Re: CW PTT
toggle quoted messageShow quoted text
Thanks for your follow up. Choose the com port you have your CW interface connected to, from the upper left list of the graphic you sent, under the Com Port heading.
The amp keying is opposite the CW keying, so since you have DTR keying selected, your amp will be keyed from the RTS line (assuming you have all that configured on the hardware side).
If you have any additional questions, I have lots of support for you on:
- Our Frequently Asked Questions (FAQ) page: http://www.n3fjp.com/faq.html (the vast majority of commonly asked questions are answered right here).
- Our website help section: http://www.n3fjp.com/help/index.html
- Our YouTube channel: https://www.youtube.com/playlist?list=PLkxw9QX84F4tFyX8JavCOD3XVUS5Dsznw
And if you still have questions after reviewing all the resources above, please feel free to search the topics and / or e-mail us on our users support e-mail group: https://groups.io/g/N3FJPSoftwareUsers
Serving the Amateur Radio community with contesting and general logging software since 1997.
From: Paul <sobonpaul@...>
Sent: Wed, Jan 20, 2021 8:57 am
Subject: Re: [N3FJPSoftwareUsers] CW PTT
Hi Scott -
I tried the CW PTT for Amps check box but I can't find where it defines which com port I am keying the PTT. After I check the box nothing happens. In the ACL Phone setup we configure the com port for PTT as shown. I am looking for the same set up for CW. Thanks and 73 - Paul NO0T