Confirming that yes, I can relay to 127.0.0.1:13064 running within the server instance of Logger. (I had to edit the .ini file with the local IP address to work around the problem of the rapidly disap

Thanks, Tom. I've checked the internal IP addresses for port forwarding. They all appear to be correct (and long-ago nailed so they don't change on me). The LAN IP address of the control computer does

One is build 18362 and the other 18363. I'll see if I can get the 18362 one to update, but I doubt that's the problem. Thanks, /Rick N6XI

Sorry - accidentally hit a key that sent the message below before I was done composing. Below is full intended text: Either way, there is no spectrum data and SD window title bar shows no source. They

It's deja vu all over at N6XI/Remote. The last time this happened, it self-corrected after about 100 restarts of various components. So far this time it's continuing. I'd grateful for any more advice

Try stretching its shape by grabbing a corner. I think it switches when height > width. /Rick N6XI

Thanks, Gary. It's repeatable here with somewhat different undesirable results from time to time. Also happens when the machine goes to sleep, either on command or via timeout. Also running Win 10. Si

When I minimize all of N1MM via the "_" in the URH corner and then restore it by clicking on the taskbar icon, the Spectrum Display window sort of disappears from the secondary display some of the tim

Nit: How long does one "own" a frequency? (No, not YOU, just the Other Folks) I've noticed that if I've been CQing on one band, QSY to another band(s) for hours, then return to the first band via Entr

Thanks, Tom. I had tried all but that last suggestion of opening another window at the radio site and trying a local relay. Tried that just now and yes, the radio site server instance of MM can relay

Before CQWW, I had Spectrum Display running at my radio QTH and relaying spectrum down to my city/control QTH. I took the Airspy HF+ with me to PZ5W where it worked great in a local configuration duri

Maybe you're partially on your local disk and partially on OneDrive? I ran Windows 10 for about a year before I realized that it defaulted everything to its cloud service, OneDrive. I'm still not full

Any chance of an in-program function that gathers all windows onto the base display in one swell foop? Rick N6XI -- Rick Tavan

:-) No complaint about time required, Tom. But no one wants to interrupt a run to re-do it. I did it Thurs on all machines IIRC and will do it again as I rotate thru them today - only 2 operating posi

Is it really necessary to warn about a version mismatch at a multi every 5 seconds? We’ll update it when the rate drops but don’t need thousands of warning messages! Rick N6XI -- Rick Tavan

OK, thanks Chris. No, won’t be working stations from the third listen-only position. Now I understand that I can have two “RunN” computers. /Rick -- Rick Tavan

Thanks, Tom. No interest in working found mults, just band mapping them. But need to get thru specifying Run1 or Run2 which are the actual transmit positions. Rick N6XI -- Rick Tavan

Check DTR/Rts settings on the Config Hardware line for your radio? If it treats either as PTT, that’s what you’d see. Rick N6XI -- Rick Tavan

Is there a way to have a third computer online when operating M/2, both for multiplier searching and as a hot standby? Trying this, MM insists that the third computer be either Run1 or Run2. There are

It works fine for me. I haven't noticed any difference from the original (which I also have). I haven't yet used it in a multi-tx environment but will try it in a M/2 in CQWW. /Rick N6XI

#spectrum