Re: AC log settings
Most certainly.toggle quoted messageShow quoted text
If AC-Log seems to be remembering the last freq the radio was on, just type <CTRL>-<SHIFT>-<R> and it will disable rig interface. Then you can type in whatever freq you want. When you turn the radio on again, just retype <CTRL>-<SHIFT>-<R> and rig interface will be re-enabled.
Enjoy. Good luck and stay healthy.
Mike – KD5KC -- El Paso -- Texas.
The canyons are calling, colorful and deep. But I have promises to keep.
And miles to go still in my Jeep... And miles to go still in my Jeep...
ADVENTURE: The respectful pursuit of trouble.
From: N3FJPSoftwareUsers@groups.io <N3FJPSoftwareUsers@groups.io> On Behalf Of kc6mie
Sent: Thursday, March 26, 2020 8:21 AM
To: AC Log Group <N3FJPSoftwareUsers@groups.io>
Subject: [N3FJPSoftwareUsers] AC log settings
I’ve posted questions about this before but trying to have a better understanding of what is going on. Can you use AC log to log contacts when AC log is connected to a radio and that radio is not on. In rig settings when the AC log is on just to log contacts I have these settings:
Connection power - none
Mode - don’t use
When I use the radio and AC log the settings are these:
Connection power - RTS
Mode - Rig
Frequently when I’m using AC log (not connected to a rig) it won’t let me select a band or freq. it reverts back to what ever freq and band it was.
I think I’ve missed a setting somewhere. I understand that come from the rig but if the rig is not on??
Thanks and I hope I made this clear.