To get WSJT-X and JTAlert to interface with the N3FJP log

1. Fire up ACLog

2. Fire up WSIT-X

3. Fire up JTAlert

4. In JTAlert select Settings

5. Select Manage Settings

6. Select Logging

7. Select ACLog

8. Check Enable ACLogging

9. Check the two boxs below enable

10. Select Auto or manual

11. fill out the boxes for the selection

12. Select Log Type at bottom of screen.

When you click on a station in WSJT-X, it will send data to JTAlert.

JTAlert will then send data to the N3FJP Log

In operation when you get the popup after the RR73 is sent. When you click log it will log to the

internal log and send the Log entry to N3FJP  log and it will log the contact.

Hope I did not miss a step or if unclear then read the published text files or post another question here

JoAnn Donaldson - AB8YZ

On Saturday, September 5, 2020, 12:17:11 PM CDT, Lou Everett, Sr. <loueverettsr@...> wrote:

This is true.  But, we need to be kind, not so blunt.  I don't think it was meant that way, but we must remember mood and intent go out the window when using text.  So sometimes a few extra kind words can take the edge off.

Y'all have a GREAT weekend.  ENJOY.

73 and God Bless!

Lou WA5LOU

On Sat, Sep 5, 2020 at 1:10 PM Jim Shorney <jshorney@...> wrote:

What's wrong is that the same questions get asked over and over when the answers are already readily available.

73

-Jim
NU0C

On Sat, 5 Sep 2020 11:59:02 -0500
"n0dpr@..." <n0dpr@...> wrote:

> What’s wrong with people? Response to a question should never be “read the instructions”, what a rude answer.
>
> Sent from Xfinity Connect App
>
> ------ Original Message ------
>
> From: Gary Woods
> To: n3fjp
> Sent: September 5, 2020 at 11:45 AM
> Subject: Re: [N3FJPSoftwareUsers] Maybe wrong place for ?
>
> On Sat, 5 Sep 2020 11:36:39 -0500, you wrote: >Is there a way to populate n3fjp when using WSJT-x and JT alert? If you mean transferring the contact to n3fjp, yes; it's all in the help files and easy even for an old guy. Existing logs from WSJT-X can be imported to n3fjp. Not in the shack, so can't give Heathkit check-by-step info, but dead easy. -- Gary Woods O- K2AHC Public keys at home.earthlink.net/~garygarlic, or get 0x1D64A93D via keyserver fingerprint = E2 6F 50 93 7B C7 F3 CA 1F 8B 3C C0 B0 28 68 -- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus
>
>
>