Karl, A man after my own heart! I spent many happy hours exchanging RTTY art on HF and VHF. The last mechanical gear I had was a 28ASR geared at 100WPM with an ST-6 and UT-4. At full 100 WPM the 28 wa

Please add info to the documentation: "In order to see this option, SO2V must be selected". Thanks to W0PR for helping me find this.

Rich: That was it!!!! Thanks for your help.

N1MM throws this error even though the serial port in the Hardware tab of the Configurer is set to a different port. Is there somewhere else that the COM port is set?

John, Thanks for the reply. Yes, the configurer is set that way. I neglected to say that N1MM+ works perfectly without VSPE in the mix. -J John Bednar via groups.io wrote on 1/30/2021 9:18 AM:

I'm trying to get N1MM+ to share my K3's serial port with OmniRig using VSPE. I use DTR to do CW keying of the K3. I'm having trouble finding the correct DTR setting for VSPE; either the CW keying doe

Config, Configure Ports, (etc), Function keys. Top left tick box.

Probably better on the HRD forum.

Monte, Please RTFM. Open N1MM, select Help/Supported contests & setup. Your browser will open showing "Supported Contests List". Click on "2.5 Digital, RTTY, and PSK Contests". The third entry in this

What does Device Manager show under ports?

Yes!

#poll-notice

Thanks for the tip, Rich. I set it up but didn't really care for the presentation. Integrates nicely, though and there were no resource issues. -John NI0K ve3ki wrote on 12/5/2020 8:44 AM:

When I open the Spectrum Display window, which is fed by an RSP1, it seems to cause problems with N1MM. Entry window actions sometimes get very slow to respond and if I close the Spectrum Display wind

What is the problem with K3 CW?

Rick, Would you kindly share how you share the spectrum data from the SDR?

While I haven't used N1MM remotely, I do run remote. For remote desktop I used Google Chrome Remote. Since TeamViewer is actually a paid product it often complains that it detected a commercial enviro

I'm using the latest version of N1MM and PSTRotator. N1MM doesn't control the rotor any more.... it used to! I had to re-install N1MM with all new configurations and I think I have something wrong. Su

I'm running N1MM V 1.0.8718.0. When I operate CW Run, sending F2 Exch it sends his call, then the exchange. When I change to Morse Runner mode (changing nothing else), hitting F2 Exch omits his call.

John, There are some references on the web regarding Win7 SP1 USB problems. Since we don't know which SP your system is I can take a stab it having you look at Microsoft KB: https://support.microsoft.

I have multiple monitors on my shack PC. One of them is set to 125% sizing to help me read fine print. If I want to see a bigger version of a window I just drag it onto that monitor.