|
lotw batch upload problem...additional info
Ed Healy <wa9mnf@...>
I forgot to mention that after I attempt a batch upload in LOTW, a window opens that says Error executing Shell function
The system cannot find the file specified. Thanks... Ed
|
|
|
|
lotw batch upload problem...
Ed Healy <wa9mnf@...>
Hi...
My hd crashed and am trying to put things back together. I use both LOTW and EQSL. If I upload only one call in LOTW everything appears to be fine and the color on the call sent changes to show it has been sent. When I select several calls to upload as a batch file in LOTW it shows that x amount of calls have been included in an .adi file. The color change to indicate it has been sent doesn't change. If I do a batch file in EQSL everything appears to be fine. I also don't know how to determine whether the .adi file has been sent. I'm sure I have something set up the wrong way and any suggestions are appreciated. Thanks... Ed WA9MNF
|
|
|
|
Re: LOTW Error on upload
It appears to originally upload but no "L" is being put in the "Sent Conf By" field in ACLOG
-- Frank - KB2MXV
|
|
|
|
LOTW Error on upload
All of the sudden I keep getting the following error everytime I try to upload my new QSO's to LOTW. The only way around it is to edit each record "Sent Conf By" from BE to LBE, then the upload goes.
-- Frank - KB2MXV
|
|
|
|
Re: Stuck in SSB mode
Dave
problem solved, under rig control I set rig to NONE. I do not control the radio with ACLog. Yesterday I did set rig to kenwood2 to check out my TS870.
Dave
|
|
|
|
Re: Stuck in SSB mode
Dave
I also noticed it's stuck in 30m as well, can't change band; and a couple of extra digits in the frequency field; 10.13600 instead of 10.136. I also can't change the frequency, say if I want to log a 10m qso. I have to go back and edit the qso to correct the issues.
|
|
|
|
Stuck in SSB mode
Dave
For some reason the log is defaulting to ssb mode. I start to log an ft8 call, I tab across change it to ft8, then tab across and it changes back to ssb. Then I have to edit the qso and change it to ft8. This started this morning.
Dave k4em
|
|
|
|
Re: LOTW issues?
Scott Davis
Hi Wayne,
toggle quoted messageShow quoted text
Thanks for your e-mail. Using the drop down arrow as detailed in Step 3 here to select your station location will get you going:
Enjoy! 73, Scott
N3FJP
Serving the Amateur Radio community with contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...
-----Original Message-----
From: Wayne N4GIL via Groups.Io <n4gil@...> To: N3FJPSoftwareUsers <N3FJPSoftwareUsers@groups.io> Sent: Thu, Apr 11, 2019 6:29 am Subject: Re: [N3FJPSoftwareUsers] LOTW issues? I have encountered an issue I cannot resolve with "LOTW uploads".
I'm getting: "Error: The selected station location could not be found. Final Status: Command Syntax Error (10)". I use (2) difference PC's with two different radios. TQSL is loaded on both computers and works well with one of them. Both LOTW Certificate(s) shows the same station location on each of the computers. Any ideas on how to resolve this issue? Note, I am absolutely sure that it is "user error". :) Thanks. N4GIL
|
|
|
|
Re: LOTW issues?
Wayne N4GIL
I have encountered an issue I cannot resolve with "LOTW uploads".
I'm getting: "Error: The selected station location could not be found. Final Status: Command Syntax Error (10)". I use (2) difference PC's with two different radios. TQSL is loaded on both computers and works well with one of them. Both LOTW Certificate(s) shows the same station location on each of the computers. Any ideas on how to resolve this issue? Note, I am absolutely sure that it is "user error". :) Thanks. N4GIL
|
|
|
|
Re: Club Log Uploader
Dan Trainor
That worked! Great... Now onto registering and setting up LoTW. That might be a bit more work :) Thanks Scott!
|
|
|
|
Re: Odd LOTW Return Message
Kevin Utzy
Gee all this time I never ran into it before. Very well. Thank you very much.
73,
From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of John Carobine via Groups.Io
Sent: Wednesday, April 10, 2019 9:28 PM To: N3FJPSoftwareUsers@groups.io Subject: Re: [N3FJPSoftwareUsers] Odd LOTW Return Message
This is a "normal" message from LoTW when it's busy processing other files uploaded before your batch. LoTW hasn't gotten to your upload yet. As stated in the message you got below, this can happen after a busy contest weekend when lots of files are uploaded after the contest is over.
When you go back later, click on "All Since" and accept the default date. If your files have been processed you will see them appear in the data fields.
73,
WB8RFB
On Wednesday, April 10, 2019 07:44:25 PM CDT, Kevin Utzy <krutzy62@...> wrote:
All,
I normally get a normal message back from my LOTW uploads. I got some garbage in my return. Here is what I got:
‘\Users\Kevin\My Documents\Affirmatech\N3FJP Software\ACLog\LoTW.adi: Log uploaded successfully with result:
File queued for processing Úter reading this message, you may close this program. è ----- Nothing is changed in your log immediately following an upload to ensure that LoTW first properly processes your data. After you download the records that you uploaded to LoTW, AC Log will then mark them appropriately as sent in your log with an L in the Sent Confirmed By field to indicate LoTW. Please wait for LoTW to process your data (usually just a short time, but it can take up to a day or more following popular contests). Then do a Download to update your records.
Any ideas?
73,
|
|
|
|
Re: Club Log Uploader
Dan Trainor
Hello Scott,
Ah ok. I change password to just letters and numbers. Thanks for quick response! Dan WA1QZX
|
|
|
|
Re: Odd LOTW Return Message
John Carobine
This is a "normal" message from LoTW when it's busy processing other files uploaded before your batch. LoTW hasn't gotten to your upload yet. As stated in the message you got below, this can happen after a busy contest weekend when lots of files are uploaded after the contest is over. When you go back later, click on "All Since" and accept the default date. If your files have been processed you will see them appear in the data fields. 73, WB8RFB
On Wednesday, April 10, 2019 07:44:25 PM CDT, Kevin Utzy <krutzy62@...> wrote:
All,
I normally get a normal message back from my LOTW uploads. I got some garbage in my return. Here is what I got:
‘\Users\Kevin\My Documents\Affirmatech\N3FJP Software\ACLog\LoTW.adi: Log uploaded successfully with result:
File queued for processing Úter reading this message, you may close this program. è ----- Nothing is changed in your log immediately following an upload to ensure that LoTW first properly processes your data. After you download the records that you uploaded to LoTW, AC Log will then mark them appropriately as sent in your log with an L in the Sent Confirmed By field to indicate LoTW. Please wait for LoTW to process your data (usually just a short time, but it can take up to a day or more following popular contests). Then do a Download to update your records.
Any ideas?
73,
|
|
|
|
Odd LOTW Return Message
Kevin Utzy
All,
I normally get a normal message back from my LOTW uploads. I got some garbage in my return. Here is what I got:
‘\Users\Kevin\My Documents\Affirmatech\N3FJP Software\ACLog\LoTW.adi: Log uploaded successfully with result:
File queued for processing Úter reading this message, you may close this program. è ----- Nothing is changed in your log immediately following an upload to ensure that LoTW first properly processes your data. After you download the records that you uploaded to LoTW, AC Log will then mark them appropriately as sent in your log with an L in the Sent Confirmed By field to indicate LoTW. Please wait for LoTW to process your data (usually just a short time, but it can take up to a day or more following popular contests). Then do a Download to update your records.
Any ideas?
73,
|
|
|
|
Re: European FT8 DX contest
ARRL RTTY Roundup is supported in WSJT-X ver 2+. Have to select the contest and enter the exchange parameters. 73 Dave KM2O
On Wed, Apr 10, 2019 at 4:20 PM Frank MacKenzie-Lamb <maclamb@...> wrote:
|
|
|
|
Re: European FT8 DX contest
I don’t know how you can retrieve a state, province and serial from an FT8 contact which just confirms the call and the grid square…am I missing something (besides my mind 😊
Frank MacKenzie-Lamb
From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of David Galletly
From arrl.org:
|
|
|
|
Re: Club Log Uploader
Danny Bush
|
|
|
|
networking
jim crisco WA4YIZ
hi all..
attached is the final version of the networking info...
i had several respond that it help'd...
scott..please post to the files section if you like....
if anyone has any feedback...please email me..
jim
wa4yiz
|
|
|
|
Re: ACLog spots to Flex 6400 Panadapter
Scott Davis
Hi Dan,
toggle quoted messageShow quoted text
Thanks for your e-mail. Click Settings > Rig Interface and select Flex API from the rig list.
Enjoy!
73, Scott
N3FJP
Serving the Amateur Radio community with contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...
-----Original Message-----
From: Dan Trainor <dptrainor@...> To: N3FJPSoftwareUsers <N3FJPSoftwareUsers@groups.io> Sent: Wed, Apr 10, 2019 6:37 am Subject: [N3FJPSoftwareUsers] ACLog spots to Flex 6400 Panadapter Hello All, looking for instructions on how to setup ACLog DX spots to feed Flex API. Thanks in advance. dan WA1QZX
|
|
|
|
Re: Club Log Uploader
Scott Davis
Hi Dan,
toggle quoted messageShow quoted text
Thanks for your e-mail. I'm sorry that you have run into trouble. The Club Log server does not like the user name / password combination you have entered on the uploader form in AC Log. Make sure that it is correct and that you have not used any special characters (just stick with letters and numbers). Once you have your sign on information correct in AC Log, you will be all set.
Enjoy!
73, Scott
N3FJP
Serving the Amateur Radio community with contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...
-----Original Message-----
From: Dan Trainor <dptrainor@...> To: N3FJPSoftwareUsers <N3FJPSoftwareUsers@groups.io> Sent: Wed, Apr 10, 2019 6:37 am Subject: [N3FJPSoftwareUsers] Club Log Uploader Hello, I set up Club Log this evening. On their web site, I have registered and entered all my details and now have full access and privileges. In ACLog when using the "Club Log Uploader" dialog box, I get the following message below. Any suggestions on where to start troubleshooting would be great. Thanks in advance! dan WA1QZX
Creating ADIF file to be uploaded to Club Log...
ClubLog.adi created containing 848 record(s)!
Beginning Upload!
The remote server returned an error: (403) Forbidden.
|
|
|
