Re: winkeyer question on amateur contact log

Jed Barton

ok, so there appears to be some sort of issue. I have the com port
set correctly. What else do i need to set in the winkeyer setup? I
just left all of the defaults.


On 6/26/18, [N3FJP_Software_Users]
<> wrote:

You should be in the main log window and you use the F keys to send the
programmed message or exchange if that's what you're after. There are
special characters used to create a message or exchange in the WinKeyer
window (where you define each F key function). Make sure that the WinKeyer
was confirmed "open - success !" before you close that window or it won't

Mark KN7T

----- Original Message -----

From: "Jed Barton [N3FJP_Software_Users]"
To: "n3fjp_software_users" <>
Sent: Tuesday, June 26, 2018 10:17:08 AM
Subject: [N3FJP_Software_Users] winkeyer question on amateur contact log

Hey guys,

OK a question. It looks like i have configured the winkeyer in
amateur contact log. So what window should i be in when i want it to
I'm in the main window right now where i can tab through the fields to
enter the call and all that. Any ideas?


Join to automatically receive all group messages.