Re: Rig control Settings for FT-100D
toggle quoted messageShow quoted text
Thanks for the good report Noel!
Serving the Amateur Radio community with contesting and general logging software since 1997.
From: Noel W2MSA <noelw2msa@...>
Sent: Thu, Oct 22, 2020 9:58 pm
Subject: [N3FJPSoftwareUsers] Rig control Settings for FT-100D
I used these rig control settings for my Yaesu FT-100D with an FTDI FT232 cable I got on Amazon for $19.
Rig Name = Yaesu 100D
Read Frequency Command = 00 00 00 02 10
Read Mode Command =
Convert To Hex = True
Baud Rate = 4800
Parity = None
Stop Bits = 2
Data Bits = 8
Power Option = None
Polling = 500ms