Date   

Duplicates

Ron Pogue
 

How does the duplicate function work in the software?    When you press remove duplicates are you given an option to approve the removals?  Can you merge several duplicates? 


Re: Glitch in latest version

John Crist <johncrist5958@...>
 

Forget previous emails. User error.
Sorry about that.

On Sat, Sep 14, 2019 at 5:34 PM John Crist <johncrist5958@...> wrote:
Tried that and it didn’t work.

On Sat, Sep 14, 2019 at 5:32 PM Scott Davis via Groups.Io <SNKDavis=aol.com@groups.io> wrote:
Hi John,

Thanks for your e-mail.  No recent changes to form resizing.  To change the form size, set the window state so that it is normal state (not minimized or maximized) and drag the edge with your mouse.

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: John Crist <johncrist5958@...>
To: N3FJPSoftwareUsers <N3FJPSoftwareUsers@groups.io>
Sent: Sat, Sep 14, 2019 5:00 pm
Subject: [N3FJPSoftwareUsers] Glitch in latest version

The window shrink does not work. It will minimize and it will show a full window but nothing in between.

WD8AJD
John


Re: Glitch in latest version

John Crist <johncrist5958@...>
 

Tried that and it didn’t work.

On Sat, Sep 14, 2019 at 5:32 PM Scott Davis via Groups.Io <SNKDavis=aol.com@groups.io> wrote:
Hi John,

Thanks for your e-mail.  No recent changes to form resizing.  To change the form size, set the window state so that it is normal state (not minimized or maximized) and drag the edge with your mouse.

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: John Crist <johncrist5958@...>
To: N3FJPSoftwareUsers <N3FJPSoftwareUsers@groups.io>
Sent: Sat, Sep 14, 2019 5:00 pm
Subject: [N3FJPSoftwareUsers] Glitch in latest version

The window shrink does not work. It will minimize and it will show a full window but nothing in between.

WD8AJD
John


Re: Glitch in latest version

Scott Davis
 

Hi John,

Thanks for your e-mail.  No recent changes to form resizing.  To change the form size, set the window state so that it is normal state (not minimized or maximized) and drag the edge with your mouse.

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: John Crist <johncrist5958@...>
To: N3FJPSoftwareUsers <N3FJPSoftwareUsers@groups.io>
Sent: Sat, Sep 14, 2019 5:00 pm
Subject: [N3FJPSoftwareUsers] Glitch in latest version

The window shrink does not work. It will minimize and it will show a full window but nothing in between.

WD8AJD
John


Glitch in latest version

johncrist5958@...
 

The window shrink does not work. It will minimize and it will show a full window but nothing in between.

WD8AJD
John


Re: Power setting

Scott Davis
 

Hi Mel,

Thanks for your e-mail.  AC Log defaults to the power of the previous record.  If you don't want to record power at all, just enter your next QSO with the field blank and it will remain blank on subsequent records.  Otherwise, be sure to enter the correct power when you change power levels.


http://www.n3fjp.com/faq.html#q63

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Mel - N7GCO <teammel@...>
To: N3FJPSoftwareUsers <N3FJPSoftwareUsers@groups.io>
Sent: Sat, Sep 14, 2019 12:29 am
Subject: [N3FJPSoftwareUsers] Power setting

I have two questions:
1). How do you turn off the automatic power setting? I switch power levels all the time. Right now it just keeps putting one in automatically (1000 watts).
2) How do I change the power setting (or remove  it) on 100's of records? I honestly hadn't noticed it was doing this. Right now I have several hundred 30 meter contacts that have listed 1000 watts, when it should be 50-100 watts.
I have known how to do this in the past, but for the life of me I can't remember.


Re: Power setting

Mike Olbrisch
 

Use a free program called ADIF-Master, and block edit your records.

 

Sure, you can do it in notepad too.  But get one character wrong, delete a comma or miss a period, and your database is hosed.  ADIF-Master drives like Excel.

 

Mike – KD5KC -- El Paso -- Texas.

 

The canyons are calling, colorful and deep.  But I have promises to keep.

And miles to go still in my Jeep...   And miles to go still in my Jeep...

 

Big Bend JEEP Rear

 

ADVENTURE:  The respectful pursuit of trouble.

 

 

 

 

From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of Mel - N7GCO
Sent: Friday, September 13, 2019 22:29 PM
To: N3FJPSoftwareUsers@groups.io
Subject: [N3FJPSoftwareUsers] Power setting

 

I have two questions:
1). How do you turn off the automatic power setting? I switch power levels all the time. Right now it just keeps putting one in automatically (1000 watts).
2) How do I change the power setting (or remove  it) on 100's of records? I honestly hadn't noticed it was doing this. Right now I have several hundred 30 meter contacts that have listed 1000 watts, when it should be 50-100 watts.
I have known how to do this in the past, but for the life of me I can't remember.


Power setting

Mel - N7GCO - Cheney, WA
 

I have two questions:
1). How do you turn off the automatic power setting? I switch power levels all the time. Right now it just keeps putting one in automatically (1000 watts).
2) How do I change the power setting (or remove  it) on 100's of records? I honestly hadn't noticed it was doing this. Right now I have several hundred 30 meter contacts that have listed 1000 watts, when it should be 50-100 watts.
I have known how to do this in the past, but for the life of me I can't remember.


Re: Contest-Keyboard CW

K8TS
 

Have usb send at dtr and usb keying (cw) at rts

Dale K8TS

 

Sent from Mail for Windows 10

 

From: AI3KS
Sent: Friday, September 13, 2019 9:53 PM
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] Contest-Keyboard CW

 

Dale,

If you are using DTR/RTS did you enable those in the 7300 USB Send/Keying menu?

Steve, AI3KS

On 19/09/13 16:15, K8TS wrote:

HI Folks!

Am setting up TX QSO Party program.

Everything is set EXCEPT CW Transmit.

I can get everything working and use the test button, and I see the VVV de…. Message scrolling on the bottom of the window.

However it does not key the rig.  I am baffled.

I have Rig Interface on Com 10 and CW on Com 5

Rig is Icom 7300, Windows 10, using two cables, one to remote and the other to the serial interface.

Any help is appreciated.

TIA

Dale K8TS

 

Sent from Mail for Windows 10

 

 

 


Re: Contest-Keyboard CW

AI3KS
 

Dale,

If you are using DTR/RTS did you enable those in the 7300 USB Send/Keying menu?

Steve, AI3KS

On 19/09/13 16:15, K8TS wrote:

HI Folks!

Am setting up TX QSO Party program.

Everything is set EXCEPT CW Transmit.

I can get everything working and use the test button, and I see the VVV de…. Message scrolling on the bottom of the window.

However it does not key the rig.  I am baffled.

I have Rig Interface on Com 10 and CW on Com 5

Rig is Icom 7300, Windows 10, using two cables, one to remote and the other to the serial interface.

Any help is appreciated.

TIA

Dale K8TS

 

Sent from Mail for Windows 10

 



Contest-Keyboard CW

K8TS
 

HI Folks!

Am setting up TX QSO Party program.

Everything is set EXCEPT CW Transmit.

I can get everything working and use the test button, and I see the VVV de…. Message scrolling on the bottom of the window.

However it does not key the rig.  I am baffled.

I have Rig Interface on Com 10 and CW on Com 5

Rig is Icom 7300, Windows 10, using two cables, one to remote and the other to the serial interface.

Any help is appreciated.

TIA

Dale K8TS

 

Sent from Mail for Windows 10

 


Re: Changing the Fonts in ACLog

Scott Davis
 

Hi Bruce,

Thanks for your e-mail.  That feature is on the future projects list.


73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: BRUCE THOMPSON <ockmrzr@...>
To: N3FJPSoftwareUsers <N3FJPSoftwareUsers@groups.io>
Sent: Fri, Sep 13, 2019 12:48 pm
Subject: [N3FJPSoftwareUsers] Changing the Fonts in ACLog

How do you change the Font on the main form?  IE, Time, “Current” Log button, the drop-down menu headings at the top, etc.  I have been able to change the fonts for the contact entry windows and the logged area, but can’t see where to change the others noted.
 
73 de Bruce, N7TY
Yuma, AZ
 


Re: Checking all bands at the same time on awards page

Scott Davis
 

Hi Nickus,

Thanks for your e-mail.  Just leave the band field blank.

Enjoy!


73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Nickus de Vos <nickus.zr6jn@...>
To: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io>
Sent: Fri, Sep 13, 2019 12:45 pm
Subject: [N3FJPSoftwareUsers] Checking all bands at the same time on awards page

Hi all
How do you check all bands at the same time for countries etc. Worked on the awards page in AC Log? I recall reading somewhere or hearing from someone that it’s possible, but I don’t see a all band filter anywhere.
 
Nickus – ZR6JN
 
Sent from Mail for Windows 10
 


Changing the Fonts in ACLog

BRUCE THOMPSON
 

How do you change the Font on the main form?  IE, Time, “Current” Log button, the drop-down menu headings at the top, etc.  I have been able to change the fonts for the contact entry windows and the logged area, but can’t see where to change the others noted.

 

73 de Bruce, N7TY

Yuma, AZ

www.qsl.net/n7ty

 


Checking all bands at the same time on awards page

Nickus de Vos
 

Hi all

How do you check all bands at the same time for countries etc. Worked on the awards page in AC Log? I recall reading somewhere or hearing from someone that it’s possible, but I don’t see a all band filter anywhere.

 

Nickus – ZR6JN

 

Sent from Mail for Windows 10

 


Re: Setting UTC Time

Ralph Matthews <rondo47@...>
 

Thanks, Larry!

73, NA6D 

Sent via the Samsung Galaxy S9, an AT&T 5G Evolution capable smartphone

-------- Original message --------
From: "Larry Banks via Groups.Io" <larryb.w1dyj@...>
Date: 9/12/19 12:13 PM (GMT-08:00)
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] Setting UTC Time

Hi Ralph,
 
Your computer’s time synchronization does it.  Not in Scott’s software.

73 -- Larry -- W1DYJ

 
Sent: Thursday, September 12, 2019 12:53
Subject: [N3FJPSoftwareUsers] Setting UTC Time
 
Have looked through the Settings and cannot find how to set the UTC time, to accommodate Daylight/Standard time. Any help would be appreciated.
Ralph, NA6D


Re: Suggestion for importing ADIF files

HamApps Support (VK3AMA)
 

Scott,

FYI, if your using the standard .NET Dialog classes (based on the CommonDialog) to open files and directories, you can open to the last used directory without needing to write any path save/restore code. The standard Dialogs have a "RestoreDirectory" property which if set to true will open at the last user-accessed directory regardless of the path specified by the "InitialDirectory" property. I use it all the time, give it a try (it may not be available in the Framework version you code against).

de Laurie VK3AMA


Re: Setting UTC Time

Larry Banks
 

Hi Ralph,
 
Your computer’s time synchronization does it.  Not in Scott’s software.

73 -- Larry -- W1DYJ

 

Sent: Thursday, September 12, 2019 12:53
Subject: [N3FJPSoftwareUsers] Setting UTC Time
 
Have looked through the Settings and cannot find how to set the UTC time, to accommodate Daylight/Standard time. Any help would be appreciated.
Ralph, NA6D


Re: Setting UTC Time

Scott Davis
 

Hi Ralph,

Thanks for your e-mail.  The UTC time is read directly from your OS.  No calculation from local time is required.

Enjoy!


73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Ralph Matthews via Groups.Io <rondo47@...>
To: N3FJPSoftwareUsers <N3FJPSoftwareUsers@groups.io>
Sent: Thu, Sep 12, 2019 1:39 pm
Subject: [N3FJPSoftwareUsers] Setting UTC Time

Have looked through the Settings and cannot find how to set the UTC time, to accommodate Daylight/Standard time. Any help would be appreciated.
Ralph, NA6D


Re: Suggestion for importing ADIF files

Bert W0RSB <bert.w0rsb@...>
 

Great idea! That will certainly do until a feature is added to the software.
--
Bert - W0RSB
Saint Paul, MN

7821 - 7840 of 46171