Serge Right click on the Entry Window and make sure the Show Band Panel is checked. If not it will not show.. 73 Rick N2AMG

It sounds like it is off screen. Shut down N1MM and go to the folder that MMTTY is installed in. Delete the file MMTTY.ini or you can edit it and look for the [Window] section and you will want to mak

That is because of the dots. The call validity routine didn’t detect it as a valid call. When you clicked on it the dots were stripped and then the entry window was able to show it as a dupe. 73 Rick

Are you sure the Logger is in PSK31 mode. Type PSK31 in the callsign window and the logger should switch to Digital mode and also be in PSK31. 73 Rick N2AMG

This error is usually taken care of by running the logger using the “Run as Administrator” setting by either right clicking on the main.exe file or right click and select Properties then Compatibility

Go to the directory where you have 2-tone installed and open the 2Tone.ini file. Someplace in the .ini file you will see Top=xxxxx and Left=xxxxx change both of the xxxxx values to 100 then save and c

Hi Craig.. Dueling CQ has worked this way since July of 2015 and this is the first anyone has said they wanted it the same as CW and SSB. This was requested a number of times in Feature requests so I

Hi Phil.. What do you find to messy when using it?? For me its this… Click call one. Click call 2, call 2 is moved to the stack. Work call 1 enter his info then your logthenpop macro should be highlig

Hi Phil.. . Having to Alt Left Click on subsequent calls can get messy Why would you need to Alt-Left Click? If you have LOGThenPOP turned on and configured all you need to do is left click on a calls

Hi Phil.. I just checked and everything is working correctly so make sure you have these 3 things set. 1. The logger is in Run mode 2. On the Digital Window Setup Dropdown. About ¾ of the way down the

Nothing has changed with the LOGTHENPOP routines since they were written during the creation of N1MM+. I think you are probably using a different selection for how mults come off the stack. The calls

Dave.. I have looked into this and have been unable to duplicate this. I spent almost the entire contest 2 weeks ago trying to make this happen and was unable to do so. Send me your .ini file so I can

If you can catch this I would like a screenshot of your whole desktop whit the transposed text in place.. 73 Rick N2AMG

There was already a trap in the mousemove event that If a linefeed, newline or cr/linefeed was detected in the text under the mouse it would ignore those characters. I have added a second trap just be

By any chance do any of you that have the transposed numbers have the text log turned on?? I want to see if the numbers in the text log are transposed also.. 73 Rick N2AMG

Its located on the setup menu about half way down. Output RX window to Text File. 73 Rick N2AMG

I should have been a little bit clearer on my request.. There are actually 2 ways to save the RX text to a file.. One way of doing it is thru MMTTY. On one o of the MMTTY menus there is Output RX Text

There is one other fix that I failed to add to the list.. EARTTY: Correct RT error With-Block Error. (Coded by N2AMG)

Hi Bill.. No there is not. If you type calls in the text window they will be in lower case but in the entry window all the calls get converted to uppercase. I also wanted to see if there was a big dif

Neil.. Is Fldigi installed outside of the program files structure?? Have you tried running N1MM using the right click “Run as Administrator” setting. No work has been done on the Fldigi code in about