|
VE mults
And I have the available window set to display only mults, and the counter says one, yet there are several in the window....
And I have the available window set to display only mults, and the counter says one, yet there are several in the window....
|
By
Jamie WW3S
· #46220
·
|
|
VE mults
Ditto.....unless they were in call history, then they were not coded as a mult....it’s almost backwards from other contests, when VE doesn’t show as a mult, yet it should,....
Ditto.....unless they were in call history, then they were not coded as a mult....it’s almost backwards from other contests, when VE doesn’t show as a mult, yet it should,....
|
By
Jamie WW3S
· #46219
·
|
|
30% off Airspy HF+ this week
how does the Airspy compare to an RSP1?
how does the Airspy compare to an RSP1?
|
By
Jamie WW3S
· #46046
·
|
|
Icom voice memories?
Is there a way for the software to trigger the internal Icom voice memories?
Is there a way for the software to trigger the internal Icom voice memories?
|
By
Jamie WW3S
· #45809
·
|
|
TX focus switching problems with Flex 6600M
FWIW, I had a 6600, separate Maestro...bought it mainly because it’s marketed as SO2R in the box.....I never could solve the TX switching problem.....mainly used on RTTY and cqing on two bands was dif
FWIW, I had a 6600, separate Maestro...bought it mainly because it’s marketed as SO2R in the box.....I never could solve the TX switching problem.....mainly used on RTTY and cqing on two bands was dif
|
By
Jamie WW3S
· #45783
·
|
|
cannot get Call History to work in CW or Phone Sweepstakes
what contest are you set up for? call history lookup is unique to the contest selected, for example, ARRL_DX_CW wont work if you have SS selected as the contest, they have to match.....and then press
what contest are you set up for? call history lookup is unique to the contest selected, for example, ARRL_DX_CW wont work if you have SS selected as the contest, they have to match.....and then press
|
By
Jamie WW3S
· #45598
·
|
|
so2r and cabrillo problem
It is NOT against the rules in multi-one to have both radios transmit at the same time, unless they are on the same band.....you can do what you want to do, just do it with two pcs....been there, done
It is NOT against the rules in multi-one to have both radios transmit at the same time, unless they are on the same band.....you can do what you want to do, just do it with two pcs....been there, done
|
By
Jamie WW3S
· #45564
·
|
|
so2r and cabrillo problem
Because SO2R is not within the multi single rules.....in ms you cannot cq on 2 bands at one time, SO2R you can....in mult single you can only work multipliers on the second radio, SO2R you can work an
Because SO2R is not within the multi single rules.....in ms you cannot cq on 2 bands at one time, SO2R you can....in mult single you can only work multipliers on the second radio, SO2R you can work an
|
By
Jamie WW3S
· #45538
·
|
|
Spot management
What type of cluster do you connect to?
What type of cluster do you connect to?
|
By
Jamie WW3S
· #45524
·
|
|
F2 Macro
Remember, MM is contest software, and in a contest everyone is 5NN, even if they need to repeat part of the exchange... Sent from my Verizon Motorola Smartphone
Remember, MM is contest software, and in a contest everyone is 5NN, even if they need to repeat part of the exchange... Sent from my Verizon Motorola Smartphone
|
By
Jamie WW3S
· #45442
·
|
|
Call-frame versus AMQ window pick
For newer users....learn to use this window, much more powerful and useful than the band map !!
For newer users....learn to use this window, much more powerful and useful than the band map !!
|
By
Jamie WW3S
· #45411
·
|
|
ctrl -k send cw
I dont usually use this option but this weekend I need it, when I open it, it keeps the focus....is that the intent? When I have crtl-k window open, I cant send any f keys by using the mouse....I have
I dont usually use this option but this weekend I need it, when I open it, it keeps the focus....is that the intent? When I have crtl-k window open, I cant send any f keys by using the mouse....I have
|
By
Jamie WW3S
· #45331
·
|
|
ESM sending "Fixed Call" VS TU
Not sure why anyone on Flex forum would advise that, but I believe you, there’s a lot of misinformation on that group, and since Flex itself “recommends” you posting to that group for support, main re
Not sure why anyone on Flex forum would advise that, but I believe you, there’s a lot of misinformation on that group, and since Flex itself “recommends” you posting to that group for support, main re
|
By
Jamie WW3S
· #45265
·
|
|
ESM sending "Fixed Call" VS TU
Don’t reinvent the wheel.....instead, Use SmartCAT to configure a virtual port as winkey, then configure MM to use that port as winkeyer. It’s not that difficult and there are hundreds of us using MM
Don’t reinvent the wheel.....instead, Use SmartCAT to configure a virtual port as winkey, then configure MM to use that port as winkeyer. It’s not that difficult and there are hundreds of us using MM
|
By
Jamie WW3S
· #45249
·
|
|
ESM sending "Fixed Call" VS TU
Why would you use the CAT commands to send cw with a Flex? It has a built in winkeyer emulator....
Why would you use the CAT commands to send cw with a Flex? It has a built in winkeyer emulator....
|
By
Jamie WW3S
· #45248
·
|
|
CLEARRIT for Flex?
Yes, not working.....I press and hold RX on Slice A , it turns the RIT on, and when I press F3, which includes {CLEARRIT} the RIT stays where it last was......if used that way though, the VFO for Slic
Yes, not working.....I press and hold RX on Slice A , it turns the RIT on, and when I press F3, which includes {CLEARRIT} the RIT stays where it last was......if used that way though, the VFO for Slic
|
By
Jamie WW3S
· #45219
·
|
|
CLEARRIT for Flex?
Is there a command to clear the RIT using a Flex 6600? I tried {CLEARRIT} and it doesnt reset
Is there a command to clear the RIT using a Flex 6600? I tried {CLEARRIT} and it doesnt reset
|
By
Jamie WW3S
· #45196
·
|
|
getting extra DIT with mortty
This may be related to the Flex. Im connecting remotely, but using Maestro locally.....using a single lever paddle, I'm getting an extra DIT sent when I release the dash....I have iambic disabled in t
This may be related to the Flex. Im connecting remotely, but using Maestro locally.....using a single lever paddle, I'm getting an extra DIT sent when I release the dash....I have iambic disabled in t
|
By
Jamie WW3S
· #45195
·
|
|
Multipliers for States / Sections
Update to recent version.....the mult table has had the new sections for years now....
Update to recent version.....the mult table has had the new sections for years now....
|
By
Jamie WW3S
· #45181
·
|
|
no keying with mortty via f keys
setting up for sweepstakes, have mortty unit, i connect to the pc, i get the HI blinky, it creates com16, I configure MM to use COM16 as winkeyer port.....it works once.....then I have to restart pc t
setting up for sweepstakes, have mortty unit, i connect to the pc, i get the HI blinky, it creates com16, I configure MM to use COM16 as winkeyer port.....it works once.....then I have to restart pc t
|
By
Jamie WW3S
· #45179
·
|