Date   
Suggestion: Label Active Windows?

Rick Tavan
 

Although active Options have check boxes in the Options drop-down menu, active Windows do not have check boxes or marks in the Windows drop-down menu. This has recently become a problem for me because I have been working with various multi-monitor configurations and Windows 10 seems to lose track of the location of windows frequently when the monitor configuration changes. This causes Logger windows to "disappear." Also, when I mouse over the MM icon in the task bar, it only displays Entry Windows, not all the others. The net is that I can't see some windows, can't tell whether they are active or not, and can't use the window-position recovery techniques that I use on other applications. It would be nice to know at least which windows Logger is trying to display. Not a big deal, but the next time surgery is performed on the Windows drop-down, some check marks would be nice to have.

Thanks,

/Rick N6XI

--

Rick Tavan
Truckee, CA

VOLTA RY Scoring?

Hank Garretson
 

Contest type VOLTARTTY

V1.0.7170.0

Either I'm doing something wrong or ???

Not getting any QSO points for 6-land Zone-3 contacts.



Maybe http://www.contestvolta.com/point%20table.htm is outdated, but can't imagine that QSO points should be zero.

Maybe I'm misreading rules.

Contest Exuberantly,

Hank, W6SX

Re: N1MM fails to start. No message on screen.

John Bednar
 

Bob,

 

Is this a new install?

 

John, K3CT

 

From: N1MMLoggerPlus@groups.io [mailto:N1MMLoggerPlus@groups.io] On Behalf Of Bob Turner
Sent: Saturday, May 12, 2018 3:14 PM
To: N1MMLoggerPlus@groups.io
Subject: [N1MMLoggerPlus] N1MM fails to start. No message on screen.

 

I’m getting ready for June VHF.  N1MM fails to start.  No error message on screen.  I extracted this from Windows Application log.  I was thinking about uninstall / reinstall but perhaps there is a better way?

 

7 3  Bob

N2SCJ

 

App log follows---------------------------------------

 

Log Name:      Application

Source:        Windows Error Reporting

Date:          5/12/2018 3:08:07 PM

Event ID:      1001

Task Category: None

Level:         Information

Keywords:      Classic

User:          N/A

Computer:      I3

Description:

Fault bucket 1662346856206063835, type 5

Event Name: CLR20r3

Response: Not available

Cab Id: 0

 

Problem signature:

P1: N1MMLogger.net.exe

P2: 1.0.7147.0

P3: 5ac60004

P4: mscorlib

P5: 4.7.2650.0

P6: 5ab1cc12

P7: 1672

P8: 219

P9: System.IO.IOException

P10:

 

Attached files:

\\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER4B87.tmp.mdmp

\\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER4C73.tmp.WERInternalMetadata.xml

\\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER4C83.tmp.csv

\\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER4C93.tmp.txt

 

These files may be available here:

C:\ProgramData\Microsoft\Windows\WER\ReportArchive\AppCrash_N1MMLogger.net.e_a8a1e4e5abed2ed54e9df19ee8e52e4d41e64660_fbdde670_093e5078

 

Analysis symbol:

Rechecking for solution: 0

Report Id: 57f12cba-5edf-4956-b876-3182caa9ea08

Report Status: 268435456

Hashed bucket: fbcaf3ef94aeb5d9a711d7a881a658db

Event Xml:

<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">

  <System>

    <Provider Name="Windows Error Reporting" />

    <EventID Qualifiers="0">1001</EventID>

    <Level>4</Level>

    <Task>0</Task>

    <Keywords>0x80000000000000</Keywords>

    <TimeCreated SystemTime="2018-05-12T19:08:07.138031200Z" />

    <EventRecordID>43500</EventRecordID>

    <Channel>Application</Channel>

    <Computer>I3</Computer>

    <Security />

  </System>

  <EventData>

    <Data>1662346856206063835</Data>

    <Data>5</Data>

    <Data>CLR20r3</Data>

    <Data>Not available</Data>

    <Data>0</Data>

    <Data>N1MMLogger.net.exe</Data>

    <Data>1.0.7147.0</Data>

    <Data>5ac60004</Data>

    <Data>mscorlib</Data>

    <Data>4.7.2650.0</Data>

    <Data>5ab1cc12</Data>

    <Data>1672</Data>

    <Data>219</Data>

    <Data>System.IO.IOException</Data>

    <Data>

    </Data>

    <Data>

\\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER4B87.tmp.mdmp

\\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER4C73.tmp.WERInternalMetadata.xml

\\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER4C83.tmp.csv

\\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER4C93.tmp.txt</Data>

    <Data>C:\ProgramData\Microsoft\Windows\WER\ReportArchive\AppCrash_N1MMLogger.net.e_a8a1e4e5abed2ed54e9df19ee8e52e4d41e64660_fbdde670_093e5078</Data>

    <Data>

    </Data>

    <Data>0</Data>

    <Data>57f12cba-5edf-4956-b876-3182caa9ea08</Data>

    <Data>268435456</Data>

    <Data>fbcaf3ef94aeb5d9a711d7a881a658db</Data>

  </EventData>

</Event>

Re: N1MM fails to start. No message on screen.

Bob Turner
 

John,

 

No.  It was first installed 2-3 years ago.   Windows 10 has been upgraded several times via the forced updates.  It is now at 1709, Build 16299.431 .

 

Bob

 

From: N1MMLoggerPlus@groups.io [mailto:N1MMLoggerPlus@groups.io] On Behalf Of John Bednar
Sent: Sunday, May 13, 2018 2:54 AM
To: N1MMLoggerPlus@groups.io
Subject: Re: [N1MMLoggerPlus] N1MM fails to start. No message on screen.

 

Bob,

 

Is this a new install?

 

John, K3CT

 

From: N1MMLoggerPlus@groups.io [mailto:N1MMLoggerPlus@groups.io] On Behalf Of Bob Turner
Sent: Saturday, May 12, 2018 3:14 PM
To: N1MMLoggerPlus@groups.io
Subject: [N1MMLoggerPlus] N1MM fails to start. No message on screen.

 

I’m getting ready for June VHF.  N1MM fails to start.  No error message on screen.  I extracted this from Windows Application log.  I was thinking about uninstall / reinstall but perhaps there is a better way?

 

7 3  Bob

N2SCJ

 

App log follows---------------------------------------

 

Log Name:      Application

Source:        Windows Error Reporting

Date:          5/12/2018 3:08:07 PM

Event ID:      1001

Task Category: None

Level:         Information

Keywords:      Classic

User:          N/A

Computer:      I3

Description:

Fault bucket 1662346856206063835, type 5

Event Name: CLR20r3

Response: Not available

Cab Id: 0

 

Problem signature:

P1: N1MMLogger.net.exe

P2: 1.0.7147.0

P3: 5ac60004

P4: mscorlib

P5: 4.7.2650.0

P6: 5ab1cc12

P7: 1672

P8: 219

P9: System.IO.IOException

P10:

 

Attached files:

\\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER4B87.tmp.mdmp

\\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER4C73.tmp.WERInternalMetadata.xml

\\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER4C83.tmp.csv

\\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER4C93.tmp.txt

 

These files may be available here:

C:\ProgramData\Microsoft\Windows\WER\ReportArchive\AppCrash_N1MMLogger.net.e_a8a1e4e5abed2ed54e9df19ee8e52e4d41e64660_fbdde670_093e5078

 

Analysis symbol:

Rechecking for solution: 0

Report Id: 57f12cba-5edf-4956-b876-3182caa9ea08

Report Status: 268435456

Hashed bucket: fbcaf3ef94aeb5d9a711d7a881a658db

Event Xml:

<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">

  <System>

    <Provider Name="Windows Error Reporting" />

    <EventID Qualifiers="0">1001</EventID>

    <Level>4</Level>

    <Task>0</Task>

    <Keywords>0x80000000000000</Keywords>

    <TimeCreated SystemTime="2018-05-12T19:08:07.138031200Z" />

    <EventRecordID>43500</EventRecordID>

    <Channel>Application</Channel>

    <Computer>I3</Computer>

    <Security />

  </System>

  <EventData>

    <Data>1662346856206063835</Data>

    <Data>5</Data>

    <Data>CLR20r3</Data>

    <Data>Not available</Data>

    <Data>0</Data>

    <Data>N1MMLogger.net.exe</Data>

    <Data>1.0.7147.0</Data>

    <Data>5ac60004</Data>

    <Data>mscorlib</Data>

    <Data>4.7.2650.0</Data>

    <Data>5ab1cc12</Data>

    <Data>1672</Data>

    <Data>219</Data>

    <Data>System.IO.IOException</Data>

    <Data>

    </Data>

    <Data>

\\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER4B87.tmp.mdmp

\\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER4C73.tmp.WERInternalMetadata.xml

\\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER4C83.tmp.csv

\\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER4C93.tmp.txt</Data>

    <Data>C:\ProgramData\Microsoft\Windows\WER\ReportArchive\AppCrash_N1MMLogger.net.e_a8a1e4e5abed2ed54e9df19ee8e52e4d41e64660_fbdde670_093e5078</Data>

    <Data>

    </Data>

    <Data>0</Data>

    <Data>57f12cba-5edf-4956-b876-3182caa9ea08</Data>

    <Data>268435456</Data>

    <Data>fbcaf3ef94aeb5d9a711d7a881a658db</Data>

  </EventData>

</Event>

Re: N1MM fails to start. No message on screen.

John Bednar
 

Bob,

 

I would rename the user N1MM Logger+ directory and start the program. The default location of the directory is MyDocuments. If the program starts your database file(s) are corrupt.

 

If it doesn’t start, the installation is damaged, likely from a computer scan or hardware issue. Rerun the Full Installer. There is no need to un-install. If the installer tells you to reboot, then restart the computer. Install the latest update before starting the program for the first time.

 

Make sure the database directory is located on the computer physical disk drive (not on a network share, cloud, USB disk, etc).

 

Some computer virus/security programs are known to damage the installation.

 

Never allow shadow backup of the database directory files when the program is running.

 

John, K3CT

 

 

From: N1MMLoggerPlus@groups.io [mailto:N1MMLoggerPlus@groups.io] On Behalf Of Bob Turner
Sent: Sunday, May 13, 2018 6:03 AM
To: N1MMLoggerPlus@groups.io
Subject: Re: [N1MMLoggerPlus] N1MM fails to start. No message on screen.

 

John,

 

No.  It was first installed 2-3 years ago.   Windows 10 has been upgraded several times via the forced updates.  It is now at 1709, Build 16299.431 .

 

Bob

 

From: N1MMLoggerPlus@groups.io [mailto:N1MMLoggerPlus@groups.io] On Behalf Of John Bednar
Sent: Sunday, May 13, 2018 2:54 AM
To: N1MMLoggerPlus@groups.io
Subject: Re: [N1MMLoggerPlus] N1MM fails to start. No message on screen.

 

Bob,

 

Is this a new install?

 

John, K3CT

 

From: N1MMLoggerPlus@groups.io [mailto:N1MMLoggerPlus@groups.io] On Behalf Of Bob Turner
Sent: Saturday, May 12, 2018 3:14 PM
To: N1MMLoggerPlus@groups.io
Subject: [N1MMLoggerPlus] N1MM fails to start. No message on screen.

 

I’m getting ready for June VHF.  N1MM fails to start.  No error message on screen.  I extracted this from Windows Application log.  I was thinking about uninstall / reinstall but perhaps there is a better way?

 

7 3  Bob

N2SCJ

 

App log follows---------------------------------------

 

Log Name:      Application

Source:        Windows Error Reporting

Date:          5/12/2018 3:08:07 PM

Event ID:      1001

Task Category: None

Level:         Information

Keywords:      Classic

User:          N/A

Computer:      I3

Description:

Fault bucket 1662346856206063835, type 5

Event Name: CLR20r3

Response: Not available

Cab Id: 0

 

Problem signature:

P1: N1MMLogger.net.exe

P2: 1.0.7147.0

P3: 5ac60004

P4: mscorlib

P5: 4.7.2650.0

P6: 5ab1cc12

P7: 1672

P8: 219

P9: System.IO.IOException

P10:

 

Attached files:

\\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER4B87.tmp.mdmp

\\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER4C73.tmp.WERInternalMetadata.xml

\\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER4C83.tmp.csv

\\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER4C93.tmp.txt

 

These files may be available here:

C:\ProgramData\Microsoft\Windows\WER\ReportArchive\AppCrash_N1MMLogger.net.e_a8a1e4e5abed2ed54e9df19ee8e52e4d41e64660_fbdde670_093e5078

 

Analysis symbol:

Rechecking for solution: 0

Report Id: 57f12cba-5edf-4956-b876-3182caa9ea08

Report Status: 268435456

Hashed bucket: fbcaf3ef94aeb5d9a711d7a881a658db

Event Xml:

<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">

  <System>

    <Provider Name="Windows Error Reporting" />

    <EventID Qualifiers="0">1001</EventID>

    <Level>4</Level>

    <Task>0</Task>

    <Keywords>0x80000000000000</Keywords>

    <TimeCreated SystemTime="2018-05-12T19:08:07.138031200Z" />

    <EventRecordID>43500</EventRecordID>

    <Channel>Application</Channel>

    <Computer>I3</Computer>

    <Security />

  </System>

  <EventData>

    <Data>1662346856206063835</Data>

    <Data>5</Data>

    <Data>CLR20r3</Data>

    <Data>Not available</Data>

    <Data>0</Data>

    <Data>N1MMLogger.net.exe</Data>

    <Data>1.0.7147.0</Data>

    <Data>5ac60004</Data>

    <Data>mscorlib</Data>

    <Data>4.7.2650.0</Data>

    <Data>5ab1cc12</Data>

    <Data>1672</Data>

    <Data>219</Data>

    <Data>System.IO.IOException</Data>

    <Data>

    </Data>

    <Data>

\\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER4B87.tmp.mdmp

\\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER4C73.tmp.WERInternalMetadata.xml

\\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER4C83.tmp.csv

\\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER4C93.tmp.txt</Data>

    <Data>C:\ProgramData\Microsoft\Windows\WER\ReportArchive\AppCrash_N1MMLogger.net.e_a8a1e4e5abed2ed54e9df19ee8e52e4d41e64660_fbdde670_093e5078</Data>

    <Data>

    </Data>

    <Data>0</Data>

    <Data>57f12cba-5edf-4956-b876-3182caa9ea08</Data>

    <Data>268435456</Data>

    <Data>fbcaf3ef94aeb5d9a711d7a881a658db</Data>

  </EventData>

</Event>

Re: N1MM fails to start. No message on screen.

Bob Turner
 

John,

 

I’ll try that.  I have no data to save.  I exported and imported into my general logger at end of last contest.

 

Bob

 

From: N1MMLoggerPlus@groups.io [mailto:N1MMLoggerPlus@groups.io] On Behalf Of John Bednar
Sent: Sunday, May 13, 2018 6:26 AM
To: N1MMLoggerPlus@groups.io
Subject: Re: [N1MMLoggerPlus] N1MM fails to start. No message on screen.

 

Bob,

 

I would rename the user N1MM Logger+ directory and start the program. The default location of the directory is MyDocuments. If the program starts your database file(s) are corrupt.

 

If it doesn’t start, the installation is damaged, likely from a computer scan or hardware issue. Rerun the Full Installer. There is no need to un-install. If the installer tells you to reboot, then restart the computer. Install the latest update before starting the program for the first time.

 

Make sure the database directory is located on the computer physical disk drive (not on a network share, cloud, USB disk, etc).

 

Some computer virus/security programs are known to damage the installation.

 

Never allow shadow backup of the database directory files when the program is running.

 

John, K3CT

 

 

From: N1MMLoggerPlus@groups.io [mailto:N1MMLoggerPlus@groups.io] On Behalf Of Bob Turner
Sent: Sunday, May 13, 2018 6:03 AM
To: N1MMLoggerPlus@groups.io
Subject: Re: [N1MMLoggerPlus] N1MM fails to start. No message on screen.

 

John,

 

No.  It was first installed 2-3 years ago.   Windows 10 has been upgraded several times via the forced updates.  It is now at 1709, Build 16299.431 .

 

Bob

 

From: N1MMLoggerPlus@groups.io [mailto:N1MMLoggerPlus@groups.io] On Behalf Of John Bednar
Sent: Sunday, May 13, 2018 2:54 AM
To: N1MMLoggerPlus@groups.io
Subject: Re: [N1MMLoggerPlus] N1MM fails to start. No message on screen.

 

Bob,

 

Is this a new install?

 

John, K3CT

 

From: N1MMLoggerPlus@groups.io [mailto:N1MMLoggerPlus@groups.io] On Behalf Of Bob Turner
Sent: Saturday, May 12, 2018 3:14 PM
To: N1MMLoggerPlus@groups.io
Subject: [N1MMLoggerPlus] N1MM fails to start. No message on screen.

 

I’m getting ready for June VHF.  N1MM fails to start.  No error message on screen.  I extracted this from Windows Application log.  I was thinking about uninstall / reinstall but perhaps there is a better way?

 

7 3  Bob

N2SCJ

 

App log follows---------------------------------------

 

Log Name:      Application

Source:        Windows Error Reporting

Date:          5/12/2018 3:08:07 PM

Event ID:      1001

Task Category: None

Level:         Information

Keywords:      Classic

User:          N/A

Computer:      I3

Description:

Fault bucket 1662346856206063835, type 5

Event Name: CLR20r3

Response: Not available

Cab Id: 0

 

Problem signature:

P1: N1MMLogger.net.exe

P2: 1.0.7147.0

P3: 5ac60004

P4: mscorlib

P5: 4.7.2650.0

P6: 5ab1cc12

P7: 1672

P8: 219

P9: System.IO.IOException

P10:

 

Attached files:

\\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER4B87.tmp.mdmp

\\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER4C73.tmp.WERInternalMetadata.xml

\\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER4C83.tmp.csv

\\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER4C93.tmp.txt

 

These files may be available here:

C:\ProgramData\Microsoft\Windows\WER\ReportArchive\AppCrash_N1MMLogger.net.e_a8a1e4e5abed2ed54e9df19ee8e52e4d41e64660_fbdde670_093e5078

 

Analysis symbol:

Rechecking for solution: 0

Report Id: 57f12cba-5edf-4956-b876-3182caa9ea08

Report Status: 268435456

Hashed bucket: fbcaf3ef94aeb5d9a711d7a881a658db

Event Xml:

<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">

  <System>

    <Provider Name="Windows Error Reporting" />

    <EventID Qualifiers="0">1001</EventID>

    <Level>4</Level>

    <Task>0</Task>

    <Keywords>0x80000000000000</Keywords>

    <TimeCreated SystemTime="2018-05-12T19:08:07.138031200Z" />

    <EventRecordID>43500</EventRecordID>

    <Channel>Application</Channel>

    <Computer>I3</Computer>

    <Security />

  </System>

  <EventData>

    <Data>1662346856206063835</Data>

    <Data>5</Data>

    <Data>CLR20r3</Data>

    <Data>Not available</Data>

    <Data>0</Data>

    <Data>N1MMLogger.net.exe</Data>

    <Data>1.0.7147.0</Data>

    <Data>5ac60004</Data>

    <Data>mscorlib</Data>

    <Data>4.7.2650.0</Data>

    <Data>5ab1cc12</Data>

    <Data>1672</Data>

    <Data>219</Data>

    <Data>System.IO.IOException</Data>

    <Data>

    </Data>

    <Data>

\\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER4B87.tmp.mdmp

\\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER4C73.tmp.WERInternalMetadata.xml

\\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER4C83.tmp.csv

\\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER4C93.tmp.txt</Data>

    <Data>C:\ProgramData\Microsoft\Windows\WER\ReportArchive\AppCrash_N1MMLogger.net.e_a8a1e4e5abed2ed54e9df19ee8e52e4d41e64660_fbdde670_093e5078</Data>

    <Data>

    </Data>

    <Data>0</Data>

    <Data>57f12cba-5edf-4956-b876-3182caa9ea08</Data>

    <Data>268435456</Data>

    <Data>fbcaf3ef94aeb5d9a711d7a881a658db</Data>

  </EventData>

</Event>

Re: N1MM fails to start. No message on screen.

Bob Turner
 

John,

 

I renamed.  It went further with “A runtime error occurred during error processing” .  That message is below, but I think may get stripped out.

 

 

Running the Full Installer, boot, Run Updater worked on 2nd try.    First time it hung trying to go to a non-existent file server (that was my clue).  I told it c:\N1MM Logger+ instead.    It created it, but it’s still empty.   It did find my old databases in the Docs folder.   While running installer it was trying to go to a non-existent file server which I rebuilt under a new name months ago.  \\FS2\Docs versus \\FS1\Docs.    Windows document folder is redirected there.  Changing File Server name probably was the root cause.  Rather than go to the docs folder, it insisted to going to the location of the old docs folder.  Had it simply looked at whatever Docs was pointing at it would have worked.  Not sure if that is a Windows issue or N1MM, but it’s a minor issue now that I know about it.

 

Thanks for your help.

 

Bob

 

 

 

From: N1MMLoggerPlus@groups.io [mailto:N1MMLoggerPlus@groups.io] On Behalf Of Bob Turner
Sent: Sunday, May 13, 2018 6:48 AM
To: N1MMLoggerPlus@groups.io
Subject: Re: [N1MMLoggerPlus] N1MM fails to start. No message on screen.

 

John,

 

I’ll try that.  I have no data to save.  I exported and imported into my general logger at end of last contest.

 

Bob

 

From: N1MMLoggerPlus@groups.io [mailto:N1MMLoggerPlus@groups.io] On Behalf Of John Bednar
Sent: Sunday, May 13, 2018 6:26 AM
To:
N1MMLoggerPlus@groups.io
Subject: Re: [N1MMLoggerPlus] N1MM fails to start. No message on screen.

 

Bob,

 

I would rename the user N1MM Logger+ directory and start the program. The default location of the directory is MyDocuments. If the program starts your database file(s) are corrupt.

 

If it doesn’t start, the installation is damaged, likely from a computer scan or hardware issue. Rerun the Full Installer. There is no need to un-install. If the installer tells you to reboot, then restart the computer. Install the latest update before starting the program for the first time.

 

Make sure the database directory is located on the computer physical disk drive (not on a network share, cloud, USB disk, etc).

 

Some computer virus/security programs are known to damage the installation.

 

Never allow shadow backup of the database directory files when the program is running.

 

John, K3CT

 

 

From: N1MMLoggerPlus@groups.io [mailto:N1MMLoggerPlus@groups.io] On Behalf Of Bob Turner
Sent: Sunday, May 13, 2018 6:03 AM
To:
N1MMLoggerPlus@groups.io
Subject: Re: [N1MMLoggerPlus] N1MM fails to start. No message on screen.

 

John,

 

No.  It was first installed 2-3 years ago.   Windows 10 has been upgraded several times via the forced updates.  It is now at 1709, Build 16299.431 .

 

Bob

 

From: N1MMLoggerPlus@groups.io [mailto:N1MMLoggerPlus@groups.io] On Behalf Of John Bednar
Sent: Sunday, May 13, 2018 2:54 AM
To:
N1MMLoggerPlus@groups.io
Subject: Re: [N1MMLoggerPlus] N1MM fails to start. No message on screen.

 

Bob,

 

Is this a new install?

 

John, K3CT

 

From: N1MMLoggerPlus@groups.io [mailto:N1MMLoggerPlus@groups.io] On Behalf Of Bob Turner
Sent: Saturday, May 12, 2018 3:14 PM
To:
N1MMLoggerPlus@groups.io
Subject: [N1MMLoggerPlus] N1MM fails to start. No message on screen.

 

I’m getting ready for June VHF.  N1MM fails to start.  No error message on screen.  I extracted this from Windows Application log.  I was thinking about uninstall / reinstall but perhaps there is a better way?

 

7 3  Bob

N2SCJ

 

App log follows---------------------------------------

 

Log Name:      Application

Source:        Windows Error Reporting

Date:          5/12/2018 3:08:07 PM

Event ID:      1001

Task Category: None

Level:         Information

Keywords:      Classic

User:          N/A

Computer:      I3

Description:

Fault bucket 1662346856206063835, type 5

Event Name: CLR20r3

Response: Not available

Cab Id: 0

 

Problem signature:

P1: N1MMLogger.net.exe

P2: 1.0.7147.0

P3: 5ac60004

P4: mscorlib

P5: 4.7.2650.0

P6: 5ab1cc12

P7: 1672

P8: 219

P9: System.IO.IOException

P10:

 

Attached files:

\\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER4B87.tmp.mdmp

\\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER4C73.tmp.WERInternalMetadata.xml

\\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER4C83.tmp.csv

\\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER4C93.tmp.txt

 

These files may be available here:

C:\ProgramData\Microsoft\Windows\WER\ReportArchive\AppCrash_N1MMLogger.net.e_a8a1e4e5abed2ed54e9df19ee8e52e4d41e64660_fbdde670_093e5078

 

Analysis symbol:

Rechecking for solution: 0

Report Id: 57f12cba-5edf-4956-b876-3182caa9ea08

Report Status: 268435456

Hashed bucket: fbcaf3ef94aeb5d9a711d7a881a658db

Event Xml:

<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">

  <System>

    <Provider Name="Windows Error Reporting" />

    <EventID Qualifiers="0">1001</EventID>

    <Level>4</Level>

    <Task>0</Task>

    <Keywords>0x80000000000000</Keywords>

    <TimeCreated SystemTime="2018-05-12T19:08:07.138031200Z" />

    <EventRecordID>43500</EventRecordID>

    <Channel>Application</Channel>

    <Computer>I3</Computer>

    <Security />

  </System>

  <EventData>

    <Data>1662346856206063835</Data>

    <Data>5</Data>

    <Data>CLR20r3</Data>

    <Data>Not available</Data>

    <Data>0</Data>

    <Data>N1MMLogger.net.exe</Data>

    <Data>1.0.7147.0</Data>

    <Data>5ac60004</Data>

    <Data>mscorlib</Data>

    <Data>4.7.2650.0</Data>

    <Data>5ab1cc12</Data>

    <Data>1672</Data>

    <Data>219</Data>

    <Data>System.IO.IOException</Data>

    <Data>

    </Data>

    <Data>

\\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER4B87.tmp.mdmp

\\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER4C73.tmp.WERInternalMetadata.xml

\\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER4C83.tmp.csv

\\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER4C93.tmp.txt</Data>

    <Data>C:\ProgramData\Microsoft\Windows\WER\ReportArchive\AppCrash_N1MMLogger.net.e_a8a1e4e5abed2ed54e9df19ee8e52e4d41e64660_fbdde670_093e5078</Data>

    <Data>

    </Data>

    <Data>0</Data>

    <Data>57f12cba-5edf-4956-b876-3182caa9ea08</Data>

    <Data>268435456</Data>

    <Data>fbcaf3ef94aeb5d9a711d7a881a658db</Data>

  </EventData>

</Event>

QSO Recorder

Dennis W1UE
 

Downloaded and installed the latest version of QSO Recorder this morning.  I thought I would update everything prior to my trip to HR9 for the CQWW WPX CW contest.  (Shameless plug- we'll be on as HQ9X, Multi-2, from Roatan Island, Honduras).

Placed it in the Documents\N1MM Logger+\QSORecording folder.

When I try to run it, I get an error: "The code execution cannot proceed because
VCRUNTIME140.dll was not found.  Reinstalling the program may fix this problem."

So I reinstalled, same error, Reinstalled again in a different folder, same error.  All installs
done as an administrator.

Hoping someone can help with this issue.  I spent about 2 hours on it this morning, and other than this email got no closer to figuring out how to fix it.

Dennis W1UE



Use of USB ports

Dennis W1UE
 

I will be part of a small DXpedition to HQ9X for the WPX CW contest.  Since the laptop I'm bringing has only two working USB ports and I do have a powered USB port extender, what's the best way to set up the ports?

I have to connect:
USB radio cable (for an IC7610- audio codec also used)
USB cable for Winkey
USB port for wireless mouse

Since I only have two working USB ports, the USB port extender will require the use of one of the USB ports.  Obtaining a new laptop is not an option. 

What should be plugged directly into the radio, and what should be plugged into the USB hub?  Does it make a difference?

Dennis W1UE

Re: QSO Recorder

Ted Bryant
 

Dennis,

 

Try this. Unzip the attached.  Using Win7 Pro here, It was found in the Windows/System32 directory.  You will need to register the dll.

 

HTH

 

73, Ted W4NZ

 

 

 

From: N1MMLoggerPlus@groups.io [mailto:N1MMLoggerPlus@groups.io] On Behalf Of Dennis Egan
Sent: Sunday, May 13, 2018 9:16 AM
To: N1MMLoggerplus@groups.io
Subject: [N1MMLoggerPlus] QSO Recorder

 

Downloaded and installed the latest version of QSO Recorder this morning.  I thought I would update everything prior to my trip to HR9 for the CQWW WPX CW contest.  (Shameless plug- we'll be on as HQ9X, Multi-2, from Roatan Island, Honduras).

Placed it in the Documents\N1MM Logger+\QSORecording folder.

When I try to run it, I get an error: "The code execution cannot proceed because
VCRUNTIME140.dll was not found.  Reinstalling the program may fix this problem."

So I reinstalled, same error, Reinstalled again in a different folder, same error.  All installs
done as an administrator.

Hoping someone can help with this issue.  I spent about 2 hours on it this morning, and other than this email got no closer to figuring out how to fix it.

Dennis W1UE


Re: Use of USB ports

John Bednar
 

Dennis,

 

I would connect the radio USB cable directly to the computer. This will eliminate the delay in the most demanding data path.  

 

Place the mouse and WinKey on the USB hub. Make sure you test everything well before you leave.

 

Make sure you disable the Windows USB port power down.

 

John, K3CT

 

From: N1MMLoggerPlus@groups.io [mailto:N1MMLoggerPlus@groups.io] On Behalf Of Dennis Egan
Sent: Sunday, May 13, 2018 9:24 AM
To: N1MMLoggerplus@groups.io
Subject: [N1MMLoggerPlus] Use of USB ports

 

I will be part of a small DXpedition to HQ9X for the WPX CW contest.  Since the laptop I'm bringing has only two working USB ports and I do have a powered USB port extender, what's the best way to set up the ports?

I have to connect:
USB radio cable (for an IC7610- audio codec also used)
USB cable for Winkey
USB port for wireless mouse

Since I only have two working USB ports, the USB port extender will require the use of one of the USB ports.  Obtaining a new laptop is not an option. 

What should be plugged directly into the radio, and what should be plugged into the USB hub?  Does it make a difference?

Dennis W1UE

Re: Use of USB ports

Tom Wagner (N1MM)
 

I would start with the configuration that John recommends.  Additionally, I would bring 2-3 extenders in case they are susceptible to RFI.  I'd focus on those with very short connector cables. Also, bring 2.4" #43 or #31 ferrite cores to help with RFI supression.

Good luck!

Tom - N1MM

On 5/13/2018 10:06 AM, John Bednar wrote:

Dennis,

I would connect the radio USB cable directly to the computer. This will eliminate the delay in the most demanding data path.

Place the mouse and WinKey on the USB hub. Make sure you test everything well before you leave.

Make sure you disable the Windows USB port power down.

John, K3CT

*From:*N1MMLoggerPlus@groups.io [mailto:N1MMLoggerPlus@groups.io] *On Behalf Of *Dennis Egan
*Sent:* Sunday, May 13, 2018 9:24 AM
*To:* N1MMLoggerplus@groups.io
*Subject:* [N1MMLoggerPlus] Use of USB ports

I will be part of a small DXpedition to HQ9X for the WPX CW contest. Since the laptop I'm bringing has only two working USB ports and I do have a powered USB port extender, what's the best way to set up the ports?

I have to connect:
USB radio cable (for an IC7610- audio codec also used)
USB cable for Winkey
USB port for wireless mouse

Since I only have two working USB ports, the USB port extender will require the use of one of the USB ports. Obtaining a new laptop is not an option.

What should be plugged directly into the radio, and what should be plugged into the USB hub?  Does it make a difference?

Dennis W1UE

Re: QSO Recorder

Vasiliy --
 

Dennis 

Please try to download and install Visual C redistributable package for 32 Bit from Microsoft

73 Vasiliy

On Sun, May 13, 2018, 09:15 Dennis Egan <egan.dennis88@...> wrote:
Downloaded and installed the latest version of QSO Recorder this morning.  I thought I would update everything prior to my trip to HR9 for the CQWW WPX CW contest.  (Shameless plug- we'll be on as HQ9X, Multi-2, from Roatan Island, Honduras).

Placed it in the Documents\N1MM Logger+\QSORecording folder.

When I try to run it, I get an error: "The code execution cannot proceed because
VCRUNTIME140.dll was not found.  Reinstalling the program may fix this problem."

So I reinstalled, same error, Reinstalled again in a different folder, same error.  All installs
done as an administrator.

Hoping someone can help with this issue.  I spent about 2 hours on it this morning, and other than this email got no closer to figuring out how to fix it.

Dennis W1UE



Re: Use of USB ports

GIWagner@k5kg.com
 

Dennis, I always use a full size keyboard when I’m operating with a laptop. Its much easier to run a fast pileup with the full size kbd. (I use a Logitech wireless kbd/mouse combo.)

73, George K5KG

On May 13, 2018, at 09:17, Tom Wagner (N1MM) <n1mmtomwagner@...> wrote:

I would start with the configuration that John recommends. Additionally, I would bring 2-3 extenders in case they are susceptible to RFI. I'd focus on those with very short connector cables. Also, bring 2.4" #43 or #31 ferrite cores to help with RFI supression.

Good luck!

Tom - N1MM


On 5/13/2018 10:06 AM, John Bednar wrote:

Dennis,

I would connect the radio USB cable directly to the computer. This will eliminate the delay in the most demanding data path.

Place the mouse and WinKey on the USB hub. Make sure you test everything well before you leave.

Make sure you disable the Windows USB port power down.

John, K3CT

*From:*N1MMLoggerPlus@groups.io [mailto:N1MMLoggerPlus@groups.io] *On Behalf Of *Dennis Egan
*Sent:* Sunday, May 13, 2018 9:24 AM
*To:* N1MMLoggerplus@groups.io
*Subject:* [N1MMLoggerPlus] Use of USB ports

I will be part of a small DXpedition to HQ9X for the WPX CW contest. Since the laptop I'm bringing has only two working USB ports and I do have a powered USB port extender, what's the best way to set up the ports?

I have to connect:
USB radio cable (for an IC7610- audio codec also used)
USB cable for Winkey
USB port for wireless mouse

Since I only have two working USB ports, the USB port extender will require the use of one of the USB ports. Obtaining a new laptop is not an option.

What should be plugged directly into the radio, and what should be plugged into the USB hub? Does it make a difference?

Dennis W1UE


Re: QSO Recorder

Jeff Clarke
 

Dennis,

Why not just use Audacity? No USB ports required. Just plug the speaker out from the radio to the mic in on your laptop. I used this to record my PJ4A effort in CQWW DX CW and it worked great.

Jeff


On 5/13/2018 9:15 AM, Dennis Egan wrote:
Downloaded and installed the latest version of QSO Recorder this morning.  I thought I would update everything prior to my trip to HR9 for the CQWW WPX CW contest.  (Shameless plug- we'll be on as HQ9X, Multi-2, from Roatan Island, Honduras).

Placed it in the Documents\N1MM Logger+\QSORecording folder.

When I try to run it, I get an error: "The code execution cannot proceed because
VCRUNTIME140.dll was not found.  Reinstalling the program may fix this problem."

So I reinstalled, same error, Reinstalled again in a different folder, same error.  All installs
done as an administrator.

Hoping someone can help with this issue.  I spent about 2 hours on it this morning, and other than this email got no closer to figuring out how to fix it.

Dennis W1UE




--
Jeff Clarke
Information Technology Professional
Ellerslie, Georgia

My LinkedIn Profile

Re: QSO Recorder

Gerry Hull
 


Install the VC2015 runtime from the link above.

73 Gerry W1VE



On Sun, May 13, 2018, 9:15 AM Dennis Egan <egan.dennis88@...> wrote:
Downloaded and installed the latest version of QSO Recorder this morning.  I thought I would update everything prior to my trip to HR9 for the CQWW WPX CW contest.  (Shameless plug- we'll be on as HQ9X, Multi-2, from Roatan Island, Honduras).

Placed it in the Documents\N1MM Logger+\QSORecording folder.

When I try to run it, I get an error: "The code execution cannot proceed because
VCRUNTIME140.dll was not found.  Reinstalling the program may fix this problem."

So I reinstalled, same error, Reinstalled again in a different folder, same error.  All installs
done as an administrator.

Hoping someone can help with this issue.  I spent about 2 hours on it this morning, and other than this email got no closer to figuring out how to fix it.

Dennis W1UE



Re: VOLTA RY Scoring?

Rick Ellison
 

Hank..

Look at those qso’s and see if the mode is different with those qso’s. I just tried switching my zone to 3 and was able to log 6 area calls in zone 3 with no trouble and the correct points were issued.

 

The other thing to check is open the Exchpoints.sec file and look for the line that starts with 0303 and make sure it says 2 next to it. Nothing would have edited it but that’s my only other possible answer..

 

73 Rick N2AMG

 

From: N1MMLoggerPlus@groups.io [mailto:N1MMLoggerPlus@groups.io] On Behalf Of Hank Garretson
Sent: Saturday, May 12, 2018 10:21 PM
To: n1mmloggerplus@groups.io
Subject: [N1MMLoggerPlus] VOLTA RY Scoring?

 

Contest type VOLTARTTY

V1.0.7170.0

Either I'm doing something wrong or ???

Not getting any QSO points for 6-land Zone-3 contacts.

 

Maybe http://www.contestvolta.com/point%20table.htm is outdated, but can't imagine that QSO points should be zero.

Maybe I'm misreading rules.

Contest Exuberantly,

Hank, W6SX

Re: Suggestion: Label Active Windows?

Martin OL5Y
 

Thanks for mentioning this problem - I also sometimes struggle with it...

Martin

 

From: N1MMLoggerPlus@groups.io [mailto:N1MMLoggerPlus@groups.io] On Behalf Of Rick Tavan
Sent: Sunday, May 13, 2018 2:35 AM
To: n1mmloggerplus@groups.io
Subject: [N1MMLoggerPlus] Suggestion: Label Active Windows?

 

Although active Options have check boxes in the Options drop-down menu, active Windows do not have check boxes or marks in the Windows drop-down menu. This has recently become a problem for me because I have been working with various multi-monitor configurations and Windows 10 seems to lose track of the location of windows frequently when the monitor configuration changes. This causes Logger windows to "disappear." Also, when I mouse over the MM icon in the task bar, it only displays Entry Windows, not all the others. The net is that I can't see some windows, can't tell whether they are active or not, and can't use the window-position recovery techniques that I use on other applications. It would be nice to know at least which windows Logger is trying to display. Not a big deal, but the next time surgery is performed on the Windows drop-down, some check marks would be nice to have.

 

Thanks,

 

/Rick N6XI

 

--


Rick Tavan
Truckee, CA

FT8 for Field Day

Anita Kemmerer
 

We are testing FT8 with N1MM for Field Day.  It does not appear that QSOs with the mode FT8 are counting toward the score – they show up with zero points.  Does the Field Day contest file need to be updated to support FT8 or is there something we are doing wrong?

 

Thanks,

 

Anita, AB1QB

Re: FT8 for Field Day

GIWagner@k5kg.com
 

Anita, I suggest you check with the ARRL Contest Manager regarding the scoring of FT8 QSOS in FD.

73, George K5KG



On May 13, 2018, at 17:15, Anita Kemmerer <akemmerer@...> wrote:

We are testing FT8 with N1MM for Field Day.  It does not appear that QSOs with the mode FT8 are counting toward the score – they show up with zero points.  Does the Field Day contest file need to be updated to support FT8 or is there something we are doing wrong?

 

Thanks,

 

Anita, AB1QB