this I have to look it up every time.

 

I’ll leave you with this.  To err is human….. but to really foul things up takes a computer.

 

Have a SUPER day.

 

Mike – KD5KC -- El Paso -- Texas.

 

The canyons are calling, colorful and deep.  But I have promises to keep.

And miles to go still in my Jeep...   And miles to go still in my Jeep...

 

Big Bend JEEP Rear

 

ADVENTURE:  The respectful pursuit of trouble.

 

 

 

 

From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of Paul Rasp
Sent: Tuesday, September 17, 2019 4:10 AM
To: N3FJPSoftwareUsers@groups.io
Subject: [N3FJPSoftwareUsers] QRZ Error Message

 


Scott,

Is this error as a result of my computer going to "sleep"


"There was an error accessing the QRZ internet database. Session Timeout."

Or is there some other explanation?

73
Paul
W4ARK


Re: Duplicates

George Davenport
 

Another way you can try is to search do a search for the dupes if you have any info on the QSO in question. I usually search for callsign but you can search by date, band, mode, time, location and other fields. Once I locate the dupe, I just highlight it and delete.


Re: QRZ Error Message

Pat Whelton
 

Sorry my tracking is not that detailed.  It’s just frustrating when you’re in a hurry and you want to look up QSL info on a rare one and QRZ won’t give you the address until you log on.  You then log on and figure that’s the end of it but a couple of days later you have to logon again.
 
Pat - KZ5J
 

Sent: Tuesday, September 17, 2019 7:55 AM
Subject: Re: [N3FJPSoftwareUsers] QRZ Error Message
 

Good morning Pat.

 

Have you noticed or can you look back and see how long it was since the previous entry when this happened?  That just might be interesting to know.  I suspect it is something like 12 hours, but I don’t think I’ve ever experienced it twice on one day, so my log wouldn’t show something like that.

 

Have a GREAT day sir.

 

Vy73 - Mike - KD5KC.

El Paso, Texas - DM61rt.

SOTA W5T-Texas Association Manager.

NA-SOTA info is at:  http://na-sota.org/

 

 

 

From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of Pat Whelton
Sent: Tuesday, September 17, 2019 6:48 AM
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] QRZ Error Message

 

Glad I’m not the only one having problems with QRZ.   My issue is I have to log on to QRZ more often than I would like.  I can understand being forced to logon maybe twice a year but more than that is a pain in the a**.  I’ve been keeping track of it and here is my experience in the last two months:

 

QRZ Login

=========

8/06/19 – Twice

8/23/19

9/11/19

9/14/19

9/15/19 – Twice

 

A little much in my opinion.

 

Also I my subscription is paid up unitl 5/31/2020 and I really don’t use QRZ all that much.

 

Regards,

 

Pat - KZ5J

 

Sent: Tuesday, September 17, 2019 7:30 AM

Subject: Re: [N3FJPSoftwareUsers] QRZ Error Message

 

Morning Paul.

 

I get the same error.  I am not certain if the computer going to sleep has as much to do with it as the time elapsed since the last QRZ database access.  I get this error early in the morning after sleeping all night, but I sometimes get it after logging the local 80m guys at 5-am, then late in the afternoon making another contact.  It seems if I make several contacts spread through-out the day (like SOTA chasing) that the database is “kept alive” by the periodic use.  The computer often goes to sleep between entries, but the error only appears after a prolonged sleep.  I’ve not bothered to try to time it.

 

What frustrates me more is this.  I have a computer dedicated to logging and digital.  I’ve told that computer to “Remember”
my credentials for QRZ.  But every now and then it forgets something and I have to manually log into QRZ again.  That doesn’t happen real often.  Not even monthly.  But even once is more than I intended.  I use strange passwords, and I don’t trust password management programs, so when it does this I have to look it up every time.

 

I’ll leave you with this.  To err is human….. but to really foul things up takes a computer.

 

Have a SUPER day.

 

Mike – KD5KC -- El Paso -- Texas.

 

The canyons are calling, colorful and deep.  But I have promises to keep.

And miles to go still in my Jeep...   And miles to go still in my Jeep...

 

Big Bend JEEP Rear

 

ADVENTURE:  The respectful pursuit of trouble.

 

 

 

 

From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of Paul Rasp
Sent: Tuesday, September 17, 2019 4:10 AM
To: N3FJPSoftwareUsers@groups.io
Subject: [N3FJPSoftwareUsers] QRZ Error Message

 


Scott,

Is this error as a result of my computer going to "sleep"


"There was an error accessing the QRZ internet database. Session Timeout."

Or is there some other explanation?

73
Paul
W4ARK


Re: QRZ Error Message

Mike Olbrisch
 

Good morning Pat.

 

Have you noticed or can you look back and see how long it was since the previous entry when this happened?  That just might be interesting to know.  I suspect it is something like 12 hours, but I don’t think I’ve ever experienced it twice on one day, so my log wouldn’t show something like that.

 

Have a GREAT day sir.

 

Vy73 - Mike - KD5KC.

El Paso, Texas - DM61rt.

SOTA W5T-Texas Association Manager.

NA-SOTA info is at:  http://na-sota.org/

 

 

 

From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of Pat Whelton
Sent: Tuesday, September 17, 2019 6:48 AM
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] QRZ Error Message

 

Glad I’m not the only one having problems with QRZ.   My issue is I have to log on to QRZ more often than I would like.  I can understand being forced to logon maybe twice a year but more than that is a pain in the a**.  I’ve been keeping track of it and here is my experience in the last two months:

 

QRZ Login

=========

8/06/19 – Twice

8/23/19

9/11/19

9/14/19

9/15/19 – Twice

 

A little much in my opinion.

 

Also I my subscription is paid up unitl 5/31/2020 and I really don’t use QRZ all that much.

 

Regards,

 

Pat - KZ5J

 

Sent: Tuesday, September 17, 2019 7:30 AM

Subject: Re: [N3FJPSoftwareUsers] QRZ Error Message

 

Morning Paul.

 

I get the same error.  I am not certain if the computer going to sleep has as much to do with it as the time elapsed since the last QRZ database access.  I get this error early in the morning after sleeping all night, but I sometimes get it after logging the local 80m guys at 5-am, then late in the afternoon making another contact.  It seems if I make several contacts spread through-out the day (like SOTA chasing) that the database is “kept alive” by the periodic use.  The computer often goes to sleep between entries, but the error only appears after a prolonged sleep.  I’ve not bothered to try to time it.

 

What frustrates me more is this.  I have a computer dedicated to logging and digital.  I’ve told that computer to “Remember”
my credentials for QRZ.  But every now and then it forgets something and I have to manually log into QRZ again.  That doesn’t happen real often.  Not even monthly.  But even once is more than I intended.  I use strange passwords, and I don’t trust password management programs, so when it does this I have to look it up every time.

 

I’ll leave you with this.  To err is human….. but to really foul things up takes a computer.

 

Have a SUPER day.

 

Mike – KD5KC -- El Paso -- Texas.

 

The canyons are calling, colorful and deep.  But I have promises to keep.

And miles to go still in my Jeep...   And miles to go still in my Jeep...

 

Big Bend JEEP Rear

 

ADVENTURE:  The respectful pursuit of trouble.

 

 

 

 

From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of Paul Rasp
Sent: Tuesday, September 17, 2019 4:10 AM
To: N3FJPSoftwareUsers@groups.io
Subject: [N3FJPSoftwareUsers] QRZ Error Message

 


Scott,

Is this error as a result of my computer going to "sleep"


"There was an error accessing the QRZ internet database. Session Timeout."

Or is there some other explanation?

73
Paul
W4ARK


Re: QRZ Error Message

Pat Whelton
 

Glad I’m not the only one having problems with QRZ.   My issue is I have to log on to QRZ more often than I would like.  I can understand being forced to logon maybe twice a year but more than that is a pain in the a**.  I’ve been keeping track of it and here is my experience in the last two months:
 
QRZ Login
=========
8/06/19 – Twice
8/23/19
9/11/19
9/14/19
9/15/19 – Twice
 
A little much in my opinion.
 
Also I my subscription is paid up unitl 5/31/2020 and I really don’t use QRZ all that much.
 
Regards,
 
Pat - KZ5J
 

Sent: Tuesday, September 17, 2019 7:30 AM
Subject: Re: [N3FJPSoftwareUsers] QRZ Error Message
 

Morning Paul.

 

I get the same error.  I am not certain if the computer going to sleep has as much to do with it as the time elapsed since the last QRZ database access.  I get this error early in the morning after sleeping all night, but I sometimes get it after logging the local 80m guys at 5-am, then late in the afternoon making another contact.  It seems if I make several contacts spread through-out the day (like SOTA chasing) that the database is “kept alive” by the periodic use.  The computer often goes to sleep between entries, but the error only appears after a prolonged sleep.  I’ve not bothered to try to time it.

 

What frustrates me more is this.  I have a computer dedicated to logging and digital.  I’ve told that computer to “Remember”
my credentials for QRZ.  But every now and then it forgets something and I have to manually log into QRZ again.  That doesn’t happen real often.  Not even monthly.  But even once is more than I intended.  I use strange passwords, and I don’t trust password management programs, so when it does this I have to look it up every time.

 

I’ll leave you with this.  To err is human….. but to really foul things up takes a computer.

 

Have a SUPER day.

 

Mike – KD5KC -- El Paso -- Texas.

 

The canyons are calling, colorful and deep.  But I have promises to keep.

And miles to go still in my Jeep...   And miles to go still in my Jeep...

 

Big Bend JEEP Rear

 

ADVENTURE:  The respectful pursuit of trouble.

 

 

 

 

From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of Paul Rasp
Sent: Tuesday, September 17, 2019 4:10 AM
To: N3FJPSoftwareUsers@groups.io
Subject: [N3FJPSoftwareUsers] QRZ Error Message

 


Scott,

Is this error as a result of my computer going to "sleep"


"There was an error accessing the QRZ internet database. Session Timeout."

Or is there some other explanation?

73
Paul
W4ARK


Re: QRZ Error Message

Larry Banks
 

Hi Paul,
 
This happens to me often if I am not actively using JTAlert to make Qs.  Just clear and click the station again and it will reset.  I think it’s the polling of QRZ that has timed out –  my computer does not go to sleep so that is not the cause in my case.

73 -- Larry -- W1DYJ

 

From: Paul Rasp
Sent: Tuesday, September 17, 2019 6:10
Subject: [N3FJPSoftwareUsers] QRZ Error Message
 

Scott,

Is this error as a result of my computer going to "sleep"


"There was an error accessing the QRZ internet database. Session Timeout."

Or is there some other explanation?

73
Paul
W4ARK


Re: QRZ Error Message

Mike Olbrisch
 

Morning Paul.

 

I get the same error.  I am not certain if the computer going to sleep has as much to do with it as the time elapsed since the last QRZ database access.  I get this error early in the morning after sleeping all night, but I sometimes get it after logging the local 80m guys at 5-am, then late in the afternoon making another contact.  It seems if I make several contacts spread through-out the day (like SOTA chasing) that the database is “kept alive” by the periodic use.  The computer often goes to sleep between entries, but the error only appears after a prolonged sleep.  I’ve not bothered to try to time it.

 

What frustrates me more is this.  I have a computer dedicated to logging and digital.  I’ve told that computer to “Remember”
my credentials for QRZ.  But every now and then it forgets something and I have to manually log into QRZ again.  That doesn’t happen real often.  Not even monthly.  But even once is more than I intended.  I use strange passwords, and I don’t trust password management programs, so when it does this I have to look it up every time.

 

I’ll leave you with this.  To err is human….. but to really foul things up takes a computer.

 

Have a SUPER day.

 

Mike – KD5KC -- El Paso -- Texas.

 

The canyons are calling, colorful and deep.  But I have promises to keep.

And miles to go still in my Jeep...   And miles to go still in my Jeep...

 

Big Bend JEEP Rear

 

ADVENTURE:  The respectful pursuit of trouble.

 

 

 

 

From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of Paul Rasp
Sent: Tuesday, September 17, 2019 4:10 AM
To: N3FJPSoftwareUsers@groups.io
Subject: [N3FJPSoftwareUsers] QRZ Error Message

 


Scott,

Is this error as a result of my computer going to "sleep"


"There was an error accessing the QRZ internet database. Session Timeout."

Or is there some other explanation?

73
Paul
W4ARK


Re: QRZ Error Message

Scott Davis
 

Hi Paul,

Thanks for your e-mail.  Possibly, but I believe QRZ also resets your key after a period of inactivity.  

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Paul Rasp <cerritas@...>
To: N3FJPSoftwareUsers <N3FJPSoftwareUsers@groups.io>
Sent: Tue, Sep 17, 2019 6:10 am
Subject: [N3FJPSoftwareUsers] QRZ Error Message


Scott,

Is this error as a result of my computer going to "sleep"


"There was an error accessing the QRZ internet database. Session Timeout."

Or is there some other explanation?

73
Paul
W4ARK


Re: QRZ Error Message

Lou Everett, Sr.
 

Internet burps every once and awhile.

Lou WA5LOU




On Tue, Sep 17, 2019 at 5:10 AM Paul Rasp <cerritas@...> wrote:

Scott,

Is this error as a result of my computer going to "sleep"


"There was an error accessing the QRZ internet database. Session Timeout."

Or is there some other explanation?

73
Paul
W4ARK


Re: Duplicates

Scott Davis
 

Hi Ron,

Thanks for your e-mail.  You can't pick and choose once you initiate the process.  If you have any doubts, be sure to back up your log before you proceed.

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Ron Pogue <ron.pogue@...>
To: N3FJPSoftwareUsers <N3FJPSoftwareUsers@groups.io>
Sent: Mon, Sep 16, 2019 4:10 pm
Subject: [N3FJPSoftwareUsers] Duplicates

How does the duplicate function work in the software?    When you press remove duplicates are you given an option to approve the removals?  Can you merge several duplicates? 

7781 - 7800 of 46152