Date   

Re: New rig. Same problem with transmit audio files

Chad W6LU
 

I'll see if there anything that's different from my settings when I get in the shack later.  Like I sad, WSJT and FLDIGI work perfectly.  The N3FJP suite can control the rig and read the freq. Transmit audio does key the rig but there's just no audio. 


Re: Attempting to use AC Log in Wine again?

Jeff Steinkamp
 

This looks like a permission issue.  Since it is trying to create a new file, look to make sure the root folder, My Documents in your user folder, has read and write permissions.  The other problem here is that Linux does not like filenames that have a space in them.  Even though WINE is suppose to work around that,, I have yet to see that work correctly.  So, if it gives you the option to create that folder someplace else,   I would take that option.

Matthew Chambers NR0Q via Groups.Io wrote on 1/30/2019 12:19:

After having to replace my computer again and switching OSs from Mac back over to Linux, I'm attempting something I haven't done for a few years and am getting the attached screenshot'd error message? I figure that since it used to work, that I'm likely forgetting something.

OS is an up to date Fedora 29.



--
Jeff K. Steinkamp (N7YG)
Tucson, AZ
Scud Missile Coordinates
N32.2319 W110.8477


Re: New rig. Same problem with transmit audio files

Dennis Vandeveer <daddyvan2005@...>
 

Hi Chad,

This is what I have running. 991A and win 10 and I control the rig through WSJT-x. Straight USB cable computer to rig.

 

Mic set to 2-USB Audio CODEC. Speakers same way.

 

Under the radio settings I have:

FT-991

Com 4 or whatever you need

Baud rate 4800

8 data bits

2 stop bits

Handshake is Hardware

PTT CAT

Mode none

Split none

 

Works great that way

 

From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of Chad W6LU
Sent: Thursday, January 31, 2019 9:50 AM
To: N3FJPSoftwareUsers@groups.io
Subject: Re: [N3FJPSoftwareUsers] New rig. Same problem with transmit audio files

 

Adjusted how?  I've adjusted the computer's output volume from 1-100%.  Nothing.


Re: New rig. Same problem with transmit audio files

Chad W6LU
 

Adjusted how?  I've adjusted the computer's output volume from 1-100%.  Nothing.


Re: New rig. Same problem with transmit audio files

DAN REID
 

My appologies! I see you are connected direct between the rig and computer.
The audio from voice does need to be adjusted unlike the digital tones from ft8, jt65 and jt9.
dan kb6unc

----- Original Message -----
From: Chad W6LU
Sent: Wednesday, January 30, 2019 3:11 PM
Subject: [N3FJPSoftwareUsers] New rig. Same problem with transmit audio files

I have a Yaesu 991A.  It's hooked to my computer via the USB cable.  Digital send and receive through FLDIGI or WSJT work perfectly.  When I try to set up the audio files in any N3FJP software it only keys the rig but will not play the audio.  I've selected the correct audio output.  I'm not at that computer but it's something like "2 Speaker USB".  I can hear the rig's audio in the computer using that setting so I'm sure it's correct.  If I select my computer speakers, it keys the rig and plays the audio file through the computer speakers as it should.  No matter what I select, it won't play the audio through the rig.  

Chad Harzke
W6LU

 


Re: New rig. Same problem with transmit audio files

DAN REID
 

Are you using a signalink?
If so, check your input and output settings.
Unlike digital modes I have discovered that I need to crank it up almost all the way.
dan kb6unc

----- Original Message -----
From: Chad W6LU
Sent: Wednesday, January 30, 2019 4:46 PM
Subject: Re: [N3FJPSoftwareUsers] New rig. Same problem with transmit audio files

I only used that to test the audio.  I selected "2-USB Audio CODEC" for the rig.  It keys the rig but there's no audio to the rig.

Chad 
W6LU


Re: New rig. Same problem with transmit audio files

Chad W6LU
 

I only used that to test the audio.  I selected "2-USB Audio CODEC" for the rig.  It keys the rig but there's no audio to the rig.

Chad 
W6LU


Re: New rig. Same problem with transmit audio files

DAN REID
 

If you are hearing the audio through the computer speakers, you have not selected the correct audio device.  The only way you would hear these  audio files is if you  have a monitor option on the rig itself you can listen to while the rig is transmitting. 
Go to settings, transmitting and phone to change to the speaker usb mode.
dan kb6unc                 

----- Original Message -----
From: Chad W6LU
Sent: Wednesday, January 30, 2019 3:11 PM
Subject: [N3FJPSoftwareUsers] New rig. Same problem with transmit audio files

I have a Yaesu 991A.  It's hooked to my computer via the USB cable.  Digital send and receive through FLDIGI or WSJT work perfectly.  When I try to set up the audio files in any N3FJP software it only keys the rig but will not play the audio.  I've selected the correct audio output.  I'm not at that computer but it's something like "2 Speaker USB".  I can hear the rig's audio in the computer using that setting so I'm sure it's correct.  If I select my computer speakers, it keys the rig and plays the audio file through the computer speakers as it should.  No matter what I select, it won't play the audio through the rig.  

Chad Harzke
W6LU

 


New rig. Same problem with transmit audio files

Chad W6LU
 

I have a Yaesu 991A.  It's hooked to my computer via the USB cable.  Digital send and receive through FLDIGI or WSJT work perfectly.  When I try to set up the audio files in any N3FJP software it only keys the rig but will not play the audio.  I've selected the correct audio output.  I'm not at that computer but it's something like "2 Speaker USB".  I can hear the rig's audio in the computer using that setting so I'm sure it's correct.  If I select my computer speakers, it keys the rig and plays the audio file through the computer speakers as it should.  No matter what I select, it won't play the audio through the rig.  

Chad Harzke
W6LU

 


Re: Attempting to use AC Log in Wine again?

Scott Davis
 

Hi Matthew,

Thanks for your e-mail.  I know next to nothing about Linux myself, but I understand where Wine fails is exactly there - when the software goes to create your .MDB log file, Wine doesn't know how to handle that and returns the error you posted.

That said, Jeff, N7YG writes:

I have ACLog running on Linux!! It was a goat rope, but it is running, although a bit slow. The key is to start with a clean winepfrx. Then using wintricks you will need to install the following in order:

mono
jet40
dotnet45

Enjoy!


73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Matthew Chambers NR0Q via Groups.Io <mchambers@...>
To: N3FJPSoftwareUsers <N3FJPSoftwareUsers@groups.io>
Sent: Wed, Jan 30, 2019 2:30 pm
Subject: [N3FJPSoftwareUsers] Attempting to use AC Log in Wine again?

After having to replace my computer again and switching OSs from Mac back over to Linux, I'm attempting something I haven't done for a few years and am getting the attached screenshot'd error message? I figure that since it used to work, that I'm likely forgetting something.

OS is an up to date Fedora 29.



Attempting to use AC Log in Wine again?

Matthew Chambers NR0Q
 

After having to replace my computer again and switching OSs from Mac back over to Linux, I'm attempting something I haven't done for a few years and am getting the attached screenshot'd error message? I figure that since it used to work, that I'm likely forgetting something.

OS is an up to date Fedora 29.



Re: AC Log 6.4 will not accept FT8

Ed Armstrong <mrecaldarm@...>
 

That corrected it!

TNX
Ed



-----Original Message-----
From: Ed Armstrong via Groups.Io <mrecaldarm@...>
To: N3FJPSoftwareUsers <N3FJPSoftwareUsers@groups.io>
Sent: Wed, Jan 30, 2019 9:18 am
Subject: Re: [N3FJPSoftwareUsers] AC Log 6.4 will not accept FT8

I did not do it and will try it.

TNX,
Ed



-----Original Message-----
From: Garry Fisher <k9wzb1@...>
To: N3FJPSoftwareUsers <N3FJPSoftwareUsers@groups.io>
Sent: Wed, Jan 30, 2019 9:14 am
Subject: Re: [N3FJPSoftwareUsers] AC Log 6.4 will not accept FT8

UPdate your TQSL software
Garry K9WZB


On Wed, Jan 30, 2019 at 7:10 AM Ed Armstrong via Groups.Io <mrecaldarm=aol.com@groups.io> wrote:
I have been inactive for a year and just upgraded AC Log from 6.1 to 6.4.  Also I upgraded the FT8 software and JTAlert.

When I complete and FT8 contact, through JTAlert, AC Log accepts and logs the contact.

When I try to upload to LoTW, I get an error message that "FT8" is not a recognized mode.

Can anyone help?

TNX
Ed
ND8R


Re: AC Log 6.4 will not accept FT8

Ed Armstrong <mrecaldarm@...>
 

Lou,

That corrected it.

TNX
Ed



-----Original Message-----
From: Lou Everett, Sr. <loueverettsr@...>
To: N3FJPSoftwareUsers <N3FJPSoftwareUsers@groups.io>
Sent: Wed, Jan 30, 2019 10:42 am
Subject: Re: [N3FJPSoftwareUsers] AC Log 6.4 will not accept FT8

Have you upgraded your TQSL?

Lou. Wa5LOU

On Wed, Jan 30, 2019 at 8:10 AM Ed Armstrong via Groups.Io <mrecaldarm=aol.com@groups.io> wrote:
I have been inactive for a year and just upgraded AC Log from 6.1 to 6.4.  Also I upgraded the FT8 software and JTAlert.

When I complete and FT8 contact, through JTAlert, AC Log accepts and logs the contact.

When I try to upload to LoTW, I get an error message that "FT8" is not a recognized mode.

Can anyone help?

TNX
Ed
ND8R
--
Lou Everett, Sr., WA5LOU
Telephone:  317-749-9883

Love and compassion are necessities, not luxuries. Without them humanity cannot survive.
― Dalai Lama



Re: AC Log 6.4 will not accept FT8

Lou Everett, Sr. <loueverettsr@...>
 

Have you upgraded your TQSL?

Lou. Wa5LOU

On Wed, Jan 30, 2019 at 8:10 AM Ed Armstrong via Groups.Io <mrecaldarm=aol.com@groups.io> wrote:
I have been inactive for a year and just upgraded AC Log from 6.1 to 6.4.  Also I upgraded the FT8 software and JTAlert.

When I complete and FT8 contact, through JTAlert, AC Log accepts and logs the contact.

When I try to upload to LoTW, I get an error message that "FT8" is not a recognized mode.

Can anyone help?

TNX
Ed
ND8R

--
Lou Everett, Sr., WA5LOU
Telephone:  317-749-9883

Love and compassion are necessities, not luxuries. Without them humanity cannot survive.
― Dalai Lama



Re: AC Log 6.4 will not accept FT8

Larry Banks
 

Hi Ed,
 
Are you using the latest TQSL version?

73 -- Larry -- W1DYJ

 

Sent: Wednesday, January 30, 2019 9:10
Subject: [N3FJPSoftwareUsers] AC Log 6.4 will not accept FT8
 
I have been inactive for a year and just upgraded AC Log from 6.1 to 6.4.  Also I upgraded the FT8 software and JTAlert.

When I complete and FT8 contact, through JTAlert, AC Log accepts and logs the contact.

When I try to upload to LoTW, I get an error message that "FT8" is not a recognized mode.

Can anyone help?

TNX
Ed
ND8R


Re: FlDigi Version 4.1.0 Update Release With Major N3FJP Contest Software Enhancements!

Bo Barry <bobarr@...>
 

Ain't life grand! Bring on the contests!  No penciks/paper needed!

Many thanks to the developers!
73,  Bo W4GHV since '54
--
Bo W4GHV since '54


Re: AC Log 6.4 will not accept FT8

Ed Armstrong <mrecaldarm@...>
 

I did not do it and will try it.

TNX,
Ed



-----Original Message-----
From: Garry Fisher <k9wzb1@...>
To: N3FJPSoftwareUsers <N3FJPSoftwareUsers@groups.io>
Sent: Wed, Jan 30, 2019 9:14 am
Subject: Re: [N3FJPSoftwareUsers] AC Log 6.4 will not accept FT8

UPdate your TQSL software
Garry K9WZB


On Wed, Jan 30, 2019 at 7:10 AM Ed Armstrong via Groups.Io <mrecaldarm=aol.com@groups.io> wrote:
I have been inactive for a year and just upgraded AC Log from 6.1 to 6.4.  Also I upgraded the FT8 software and JTAlert.

When I complete and FT8 contact, through JTAlert, AC Log accepts and logs the contact.

When I try to upload to LoTW, I get an error message that "FT8" is not a recognized mode.

Can anyone help?

TNX
Ed
ND8R


Re: AC Log 6.4 will not accept FT8

Ed Armstrong <mrecaldarm@...>
 

I did NOT.

TNX and I will try it.

Ed



-----Original Message-----
From: N4CC Greg <N4cc@...>
To: N3FJPSoftwareUsers <N3FJPSoftwareUsers@groups.io>
Sent: Wed, Jan 30, 2019 9:15 am
Subject: Re: [N3FJPSoftwareUsers] AC Log 6.4 will not accept FT8

Did you update TQSL?
 
From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of Ed Armstrong via Groups.Io
Sent: Wednesday, January 30, 2019 7:10 AM
To: N3FJPSoftwareUsers@groups.io
Subject: [N3FJPSoftwareUsers] AC Log 6.4 will not accept FT8
 
I have been inactive for a year and just upgraded AC Log from 6.1 to 6.4.  Also I upgraded the FT8 software and JTAlert.

When I complete and FT8 contact, through JTAlert, AC Log accepts and logs the contact.

When I try to upload to LoTW, I get an error message that "FT8" is not a recognized mode.

Can anyone help?

TNX
Ed
ND8R


Re: AC Log 6.4 will not accept FT8

N4CC Greg <N4cc@...>
 

Did you update TQSL?

 

From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of Ed Armstrong via Groups.Io
Sent: Wednesday, January 30, 2019 7:10 AM
To: N3FJPSoftwareUsers@groups.io
Subject: [N3FJPSoftwareUsers] AC Log 6.4 will not accept FT8

 

I have been inactive for a year and just upgraded AC Log from 6.1 to 6.4.  Also I upgraded the FT8 software and JTAlert.

When I complete and FT8 contact, through JTAlert, AC Log accepts and logs the contact.

When I try to upload to LoTW, I get an error message that "FT8" is not a recognized mode.

Can anyone help?

TNX
Ed
ND8R


Re: AC Log 6.4 will not accept FT8

Garry Fisher
 

UPdate your TQSL software
Garry K9WZB


On Wed, Jan 30, 2019 at 7:10 AM Ed Armstrong via Groups.Io <mrecaldarm=aol.com@groups.io> wrote:
I have been inactive for a year and just upgraded AC Log from 6.1 to 6.4.  Also I upgraded the FT8 software and JTAlert.

When I complete and FT8 contact, through JTAlert, AC Log accepts and logs the contact.

When I try to upload to LoTW, I get an error message that "FT8" is not a recognized mode.

Can anyone help?

TNX
Ed
ND8R

12881 - 12900 of 49317