|
Re: Request: additional display of DX info
Scott Davis
Hi Dave,
Thanks for your e-mail. I will give that some thought for the future.
You can always click View > Country List and then click the header to sort by country and see all the prefixes and other info for that country.
Thanks again!
Enjoy!
73, Scott
N3FJP
Serving the Amateur Radio community with contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...
-----Original Message-----
From: Dave <k4em@...> To: N3FJPSoftwareUsers <N3FJPSoftwareUsers@groups.io> Sent: Sun, Sep 1, 2019 8:45 am Subject: [N3FJPSoftwareUsers] Request: additional display of DX info When I select a Country from the pull down menu and then click on Country name. I get a nice summary of DX for that country. But I would also like to know the PREFIX of that Country in that Window. Could you add the PREFIX just to the right of the Country name at the top of the window? Maybe Short/Long path too? I'm trying minimize keystrokes and I think those two additions would help us Dxer's.
Dave k4em
|
|
|
|
Request: additional display of DX info
Dave
When I select a Country from the pull down menu and then click on Country name. I get a nice summary of DX for that country. But I would also like to know the PREFIX of that Country in that Window. Could you add the PREFIX just to the right of the Country name at the top of the window? Maybe Short/Long path too? I'm trying minimize keystrokes and I think those two additions would help us Dxer's.
Dave k4em
|
|
|
|
Hiram P. Maxim Celebration Now Underway!
Scott Davis
Hi All,
Just a reminder that the Hiram P. Maxim Celebration is now underway and runs for the next 9 days! The rules are here:
And the software is here:
This program is completely free, so please be sure to tell your friends to give it a try!
I hope to work you during the event!
Enjoy!
73, Scott
N3FJP
Serving the Amateur Radio community with contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...
|
|
|
|
Re: Contest Log
Scott Davis
Hi Larry,
Thanks for your e-mail. With all the other commitments I already have on my plate, the World Wide Digi Contest sponsors didn't announce their contest with sufficient lead time for me to support their 2019 event. Lord willing, I do plan to support it next year.
I'd like to operate X contest. The exchange is X. Which program should I use?
http://www.n3fjp.com/faq.html#q73
I'm sorry that I didn't have the answer you were looking for.
73, Scott
N3FJP
Serving the Amateur Radio community with contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...
-----Original Message-----
From: Larry Krist <larrykrist@...> To: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> Sent: Fri, Aug 30, 2019 9:39 pm Subject: [N3FJPSoftwareUsers] Contest Log Is there a contest log that can be used in this weekends WW-DIGI
contest? Looks like the CW VHF log may work?
Thanks,
Larry N8CWU
|
|
|
|
Re: HPMaxim issue with FLDigi
Scott Davis
Hi Lee,
Thanks for your e-mail. I'm sorry that you have run into trouble. I'd love to help, but I am by no means an FLDigi guru, so please post your question here:
https://groups.io/g/winfldigi/
Enjoy! 73, Scott
N3FJP
Serving the Amateur Radio community with contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...
-----Original Message-----
From: Lee Glassman via Groups.Io <leemanpa@...> To: N3FJPSoftwareUsers <N3FJPSoftwareUsers@groups.io> Sent: Fri, Aug 30, 2019 6:56 pm Subject: [N3FJPSoftwareUsers] HPMaxim issue with FLDigi Probably should have tested this b4, but.. Anyway, I open the FJP HPM Log, set it up correctly, API server on. Start FLDigi, choose n3fjp logging, click connect. Yellow diamodn does not light, but this is in data stream:
RCVD: <CMD><PROGRAMRESPONSE><PGM>N3FJP's Hiram P. Maxim Contest Log</PGM><VER>1.0</VER><APIVER>1.5</APIVER></CMD><crlf> SEND: <CMD><PROGRAM></CMD>SEND: <CMD><PROGRAM></CMD>RCVD Over and over again. When I try to choose the contest in FLDigi, I pull down the menu, choose a contest, and it stays there for a second then reverts back to NO CONTEST. When I do an exchange and <LOG>, it logs to the FLDigi log, but not to N3FJP. What am I missing here? Sorry I waited so long, Scott...
|
|
|
|
Re: Comment section of ACLog
wa3gm
Tnx larry Greg wa3gm Sent via the Samsung Galaxy S9+, an AT&T 5G Evolution smartphone
-------- Original message -------- From: Larry Krist <larrykrist@...> Date: 8/30/19 9:21 PM (GMT-05:00) To: N3FJPSoftwareUsers@groups.io Subject: Re: [N3FJPSoftwareUsers] Comment section of ACLog Got to wsjt File, settings, reporting and uncheck the box that says db reports to comments. That worked for me. Larry N8CWU On 8/30/2019 8:04 AM, wa3gm via Groups.Io wrote:
|
|
|
|
Contest Log
Is there a contest log that can be used in this weekends WW-DIGI
contest? Looks like the CW VHF log may work? Thanks, Larry N8CWU
|
|
|
|
Re: Comment section of ACLog
Got to wsjt File, settings, reporting and uncheck the box that says db reports to comments. That worked for me. Larry N8CWU
On 8/30/2019 8:04 AM, wa3gm via Groups.Io wrote:
|
|
|
|
HPMaxim issue with FLDigi
Probably should have tested this b4, but.. Anyway, I open the FJP HPM Log, set it up correctly, API server on. Start FLDigi, choose n3fjp logging, click connect. Yellow diamodn does not light, but this is in data stream:
RCVD: <CMD><PROGRAMRESPONSE><PGM>N3FJP's Hiram P. Maxim Contest Log</PGM><VER>1.0</VER><APIVER>1.5</APIVER></CMD><crlf> SEND: <CMD><PROGRAM></CMD>SEND: <CMD><PROGRAM></CMD>RCVD Over and over again. When I try to choose the contest in FLDigi, I pull down the menu, choose a contest, and it stays there for a second then reverts back to NO CONTEST. When I do an exchange and <LOG>, it logs to the FLDigi log, but not to N3FJP. What am I missing here? Sorry I waited so long, Scott...
|
|
|
|
Re: Useful DXCC map
Robert Epling <no3i@...>
unsubscribe
On Friday, August 30, 2019, 3:33:49 PM EDT, KC7QY <kc7qy@...> wrote:
Bo, A very useful and free tool mentioned on this reflector in the past is Club Log. Once you sign up you can upload your AC log and it will tell you which countries you have worked and/or confirmed on each band. It also provides an easy way to order QSLs via OQRS for those Dxpeditions and DXers that use it. Just keep it open in your browser and you can quickly decide if you need a particular country. Scott has included a very user friendly upload tool in AC Log as well. There is even an option on Club Log to list by DX prefix if you want. 73, Jim KC7QY
|
|
|
|
Re: Comment section of ACLog
wa3gm
Kevin Yep thst was it..... Thanks Greg Wa3gm Sent via the Samsung Galaxy S9+, an AT&T 5G Evolution smartphone
-------- Original message -------- From: Kevin Gray <notsome1else@...> Date: 8/30/19 4:29 PM (GMT-05:00) To: N3FJPSoftwareUsers@groups.io Subject: Re: [N3FJPSoftwareUsers] Comment section of ACLog It probably isn’t the settings in ACLog, it’s more than likely the settings in WSJT-X (you didn’t mention it, but I imagine you are using this). Go to File>Settings Then click on the “Reporting” Tab ( 5th one over) Under “Logging” look at the 4th check box down. Is it checked ??
73 Kevin N9VPV
From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of wa3gm via Groups.Io
Scott
I was hoping someone else in the group here would know what to do or have a resolution for this.....
On my other computer it logs the a call book name and address but on my other computer it puts the send and receive Signal report in the comment section.
If anyone has a resolution for this please let me know.
Tnx
Greg wa3gm
Sent via the Samsung Galaxy S9+, an AT&T 5G Evolution smartphone
-------- Original message -------- From: "Scott Davis via Groups.Io" <SNKDavis@...> Date: 8/30/19 8:31 AM (GMT-05:00) Subject: Re: [N3FJPSoftwareUsers] Comment section of ACLog
Hi Greg,
Thanks for your e-mail. AC Log will look up the data from previous QSOs (if you have the carry comments data forward option enabled) and QRZ (if enabled), but any data overwrites are handled by the connected program. AC Log has no control over that.
73, Scott N3FJP
Serving the Amateur Radio community with contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...
-----Original Message----- Hi Scott
When using JT Alert the comments section of AC Log puts in the signal report of the qso Instead of the name and address of the person.....
How do I get it to go back to putting the name and address and and not the both signal reports.
Thanks Greg wa3gm
Sent via the Samsung Galaxy S9+, an AT&T 5G Evolution smartphone
-------- Original message -------- From: "Scott Davis via Groups.Io" <SNKDavis@...> Date: 8/24/19 1:32 PM (GMT-05:00) Subject: Re: [N3FJPSoftwareUsers] Display Frequency
Hi Bill,
Thanks for your e-mail. Press Ctrl + Shift + F. More details are here:
Enjoy!
73, Scott N3FJP
Serving the Amateur Radio community with contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...
-----Original Message----- I'm working the Ohio QSO party and would like to show Frequency Worked of each station in the N3FJP Recent Contacts window. Not sure how to do that.
|
|
|
|
Re: Comment section of ACLog
Kevin Gray <notsome1else@...>
It probably isn’t the settings in ACLog, it’s more than likely the settings in WSJT-X (you didn’t mention it, but I imagine you are using this). Go to File>Settings Then click on the “Reporting” Tab ( 5th one over) Under “Logging” look at the 4th check box down. Is it checked ??
73 Kevin N9VPV
From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of wa3gm via Groups.Io
Sent: Friday, August 30, 2019 9:50 AM To: N3FJPSoftwareUsers@groups.io Subject: Re: [N3FJPSoftwareUsers] Comment section of ACLog
Scott
I was hoping someone else in the group here would know what to do or have a resolution for this.....
On my other computer it logs the a call book name and address but on my other computer it puts the send and receive Signal report in the comment section.
If anyone has a resolution for this please let me know.
Tnx
Greg wa3gm
Sent via the Samsung Galaxy S9+, an AT&T 5G Evolution smartphone
-------- Original message -------- From: "Scott Davis via Groups.Io" <SNKDavis@...> Date: 8/30/19 8:31 AM (GMT-05:00) Subject: Re: [N3FJPSoftwareUsers] Comment section of ACLog
Hi Greg,
Thanks for your e-mail. AC Log will look up the data from previous QSOs (if you have the carry comments data forward option enabled) and QRZ (if enabled), but any data overwrites are handled by the connected program. AC Log has no control over that.
73, Scott N3FJP
Serving the Amateur Radio community with contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...
-----Original Message----- Hi Scott
When using JT Alert the comments section of AC Log puts in the signal report of the qso Instead of the name and address of the person.....
How do I get it to go back to putting the name and address and and not the both signal reports.
Thanks Greg wa3gm
Sent via the Samsung Galaxy S9+, an AT&T 5G Evolution smartphone
-------- Original message -------- From: "Scott Davis via Groups.Io" <SNKDavis@...> Date: 8/24/19 1:32 PM (GMT-05:00) Subject: Re: [N3FJPSoftwareUsers] Display Frequency
Hi Bill,
Thanks for your e-mail. Press Ctrl + Shift + F. More details are here:
Enjoy!
73, Scott N3FJP
Serving the Amateur Radio community with contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...
-----Original Message----- I'm working the Ohio QSO party and would like to show Frequency Worked of each station in the N3FJP Recent Contacts window. Not sure how to do that.
|
|
|
|
Re: Issue with TQSL software path
Stephen Duncheskie
Thank you Scott for that link with the YouTube viewing. Went back through, and this time used the "pull-down" tab for the station location and discovered that there was a "common" inserted in the middle where there should not have been! Now we are up and running a GREAT product. Sincerely: Stephen
On Fri, Aug 30, 2019 at 1:38 PM Scott Davis via Groups.Io <SNKDavis=aol.com@groups.io> wrote:
|
|
|
|
Re: Useful DXCC map
KC7QY
Bo, A very useful and free tool mentioned on this reflector in the past is Club Log. Once you sign up you can upload your AC log and it will tell you which countries you have worked and/or confirmed on each band. It also provides an easy way to order QSLs via OQRS for those Dxpeditions and DXers that use it. Just keep it open in your browser and you can quickly decide if you need a particular country. Scott has included a very user friendly upload tool in AC Log as well. There is even an option on Club Log to list by DX prefix if you want. 73, Jim KC7QY
|
|
|
|
Re: Issue with TQSL software path
Scott Davis
Hi Stephen,
Thanks for your e-mail. Choosing your station location in AC Log (that you have properly configured in TQSL) as detailed here will get you going:
Enjoy!
73, Scott
N3FJP
Serving the Amateur Radio community with contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...
-----Original Message-----
From: Larry Banks via Groups.Io <larryb.w1dyj@...> To: N3FJPSoftwareUsers <N3FJPSoftwareUsers@groups.io> Sent: Fri, Aug 30, 2019 12:53 pm Subject: Re: [N3FJPSoftwareUsers] Issue with TQSL software path Hi Stephen,
From what I see from the message, you may not set up the locations in TQSL
correctly.
73 -- Larry -- W1DYJ From: Stephen Duncheskie
Sent: Friday, August 30, 2019 12:33
Subject: [N3FJPSoftwareUsers] Issue with TQSL software
path
Recently
replaced my computer and successfully installed ACLog and the TQSL software;
however I am receiving Command Syntax Error (10) as the selection location
cannot be found? (see attached screen shot) Yet when I go and open directly the
TQSL program, uploading the log is not an issue.....I am running LoTW Manager
1.9 and ACL 6.5
Sincerely: Stephen W4PPC
|
|
|
|
Re: two new issues
lewtho@...
Try uninstalling the driver and then reinstalling it without the radio attached. Then plug your cable into the USB port you want and turn on your radio. I heard that the driver bonds with the com port so it makes it difficult to change the com port once it is installed.
..
Lew Thomas
On Aug 30, 2019, 8:46 AM -0600, K4GM-George <k4gm@...>, wrote:
I tried changing the Silicon Labs driven COM 4 to another port number.
|
|
|
|
Re: Useful DXCC map
Charles C <charles.cromer@...>
JT Alert will do all of that for you and FAR more! -- Charles Cromer
On Fri, Aug 30, 2019 at 11:53 AM Bo Barry <bobarr@...> wrote: This old timer can't keep track of the prefixes anymore! Way beyond my memory, compared to 1954!'
|
|
|
|
Re: Useful DXCC map
James Ewer
Your probably going to have to pay for something. Lists of DXCC entities are available for free. ARRL and RGSB both sell wallhangers 24 X 36. ARRL wants 15 bucks plus shipping. It is laminated and comes in a nice cardboard tube. I have one on my wall next to the rig. Yaesu did give something out with new hf rigs but I dont know if they sell them. Quite large. But you need that there are a lot of prefixes and dxcc entities. Jim AC8AZ
On Friday, August 30, 2019, 12:53:26 PM EDT, Bo Barry <bobarr@...> wrote:
This old timer can't keep track of the prefixes anymore! Way beyond my memory, compared to 1954!' I'm looking for some printable & readable 8x10 maps (regional) that I can 'color in' as I confirm the countries. Better yet, some interactive one for my PC that I can fill in and easily spot the needed countries. I don't have a clue of my remaining countries in Europe or Africa. I wish I hadn't lost my programming skills. I could easily do this in yesteryear Thanks Bo W4GHV since '54
|
|
|
|
Re: Issue with TQSL software path
Hi Stephen,
From what I see from the message, you may not set up the locations in TQSL
correctly.
73 -- Larry -- W1DYJ
From: Stephen Duncheskie
Sent: Friday, August 30, 2019 12:33
Subject: [N3FJPSoftwareUsers] Issue with TQSL software
path Recently
replaced my computer and successfully installed ACLog and the TQSL software;
however I am receiving Command Syntax Error (10) as the selection location
cannot be found? (see attached screen shot) Yet when I go and open directly the
TQSL program, uploading the log is not an issue.....I am running LoTW Manager
1.9 and ACL 6.5 Sincerely: Stephen W4PPC
|
|
|
|
Useful DXCC map
Bo Barry <bobarr@...>
This old timer can't keep track of the prefixes anymore! Way beyond my memory, compared to 1954!'
I'm looking for some printable & readable 8x10 maps (regional) that I can 'color in' as I confirm the countries. Better yet, some interactive one for my PC that I can fill in and easily spot the needed countries. I don't have a clue of my remaining countries in Europe or Africa. I wish I hadn't lost my programming skills. I could easily do this in yesteryear Thanks Bo W4GHV since '54
|
|
|
