Date   

Re: Field Day Question

Scott Davis
 

Hi Dennis,

Thanks for your e-mail.  When configured properly, all will automatically populate.  Laurie's note follows (JTAlert author):

JTAlert supports [these contest programs], but you can't just substitute ACLog with FDLog, it will never work. There are WSJT-X, FDLog & JTAlert settings that need to be configured. Setup is not difficult and easily done, but without reading the specific Help Topic on this, I can guarantee your failure.

See the "Tutorials -> N3FJP Contest Logs Logging" topic in the JTAlert Help file.

de Laurie VK3AMA


More details here:



Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Dennis <dennis@...>
To: N3FJPSoftwareUsers <N3FJPSoftwareUsers@groups.io>
Sent: Sun, Jun 23, 2019 3:31 pm
Subject: [N3FJPSoftwareUsers] Field Day Question

When using ACL with Jtalert and wsjt-x for Field Day, the Class and Section fields did not populate automatically. Is this proper or have I not set up properly.

Regards,
Dennis
W7DRW


N3FJP FIELD DAY CONTACT CONTACT LOG UPLOAD TO ARRL

mathisfun.bob@...
 

Our club logged all our Field Day contacts into N3FJP Field logging software on two computers. Is there a video, uTube, that tells how to combine the files from the two computers onto one file ... then send it on to ARRL


Field Day Question

Dennis
 

When using ACL with Jtalert and wsjt-x for Field Day, the Class and Section fields did not populate automatically. Is this proper or have I not set up properly.

Regards,
Dennis
W7DRW


Re: FD Log Station Address Question

Scott Davis
 

Hi Ken,

Thanks for your e-mail.  Don't use Cabrillo for Field Day submission.  Instead, use these steps here:


http://www.n3fjp.com/faq.html#q68

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Kenneth W. Campbell <n6pcd1@...>
To: N3FJPSoftwareUsers <N3FJPSoftwareUsers@groups.io>
Sent: Sun, Jun 23, 2019 2:56 pm
Subject: [N3FJPSoftwareUsers] FD Log Station Address Question

Hi all,

I ran my Field Day station from Missouri this year using the N3FJP Field Day Contest Log, and am wondering if I should use the actual address of the residence where I operated in Missouri, or use my home station address in California when clicking Write Cabrillo File on the File menu?

Thanks for the clarification!
--
All the best,
Ken N6PCD


Re: Field Day Fiasco

Rusty Plocheck <we5txs@...>
 

On 6/23/2019 1:58 PM, Rusty Plocheck wrote:

Did that. Still won''t populate anything.

On 6/23/2019 1:07 PM, Scott Davis via Groups.Io wrote:
Hi Russell,

Thanks for your e-mail.  I'm sorry that you ran into trouble.  If you haven't already, please take a look at these steps here:


If you continue to have trouble, you'll need to provide the group a lot more detail for us to help you, but with enough information, we will do our best (your settings, what specifically is occurring, etc.).

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: we5txs <we5txs@...>
To: N3FJPSoftwareUsers <N3FJPSoftwareUsers@groups.io>
Sent: Sun, Jun 23, 2019 11:48 am
Subject: [N3FJPSoftwareUsers] Field Day Fiasco

Where should I start? I have gotten my IC-7300 to work with WSJT-X and JTAlert but cannot for the life of me get JTAlert to automatically log to the field day program OR to the regular log program. Followed the instructions to connect JTAlert and the logging program but to no avail.I have searched Youtube and watched several videos and followed their instructions, still nothing.

Mind you I am not the brightest light bulb in the box but I can follow instructions..... If I can set up LOTW and HRD, I certainly should be able to set AClog to work. Anyone have any ideas to assist??
-- 
Rusty Plocheck, WE5TXS
ARRL West Texas Traffic Manager
ARRL West Texas Assistant Section Emergency Coordinator
Texas Traffic Net Manager 
-- 
Rusty Plocheck, WE5TXS
ARRL West Texas Traffic Manager
ARRL West Texas Assistant Section Emergency Coordinator
Texas Traffic Net Manager 


Re: Field Day Fiasco

we5txs@...
 

Did that. Still won''t populate anything.

On 6/23/2019 1:07 PM, Scott Davis via Groups.Io wrote:
Hi Russell,

Thanks for your e-mail.  I'm sorry that you ran into trouble.  If you haven't already, please take a look at these steps here:


If you continue to have trouble, you'll need to provide the group a lot more detail for us to help you, but with enough information, we will do our best (your settings, what specifically is occurring, etc.).

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: we5txs <we5txs@...>
To: N3FJPSoftwareUsers <N3FJPSoftwareUsers@groups.io>
Sent: Sun, Jun 23, 2019 11:48 am
Subject: [N3FJPSoftwareUsers] Field Day Fiasco

Where should I start? I have gotten my IC-7300 to work with WSJT-X and JTAlert but cannot for the life of me get JTAlert to automatically log to the field day program OR to the regular log program. Followed the instructions to connect JTAlert and the logging program but to no avail.I have searched Youtube and watched several videos and followed their instructions, still nothing.

Mind you I am not the brightest light bulb in the box but I can follow instructions..... If I can set up LOTW and HRD, I certainly should be able to set AClog to work. Anyone have any ideas to assist??
-- 
Rusty Plocheck, WE5TXS
ARRL West Texas Traffic Manager
ARRL West Texas Assistant Section Emergency Coordinator
Texas Traffic Net Manager 


FD Log Station Address Question

Kenneth W. Campbell
 

Hi all,

I ran my Field Day station from Missouri this year using the N3FJP Field Day Contest Log, and am wondering if I should use the actual address of the residence where I operated in Missouri, or use my home station address in California when clicking Write Cabrillo File on the File menu?

Thanks for the clarification!
--
All the best,
Ken N6PCD


Re: Field Day Fiasco

Scott Davis
 

Hi Russell,

Thanks for your e-mail.  I'm sorry that you ran into trouble.  If you haven't already, please take a look at these steps here:


If you continue to have trouble, you'll need to provide the group a lot more detail for us to help you, but with enough information, we will do our best (your settings, what specifically is occurring, etc.).

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: we5txs <we5txs@...>
To: N3FJPSoftwareUsers <N3FJPSoftwareUsers@groups.io>
Sent: Sun, Jun 23, 2019 11:48 am
Subject: [N3FJPSoftwareUsers] Field Day Fiasco

Where should I start? I have gotten my IC-7300 to work with WSJT-X and JTAlert but cannot for the life of me get JTAlert to automatically log to the field day program OR to the regular log program. Followed the instructions to connect JTAlert and the logging program but to no avail.I have searched Youtube and watched several videos and followed their instructions, still nothing.

Mind you I am not the brightest light bulb in the box but I can follow instructions..... If I can set up LOTW and HRD, I certainly should be able to set AClog to work. Anyone have any ideas to assist??


Re: Duplicates when uploading to LoTW

Scott Davis
 

Hi Nickus,

Thanks for your e-mail  More details here:


http://www.n3fjp.com/faq.html#q71

Enjoy!

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Jim Shorney <jshorney@...>
To: N3FJPSoftwareUsers <N3FJPSoftwareUsers@groups.io>
Sent: Sun, Jun 23, 2019 1:49 pm
Subject: Re: [N3FJPSoftwareUsers] Duplicates when uploading to LoTW


Download "All Since..."

73

-Jim
NU0C

On Sun, 23 Jun 2019 19:28:32 +0200
"Nickus de Vos" <nickus.zr6jn@...> wrote:

> Hi
> I'm sure this has been answered before but I can not find it.
> Why do I get a warning about duplicate QSO's each time when uploading
> to LoTW? It's as if AC Log doesn't keep track of the QSO's it already
> uploaded to LoTW in the past.
>
> Thanks
>
> Nickus - ZR6JN
>
>
>





Re: Duplicates when uploading to LoTW

Jim Shorney
 

Download "All Since..."

73

-Jim
NU0C

On Sun, 23 Jun 2019 19:28:32 +0200
"Nickus de Vos" <nickus.zr6jn@...> wrote:

Hi
I'm sure this has been answered before but I can not find it.
Why do I get a warning about duplicate QSO's each time when uploading
to LoTW? It's as if AC Log doesn't keep track of the QSO's it already
uploaded to LoTW in the past.

Thanks

Nickus - ZR6JN



Re: Duplicates when uploading to LoTW

David W Wood \(G3YXX\) <david.g3yxx@...>
 

Nick

Its because you are uploading the whole log, not those which have been logged since your last upload.

73

David - G3YXX

-----Original Message-----
From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of Nickus de Vos
Sent: 23 June 2019 18:29
To: N3FJPSoftwareUsers@groups.io
Subject: [N3FJPSoftwareUsers] Duplicates when uploading to LoTW

Hi
I'm sure this has been answered before but I can not find it.
Why do I get a warning about duplicate QSO's each time when uploading to LoTW? It's as if AC Log doesn't keep track of the QSO's it already uploaded to LoTW in the past.

Thanks

Nickus - ZR6JN


Duplicates when uploading to LoTW

Nickus de Vos
 

Hi
I'm sure this has been answered before but I can not find it.
Why do I get a warning about duplicate QSO's each time when uploading
to LoTW? It's as if AC Log doesn't keep track of the QSO's it already
uploaded to LoTW in the past.

Thanks

Nickus - ZR6JN


Field Day Fiasco

we5txs@...
 

Where should I start? I have gotten my IC-7300 to work with WSJT-X and JTAlert but cannot for the life of me get JTAlert to automatically log to the field day program OR to the regular log program. Followed the instructions to connect JTAlert and the logging program but to no avail.I have searched Youtube and watched several videos and followed their instructions, still nothing.

Mind you I am not the brightest light bulb in the box but I can follow instructions..... If I can set up LOTW and HRD, I certainly should be able to set AClog to work. Anyone have any ideas to assist??


Re: stations appear on wifi but not when wired to node

KF5WGB <ralfvoepel@...>
 

Make sure the hardwired ones use the same subnet (if you are not using a dhcp server) and window$ Groupname
--
73 de KF5WGB

A2Q+ - ACLog to QRZ upload program:
https://groups.io/g/A2Q


Re: stations appear on wifi but not when wired to node

Hector Figueroa
 

If they are on different sinners, they may have difficulty seeing each other. 

Hector Figueroa 

On Jun 22, 2019, at 8:48 PM, Lee Lukehart - K7AVR <luke@...> wrote:

Some config facts:
 - all stations are using TCP (not File Share method) with Status/Chat enabled
 - when wired to a node, stations can run HamChat that is running on the N3FJP server's node
 - when wired to a node, stations can access internet via server nodes's gateway
 - a wifi mesh access point is wired to the server's node
 
 The puzzling part: 
 - stations that connect via wifi to that access point ARE visible to N3FJP
 - to restate the problem: stations that are hardwired to nodes ARE NOT visible to N3JFP
 
 Tested with no firewalls turned off; no difference.
 
I know folks are busy with Field Day, but it would be great to find a solution while we're all together. Thanks!


stations appear on wifi but not when wired to node

Lee Lukehart - K7AVR
 

Some config facts:
 - all stations are using TCP (not File Share method) with Status/Chat enabled
 - when wired to a node, stations can run HamChat that is running on the N3FJP server's node
 - when wired to a node, stations can access internet via server nodes's gateway
 - a wifi mesh access point is wired to the server's node
 
 The puzzling part: 
 - stations that connect via wifi to that access point ARE visible to N3FJP
 - to restate the problem: stations that are hardwired to nodes ARE NOT visible to N3JFP
 
 Tested with no firewalls turned off; no difference.
 
I know folks are busy with Field Day, but it would be great to find a solution while we're all together. Thanks!


Re: JT alert and N3FJP Logging question

Larry Krist
 

Changing the ip address in JTALERT to 127.0.0.1 seems to have solved the
problem.

Larry  N8CWU

On 6/22/2019 11:06 PM, Larry Krist wrote:
We are running the N3FJP Field Day logger 6.0 networked using TCP, with
5 stations. Some are running WSJT-X- FT8. The Database is on one of the
computers called FDSERVER. All the other computers are using the
database located on the computer named FDSERVER and for the most part,
the logging is working fine. The issue is that in the N3FJP Field day
software, each computer has an operator assigned which are all different.
 When the JT Alert posts the contact to the one named FDSERVER,the
operator and computer are logged as that computer name FDSERVER and the
operator logged into the FDSERVER computer at that time in the N3FJP Software. This does not happen when the call and report are entered manually on the other networked computers.
.
Is this normal, a bug in one or both the program, or operator error. Just wondering.

Thanks

Madison County Amateur Radio Club, London Ohio

Larry  - N8CWU






JT alert and N3FJP Logging question

Larry Krist
 

We are running the N3FJP Field Day logger 6.0 networked using TCP, with
5 stations. Some are running WSJT-X- FT8. The Database is on one of the
computers called FDSERVER. All the other computers are using the
database located on the computer named FDSERVER and for the most part,
the logging is working fine. The issue is that in the N3FJP Field day
software, each computer has an operator assigned which are all different.
 When the JT Alert posts the contact to the one named FDSERVER,the
operator and computer are logged as that computer name FDSERVER and the
operator logged into the FDSERVER computer at that time in the N3FJP Software. This does not happen when the call and report are entered manually on the other networked computers.
.
Is this normal, a bug in one or both the program, or operator error. Just wondering.

Thanks

Madison County Amateur Radio Club, London Ohio

Larry  - N8CWU


Re: Field Day 2019 - Home or On Site, Please Make Some Qs!

Keith
 

W4RPE here from Fort Pierce, Florida 

Keith Wood 
W4RPE





On Jun 22, 2019, at 6:19 PM, Jerry <jerseyj@...> wrote:

Delaware here, K3F, on 20 Meters.

Jerry
KB2GCG

- “Defeat lasts one day, giving up lasts a lifetime” (unknown author)

On Jun 22, 2019, at 4:35 PM, John Wilson <kc4lzn@...> wrote:

No, good on Texas... but tnx for the offer.

On Sat, Jun 22, 2019, 14:55 Mike Olbrisch <mike-2020@...> wrote:
Do you need Texas in any more?  Be glad to help, once I return from Strahlungen Germany.  LoTW capable here also.

Vy73 -- Mike -- DL/KD5KC
Rhon Mountains
Strahlungen Germany




On Sat, Jun 22, 2019 at 10:39 AM -0600, "John Wilson" <kc4lzn@...> wrote:

Let's do this! 13 away from a triple play!

73
John 
KC4LZN 
EL98DS 

On Sat, Jun 22, 2019, 11:13 Jerry <jerseyj@...> wrote:
K3F from Delawarean 


- "Defeat lasts one day, giving up lasts a lifetime."

On Jun 22, 2019, at 10:46 AM, Kenneth W. Campbell <n6pcd1@...> wrote:

Will be operating 1D from 0 land.
--
All the best,
Ken N6PCD


Re: Field Day 2019 - Home or On Site, Please Make Some Qs!

Jerry
 

Delaware here, K3F, on 20 Meters.

Jerry
KB2GCG

- “Defeat lasts one day, giving up lasts a lifetime” (unknown author)

On Jun 22, 2019, at 4:35 PM, John Wilson <kc4lzn@...> wrote:

No, good on Texas... but tnx for the offer.

On Sat, Jun 22, 2019, 14:55 Mike Olbrisch <mike-2020@...> wrote:
Do you need Texas in any more?  Be glad to help, once I return from Strahlungen Germany.  LoTW capable here also.

Vy73 -- Mike -- DL/KD5KC
Rhon Mountains
Strahlungen Germany




On Sat, Jun 22, 2019 at 10:39 AM -0600, "John Wilson" <kc4lzn@...> wrote:

Let's do this! 13 away from a triple play!

73
John 
KC4LZN 
EL98DS 

On Sat, Jun 22, 2019, 11:13 Jerry <jerseyj@...> wrote:
K3F from Delawarean 


- "Defeat lasts one day, giving up lasts a lifetime."

On Jun 22, 2019, at 10:46 AM, Kenneth W. Campbell <n6pcd1@...> wrote:

Will be operating 1D from 0 land.
--
All the best,
Ken N6PCD