Scott, Cancel my last e-mail, sent at 8:53 p.m. I solved the problem with the help of George, K4EOR, another N3FJP subscriber who also uses an IC-7300 radio. Last week we both installed the

I routinely do both All and Confirmed, and I periodically also roll the dates back a few months. It does pick up stragglers every now and then for some reason. 73 -Jim NU0C "Dan Morris"

Scott, I checked all the items you mentioned, and the problem persists. I tried my N3FJP logs from previous contests, all configured for transmitting CW, which worked perfectly in those contests,

Gary - Have you checked out the info on the 718 from the N3FJP website? If not, you should. These are the rig interface settings: Icom 718 Rig Name = Icom Read Frequency Command = FE FE 5E E0 03

Hi Rino, If you are talking about the column titled ON LINE, an “L” there means they us LoTW. 73 -- Larry -- W1DYJ

Yes I went in and changed from automatic to 9600, I read in another post to try that. I'm beginning to think it may be my radio, I have tried every possible combination. Thanks, Gary K4GED

I've probably missed the topic but on my DX spot page, there is a column for IN LINE, what is it for ? -- TS590SG, 100 Watts, off center fed dipole. 73, Rino VE9VIC

I am just throwing this out there as a random thought in my head, I don’t have time to check it. But I just wonder…… Are these totally new contacts, or stations you have worked before? If

Hi Dale, Thanks for your follow up. We don't know of any reason why the Canadian provinces would show up in your County field. Be well and enjoy! 73, Kimberly, KA3SEQ http://www.n3fjp.com Serving the

Kimberly, KA3SEQ said: "Thanks for your follow up. Once this is unchecked only US states should appear for any new QSO records after changing the setting. Keep in mind, any connected program can still

And fixed the frequency box by adjusting the font (duh). Most excellent upgrade! Thank you. 73/Geoff K7GA Sent from Geoff’s iPhone X

Don’t use ‘Confirmed Since’ You will not get an ‘L’ in some of those records. You will only get an ‘L’ in those records confirmed as you selected. You need to choose ‘All since and a

Perfect, Scott! HD 36” TV - main screen for shack - and moving ACL over to 27” HD HP monitor and it adjusts just fine. The only quirky item is the “CY” is cut off in FREQUENCY (ok

Buck - The ‘L’ will not go in there when uploading to LOTW. It only goes in there after you do a download. I always highlight all the QSO’s I need to upload (as I do not do an upload

Lou is correct Buck — You will not see the ‘L’ after uploading. You will see it there after you complete a download and the ‘L’s will fill in. I’ve never had a problem with that part at

Have you tried setting the date for All Since back to before the offending QSO? 73 -JIm NU0C "Buck McDaniel" <n4pgwbuck@...> wrote:

Hi Dale, Thanks for your follow up. Once this is unchecked only US states should appear for any new QSO records after changing the setting. Keep in mind, any connected program can still feed that

Hi Dennis, Thanks for the follow up. To reset your column widths click Settings > Reset Columns to Default > DX Spots width. Be well and enjoy! 73, Kimberly, KA3SEQ http://www.n3fjp.com Serving the

I reset DX Spots Width to default and now the grid works FB. I had never used it before, so don't know why they wouldn't have been at the default already. No matter (to me), it's working now. 73,

Hi Van, Thanks for your e-mail. When you are operating mobile on a county line be sure to do the following: From the menu options click Change County. On the form that appears, click the button