Re: Rig Control Failure FD Mode with WSJT-X, N3FJP and JTAlert


Michael WA7SKG
 

So I installed flrig v 1.3.50. I fire it up and tell the applications to use flrig for radio type. The problem now is, flrig won't run longer than about 2 minutes before it spontaneously shuts down. No clue, no error, just poof, it's gone. I can't keep it running long enough to see if the other apps are actually working through it.

Michael WA7SKG


Jeff Grantham wrote on 6/21/20 5:26 PM:

Not sure if I was clear. Once you get FLRig running select that as your radio in wsjtx and fldigi
Get Outlook for iOS <https://aka.ms/o0ukef>
------------------------------------------------------------------------
*From:* N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> on behalf of Larry Banks via groups.io <larryb.w1dyj=verizon.net@groups.io>
*Sent:* Sunday, June 21, 2020 7:25:49 PM
*To:* N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io>
*Subject:* Re: [N3FJPSoftwareUsers] Rig Control Failure FD Mode with WSJT-X, N3FJP and JTAlert
Hi Michael,
I start JTAlert and then have it start WSJT-X and then whichever N3FJP
program I am using at the time, in that order.  WSJT-X does the rig
interfacing.
73 -- Larry -- W1DYJ
-----Original Message-----
From: Michael WA7SKG
Sent: Sunday, June 21, 2020 19:47
To: N3FJPSoftwareUsers@groups.io
Subject: [N3FJPSoftwareUsers] Rig Control Failure FD Mode with WSJT-X, N3FJP
and JTAlert
Getting ready for Field Day. I have the latest versions of WSJT-X
(2.2.1), JTAlert (2.16.8), and N3FJP Field Day Log (6.3).
My understanding is to start N3FJP > WSJT-X > JTAlert in that order. I
have followed the various tutorials and instructions for setting these
up. When I start WSJT-X, I get a "Rig Control Error" box asking to set
up the rig parameters (IC-7300). These are all correct. Running WSJT-X
by itself is no problem. Only when N3FJP is running do I have an issue.
I am obviously missing something. Any suggestions as to what?
--
73,
Michael WA7SKG
"Any day you do not learn one new thing is a wasted day."

Join N3FJPSoftwareUsers@groups.io to automatically receive all group messages.