I believe that should be 38,400. Also, from recent experience, be sure that the other variables match between the virtual serial port and N1MM. I just helped a guy get it going where the issue was one

Interesting, Bob. Not my experience, though, as you say, 99 percent of the time I'm using headphones and my radio's sidetone. The Winkeyer is not totally muted, just turned down too far to hear easily

If you follow the instructions in the N1MM+ manual closely you should have no trouble. I do note one fatal error in some of the messages on this topic - the IP address for "this computer" is 127.0.0.1

Getting set up for CQWW CW, and have a small problem. My Winkeyer USB's sidetone is fine when using it standalone or with the WKDemo, but when I start MM+ it is muted almost to inaudible. That suggest

And, of course, you need to identify the call history file to be used on the Associated Files tab of the Contest Setup dialog. 73, Pete N4ZR Check out the Reverse Beacon Network at <http://reversebeac

Doesn't it *only* work in SO2R? 73, Pete N4ZR Check out the Reverse Beacon Network at <http://reversebeacon.net>, now spotting RTTY activity worldwide. For spots, please use your favorite "retail" DX

Did you Enable Call history Lookup on the Config menu? 73, Pete N4ZR Check out the Reverse Beacon Network at <http://reversebeacon.net>, now spotting RTTY activity worldwide. For spots, please use you

That's the key question. For example ARC V6 allows Set/DX/Filter Mode=CW, but cautions that this filter is based on "normal operating frequencies" which are widely ignored during contests. 73, Pete N4

When S&P, I use "TU" instead of NR, to confirm receipt, set the expectation as to CW speed, and to alert the op on the other end to be ready for the number next. 73, Pete N4ZR Check out the Reverse Be

I experienced this a few times during SS - I would click on a callsign in the AMQ window, but instead of the clicked call appearing in the call-frame, ready for ESM, I would see another call in the ca

Getting ready for SS, and noticed that my spectrum display has faint stripes spaced exactly 1 KHz apart, none of which are audible. Using an Airspy HF+ fed from the RX In/Out loop on my K3. There appe

Getting set up for CW SS, using a 2011 function key file, and I see a macro, {PREVNR} in a couple of places, but a search of the manual didn't find it. It appears to send my sent number from the last

There were two problems I became painfully aware of when I manually updated the list last year: You have no way of knowing about new clusters that have joined the community since the last list Not all

Hi Ted. I had forgotten all about that feature, which seems like it would be fine during the QSO. Do you know any way to fix it once the QSO has been logged? I just tried to run that tool (Add Call to

Mike, I don't know which, if any cluster file is included in updates of MM+, but you can find the latest cluster list at <https://n1mmwp.hamdocs.com/mmfiles/clusters-2019-10-11-txt/> 73, Pete N4ZR Che

A couple of caveats - this list lacks a couple of longtime stalwarts, W9PA and W3LPL. There are probably a number of others. Also, the list includes the RBN's Telnet feed, which is intended only to pr

I would like to be able to use a receiving antenna on my K3 while also using the spectrum display of N1MM+. I assume from the manual's discussion of using the HF+ that it *must* be used on the Ant Out

Also be sure you are using a current wl_cty.dat file. Just taking Antarctica as an example, the file says: Antarctica: 13: 74: SA: -90.00: 0.00: 0.0: CE9: 3Y[73],AX0(39)[69],AY1Z[73],AY2Z[73],AY3Z[73]

Try one of the old faithful clusters - NC7J, W3LPL, W9PA, for three. They are all on MM+'s cluster list. 73, Pete N4ZR Check out the Reverse Beacon Network at <http://reversebeacon.net>, now spotting

https://n1mmwp.hamdocs.com/manual-operating/single-operator-contesting/#single-operator-split-operation 73, Pete N4ZR Check out the Reverse Beacon Network at <http://reversebeacon.net>, now spotting R