Is it just me? I copy the 10 QTC's from a station, then an hour later the station shows as no QTC's RXed in the bandmap, and the QTC's are gone in the scrolling log! Bill, 9A/KO7SS

In the RTTY WAE the QTC's go BOTH ways for any 2 stations on any 2 different continents, in my case W7 <--> Asia and W7 <--> South America in these days of no sunspots, and yes it is fun to be on the

What's daylight savings? They don't even mention it in the papers or newscasts here in AZ. UTC DOES NOT DO DAYLIGHT SAVINGS! 73, Bill KO7SS

Sorry my mistake. I was entering states instead of ARRL sections for those calls not in the Call History, that's why it was taking me to F8 (repeat) 73, Bill KO7SS

Actually the sequencing works when the call is in the call history, it goes to F3 TU If the exchange is entered manually it goes to F8

With ESM on and the QSO complete, it goes to F8 instead of F3 73, Bill KO7SS

I don't think so. W2GD operated the 2018 ARRL DX SSB using the Web interface logging program, downloaded the ADIF file and imported it into N1MM after the contest to generate an entry: https://3830sco

The screen is a bit demanding with the clicks. Being in W7, I don't get a lot of practice RXing QTC's but it seems critical that the mouse click is on the very last digit of each line, for 1610-DP7W-0

CAT KY keying has a few quirks. I use it between K3's when contesting remote on RHR because I don't have an RRC. This may be a keyboard timing issue: W8ABC answers your CQ. You start typing in the ent

Did a full reinstall of N1MM and MMTTY. TRX AutoUpdate not checked. K3S in AFSK-A, Making lots of QSO's by spinning the dial or CQing. Click on a bandmap spot and it goes there for an instant then shi

Not turned on. Further investigation shows when I click on the spot it goes to the spot for an instant, then Up 2125 khz. That must mean something I just don't know what :) Rig is K3S in AFSK A. I wen

Just turned on N1MM for the NA RTTY. Downloaded the latest version. S&P QSO's work just fine. Clicking on a bandmap spot, either with the mouse or CTRL UP/DOWN, moves the RX for a moment to the spot f

V 1.0.7598.0 Opening up Gray Line window works fine, but then trying to adjust size of window brings up "Can't run 2 instances of N1MM at the same time" and program goes down. 73, Bill

I don't use the CAT KY commands for my home station. It is the way RemoteHamRadio works without $$$ RemoteRig boxes. It turns out to be an inexpensive way to key a distant K3S from the N1MM contest pr

The rig here is a K3S and N1MM+ The syntax I have been using is F1 CQ,{CATA1ASC KY CQ CQ KO7SS;} I just tried it using your {CAT1ASC KY CQ CQ KO7SS;} and that works fine also. Try it using CATA1ASC KY

I always knew I was special, and this is exactly the affirmation I needed :)))) 73, Bill KO7SS in genuine W7/Arizona

The problem is there are very few clusters up and running 24/7. The prepopulated list that comes with N1MM is obsolete. These are the only ones left, my local one is NC7J, Max/NG7M does a good job: ht

When it was time to get QTC's, I would bring up the QTC RX window just to use the QRV button, then sit and watch the QTC's roll on the screen, making sure I eventually had 10 clean clickable QTC's vis

I assume that you have signed on successfully to one of the clusters? Very few of the ones that are on the N1MM list actually work. NC7J or VE7CC seem most reliable. On the filters tab check all the b

The N1MM WAE RTTY QTC window is amazing software. Thank you to the developers! My main issue was a quivering/flickering cursor in the RX window as the QTC's were being sent. Eventually my procedure wa