Topics

crash

barry whittemore
 

NE1F and I have had a persistent issue since the switch to logger plus.

we have a unique situation compared to most.

We have two PCs connected through an RS232 switch that has been modified to have the TX from the rig tied to bot RX lines on the two PCs.
This has allowed us to each track what the radio is sending out as long as one is controlling the radio.
PCs are both Win 7 with real RS232 not USB adapters.


The rig is K3 at 38400 baud.

The problem did not ever exist with logger but showed up with logger plus.

all works fine for a while but eventually the PC that is not in control gets a crash and the box pops up asking to send data. at that point it is completely locked up and the only option is to run task manager and force shutdown of program.  We have noticed that if left alone it sometimes will pop up the force close box after about 30 mins.

Most of the time it occurs on the NE1F PC as she is usually not the controller but when she is it happens on NF1O PC so it does not appear to be related to one PC.

We have occasionally gotten the error box on a PC that is in control and it is easily cleared and recovered from.

Any ideas on what we can try?

Thanks
Barry
NF1O


Vytenis LY5T
 

Are there any relevant messages in N1MM+ Logerror.txt or Windows Eventviewer?

Vytenis
ly5t

barry whittemore
 

here is the fiirst few lines from one of the logerror files. they are 5-6 Mb files.
i do not know what to look for.
thanks
barry

 System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
   at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg)
   at System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(IntPtr dwComponentID, Int32 reason, Int32 pvLoopData)
   at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)
   at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)
   at System.Windows.Forms.Application.RunDialog(Form form)
   at System.Windows.Forms.Form.ShowDialog(IWin32Window owner)
   at System.Windows.Forms.Form.ShowDialog()
   at N1MMLogger.Net.EntryWindow.ShowErrorMessageWindow(String messageText) in Logger.Net\Forms\EntryWindow.vb:line 16883
   at N1MMLogger.Net.SharedCode.HandleError(Exception e, String PortName, String Info) in Logger.Net\Modules\SharedCode.vb:line 226
   at N1MMLogger.Net.CWIFInterfaceClass.HandleNonXMLMessage(Object& data, String& aStr) in Logger.Net\Classes\CWIFInterface.vb:line 584
   at N1MMLogger.Net.CWIFInterfaceClass.HandleMessage(Object& data) in Logger.Net\Classes\CWIFInterface.vb:line 546
   at N1MMLogger.Net.EntryWindow.HandleSerialMessage(Byte[] arr) in Logger.Net\Forms\EntryWindow.vb:line 17259
   at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor)
   at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments)
   at System.Delegate.DynamicInvokeImpl(Object[] args)
   at System.Windows.Forms.Control.InvokeMarshaledCallbackDo(ThreadMethodEntry tme)
   at System.Windows.Forms.Control.InvokeMarshaledCallbackHelper(Object obj)
   at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
   at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
   at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
   at System.Windows.Forms.Control.InvokeMarshaledCallback(ThreadMethodEntry tme)
   at System.Windows.Forms.Control.InvokeMarshaledCallbacks()
   at System.Windows.Forms.Control.WndProc(Message& m)
   at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
   at System.Windows.Forms.Form.WndProc(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
   at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg)
   at System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(IntPtr dwComponentID, Int32 reason, Int32 pvLoopData)
   at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)
   at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)
   at System.Windows.Forms.Application.RunDialog(Form form)
   at System.Windows.Forms.Form.ShowDialog(IWin32Window owner)
   at System.Windows.Forms.Form.ShowDialog()

Steve London
 

Stop N1MM+, delete LogError.txt and recreate the error. You will then have a much smaller LogError.txt to work with.

73,
Steve, N2IC

On 07/22/2015 08:40 AM, wb1edi@... [N1MMLoggerplus] wrote:
here is the fiirst few lines from one of the logerror files. they are
5-6 Mb files.
i do not know what to look for.
thanks
barry

System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32
msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg)
at
System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(IntPtr
dwComponentID, Int32 reason, Int32 pvLoopData)
at
System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32
reason, ApplicationContext context)
at
System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32
reason, ApplicationContext context)
at System.Windows.Forms.Application.RunDialog(Form form)
at System.Windows.Forms.Form.ShowDialog(IWin32Window owner)
at System.Windows.Forms.Form.ShowDialog()
at N1MMLogger.Net.EntryWindow.ShowErrorMessageWindow(String
messageText) in Logger.Net\Forms\EntryWindow.vb:line 16883
at N1MMLogger.Net.SharedCode.HandleError(Exception e, String PortName,
String Info) in Logger.Net\Modules\SharedCode.vb:line 226
at N1MMLogger.Net.CWIFInterfaceClass.HandleNonXMLMessage(Object&
data, String& aStr) in Logger.Net\Classes\CWIFInterface.vb:line 584
at N1MMLogger.Net.CWIFInterfaceClass.HandleMessage(Object& data) in
Logger.Net\Classes\CWIFInterface.vb:line 546
at N1MMLogger.Net.EntryWindow.HandleSerialMessage(Byte[] arr) in
Logger.Net\Forms\EntryWindow.vb:line 17259
at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[]
arguments, Signature sig, Boolean constructor)
at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(Object
obj, Object[] parameters, Object[] arguments)
at System.Delegate.DynamicInvokeImpl(Object[] args)
at
System.Windows.Forms.Control.InvokeMarshaledCallbackDo(ThreadMethodEntry
tme)
at System.Windows.Forms.Control.InvokeMarshaledCallbackHelper(Object
obj)
at System.Threading.ExecutionContext.RunInternal(ExecutionContext
executionContext, ContextCallback callback, Object state, Boolean
preserveSyncCtx)
at System.Threading.ExecutionContext.Run(ExecutionContext
executionContext, ContextCallback callback, Object state, Boolean
preserveSyncCtx)
at System.Threading.ExecutionContext.Run(ExecutionContext
executionContext, ContextCallback callback, Object state)
at
System.Windows.Forms.Control.InvokeMarshaledCallback(ThreadMethodEntry tme)
at System.Windows.Forms.Control.InvokeMarshaledCallbacks()
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
at System.Windows.Forms.Form.WndProc(Message& m)
at
System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32
msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg)
at
System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(IntPtr
dwComponentID, Int32 reason, Int32 pvLoopData)
at
System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32
reason, ApplicationContext context)
at
System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32
reason, ApplicationContext context)
at System.Windows.Forms.Application.RunDialog(Form form)
at System.Windows.Forms.Form.ShowDialog(IWin32Window owner)
at System.Windows.Forms.Form.ShowDialog()

barry whittemore
 

well, i deleted the logerror file and then finally got the crash again. when hovering over logerror it said it was ~5kb but when i copyied it and tried to open it it became 94Mb and really hung up notepad.
i have deleted it and emptied recycle bin so will wait for another crash.
barry
nf1o

barry whittemore
 

This morning i was not watching the pcs but it crashed and the resulting logerror file says 11 mb
what should i look for?
thanks
barry
nf1o

Steve London
 

The last 200 lines in the file. Please send to problem@... .

73,
Steve, N2IC

On 07/25/2015 07:35 AM, barry whittemore wb1edi@... [N1MMLoggerplus] wrote:
This morning i was not watching the pcs but it crashed and the resulting
logerror file says 11 mb
what should i look for?
thanks
barry
nf1o

Chester Alderman <aldermant@...>
 

Come on barry!! How the he** can you expect anybody to help you when you
give no helpful info at all? What PC? What NL+ version? What Op system? What
radio....etc.? Your post doesn't tell anything.

Tom - W4BQF

-----Original Message-----
From: N1MMLoggerplus@... [mailto:N1MMLoggerplus@...]

Sent: Saturday, July 25, 2015 9:36 AM
To: n1mmloggerplus
Subject: [N1MMLoggerplus] re: crash



This morning i was not watching the pcs but it crashed and the resulting
logerror file says 11 mb what should i look for?
thanks
barry
nf1o