I'm having difficulty wrapping my head around this. To the best of my knowledge telnet clusters report spot frequencies rounded to the nearest 0.1 KHz and for that matter RBN nodes report CW spots onl

If anyone has this combo working reliably, please contact me. I’m also trying to use an NN1C SO2R Mini but I’ll do something else if I know it works! I also use two keyboards... Ty K3MM Sent from the

I'm considering trying the CW Reader available in N1MM+ Logger, even though the K3S has that functionality. My laptop is currently connected to the USB port on the rig. According to the K3S manual, th

I wonder if there is a feature of N1MM that I have overlooked. I am familiar with the WriteLog S&P Frequency Memories window. It enabled weak stations like mine to make a list of potentially workable

I have to be missing something. I have never had problems before recording the messages ya know Ctrl+Shift+F# I decided to separate the HAM sounds from the rest of the computer sounds, so got a USB ex

Modal windows are those that prevent you from doing anything else... common examples are the Ctrl-K Send CW dialog, or the many Question dialogs, like the "Want to Close?" or "... Radio Not Responding

Good Morning. I have a question. I have two tranceiver configurated in the program. Ftdx-101mp with 1 Ic-7100 with 2 With transceiver 1 not problema But with transceiver two no connect. or I do not kn

Rarely, and I will say again rarely, N1MM loses the band/Frequency when I change bands. An example would be going from 80M to 40M; N1MM Frequency , Band Map & Mults still thinks I am on the original b

I have been trying to figure this out and have looked through post history on subject and still cannot figure it out. It worked fine before but for some reason it doesnt any longer. The com port 3 wit

Hello, I try to see the structure or example of the objective file. I did not find anything to download on the site ... Thank you 73 from F4CVQ I have some tutorial on N1MM in French. How can I put th

A couple weeks ago, after updates of both N1MM+ and Windows 10, the logger fails to close when I exit. A box appears saying Windows will close the program, and notify me if a solution is found. When I

Not using latest version. I upgraded last week however. Windows 7 2 Keyboard SO2R Modus operandi this weekend was: Run on radio 1 (CQ repeat turned on) S&P on radio 2 Connected to VE7CC (I normally go

We bounced this idea around in the past years but I'm not sure it ever made it into the N1MM cluster list: Is there an easy way to filter the N1MM Cluster list accessible in the Telnet window, to only

Hi N1MM+ users, We are looking for a few testers of a new version of N1MM+ before we roll it out to all users. This new version is focused on how antennas can be selected by the program (if you have a

For the past several weeks or so I get this every time I start the program when I am setting up for CWOPS CWT. -- I download the latest Call History and import it so it all works okay. But I can't fig

Tried searching, but couldn't find the relevant topic. hardware: ic7300 + winkeyer latest version of n1mm+ With the ic7300 in breakin "off" mode (i.e. unless you physically push the transmit button, n

I'm attempting SO2R for RTTY contesting on Flex 6600 with N1MM+. With the Flex open without N1MM+ switching the TX radio (slice) does not activate muting of RX in the non TX radio. When I open N1MM+,

Just finished ARRL DX CW. I couldn't help but notice that whenever I ran (calling CQ), I was spotted in the Telnet window by a HUGE number of entries. I have never seen this before. They were all of t

When setting up for the ARRL DX contest this weekend, I found an issue in the Window>Multipliers>Countries. When that window opens it defaults to “All”, showing all continents. Then you can select to

Goodnight everyone. I recently I am a user of this fantastic program, and I would like to ask one thing. I have seen that, at least in videos, which for ICOM IC-7300, there is a panadapter in the prog