I have dim memories of going through this a while back after installing a new device on the computer and it overwrote all the FTDI drivers previously installed and screwed up everything. I had to forc

It seems that all spots are lost if I close and quickly re-open Logger+. Is that just the way it is or is there a configuration switch to retain/recall the spots? Thanks & 73, Barry N1EU

Thanks, I think it's fine. 73, Barry N1EU

QSORDER has a continuous record mode option by specifying "-C" on the command line. Can someone please confirm that continuous mode will chunk the recording into one hour long mp3 files and not just o

I keep getting tripped up by Logger+'s behavior, but I'm not sure there's anything I can do about it. Perhaps somebody has an idea. I like to sort the Avail window by Direction and then grab successiv

Thanks Dave, this is VERY helpful! 73, Barry N1EU

Dave, could you please post the exact steps to do this in VSPE and which ports are the physical CAT port, which are the virtual ports and which ports are configured in the two CAT software programs? T

You need to use a cw interface device. What port is your cw interface device using? That's what you configure in the Configure-Ports section. Barry N1EU

I'm noticing different behavior between my Elecraft K3s and Flex 6500 when "PTT via Radio Command CW Mode" is checked. I have vox/qsk/breakin disabled on both radios. When I send a cw message on the K

I'd appreciate a reality check from other cw contesters out there. In another forum, I've gotten the impression that I'm the only guy in the world using Winkey PTT to keep my receiver muted during cw

Many folks asked about this and I've uploaded what Andy MW0MWZ provided to the files section of the Yahoo Groups site as indicated in the previous email. There should be enough info in the readme.txt

That would be fantastic Andy - thanks very much! 73, Barry N1EU

Thanks very much Andy for a fast and full response. I've cc'd the N1MM+ forum because folks there expressed interest. Although I have plenty of Web space and PHP support, I lack the scripting expertis

Are there any nifty methods of taking a contest log and all the recordings created by QSORDER and publish them on the Web so folks can look up their callsign and listen to their qso's with you? Thanks

Open Windows Explorer. Click on Libraries-Documents in the left pane Go to the search box in top right and enter "ZM4M" and hit Enter to perform search In the search results listing do you see: 1. Fol

Thanks Joe, I managed to figure that out but good tip. Still no audio thru USB Audio CODEC and soundcard works fine. And see the audio is being keyed when looking at Windows Sound Playback USB Audio C

Thanks Fred, I didn't. I've got Mic+Lin working fine with another soundcard but can't get the USB audio to play through. 73, Barry N1EU

Would appreciate any tips to getting the N1MM Logger+ soundcard voice keyer properly keying/driving my K3s via the internal USB soundcard. My USB-connected K3s is running fine with N1MM Logger+ and "U

If you right click on the icon labeled "My Documents" and look at its properties, you will see that the actual physical path is c:\Users\XXXX\Documents. The physical folder "Documents" is the same as

Yes, but the path to the share on the other computer will not conform to what Logger+ wants. (thanks for all the responses!) 73, Barry N1EU