Date   

Re: countries total vs qsl

Scott Davis
 

Hi VE9VIC,

From the menu options click List > QSOs With Unconfirmed > Countries.

Enjoy!

73, Scott
N3FJP
 
Serving the Amateur Radio community with contesting and general logging software since 1997.
 
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...
 
 


-----Original Message-----
From: ve9vic@... [N3FJP_Software_Users] To: N3FJP_Software_Users
Sent: Mon, Jan 22, 2018 2:40 pm
Subject: [N3FJP_Software_Users] countries total vs qsl

 
when I look to my countries total I see the ones I have worked then I can see the ones that I have recieved qsl but is there a way to get a list of the countries that I worked but did not get a qsl , so I can keep track of the qsl missing for my dxcc. thank. 


Re: hamlog

rino deschenes <ve9vic@...>
 

thank, it is easy to go to their web site and add my adif log, Not sure but I think hamlog is use a lot by europe people, have a good day. 


On Monday, January 22, 2018 10:53 AM, "Scott & Kimberly Davis SNKDavis@... [N3FJP_Software_Users]" wrote:


 
Hi VE9VIC,

Thanks for your e-mail.  I'm not planning any additional eLog options at this time, but thanks for the suggestion.  I will give it some thought for the future.

Thanks again!


73, Scott
N3FJP
 
Serving the Amateur Radio community with contesting and general logging software since 1997.
 
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...
 
 


-----Original Message-----
From: ve9vic@... [N3FJP_Software_Users]
To: N3FJP_Software_Users
Sent: Mon, Jan 22, 2018 8:30 am
Subject: [N3FJP_Software_Users] hamlog

 
is it possible to add hamlog  in the elog section or maybe in the futur , it would be nice since I see a lot of people using hamlog. 



countries total vs qsl

ve9vic@...
 

when I look to my countries total I see the ones I have worked then I can see the ones that I have recieved qsl but is there a way to get a list of the countries that I worked but did not get a qsl , so I can keep track of the qsl missing for my dxcc. thank. 


Re: ACLog. eLogs conformation problem

reg williams
 

Hi Scott
Thank you for your prompt reply. I think AC LOG is a great program and easy to use. Personally I have never had a problem with any of its features including uploads and downloads for eLogs. My friend is coping with the logging program which he loves. He is not that computer familiar, so when it comes to uploads downloads for eLogs I think he becomes confused and has made some errors which has resulted in the problem he is experiencing. Best solution will be for me to visit him and try and sort the problem from there.
Many thanks once again for your comments.
Kind regards.
Reg G0OOF

On Mon, Jan 22, 2018 at 12:00 PM, Scott & Kimberly Davis SNKDavis@... [N3FJP_Software_Users] <N3FJP_Software_Users@...> wrote:
 

Hi regwilliamsfod,

Thanks for your e-mail.  In the case of eQSL, the Y is assigned on upload (unlike LoTW), so it sounds as if he may have been uploading outside of the software, via exporting in ADIF.  The assignment of the Y is automatic, so I really can't think of any other scenario that would explain what you describe.  That code has been around a good while now and there haven't been any other problem reports.


73, Scott
N3FJP
 
Serving the Amateur Radio community with contesting and general logging software since 1997.
 
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...
 
 


-----Original Message-----
From: regwilliamsfod@... [N3FJP_Software_Users] <N3FJP_Software_Users@yahoogroups.com>
To: N3FJP_Software_Users <N3FJP_Software_Users@yahoogroups.com>
Sent: Sun, Jan 21, 2018 1:09 pm
Subject: [N3FJP_Software_Users] ACLog. eLogs conformation problem

 
I have a friend who has been using AC Log for a little while now. I have been instructing him over the phone about how to use eLog. He started with uploading and then downloading with eqsl. All is fine, except there is no confirmation "Y" in the logging program for logs uploaded, even though "Mark records as qsl sent/received" box is ticked. I am not sure why this is. The upload is successful, as I have received confirmation through eql for a qso we had a few days previously.



Re: hamlog

Scott Davis
 

Hi VE9VIC,

Thanks for your e-mail.  I'm not planning any additional eLog options at this time, but thanks for the suggestion.  I will give it some thought for the future.

Thanks again!


73, Scott
N3FJP
 
Serving the Amateur Radio community with contesting and general logging software since 1997.
 
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...
 
 


-----Original Message-----
From: ve9vic@... [N3FJP_Software_Users]
To: N3FJP_Software_Users
Sent: Mon, Jan 22, 2018 8:30 am
Subject: [N3FJP_Software_Users] hamlog

 
is it possible to add hamlog  in the elog section or maybe in the futur , it would be nice since I see a lot of people using hamlog. 


Re: Is it just me hearing QRO stations?

Gary Antley <garyantley@...>
 

I ran QRO in the NAQP CW.  But then again I was trying to work all states on 40 meter CW.  I listed my score as HP too...
 
Gary D. Antley
Possum Walk Texas
DE KI5LR
 
“It is better to have enemies than friends.   At least you know they are out to get you.”  Gary David Antley


On Sunday, January 21, 2018 12:55 PM, "'Frank' maclamb@... [N3FJP_Software_Users]" wrote:


 
Instead of not submitting the lo, you should have sent it in as a check log so that those who contacted you will get credit for the call even though you don’t. They all will be docked one contact because their qso’s with you will be penalized.  But live and learn.
 
Yes I know a few hams that are Raytheon/Honeywell engineers who had  modified their amps to 3KW and 5 KW in key down CW.  Too bad….no enforcement but I never worked them as they go for the rare DX to get all DX countries and 5 and 6 band DXCC over 300.
 
So enough of that…this is a N3JFP thread
 
From: N3FJP_Software_Users@... [mailto:N3FJP_Software_Users@...]
Sent: Sunday, January 21, 2018 10:25 AM
To: N3FJP_Software_Users@...
Subject: Re: [N3FJP_Software_Users] Is it just me hearing QRO stations?
 
 
The first year I particpated in the NAQP I didn't know the maximum power was capped at 100 watts so I ran my amp.  I was back in ham radio after a very long break, late to the contest, and I simply didn't read the rules.  Things seemed odd, however. Signals weren't as strong as a normal contest and I was getting a lot of reports on how strong I was. So, I read the rules and I realized I was using too much power.  Naturally I didn't submit that log.  Lesson learned was to first read the rules before entering any contest.

Yesterday I was "running" stations on 20 meters when I got a call from a local ham who was barely above the noise level.  Normally he's 20 over S9 when my beam is his way which it was. He said he was running 5 watts as opposed to my 1K.  I told him the limit for NAQP was 100 watts and that's what I was using.  That ham has been licensed for 40 years but he's not a big contestor and he just asssumed legal limit power was the maximum allowed.

I have no doubt some people were cheating. Cheating happens in all contests,  but the NAQP is the only contest I can think of that limits power to 100 watts.  I'd be willing to bet quite a few of those using amps simply didn't read the rules.

73,

Chris
nu1oscar@aol..com



-----Original Message-----
From: Dale dalecole3502@... [N3FJP_Software_Users] <N3FJP_Software_Users@...>
To: N3FJP_Software_Users <N3FJP_Software_Users@...>
Sent: Sat, Jan 20, 2018 5:00 pm
Subject: RE: [N3FJP_Software_Users] Is it just me hearing QRO stations? [1 Attachment]
 
[Attachment(s) from Dale included below]
Hearing the same……
 
Sent from Mail for Windows 10
 
From: Rory amsoiltek@... [N3FJP_Software_Users]
Sent: Saturday, January 20, 2018 4:47 PM
To: N3FJP_Software_Users@...
Subject: [N3FJP_Software_Users] Is it just me hearing QRO stations?
 
 
Working the NAQP and it seems a few boys are running QRO!
 
I hear relays and fans going, shame on them.
 
 
Back to the contest 
 
N6OIL
 



hamlog

ve9vic@...
 

is it possible to add hamlog  in the elog section or maybe in the futur , it would be nice since I see a lot of people using hamlog. 


Re: ACLog. eLogs conformation problem

Scott Davis
 

Hi regwilliamsfod,

Thanks for your e-mail.  In the case of eQSL, the Y is assigned on upload (unlike LoTW), so it sounds as if he may have been uploading outside of the software, via exporting in ADIF.  The assignment of the Y is automatic, so I really can't think of any other scenario that would explain what you describe.  That code has been around a good while now and there haven't been any other problem reports.


73, Scott
N3FJP
 
Serving the Amateur Radio community with contesting and general logging software since 1997.
 
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...
 
 


-----Original Message-----
From: regwilliamsfod@... [N3FJP_Software_Users]
To: N3FJP_Software_Users
Sent: Sun, Jan 21, 2018 1:09 pm
Subject: [N3FJP_Software_Users] ACLog. eLogs conformation problem

 
I have a friend who has been using AC Log for a little while now. I have been instructing him over the phone about how to use eLog. He started with uploading and then downloading with eqsl. All is fine, except there is no confirmation "Y" in the logging program for logs uploaded, even though "Mark records as qsl sent/received" box is ticked. I am not sure why this is. The upload is successful, as I have received confirmation through eql for a qso we had a few days previously.


Re: Is it just me hearing QRO stations?

Frank <maclamb@...>
 

Instead of not submitting the lo, you should have sent it in as a check log so that those who contacted you will get credit for the call even though you don’t. They all will be docked one contact because their qso’s with you will be penalized.  But live and learn.

 

Yes I know a few hams that are Raytheon/Honeywell engineers who had  modified their amps to 3KW and 5 KW in key down CW.  Too bad….no enforcement but I never worked them as they go for the rare DX to get all DX countries and 5 and 6 band DXCC over 300.

 

So enough of that…this is a N3JFP thread

 

From: N3FJP_Software_Users@... [mailto:N3FJP_Software_Users@...]
Sent: Sunday, January 21, 2018 10:25 AM
To: N3FJP_Software_Users@...
Subject: Re: [N3FJP_Software_Users] Is it just me hearing QRO stations?

 

 

The first year I particpated in the NAQP I didn't know the maximum power was capped at 100 watts so I ran my amp.  I was back in ham radio after a very long break, late to the contest, and I simply didn't read the rules.  Things seemed odd, however. Signals weren't as strong as a normal contest and I was getting a lot of reports on how strong I was. So, I read the rules and I realized I was using too much power.  Naturally I didn't submit that log.  Lesson learned was to first read the rules before entering any contest.

Yesterday I was "running" stations on 20 meters when I got a call from a local ham who was barely above the noise level.  Normally he's 20 over S9 when my beam is his way which it was. He said he was running 5 watts as opposed to my 1K.  I told him the limit for NAQP was 100 watts and that's what I was using.  That ham has been licensed for 40 years but he's not a big contestor and he just asssumed legal limit power was the maximum allowed.

I have no doubt some people were cheating. Cheating happens in all contests,  but the NAQP is the only contest I can think of that limits power to 100 watts.  I'd be willing to bet quite a few of those using amps simply didn't read the rules.

73,

Chris
nu1oscar@...




-----Original Message-----
From: Dale dalecole3502@... [N3FJP_Software_Users] <N3FJP_Software_Users@...>
To: N3FJP_Software_Users <N3FJP_Software_Users@...>
Sent: Sat, Jan 20, 2018 5:00 pm
Subject: RE: [N3FJP_Software_Users] Is it just me hearing QRO stations? [1 Attachment]

 

[Attachment(s) from Dale included below]

Hearing the same……

 

Sent from Mail for Windows 10

 

From: Rory amsoiltek@... [N3FJP_Software_Users]
Sent: Saturday, January 20, 2018 4:47 PM
To: N3FJP_Software_Users@...
Subject: [N3FJP_Software_Users] Is it just me hearing QRO stations?

 

 

Working the NAQP and it seems a few boys are running QRO!

 

I hear relays and fans going, shame on them.

 

 

Back to the contest 

 

N6OIL

 


ACLog. eLogs conformation problem

reg williams
 

I have a friend who has been using AC Log for a little while now. I have been instructing him over the phone about how to use eLog. He started with uploading and then downloading with eqsl. All is fine, except there is no confirmation "Y" in the logging program for logs uploaded, even though "Mark records as qsl sent/received" box is ticked. I am not sure why this is. The upload is successful, as I have received confirmation through eql for a qso we had a few days previously.


Re: Is it just me hearing QRO stations?

John Huber
 

Chris / NU1O and all,
 
Sometimes an operator chooses to work a contest knowing they are not following one or more rules, for whatever reason.  Maybe the individual set a goal of worked all states during the contest on a single band? Maybe they just had the amp repaired and needed a good shakedown test.  Whatever the reason, IF they do not submit a log EXCEPT as a check log, then they are not cheating the entrants who follow the rules. 
 
Most contest organizers would like to see ANYONE who made contacts during a contest to submit a log.  That helps with the log checking of those logs entered in the contest.  I encourage everyone who makes even 1 casual contest contact to at least submit a check log. That one verified contact could affect the results for the other operator, like in the 2014 WRTC. 
 
73,  John / N8FYL
 

From: Chris nu1oscar@... [N3FJP_Software_Users]
Sent: Sunday, January 21, 2018 10:24
To: N3FJP_Software_Users@...
Subject: Re: [N3FJP_Software_Users] Is it just me hearing QRO stations?
 
 

The first year I particpated in the NAQP I didn't know the maximum power was capped at 100 watts so I ran my amp.  I was back in ham radio after a very long break, late to the contest, and I simply didn't read the rules.  Things seemed odd, however. Signals weren't as strong as a normal contest and I was getting a lot of reports on how strong I was. So, I read the rules and I realized I was using too much power.  Naturally I didn't submit that log.  Lesson learned was to first read the rules before entering any contest.

Yesterday I was "running" stations on 20 meters when I got a call from a local ham who was barely above the noise level.  Normally he's 20 over S9 when my beam is his way which it was. He said he was running 5 watts as opposed to my 1K.  I told him the limit for NAQP was 100 watts and that's what I was using.  That ham has been licensed for 40 years but he's not a big contestor and he just asssumed legal limit power was the maximum allowed.

I have no doubt some people were cheating. Cheating happens in all contests,  but the NAQP is the only contest I can think of that limits power to 100 watts.  I'd be willing to bet quite a few of those using amps simply didn't read the rules.

73,

Chris
nu1oscar@...



-----Original Message-----
From: Dale dalecole3502@... [N3FJP_Software_Users]
To: N3FJP_Software_Users
Sent: Sat, Jan 20, 2018 5:00 pm
Subject: RE: [N3FJP_Software_Users] Is it just me hearing QRO stations? [1 Attachment]

 
[Attachment(s) from Dale included below]

Hearing the same……

 

Sent from Mail for Windows 10

 

From: mailto:N3FJP_Software_Users@...
Sent: Saturday, January 20, 2018 4:47 PM
To: N3FJP_Software_Users@...
Subject: [N3FJP_Software_Users] Is it just me hearing QRO stations?

 

Working the NAQP and it seems a few boys are running QRO!

 

I hear relays and fans going, shame on them.

 

 

Back to the contest

 

N6OIL

 


Re: Is it just me hearing QRO stations? [1 Attachment]

Chris <nu1oscar@...>
 

The first year I particpated in the NAQP I didn't know the maximum power was capped at 100 watts so I ran my amp.  I was back in ham radio after a very long break, late to the contest, and I simply didn't read the rules.  Things seemed odd, however. Signals weren't as strong as a normal contest and I was getting a lot of reports on how strong I was. So, I read the rules and I realized I was using too much power.  Naturally I didn't submit that log.  Lesson learned was to first read the rules before entering any contest.

Yesterday I was "running" stations on 20 meters when I got a call from a local ham who was barely above the noise level.  Normally he's 20 over S9 when my beam is his way which it was. He said he was running 5 watts as opposed to my 1K.  I told him the limit for NAQP was 100 watts and that's what I was using.  That ham has been licensed for 40 years but he's not a big contestor and he just asssumed legal limit power was the maximum allowed.

I have no doubt some people were cheating. Cheating happens in all contests,  but the NAQP is the only contest I can think of that limits power to 100 watts.  I'd be willing to bet quite a few of those using amps simply didn't read the rules.

73,

Chris
nu1oscar@...



-----Original Message-----
From: Dale dalecole3502@... [N3FJP_Software_Users]
To: N3FJP_Software_Users
Sent: Sat, Jan 20, 2018 5:00 pm
Subject: RE: [N3FJP_Software_Users] Is it just me hearing QRO stations? [1 Attachment]

 
[Attachment(s) from Dale included below]

Hearing the same……

 

Sent from Mail for Windows 10

 

From: Rory amsoiltek@... [N3FJP_Software_Users]
Sent: Saturday, January 20, 2018 4:47 PM
To: N3FJP_Software_Users@...
Subject: [N3FJP_Software_Users] Is it just me hearing QRO stations?

 

 

Working the NAQP and it seems a few boys are running QRO!

 

I hear relays and fans going, shame on them.

 

 

Back to the contest 

 

N6OIL

 


Re: Is it just me hearing QRO stations?

Rory Sena
 

Not complaining, just an observation. I don't care what others do, they are ones that have to live themselves. Oh and Lou I am using N3JFP software and it's running great tied into my Flex 6500, the API and rig control is perfect. 

See you all in the remaining hours.

On Sat, Jan 20, 2018 at 4:12 PM, 'Lou Everett, Sr.' loueverettsr@... [N3FJP_Software_Users] <N3FJP_Software_Users@...> wrote:
 

Why bring it here?  Make a complaint to the contest chair.  This group is for discussing N3FJP software.

Lou Everett, Sr., WA5LOU




On Sat, Jan 20, 2018 at 5:34 PM, Roanin roanin2009@... [N3FJP_Software_Users] <N3FJP_Software_Users@yahoogroups.com> wrote:
 

If you heard my fans if from the two heaters I got going here in the basement!
Larry  N8CWU

On 1/20/2018 4:45 PM, Rory amsoiltek@... [N3FJP_Software_Users] wrote:
 
Working the NAQP and it seems a few boys are running QRO!

I hear relays and fans going, shame on them.


Back to the contest 

N6OIL




Re: Is it just me hearing QRO stations?

Lou Everett, Sr. <loueverettsr@...>
 

Why bring it here?  Make a complaint to the contest chair.  This group is for discussing N3FJP software.

Lou Everett, Sr., WA5LOU




On Sat, Jan 20, 2018 at 5:34 PM, Roanin roanin2009@... [N3FJP_Software_Users] <N3FJP_Software_Users@...> wrote:
 

If you heard my fans if from the two heaters I got going here in the basement!
Larry  N8CWU

On 1/20/2018 4:45 PM, Rory amsoiltek@... [N3FJP_Software_Users] wrote:
 
Working the NAQP and it seems a few boys are running QRO!

I hear relays and fans going, shame on them.


Back to the contest 

N6OIL



Re: Is it just me hearing QRO stations?

Larry Krist
 

If you heard my fans if from the two heaters I got going here in the basement!
Larry  N8CWU

On 1/20/2018 4:45 PM, Rory amsoiltek@... [N3FJP_Software_Users] wrote:
 
Working the NAQP and it seems a few boys are running QRO!

I hear relays and fans going, shame on them.


Back to the contest 

N6OIL


Re: Icom 7300/7610 N3FJP NAQP Log Phone Setup

Rich
 

No I haven't. I'm using the 7610 today, but thanks for the heads up.

Rich, K0PIR


Re: Is it just me hearing QRO stations?

K8TS
 

Hearing the same……

 

Sent from Mail for Windows 10

 

From: Rory amsoiltek@... [N3FJP_Software_Users]
Sent: Saturday, January 20, 2018 4:47 PM
To: N3FJP_Software_Users@...
Subject: [N3FJP_Software_Users] Is it just me hearing QRO stations?

 

 

Working the NAQP and it seems a few boys are running QRO!

 

I hear relays and fans going, shame on them.

 

 

Back to the contest 

 

N6OIL

 


Is it just me hearing QRO stations?

Rory Sena
 

Working the NAQP and it seems a few boys are running QRO!

I hear relays and fans going, shame on them.


Back to the contest 

N6OIL


Re: PCMatic SuperShield

Jeff Steinkamp
 

You will probably need to add an exception into the PCMatic software to allow that to run.  It shoudl tell you that it is blocking it somewhere.

Jeff K. Steinkamp (N7YG)
Tucson, AZ
Scud Missile Coordinates
N32.2319 W110.8477
On 1/20/2018 12:50, LongLostLake@... [N3FJP_Software_Users] wrote:

 

Has anyone had any problems running some of N3FJP's logging software under SuperShield (PCMatic)?
Most of the logging programs run just fine but some are blocked by SuperShield.  An example is the logging program for Minnesota QSO Party (MNQP).  Turn off SuperShield and they run ok.
Thanks, WA0LJM, Dave




PCMatic SuperShield

David Johnson
 

Has anyone had any problems running some of N3FJP's logging software under SuperShield (PCMatic)?
Most of the logging programs run just fine but some are blocked by SuperShield.  An example is the logging program for Minnesota QSO Party (MNQP).  Turn off SuperShield and they run ok.
Thanks, WA0LJM, Dave


18741 - 18760 of 52330