I notice that to edit network computer addresses you have to click on Edit Computer Adresses. Then you get a window named Edit Networked Computer Names. If you are going to edit this in the N1MM logge

There must be a file that specifies the position of whis window on your PC. Tried to rename my layout file, but my old layout reappeared. This might be a problem when you change from two monitors to o

What RigExpert? If it is an old one, like Standard, TI-5 you have to find port more or less manually. I have a TI-7, and that is much easier. The included RigExpert Navigator software helps a lot. 73

Voicing serial number and frequency works all right, but making sent report audible the same way seems to be impossible. Is this a feature just for CQ and digital modes? /e de LA9RY Knut Meland

Thanks, guys! I thought it might be that way. 73 de Knut LA9RY

Clicking on RIT in the upper left corner of the bandmap window is supposed to toggle RIT on/off on the radio. This does not happen on my IC-756PROIII. If I turn RIT on using the RIT button on the radi

The odd thing is that this error occurs only when I use CTRL+Page down or page up.in order to change band. If I write a frequency in the entry window it works all right. Also: The error does not occur

The odd thing is that this error occurs only when I use CTRL+Page down or page up.in order to change band. If I write a frequency in the entry window it works all right. ALso: The error does not occur

This is what happens: I am on 14082 RTTY, using MMTTY in FSK mode with my IC-756proII. All is OK. I change to 40 meters (Ctrl-pgdown). Radio goes to 7040 RTTY mode AND STARTS TO TRANSMIT. Error messag

Problem solved. Right click on function keys in Entry window, window pops up Click file Choose import Works! 73 de Knut LA9RY

You are right, Bob. I was not aware of that feature, using the macro editor. But anyway, using the macro editor import window does not show the same files as the file explorer. I don't know why. Have

I try to download and install the BARTGRTTYS.mc file for the contest today. The problem is that the file is not visible from tha appropriate window in N1MM Logger plus (Associated files). The default

In IC-756 PRO there is a RTTY/twin peak filter (manual, page 45). You can set this to different widths and choose a default value. Did you try this? 73 de Knut, LA9RY

Try FSK mode in RTTY? On my 756 proIII that was the solution. Then RTTY filter is default ON. 73 LA9RY Knut Den 27.08.2016 17:53, skrev 'Carol Richards' n2mm@... [N1MMLoggerplus]:

I try to set Region 1 bandplans in my installation. 7200 kHz is the upper limit on 40 and 3800 kHz is the upper on 80. I set this using the bandplan window and right click to set max freq for SSB. It

Right click in the frequency scale in bandplan should be the way to set a max freq for cq, digital and ssb. I tried this several times, but the old values appear each time I reload the L+. This used t

You can work in SPLIT mode, one VFO in LSB, one in RTTY mode. It’s OK as long as you run, but not good for working S&P. I would prefer FSK mode. 73 de Knut LA9RY

Thanks, Gregg, that might have helped. Error disappeared – so far. 73 de LA9RY Knut

Tried reboot. No program using com port were running after reboot. Started Logger plus. Same error message appeared after checking config in Logger plus. “Com 4 is in use......” Have to clean up. But

After changing values in config I get this error message: "Com 4 (that is my PTT port) is in use by another program, but the port is also configured in N1MM logger. The com port will not work in N1MM