Re: Is there a way to tune rig frequency using keyboard while running AClog?


Scott Davis
 

Hi Greg,

Thanks for your e-mail.  I'm unable to duplicate what you describe with my 7610.  If for example I tune to the edge of the CW / SSB portion of 10 meters, 28.300.02 and press Ctrl + Up, the rig mode changes to CW as the rig tunes to 28.299.97.  If I then press Ctrl + Down (twice because the CW increments are smaller), the rig tunes to 28.300.01 and the mode changes back to SSB.

If you paste a screen capture of your rig interface settings into an e-mail, it might bring something to light.

73, Scott
N3FJP

Serving the Amateur Radio community with contesting and general logging software since 1997.

1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...


-----Original Message-----
From: Greg Cook via groups.io <kgregc1@...>
To: N3FJPSoftwareUsers@groups.io
Sent: Mon, Oct 19, 2020 9:21 pm
Subject: Re: [N3FJPSoftwareUsers] Is there a way to tune rig frequency using keyboard while running AClog?

Scott,

With the rig interface engaged, pressing Ctrl + Up changes the SSB mode on my IC-7300 to CW. Pressing Ctrl + Down, for example, does not change it back to SSB. I have to reset it on the radio. Any advice?

Thanks,
Greg
JO3SLK

Join N3FJPSoftwareUsers@groups.io to automatically receive all group messages.