Date   

Re: Tuning wipes call

Mark Johns
 

Click on "log contact". Right side of window.
Yes, it's there on ACLog (which I use daily). My point is that it ISN'T there on the contest log.

--

Mark D. Johns, KØMDJ
Decorah, Iowa USA EN43
-----------------------------------------------
"Heaven goes by favor; if it went by merit,
you would stay out and your dog would go in."
---Mark Twain



________________________________
From: "billn4dh billn4dh@yahoo.com [N3FJP_Software_Users]" <N3FJP_Software_Users@yahoogroups.com>
To: N3FJP_Software_Users@yahoogroups.com
Sent: Monday, October 31, 2016 2:21 PM
Subject: Re: [N3FJP_Software_Users] Tuning wipes call




Click on "log contact". Right side of window.


Bill, N4DH

On Oct 31, 2016, at 2:09 PM, Mark Johns mjohns166@yahoo.com [N3FJP_Software_Users] <N3FJP_Software_Users@yahoogroups.com> wrote:



Yeah, I get that I can hit enter. But if I click on a DX spot with the mouse, and work the station that was filled in, why should I have to let go of the mouse to go back to the keyboard?

--

Mark D. Johns, KØMDJ
Decorah, Iowa USA EN43
-----------------------------------------------
"Heaven goes by favor; if it went by merit,
you would stay out and your dog would go in."
---Mark Twain

________________________________
From: "Scott & Kimberly Davis SNKDavis@aol.com [N3FJP_Software_Users]" <N3FJP_Software_Users@yahoogroups.com>
To: N3FJP_Software_Users@yahoogroups.com
Sent: Saturday, October 29, 2016 10:25 AM
Subject: Re: [N3FJP_Software_Users] Tuning wipes call

Hi Mark,

Thanks for your e-mail. To enter a contact, press the Enter key.

Enjoy!

73, Scott
N3FJP
http://www.n3fjp.com

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...



-----Original Message-----
From: Mark Johns mjohns166@yahoo.com [N3FJP_Software_Users] <N3FJP_Software_Users@yahoogroups.com>
To: N3FJP_Software_Users <N3FJP_Software_Users@yahoogroups.com>
Sent: Sat, Oct 29, 2016 8:14 am
Subject: Re: [N3FJP_Software_Users] Tuning wipes call

Am I missing something? Why is there no "Log Contact" mouse button on the contest log?

--

Mark D. Johns, KØMDJ
Decorah, Iowa USA EN43
-----------------------------------------------
"Heaven goes by favor; if it went by merit,
you would stay out and your dog would go in."
---Mark Twain

________________________________
From: "Scott & Kimberly Davis SNKDavis@aol.com [N3FJP_Software_Users]" <N3FJP_Software_Users@yahoogroups.com>
To: N3FJP_Software_Users@yahoogroups.com
Sent: Friday, October 28, 2016 7:51 PM
Subject: Re: [N3FJP_Software_Users] Tuning wipes call

Hi Craig,

Press Esc.

Enjoy!

73, Scott
N3FJP
http://www.n3fjp.com

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...

-----Original Message-----
From: Craig Valosin crvalosin@gmail.com [N3FJP_Software_Users] <N3FJP_Software_Users@yahoogroups.com>
To: n3fjp yahoo group <N3FJP_Software_Users@yahoogroups.com>
Sent: Fri, Oct 28, 2016 8:27 pm
Subject: [N3FJP_Software_Users] Tuning wipes call

Hi all
Is there a function on cqww logging where if you have a call entered in the log,but then can't work them, as you tune away from that freq the call is wiped from the log?

Thanks
Craig
VK2KDP

--
Sent from Gmail Mobile


Re: Tuning wipes call

Christopher Scibelli
 

I'm going to chime in also.  I've always wanted to do everything with a click of the mouse. In some of the contests (Not the big ones like CQWW) I am competitive enough and I have even won a few.  The faster the better.
 
Best Wishes,
 
Chris  NU1O
 
 
 

In a message dated 10/31/2016 7:06:51 P.M. Eastern Daylight Time, N3FJP_Software_Users@... writes:
 

Thanks Scott.

I work 12-hour shifts both day and night running the power grid.  I sit behind a bank of computer monitors, with a 8 ft x 12 ft Jumbo-tron type LED display on the wall giving me the status of the generators and major systems within my control area, and a 25 ft x 75 ft map-board showing all the lines @ 69kv, 115kv, 345kv and 500kv that are within my area and the adjacent utilities.  When something goes out and the action heats up, little things like this make a big difference in the speed at which you can operate the system.

Perhaps contesting is not so critical as running the power grid.  But anything that can speed the use of the software when making 100, 500, 1000 or more contacts can add up to significant time.  I get what he means.

Hope you have a great evening.  I am off to run the grid all night.

Vy73 - Mike - KD5KC.

El Paso, Texas - DM61rt.

W5-SOTA Association Manager.

NA-SOTA info: http://na-sota.org/

From: N3FJP_Software_Users@... [mailto:N3FJP_Software_Users@...]
Sent: Monday, October 31, 2016 16:33
To: N3FJP_Software_Users@...
Subject: Re: [N3FJP_Software_Users] Tuning wipes call




Hi Guys,

Thanks for the suggestion.  I will give it some thought.

73, Scott

N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...

-----Original Message-----
From: 'Mike Olbrisch' mike-2007@... [N3FJP_Software_Users] <N3FJP_Software_Users@...>
To: N3FJP_Software_Users <N3FJP_Software_Users@...>
Sent: Mon, Oct 31, 2016 6:19 pm
Subject: RE: [N3FJP_Software_Users] Tuning wipes call

 

I actually understand you on this. Especially when looking at the economy of motion, taking your hand off the mouse to hit enter is a wasted motion. Dunno if Scott will/can do that.... and I don't think it would help me at all.... but I get it.

Vy73 - Mike - KD5KC.
El Paso, Texas - DM61rt.
W5-SOTA Association Manager.
NA-SOTA info: http://na-sota.org/

-----Original Message-----
From: N3FJP_Software_Users@... [mailto:N3FJP_Software_Users@...]
Sent: Monday, October 31, 2016 12:09
To: N3FJP_Software_Users@...
Subject: Re: [N3FJP_Software_Users] Tuning wipes call

Yeah, I get that I can hit enter. But if I click on a DX spot with the mouse, and work the station that was filled in, why should I have to let go of the mouse to go back to the keyboard?

--

Mark D. Johns, KØMDJ
Decorah, Iowa USA EN43





Re: Tuning wipes call

Mike Olbrisch
 

Thanks Scott.

 

I work 12-hour shifts both day and night running the power grid.  I sit behind a bank of computer monitors, with a 8 ft x 12 ft Jumbo-tron type LED display on the wall giving me the status of the generators and major systems within my control area, and a 25 ft x 75 ft map-board showing all the lines @ 69kv, 115kv, 345kv and 500kv that are within my area and the adjacent utilities.  When something goes out and the action heats up, little things like this make a big difference in the speed at which you can operate the system.

 

Perhaps contesting is not so critical as running the power grid.  But anything that can speed the use of the software when making 100, 500, 1000 or more contacts can add up to significant time.  I get what he means.

 

Hope you have a great evening.  I am off to run the grid all night.

 

Vy73 - Mike - KD5KC.

El Paso, Texas - DM61rt.

W5-SOTA Association Manager.

NA-SOTA info: http://na-sota.org/

 

 

 

From: N3FJP_Software_Users@... [mailto:N3FJP_Software_Users@...]
Sent: Monday, October 31, 2016 16:33
To: N3FJP_Software_Users@...
Subject: Re: [N3FJP_Software_Users] Tuning wipes call

 




Hi Guys,

 

Thanks for the suggestion.  I will give it some thought.

 

 

73, Scott

N3FJP

 

Serving the Amateur Radio community with contesting and general logging software since 1997.

 

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...

 

 

 

-----Original Message-----
From: 'Mike Olbrisch' mike-2007@... [N3FJP_Software_Users] <N3FJP_Software_Users@...>
To: N3FJP_Software_Users <N3FJP_Software_Users@...>
Sent: Mon, Oct 31, 2016 6:19 pm
Subject: RE: [N3FJP_Software_Users] Tuning wipes call

 

I actually understand you on this. Especially when looking at the economy of motion, taking your hand off the mouse to hit enter is a wasted motion. Dunno if Scott will/can do that.... and I don't think it would help me at all.... but I get it.

Vy73 - Mike - KD5KC.
El Paso, Texas - DM61rt.
W5-SOTA Association Manager.
NA-SOTA info: http://na-sota.org/

-----Original Message-----
From: N3FJP_Software_Users@... [mailto:N3FJP_Software_Users@...]
Sent: Monday, October 31, 2016 12:09
To: N3FJP_Software_Users@...
Subject: Re: [N3FJP_Software_Users] Tuning wipes call

Yeah, I get that I can hit enter. But if I click on a DX spot with the mouse, and work the station that was filled in, why should I have to let go of the mouse to go back to the keyboard?

--

Mark D. Johns, KØMDJ
Decorah, Iowa USA EN43





Re: Tuning wipes call

Scott Davis
 


Hi Guys,

Thanks for the suggestion.  I will give it some thought.


73, Scott
N3FJP
 
Serving the Amateur Radio community with contesting and general logging software since 1997.
 
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...
 
 


-----Original Message-----
From: 'Mike Olbrisch' mike-2007@... [N3FJP_Software_Users]
To: N3FJP_Software_Users
Sent: Mon, Oct 31, 2016 6:19 pm
Subject: RE: [N3FJP_Software_Users] Tuning wipes call

 
I actually understand you on this. Especially when looking at the economy of motion, taking your hand off the mouse to hit enter is a wasted motion. Dunno if Scott will/can do that.... and I don't think it would help me at all.... but I get it.

Vy73 - Mike - KD5KC.
El Paso, Texas - DM61rt.
W5-SOTA Association Manager.
NA-SOTA info: http://na-sota.org/

-----Original Message-----
From: N3FJP_Software_Users@... [mailto:N3FJP_Software_Users@...]
Sent: Monday, October 31, 2016 12:09
To: N3FJP_Software_Users@...
Subject: Re: [N3FJP_Software_Users] Tuning wipes call

Yeah, I get that I can hit enter. But if I click on a DX spot with the mouse, and work the station that was filled in, why should I have to let go of the mouse to go back to the keyboard?

--

Mark D. Johns, KØMDJ
Decorah, Iowa USA EN43


Re: Tuning wipes call

Mike Olbrisch
 

I actually understand you on this. Especially when looking at the economy of motion, taking your hand off the mouse to hit enter is a wasted motion. Dunno if Scott will/can do that.... and I don't think it would help me at all.... but I get it.

Vy73 - Mike - KD5KC.
El Paso, Texas - DM61rt.
W5-SOTA Association Manager.
NA-SOTA info: http://na-sota.org/

-----Original Message-----
From: N3FJP_Software_Users@yahoogroups.com [mailto:N3FJP_Software_Users@yahoogroups.com]
Sent: Monday, October 31, 2016 12:09
To: N3FJP_Software_Users@yahoogroups.com
Subject: Re: [N3FJP_Software_Users] Tuning wipes call

Yeah, I get that I can hit enter. But if I click on a DX spot with the mouse, and work the station that was filled in, why should I have to let go of the mouse to go back to the keyboard?

--

Mark D. Johns, KØMDJ
Decorah, Iowa USA EN43


Re: LoTW Locations

Scott Davis
 


Thanks Craig,

It looks like the LoTW folks modified their station location output format.  I'm on it.


73, Scott
N3FJP
 
Serving the Amateur Radio community with contesting and general logging software since 1997.
 
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...
 
 


-----Original Message-----
From: craig.labarge@... [N3FJP_Software_Users]
To: N3FJP_Software_Users
Sent: Mon, Oct 31, 2016 3:40 pm
Subject: Re: [N3FJP_Software_Users] LoTW Locations

 
Scott:

I just emailed my station location file to you, along with a little addtional info.

Thanks!

73, Craig WB3GCK


Re: LoTW Locations

Craig WB3GCK
 

Scott:

I just emailed my station location file to you, along with a little addtional info.

Thanks!

73, Craig WB3GCK


Re: Tuning wipes call

billn4dh <billn4dh@...>
 

Click on "log contact".  Right side of window.


Bill, N4DH

On Oct 31, 2016, at 2:09 PM, Mark Johns mjohns166@... [N3FJP_Software_Users] <N3FJP_Software_Users@...> wrote:

 

Yeah, I get that I can hit enter. But if I click on a DX spot with the mouse, and work the station that was filled in, why should I have to let go of the mouse to go back to the keyboard?

--

Mark D. Johns, KØMDJ
Decorah, Iowa USA EN43
-----------------------------------------------
"Heaven goes by favor; if it went by merit,
you would stay out and your dog would go in."
---Mark Twain

________________________________
From: "Scott & Kimberly Davis SNKDavis@... [N3FJP_Software_Users]" <N3FJP_Software_Users@...>
To: N3FJP_Software_Users@...
Sent: Saturday, October 29, 2016 10:25 AM
Subject: Re: [N3FJP_Software_Users] Tuning wipes call

Hi Mark,

Thanks for your e-mail. To enter a contact, press the Enter key.

Enjoy!

73, Scott
N3FJP
http://www.n3fjp.com

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...



-----Original Message-----
From: Mark Johns mjohns166@... [N3FJP_Software_Users] <N3FJP_Software_Users@...>
To: N3FJP_Software_Users <N3FJP_Software_Users@...>
Sent: Sat, Oct 29, 2016 8:14 am
Subject: Re: [N3FJP_Software_Users] Tuning wipes call

Am I missing something? Why is there no "Log Contact" mouse button on the contest log?

--

Mark D. Johns, KØMDJ
Decorah, Iowa USA EN43
-----------------------------------------------
"Heaven goes by favor; if it went by merit,
you would stay out and your dog would go in."
---Mark Twain

________________________________
From: "Scott & Kimberly Davis SNKDavis@... [N3FJP_Software_Users]" <N3FJP_Software_Users@...>
To: N3FJP_Software_Users@...
Sent: Friday, October 28, 2016 7:51 PM
Subject: Re: [N3FJP_Software_Users] Tuning wipes call

Hi Craig,

Press Esc.

Enjoy!

73, Scott
N3FJP
http://www.n3fjp.com

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...

-----Original Message-----
From: Craig Valosin crvalosin@... [N3FJP_Software_Users] <N3FJP_Software_Users@...>
To: n3fjp yahoo group <N3FJP_Software_Users@...>
Sent: Fri, Oct 28, 2016 8:27 pm
Subject: [N3FJP_Software_Users] Tuning wipes call

Hi all
Is there a function on cqww logging where if you have a call entered in the log,but then can't work them, as you tune away from that freq the call is wiped from the log?

Thanks
Craig
VK2KDP

--



Re: Tuning wipes call

Larry Banks
 

I find I can easily hit the numeric keyboard “enter” with my thumb, which is right next to my mouse, so I don’t find this to be an issue..  (I am right-handed and use a full keyboard.)  Moving the had this way also may help prevent carpel-tunnel.

73 -- Larry -- W1DYJ

 

Sent: Monday, October 31, 2016 14:09
Subject: Re: [N3FJP_Software_Users] Tuning wipes call
 
 

Yeah, I get that I can hit enter. But if I click on a DX spot with the mouse, and work the station that was filled in, why should I have to let go of the mouse to go back to the keyboard?

--

Mark D. Johns, KØMDJ
Decorah, Iowa USA EN43
-----------------------------------------------
"Heaven goes by favor; if it went by merit,
you would stay out and your dog would go in."
---Mark Twain

________________________________
From: "Scott & Kimberly Davis SNKDavis@... [N3FJP_Software_Users]"
To: N3FJP_Software_Users@...
Sent: Saturday, October 29, 2016 10:25 AM
Subject: Re: [N3FJP_Software_Users] Tuning wipes call

Hi Mark,

Thanks for your e-mail. To enter a contact, press the Enter key.

Enjoy!

73, Scott
N3FJP
http://www.n3fjp.com

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...



-----Original Message-----
From: Mark Johns mjohns166@... [N3FJP_Software_Users]
To: N3FJP_Software_Users
Sent: Sat, Oct 29, 2016 8:14 am
Subject: Re: [N3FJP_Software_Users] Tuning wipes call

Am I missing something? Why is there no "Log Contact" mouse button on the contest log?

--

Mark D. Johns, KØMDJ
Decorah, Iowa USA EN43
-----------------------------------------------
"Heaven goes by favor; if it went by merit,
you would stay out and your dog would go in."
---Mark Twain

________________________________
From: "Scott & Kimberly Davis SNKDavis@... [N3FJP_Software_Users]" <N3FJP_Software_Users@...>
To: N3FJP_Software_Users@...
Sent: Friday, October 28, 2016 7:51 PM
Subject: Re: [N3FJP_Software_Users] Tuning wipes call

Hi Craig,

Press Esc.

Enjoy!

73, Scott
N3FJP
http://www.n3fjp.com

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...

-----Original Message-----
From: Craig Valosin crvalosin@... [N3FJP_Software_Users] <N3FJP_Software_Users@...>
To: n3fjp yahoo group
Sent: Fri, Oct 28, 2016 8:27 pm
Subject: [N3FJP_Software_Users] Tuning wipes call

Hi all
Is there a function on cqww logging where if you have a call entered in the log,but then can't work them, as you tune away from that freq the call is wiped from the log?

Thanks
Craig
VK2KDP

--
Sent from Gmail Mobile


Re: Tuning wipes call

Mark Johns
 

Yeah, I get that I can hit enter. But if I click on a DX spot with the mouse, and work the station that was filled in, why should I have to let go of the mouse to go back to the keyboard?

--

Mark D. Johns, KØMDJ
Decorah, Iowa USA EN43
-----------------------------------------------
"Heaven goes by favor; if it went by merit,
you would stay out and your dog would go in."
---Mark Twain



________________________________
From: "Scott & Kimberly Davis SNKDavis@aol.com [N3FJP_Software_Users]" <N3FJP_Software_Users@yahoogroups.com>
To: N3FJP_Software_Users@yahoogroups.com
Sent: Saturday, October 29, 2016 10:25 AM
Subject: Re: [N3FJP_Software_Users] Tuning wipes call





Hi Mark,

Thanks for your e-mail. To enter a contact, press the Enter key.

Enjoy!



73, Scott
N3FJP
http://www.n3fjp.com

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...




-----Original Message-----
From: Mark Johns mjohns166@yahoo.com [N3FJP_Software_Users] <N3FJP_Software_Users@yahoogroups.com>
To: N3FJP_Software_Users <N3FJP_Software_Users@yahoogroups.com>
Sent: Sat, Oct 29, 2016 8:14 am
Subject: Re: [N3FJP_Software_Users] Tuning wipes call



Am I missing something? Why is there no "Log Contact" mouse button on the contest log?

--

Mark D. Johns, KØMDJ
Decorah, Iowa USA EN43
-----------------------------------------------
"Heaven goes by favor; if it went by merit,
you would stay out and your dog would go in."
---Mark Twain

________________________________
From: "Scott & Kimberly Davis SNKDavis@aol.com [N3FJP_Software_Users]" <N3FJP_Software_Users@yahoogroups.com>
To: N3FJP_Software_Users@yahoogroups.com
Sent: Friday, October 28, 2016 7:51 PM
Subject: Re: [N3FJP_Software_Users] Tuning wipes call

Hi Craig,

Press Esc.

Enjoy!

73, Scott
N3FJP
http://www.n3fjp.com

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...



-----Original Message-----
From: Craig Valosin crvalosin@gmail.com [N3FJP_Software_Users] <N3FJP_Software_Users@yahoogroups.com>
To: n3fjp yahoo group <N3FJP_Software_Users@yahoogroups.com>
Sent: Fri, Oct 28, 2016 8:27 pm
Subject: [N3FJP_Software_Users] Tuning wipes call

Hi all
Is there a function on cqww logging where if you have a call entered in the log,but then can't work them, as you tune away from that freq the call is wiped from the log?

Thanks
Craig
VK2KDP

--


Re: LoTW Locations

Scott Davis
 


Hi All,

Jim, Craig or anyone else who is having this problem, would you please e-mail me direct the station location file generated by your TQSL software.  It will be in a path along the lines of:

C:\Users\YourUserProfileName\AppData\Roaming\TrustedQSL\station_data

I would like to take a look.

Thanks!


73, Scott
N3FJP
 
Serving the Amateur Radio community with contesting and general logging software since 1997.
 
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...
 
 


-----Original Message-----
From: Scott & Kimberly Davis SNKDavis@... [N3FJP_Software_Users]
To: N3FJP_Software_Users
Sent: Mon, Oct 31, 2016 5:59 am
Subject: Re: [N3FJP_Software_Users] LoTW Locations

 
Hi All,

I only have one station location here, so there is no way for me to check, but if you are having trouble with version 2.3 of TQSL, please let the TQSL folks know.

Thanks!


73, Scott
N3FJP
 
Serving the Amateur Radio community with contesting and general logging software since 1997.
 
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...
 
 


-----Original Message-----
From: 'Jim Shorney' jshorney@... [N3FJP_Software_Users] <N3FJP_Software_Users@...>
To: N3FJP_Software_Users <N3FJP_Software_Users@...>
Sent: Sun, Oct 30, 2016 8:57 pm
Subject: Re: [N3FJP_Software_Users] LoTW Locations

 

I noticed the same thing yesteday. I had two locations defined in TQSL; one
being my home station location for my call and the other being a location under
a certificate for a club call that I am trustee of. Yesteday I created a NPOTA
park location for my home call so I could upload an activation log. ACL will
only see two of the three at any given time and I had to restart it to get back
to my home location. ACL 5.7 and TQSL 2.3.

73

-Jim
NU0C

On 30 Oct 2016 14:06:10 -0700, craig.labarge@... [N3FJP_Software_Users]
wrote:

>I'm running ACLog 5.7 and TQSL 2.3. Since I upgraded TQSL to 2.3, ACLog no longer shows all of my locations in the pull-down list. I only see two, one of which was recently added directly into TQSL I can see them all in TQSL. All other LoTW functions seem to work fine from within ACLog. I have a laptop with the same software configuration (using the same database via Dropbox) and I see the same thing there.
>
>
>
> I have a 3rd laptop with ACLog 5.7 (using the same database) but TQSL is still at v2.2.2 on that one and the locations show up fine in ACLog.
>
>
> TQSL on all three computers have been restored from the same .tbk file. All three machines are running Windows 10 Pro.
>
>
>
> Has anyone else noticed this behavior with TQSL 2.3?
>
>
>
> Thanks.
>
>
>
> 73, Craig WB3GCK
>

--

"Life is too short for QRP" - ETO Alpha

"deciBels were invented to give QRPers a false sense of smugness" - NU0C


Re: Issue with CQ WW DX log 5.2

Scott Davis
 


HI Dave,

Thanks for your follow up.  You must have missed this in my previous reply, so I've bolded it for you:

You can edit one record at a time with my software.  This FAQ will help with bulk edits:


In addition, I've not tried it myself, but I've heard good reports of ADIF master for bulk editing.

Enjoy!

73, Scott
N3FJP
 
Serving the Amateur Radio community with contesting and general logging software since 1997.
 
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...
 
 


-----Original Message-----
From: Dave Archer davarc@... [N3FJP_Software_Users]
To: N3FJP_Software_Users
Sent: Mon, Oct 31, 2016 6:19 am
Subject: Re: [N3FJP_Software_Users] Issue with CQ WW DX log 5.2

 
OK Scott I'm using the contest log the CQ WW DX log,and I have 4.5   

I can select the records,but the only key that comes up is the delete key I do not want to delete the records I want to edit them   the edit key is not coming up when I select more than 1 entry 







On Oct 31, 2016, at 3:02 AM, Scott & Kimberly Davis SNKDavis@... [N3FJP_Software_Users] wrote:

 

Hi Dave,

Thanks for your e-mail.  You can edit one record at a time with my software.  This FAQ will help with bulk edits:


In addition, I've not tried it myself, but I've heard good reports of ADIF master for bulk editing.

Enjoy!


73, Scott
N3FJP
 
Serving the Amateur Radio community with contesting and general logging software since 1997.
 
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...
 
 


-----Original Message-----
From: Dave Archer davarc@... [N3FJP_Software_Users] <N3FJP_Software_Users@...>
To: N3FJP_Software_Users <N3FJP_Software_Users@...>
Sent: Mon, Oct 31, 2016 5:59 am
Subject: Re: [N3FJP_Software_Users] Issue with CQ WW DX log 5.2

 
HI Scott 

IN my log for WW-DX  contest log,  I need to edit 50 records how can I select the records that I need to edit?  or do I have to select one at a time?

I did not see any way to select all of the records I wanted to edit  

Dave

KA7RRA



Re: Issue with CQ WW DX log 5.2

Dave A
 

OK Scott I'm using the contest log the CQ WW DX log,and I have 4.5   

I can select the records,but the only key that comes up is the delete key I do not want to delete the records I want to edit them   the edit key is not coming up when I select more than 1 entry 







On Oct 31, 2016, at 3:02 AM, Scott & Kimberly Davis SNKDavis@... [N3FJP_Software_Users] wrote:

 


Hi Dave,


Thanks for your e-mail.  You can edit one record at a time with my software.  This FAQ will help with bulk edits:


In addition, I've not tried it myself, but I've heard good reports of ADIF master for bulk editing.

Enjoy!


73, Scott
N3FJP
 
Serving the Amateur Radio community with contesting and general logging software since 1997.
 
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...
 
 


-----Original Message-----
From: Dave Archer davarc@... [N3FJP_Software_Users] <N3FJP_Software_Users@...>
To: N3FJP_Software_Users <N3FJP_Software_Users@...>
Sent: Mon, Oct 31, 2016 5:59 am
Subject: Re: [N3FJP_Software_Users] Issue with CQ WW DX log 5.2

 
HI Scott 

IN my log for WW-DX  contest log,  I need to edit 50 records how can I select the records that I need to edit?  or do I have to select one at a time?

I did not see any way to select all of the records I wanted to edit  

Dave

KA7RRA



Re: Issue with CQ WW DX log 5.2

Scott Davis
 


Hi Dave,

Thanks for your e-mail.  You can edit one record at a time with my software.  This FAQ will help with bulk edits:


In addition, I've not tried it myself, but I've heard good reports of ADIF master for bulk editing.

Enjoy!


73, Scott
N3FJP
 
Serving the Amateur Radio community with contesting and general logging software since 1997.
 
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...
 
 


-----Original Message-----
From: Dave Archer davarc@... [N3FJP_Software_Users]
To: N3FJP_Software_Users
Sent: Mon, Oct 31, 2016 5:59 am
Subject: Re: [N3FJP_Software_Users] Issue with CQ WW DX log 5.2

 
HI Scott 

IN my log for WW-DX  contest log,  I need to edit 50 records how can I select the records that I need to edit?  or do I have to select one at a time?

I did not see any way to select all of the records I wanted to edit  

Dave

KA7RRA


Re: LoTW Locations

Scott Davis
 

Hi All,

I only have one station location here, so there is no way for me to check, but if you are having trouble with version 2.3 of TQSL, please let the TQSL folks know.

Thanks!


73, Scott
N3FJP
 
Serving the Amateur Radio community with contesting and general logging software since 1997.
 
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...
 
 


-----Original Message-----
From: 'Jim Shorney' jshorney@... [N3FJP_Software_Users] <N3FJP_Software_Users@...>
To: N3FJP_Software_Users <N3FJP_Software_Users@...>
Sent: Sun, Oct 30, 2016 8:57 pm
Subject: Re: [N3FJP_Software_Users] LoTW Locations

 

I noticed the same thing yesteday. I had two locations defined in TQSL; one
being my home station location for my call and the other being a location under
a certificate for a club call that I am trustee of. Yesteday I created a NPOTA
park location for my home call so I could upload an activation log. ACL will
only see two of the three at any given time and I had to restart it to get back
to my home location. ACL 5.7 and TQSL 2.3.

73

-Jim
NU0C

On 30 Oct 2016 14:06:10 -0700, craig.labarge@... [N3FJP_Software_Users]
wrote:

>I'm running ACLog 5.7 and TQSL 2.3. Since I upgraded TQSL to 2.3, ACLog no longer shows all of my locations in the pull-down list. I only see two, one of which was recently added directly into TQSL I can see them all in TQSL. All other LoTW functions seem to work fine from within ACLog. I have a laptop with the same software configuration (using the same database via Dropbox) and I see the same thing there.
>
>
>
> I have a 3rd laptop with ACLog 5.7 (using the same database) but TQSL is still at v2.2.2 on that one and the locations show up fine in ACLog.
>
>
> TQSL on all three computers have been restored from the same .tbk file. All three machines are running Windows 10 Pro.
>
>
>
> Has anyone else noticed this behavior with TQSL 2.3?
>
>
>
> Thanks.
>
>
>
> 73, Craig WB3GCK
>

--

"Life is too short for QRP" - ETO Alpha

"deciBels were invented to give QRPers a false sense of smugness" - NU0C


Re: Issue with CQ WW DX log 5.2

Dave A
 

HI Scott 

IN my log for WW-DX  contest log,  I need to edit 50 records how can I select the records that I need to edit?  or do I have to select one at a time?

I did not see any way to select all of the records I wanted to edit  

Dave

KA7RRA


Re: Issue with CQ WW DX log 5.2

Scott Davis
 


Hi Steve,

Thanks for your thoughts.  Points are calculated on entry, so try to correct the call sign before entering the contact.  If for some reason you make a mistake, you can always edit the points on the Edit form.  Also, keep in mind that the robot will calculate your points for you, so the points you record in the program will not affect your submitted score.

Enjoy!


73, Scott
N3FJP
 
Serving the Amateur Radio community with contesting and general logging software since 1997.
 
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...
 
 


-----Original Message-----
From: steve_wilson@... [N3FJP_Software_Users]
To: N3FJP_Software_Users
Sent: Sun, Oct 30, 2016 10:22 pm
Subject: [N3FJP_Software_Users] Issue with CQ WW DX log 5.2

 
Here is the scenario I ran into today:

1) I start entering a DX call into the log, but I am having problems understanding the callsign due to a heavy accent. 

2) I enter a partial call (such as Y) and 25 for the zone and press Enter. 0 points are listed, as expected due to the software not recognizing a country yet. Watch out for putting in a partial call that maps to a different country.

3) I go back and edit the entry and put in the full call (JA7YRR).

4) The Country is updated correctly, but the points are still 0!

I would have expected the points to update along with the country.

I had to delete the initial entry and create a new entry to get the 3 points. Yes...the workaround is to not press Enter until I get the full call, but I didn't. :-)

Thanks, Steve  KG6HJU


Re: New Feature request

Scott Davis
 


Hi Craig,

Thanks for the suggestion.  That is out of scope for the easy implementation pile, but I will give it some thought.

Enjoy!


73, Scott
N3FJP
 
Serving the Amateur Radio community with contesting and general logging software since 1997.
 
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...
 
 


-----Original Message-----
From: Craig Valosin crvalosin@... [N3FJP_Software_Users]
To: n3fjp yahoo group
Sent: Sat, Oct 29, 2016 6:54 pm
Subject: [N3FJP_Software_Users] New Feature request

 
Scott 
Doing the contest and trying to pick up some new Dx that use LOTW. Once I see on the log they have a L showing I always cross reference the WD5EAE page to see when there last upload was. Is there any way that you can get the date of the last upload to tie into your logging programs also? (Easily)
If not no problem. Just a thought

Craig
VK2KDP 


--


Issue with CQ WW DX log 5.2

Steve K6WW
 

Here is the scenario I ran into today:


1) I start entering a DX call into the log, but I am having problems understanding the callsign due to a heavy accent. 


2) I enter a partial call (such as Y) and 25 for the zone and press Enter. 0 points are listed, as expected due to the software not recognizing a country yet. Watch out for putting in a partial call that maps to a different country.


3) I go back and edit the entry and put in the full call (JA7YRR).


4) The Country is updated correctly, but the points are still 0!


I would have expected the points to update along with the country.


I had to delete the initial entry and create a new entry to get the 3 points. Yes...the workaround is to not press Enter until I get the full call, but I didn't. :-)


Thanks, Steve  KG6HJU


Re: LoTW Locations

Jim Shorney
 

I noticed the same thing yesteday. I had two locations defined in TQSL; one
being my home station location for my call and the other being a location under
a certificate for a club call that I am trustee of. Yesteday I created a NPOTA
park location for my home call so I could upload an activation log. ACL will
only see two of the three at any given time and I had to restart it to get back
to my home location. ACL 5.7 and TQSL 2.3.

73

-Jim
NU0C


On 30 Oct 2016 14:06:10 -0700, craig.labarge@gmail.com [N3FJP_Software_Users]
wrote:

I'm running ACLog 5.7 and TQSL 2.3. Since I upgraded TQSL to 2.3, ACLog no longer shows all of my locations in the pull-down list. I only see two, one of which was recently added directly into TQSL I can see them all in TQSL. All other LoTW functions seem to work fine from within ACLog. I have a laptop with the same software configuration (using the same database via Dropbox) and I see the same thing there.



I have a 3rd laptop with ACLog 5.7 (using the same database) but TQSL is still at v2.2.2 on that one and the locations show up fine in ACLog.


TQSL on all three computers have been restored from the same .tbk file. All three machines are running Windows 10 Pro.



Has anyone else noticed this behavior with TQSL 2.3?



Thanks.



73, Craig WB3GCK
--

"Life is too short for QRP" - ETO Alpha

"deciBels were invented to give QRPers a false sense of smugness" - NU0C