Date   
Re: Enabling Advanced Voicing

John Bednar
 


Joe,

My guess would be that you changed the "Operator" callsign and the wav files do not exist for that operator.

John, K3CT



-----Original Message-----
From: Joe WB9SBD <nss@...>
To: N1MMLoggerPlus <N1MMLoggerPlus@groups.io>
Sent: Tue, Nov 20, 2018 11:24 am
Subject: Re: [N1MMLoggerPlus] Enabling Advanced Voicing

OK Thanks, Now an error that happened in the middle of the contest here.

We started with the advanced voicing all it was working FANTASTIC!

it would say for a serial number of 345 it would say three hundred forty five.

But later in the contest it said a file was missing and will run in umm "Basic"? Mode?

so for 345 it said three four five

But don't know why it was working then stopped.

Joe WB9SBD
n Bednar wrote:
Thousand.wav

John, K3CT 



-------- Original message --------
From: Joe WB9SBD <nss@...>
Date: 11/20/18 9:27 AM (GMT-05:00)
Subject: Re: [N1MMLoggerPlus] Enabling Advanced Voicing

What was he missing?

Joe WB9SBD

On 11/20/2018 6:46 AM, John Bednar wrote:

Resolved. 
Scott missed one file.

John, K3CT 




-------- Original message --------
From: Scott <scolit@...>
Date: 11/19/18 8:43 PM (GMT-05:00)
Subject: Re: [N1MMLoggerPlus] Enabling Advanced Voicing

Pete,

I'm having the same issue. I have hundred.wav in the folder but it still reads the number as (for example) "one-seven-five" instead of "one hundred seven five".

Scott
KN3A


Re: Enabling Advanced Voicing

Joe WB9SBD
 

OK Thanks, Now an error that happened in the middle of the contest here.

We started with the advanced voicing all it was working FANTASTIC!

it would say for a serial number of 345 it would say three hundred forty five.

But later in the contest it said a file was missing and will run in umm "Basic"? Mode?

so for 345 it said three four five

But don't know why it was working then stopped.

Joe WB9SBD
n Bednar wrote:

Thousand.wav

John, K3CT 



-------- Original message --------
From: Joe WB9SBD <nss@...>
Date: 11/20/18 9:27 AM (GMT-05:00)
Subject: Re: [N1MMLoggerPlus] Enabling Advanced Voicing

What was he missing?

Joe WB9SBD

On 11/20/2018 6:46 AM, John Bednar wrote:

Resolved. 
Scott missed one file.

John, K3CT 




-------- Original message --------
From: Scott <scolit@...>
Date: 11/19/18 8:43 PM (GMT-05:00)
Subject: Re: [N1MMLoggerPlus] Enabling Advanced Voicing

Pete,

I'm having the same issue. I have hundred.wav in the folder but it still reads the number as (for example) "one-seven-five" instead of "one hundred seven five".

Scott
KN3A


Re: Enabling Advanced Voicing

John Bednar
 

Thousand.wav

John, K3CT 



-------- Original message --------
From: Joe WB9SBD <nss@...>
Date: 11/20/18 9:27 AM (GMT-05:00)
To: N1MMLoggerPlus@groups.io
Subject: Re: [N1MMLoggerPlus] Enabling Advanced Voicing

What was he missing?

Joe WB9SBD

On 11/20/2018 6:46 AM, John Bednar wrote:

Resolved. 
Scott missed one file.

John, K3CT 




-------- Original message --------
From: Scott <scolit@...>
Date: 11/19/18 8:43 PM (GMT-05:00)
Subject: Re: [N1MMLoggerPlus] Enabling Advanced Voicing

Pete,

I'm having the same issue. I have hundred.wav in the folder but it still reads the number as (for example) "one-seven-five" instead of "one hundred seven five".

Scott
KN3A

CTY-2814 Country Files - 20 November 2018

Jim Reisert AD1C
 

The Country (CTY) Files were updated on 20 November 2018:

http://www.country-files.com/cty-2814-20-november-2018/

For installation instructions, start at:

http://www.country-files.com/

Hover your mouse over the word Contest in the menu, then select the
software you are using.

To install the file, follow the link to your software at the top of the page.

If you are interested in a bigger CTY.DAT for everyday logging, you can get
it here:

http://www.country-files.com/big-cty-20-november-2018/

Note that the release notes (and Version Entity) for this larger file are
different than what is shown below. There is a separate link to them.

As a reminder, there is an RSS feed of the latest country file announcements:

http://www.country-files.com/feed/

Here are the release notes:

20 November 2018 (CTY-2814)
VER20181120, Version entity is St. Helena, ZD7

Added/changed Entities/Prefixes/Callsigns:

* IQ1QQ/9 is Sicily, *IT9
* A41MO/ND and A41NN/ND are both Oman, A4
* A61Q/FD is United Arab Emirates, A6
* RI1ANM is Antarctica, CE9 in CQ zone 29, ITU zone 70
* EA3HZX/P is Spain, EA
* TX0A is French Polynesia, FO
* GB1918EKN is Northern Ireland, GI
* GB1BAF is Wales, GW
* HQ6, HQ9, HR6 and HR9 are all Honduras, HR
* IQ6VP/J, IU5JHK/J and IZ4AIH/J are all Italy, I
* AL7RS is in ITU zone 8, not ITU zone 6
* AL7RS is in CQ zone 5, not CQ zone 3
* KL2RA, W1JCW and WY7KY are all United States, K in CQ zone 4, ITU zone 7
* K4MMW and W4JUU are both United States, K in CQ zone 4, ITU zone 8
* N1VOP and N3GWR are both Hawaii, KH6
* KC0YSW, N8SUG and NW7F are all Alaska, KL
* W4LIS is US Virgin Islands, KP2
* KK4DCX, N6NVD and W1H are all Puerto Rico, KP4
* LT2F/F, LU1AET/D, LU1DAR/D, LU1DS/D, LU1EPC/D, LU1EQU/D, LU1FMC/F,
LU1II/I, LU1JN/J, LU1LT/L, LU1UG/U, LU1VDF/D, LU2AGQ/D, LU2AVG/D, LU2DG/D,
LU2DJL/D, LU2DRT/D, LU2EE/D, LU2EGA/D, LU2ENH/D, LU2FQ/J, LU3DEY/D, LU3DHF/D,
LU3DY/D, LU3DYN/D, LU3ELR/D, LU3EP/D, LU3FCI/D, LU3HPW/H, LU4ACA/D, LU4DGC/D,
LU4DK/D, LU4DLJ/D, LU4DLN/D, LU4ERS/D, LU4FM/F, LU4HAP/H, LU4HOQ/H, LU4LBU/L,
LU4VSD/D, LU5BDS/D, LU5DA/D, LU5DF/D, LU5DGR/D, LU5DLH/D, LU5DMP/D, LU5DSH/D,
LU5DTF/D, LU5EFG/D, LU5EP/D, LU5JB/J, LU5JCL/J, LU5JI/J, LU5JJF/J, LU5JKI/J,
LU5JLA/J, LU5JOL/J, LU5YUS/H, LU6DCT/D, LU6DDC/D, LU6DL/D, LU6EAG/D, LU6EQV/D,
LU6FE/F, LU6JRA/L, LU6XQ/D, LU7AVW/D, LU7DAF/D, LU7DD/D, LU7DLN/D, LU7DNM/D,
LU7DOT/D, LU7DS/D, LU7DTC/D, LU7EMM/D, LU7EON/D, LU7FTF/H, LU7HCS/H, LU8EC/D,
LU8EHV/D, LU8HJ/H, LU9BRC/D, LU9DAA/D, LU9DPI/D, LU9EAG/D, LU9EI/D, LU9EIM/D,
LU9EOE/D, LU9ERA/D, LU9GOX/GA, LU9GOY/GA, LU9JMG/J, LU9JX/L, LW1DJ/D, LW1DYN/D,
LW1DYP/D, LW1ECE/D, LW1ECO/D, LW2DJM/D, LW2DNC/D, LW2DSM/D, LW2DYA/D, LW2EQS/D,
LW3DAB/D, LW3DGC/D, LW3DTD/D, LW3EMP/L, LW4DAF/D, LW4DBE/D, LW4DKI/D, LW5DHG/D,
LW5DR/D, LW5DTQ/D, LW6DLS/D, LW6DYZ/D, LW6EEA/D, LW7DGT/D, LW7DVC/D, LW7EDH/D,
LW8DMC/D, LW8DYT/D, LW9DTQ/D, LW9ENF/D, LW9ESY/D, LW9EUE/D, LW9EVE/D and LW9EZX/D
are all Argentina, LU
* LU1VZ/V, LU1WL/W, LU1YY/Y, LU2VCS/V, LU2WA/W, LU2XAN/Y, LU2YMG/Y,
LU3VSE/V, LU3XAP/XA, LU4XAP/XA, LU4XEG/XA, LU4XFN/XA, LU5YBR/V, LU7XBX/XA,
LU8XBC/XA, LU8XBS/XA, LU8YAH/Y and LU9XCC/XA are all Argentina, LU in ITU zone 16
* LX9S/J is Luxembourg, LX
* OK1KCR/J is Czech Republic, OK
* OZ1KR/J is Denmark, OZ
* PA1FJ/J, PA3AFG/J, PA3EFR/J, PA3GQS/J, PA6JAM/J, PA6SHB/J, PA6SJB/J,
PA6SJS/J, PE2MGA/J, PI4SHV/J and PI9TP/J are all Netherlands, PA
* SV2CLJ/J and SV2RNY/J are both Greece, SV
* TA1FA/2 is Asiatic Turkey, TA
* R130ANT, R130TU, R200SB, R200T, RA2FDX/3, RA9KD/6, RU9MU/1 and UE70AR
are all European Russia, UA
* RA4RU/9 and RZ5D/8 are both Asiatic Russia, UA9 in ITU zone 20
* R0LY/9 is Asiatic Russia, UA9 in CQ zone 18, ITU zone 31
* RV3DSA/0 is Asiatic Russia, UA9 in CQ zone 19, ITU zone 34
* UR4VWN/J is Ukraine, UR
* VK4VXX is Australia, VK in CQ zone 29, ITU zone 58
* VI9PEACE is Christmas Island, VK9X

Removed Entities/Prefixes/Callsigns:

* 9M4SAB in East Malaysia, 9M6
* VP8ADE/B in Antarctica, CE9
* EA1RCI/ESM in Spain, EA
* EA2EZ/6, EA3HZX/6 and EA3HZX/P in Balearic Islands, EA6
* TO6OK in Mayotte, FH
* TO40CDXC in Martinique, FM
* GB5DPR in Northern Ireland, GI
* GB2KDR and GB2RDR in Scotland, GM
* GB0WHH, GB2CR and GB4OST in Wales, GW
* 7Z1AL/ND in Saudi Arabia, HZ
* IT9RGY/4 in Italy, I
* IQ0AH/P and IQ0AK/P in Sardinia, IS
* AB8YZ, KL7RST, KU4QG, N1JM and N5TF in United States, K
* AH0F in Guam, KH2
* K4FRZ, KB3SEV, KC2HL, KC2PGW, KC9SBG, KD0ZSP, KD7UV, KE7PIZ and WC6B
in Hawaii, KH6
* KG5EQN in Alaska, KL
* KN4GNO in Puerto Rico, KP4
* LU3DVN/X in Argentina, LU
* 8S8ODEN in Sweden, SM
* TA1BX/2 and TA1D/3 in Asiatic Turkey, TA
* R1155SM, R1293W, R460AS, RT9K/6, RW9JZ/6 and UB5O/1 in European Russia, UA
* UB5O/2 in Kaliningrad, UA2
* RK6BBM/9, RW1AI/9, UB5O/0, UB5O/4, UB5O/8 and UB5O/9 in Asiatic Russia, UA9
* VK6YB/2 in Australia, VK

73 - Jim AD1C

--
Jim Reisert AD1C, <jjreisert at alum.mit.edu>, http://www.ad1c.us

Re: Enabling Advanced Voicing

Joe WB9SBD
 

What was he missing?

Joe WB9SBD

On 11/20/2018 6:46 AM, John Bednar wrote:

Resolved. 
Scott missed one file.

John, K3CT 




-------- Original message --------
From: Scott <scolit@...>
Date: 11/19/18 8:43 PM (GMT-05:00)
Subject: Re: [N1MMLoggerPlus] Enabling Advanced Voicing

Pete,

I'm having the same issue. I have hundred.wav in the folder but it still reads the number as (for example) "one-seven-five" instead of "one hundred seven five".

Scott
KN3A

Re: Enabling Advanced Voicing

Pete Smith
 

This was also my problem - I left out 10.wav. The voicing sounds terrible, but that's my bad.

73, Pete N4ZR
Check out the Reverse Beacon Network 
at <http://reversebeacon.net>, now 
spotting RTTY activity worldwide. 
For spots, please use your favorite 
"retail" DX cluster.
On 11/19/2018 9:01 PM, John Bednar wrote:

 

Pete,

 

The first thing I would check is that you have all of the files.

 

I verified with the source code that the manual is correct.

The required files are:

0.wav through 19.wav (20 files) 
20.wav through 90.wav (only the even tens intervals) (8 files) 
hundred.wav and thousand.wav

 

The check is performed the first time the # macro is used after program start. The pass or fail results are listed in the Info window so open the window before you use the # macro for the first time.

 

The fail or pass results are remembered until you restart the program.

 

John, K3CT

 

 

From: N1MMLoggerPlus@groups.io <N1MMLoggerPlus@groups.io> On Behalf Of Pete Smith
Sent: Monday, November 19, 2018 4:52 PM
To: N1MMLoggerPlus@groups.io
Subject: [N1MMLoggerPlus] Enabling Advanced Voicing

 

What I hope is a simple question - I'm trying to get advanced voicing to run, specifically for serial numbers.  I've recorded all the necessary files for advanced voicing, and put them in a \N4ZR folder in the right path.  However when I enter a number like "1123", I get simple voicing, rather than the advanced format. Have i missed a switch somewhere to turn on advanced voicing?

-- 
 
73, Pete N4ZR
Check out the Reverse Beacon Network 
at <http://reversebeacon.net>, now 
spotting RTTY activity worldwide. 
For spots, please use your favorite 
"retail" DX cluster.

Re: Enabling Advanced Voicing

John Bednar
 


Resolved. 
Scott missed one file.

John, K3CT 




-------- Original message --------
From: Scott <scolit@...>
Date: 11/19/18 8:43 PM (GMT-05:00)
To: N1MMLoggerPlus@groups.io
Subject: Re: [N1MMLoggerPlus] Enabling Advanced Voicing

Pete,

I'm having the same issue. I have hundred.wav in the folder but it still reads the number as (for example) "one-seven-five" instead of "one hundred seven five".

Scott
KN3A

Re: Voicing serial numbers in SS

Kent Olsen
 

John

I will look at it!

Thanks
73
Kent
N6WT


On Mon, Nov 19, 2018 at 3:18 PM John Bednar <k3ct@...> wrote:

Kent,

 

Looks like your function key string is wrong.

 

!,N6WT\#,CQWWEXCHANGE.WAV

 

“#” is a macro. It is operator aware.

 

The “N6WT\” portion is unable to be played:

Can't find this file - C:\Users\kilo6\Documents\N1MM Logger+\Wav\N6WT\

 

John, K3CT

 

 

From: N1MMLoggerPlus@groups.io <N1MMLoggerPlus@groups.io> On Behalf Of Kent Olsen
Sent: Monday, November 19, 2018 2:53 PM
To: N1MMLoggerPlus@groups.io
Subject: [N1MMLoggerPlus] Voicing serial numbers in SS

 

I was trying to setup advanced voicing for the SweepStakes but I gave up before the contest started. 

 

I used W1VE SYNDVK to create all the files. I even checked to see if they are all there, and they are.

 

When in Run mode I would enter a call sign and hit enter. I would get the error:

SSB Message Error: 

"File not found. 

2018-11-19 19:39:21.185 PM Correct Configurer, Letters File Path, add a comma between wav files or remove the unexpected macro from the function key.

Port: True Thread # 1 @ 2018-11-19 19:39:21.190 PM

  Operator, station call - N6WT

2018-11-19 19:39:21.195 PM User programmable Letters File Path - {Operator}\

2018-11-19 19:39:21.200 PM Parsed Letters Path - C:\Users\kilo6\Documents\N1MM Logger+\Wav\LettersFiles\N6WT\

2018-11-19 19:39:21.204 PM Unparsed function key string - !,N6WT\#,CQWWEXCHANGE.WAV

2018-11-19 19:39:21.211 PM Parsed function key string - !,C:\Users\kilo6\Documents\N1MM Logger+\Wav\N6WT\,C:\Users\kilo6\Documents\N1MM Logger+\Wav\LettersFiles\N6WT\3.wav,C:\Users\kilo6\Documents\N1MM Logger+\Wav\LettersFiles\N6WT\7.wav,C:\Users\kilo6\Documents\N1MM Logger+\Wav\LettersFiles\N6WT\3.wav,C:\Users\kilo6\Documents\N1MM Logger+\Wav\CQWWEXCHANGE.WAV"

2018-11-19 19:39:21.227 PM Can't find this file - !

2018-11-19 19:39:21.232 PM Can't find this file - C:\Users\kilo6\Documents\N1MM Logger+\Wav\N6WT\

2018-11-19 19:39:21.237 PM Can't find this file - C:\Users\kilo6\Documents\N1MM Logger+\Wav\CQWWEXCHANGE.WAV"

 

What am I doing wrong?

 

Thanks

73

Kent

N6WT

diversity receive feature request for IC-7610 (and other radios?)

David Jaffe
 

What I describe below is  (I believe) a shortcoming of the IC-7610, but the addition of a feature in N1MM+ would work around it, and might be useful for other radios.  (Or perhaps the feature is already present, and I just don't know about it?)

The IC-7610 has a diversity receive feature, which is enabled by setting "TRACKING" to "ON".  This makes it so turning the main tuning knob changes both VFOs (which can be listening to different antennas).  The problem is that if you then change the frequency from N1MM+ (e.g. by clicking in the band map), only VFO-A changes.  Now if you turn the main tuning knob on the radio, the two VFOs change together, but maintaining the offset that was the result of the band map change.  For example, if both VFOs are on 7.160 and you click on 7.155 on the band map and then turn the main tuning knob on the transceiver so that VFO-A displays 7.160 again, now VFO-B will be at 7.165. This confused the heck out of me when I first experienced it.  It pretty much makes the diversity receive feature of the transceiver useless when doing contesting (or any CAT for that matter.)

I don't know the extent of rig-specific features in N1MM+, but it is possible from the CI-V to determine whether tracking mode is on (I believe).  So N1MM+ could set both VFOs in this case.  

Or, if that's too rig-specific, perhaps there could be a Config-settable mode (in SO1V only) called something like "Set both VFOs".   If the feature was added in that manner, then it would work on any two-VFO radio, even if it is not advertised as having diversity receive.

Thanks for considering this (and/or telling me why it's a bad idea!)

73,
K6DAJ
David


Re: Enabling Advanced Voicing

Scott
 

Hi John,

I sent you an email with screenshots of what I did tonight to your email.

Scott

Re: Enabling Advanced Voicing

John Bednar
 

Scott,

 

You need more than the hundred.wav file. See the message that I sent this morning.

 

John, K3CT

 

 

From: N1MMLoggerPlus@groups.io <N1MMLoggerPlus@groups.io> On Behalf Of Scott
Sent: Monday, November 19, 2018 8:44 PM
To: N1MMLoggerPlus@groups.io
Subject: Re: [N1MMLoggerPlus] Enabling Advanced Voicing

 

Pete,

I'm having the same issue. I have hundred.wav in the folder but it still reads the number as (for example) "one-seven-five" instead of "one hundred seven five".

Scott
KN3A

Re: Enabling Advanced Voicing

John Bednar
 

 

Pete,

 

The first thing I would check is that you have all of the files.

 

I verified with the source code that the manual is correct.

The required files are:

0.wav through 19.wav (20 files) 
20.wav through 90.wav (only the even tens intervals) (8 files) 
hundred.wav and thousand.wav

 

The check is performed the first time the # macro is used after program start. The pass or fail results are listed in the Info window so open the window before you use the # macro for the first time.

 

The fail or pass results are remembered until you restart the program.

 

John, K3CT

 

 

From: N1MMLoggerPlus@groups.io <N1MMLoggerPlus@groups.io> On Behalf Of Pete Smith
Sent: Monday, November 19, 2018 4:52 PM
To: N1MMLoggerPlus@groups.io
Subject: [N1MMLoggerPlus] Enabling Advanced Voicing

 

What I hope is a simple question - I'm trying to get advanced voicing to run, specifically for serial numbers.  I've recorded all the necessary files for advanced voicing, and put them in a \N4ZR folder in the right path.  However when I enter a number like "1123", I get simple voicing, rather than the advanced format. Have i missed a switch somewhere to turn on advanced voicing?

-- 
 
73, Pete N4ZR
Check out the Reverse Beacon Network 
at <http://reversebeacon.net>, now 
spotting RTTY activity worldwide. 
For spots, please use your favorite 
"retail" DX cluster.

Re: Enabling Advanced Voicing

Scott
 

Pete,

I'm having the same issue. I have hundred.wav in the folder but it still reads the number as (for example) "one-seven-five" instead of "one hundred seven five".

Scott
KN3A

Re: Enabling Advanced Voicing

Pete Smith
 

No, I set it up separately, alone on a function key -   F9,#

73, Pete N4ZR
Check out the Reverse Beacon Network 
at <http://reversebeacon.net>, now 
spotting RTTY activity worldwide. 
For spots, please use your favorite 
"retail" DX cluster.
On 11/19/2018 5:12 PM, Mike ND9G wrote:

I assume you're trying to send the number as part of your exchange (F2). What does your F2 message setup look like?

73,
Mike ND9G


On Mon, Nov 19, 2018 at 4:06 PM Pete Smith <n4zr@...> wrote:

Why does the ! have to be in F5?  I don't want to voice the other guy's callsign.  Anyway I tried that and it had no effect

I've checked the Error Log file and it sheds no light. I'm not getting an error when the program uses simple voicing.

73, Pete N4ZR
Check out the Reverse Beacon Network 
at <http://reversebeacon.net>, now 
spotting RTTY activity worldwide. 
For spots, please use your favorite 
"retail" DX cluster.
On 11/19/2018 4:56 PM, john ni0k wrote:
Addendum: Did you put the ! character in the F5 area?

Pete Smith wrote:

What I hope is a simple question - I'm trying to get advanced voicing to run, specifically for serial numbers.  I've recorded all the necessary files for advanced voicing, and put them in a \N4ZR folder in the right path.  However when I enter a number like "1123", I get simple voicing, rather than the advanced format. Have i missed a switch somewhere to turn on advanced voicing?

-- 

73, Pete N4ZR
Check out the Reverse Beacon Network 
at <http://reversebeacon.net>, now 
spotting RTTY activity worldwide. 
For spots, please use your favorite 
"retail" DX cluster.

Re: Check window not working

Tom Wagner (N1MM)
 

That is ok.

Send me direct your N1MM Admin.s3db database. Make sure N1MM+ is closed before you attach it to the email.

Tom

On 11/19/2018 2:56 PM, Guy Molinari wrote:
Tom,
    Here it is:
#
# Release 2018.11.02.00
# by Stu Phillips, K6TU
#
2E0AOZ
2E0BPP
2E0CEA
2E0CNL
2E0CPM
2E0CVN
2E0DKY
2E0EBM
2E0EFS
2E0EIC
2E0FFT
2E0FGA

Re: Voicing serial numbers in SS

John Bednar
 

Kent,

 

Looks like your function key string is wrong.

 

!,N6WT\#,CQWWEXCHANGE.WAV

 

“#” is a macro. It is operator aware.

 

The “N6WT\” portion is unable to be played:

Can't find this file - C:\Users\kilo6\Documents\N1MM Logger+\Wav\N6WT\

 

John, K3CT

 

 

From: N1MMLoggerPlus@groups.io <N1MMLoggerPlus@groups.io> On Behalf Of Kent Olsen
Sent: Monday, November 19, 2018 2:53 PM
To: N1MMLoggerPlus@groups.io
Subject: [N1MMLoggerPlus] Voicing serial numbers in SS

 

I was trying to setup advanced voicing for the SweepStakes but I gave up before the contest started. 

 

I used W1VE SYNDVK to create all the files. I even checked to see if they are all there, and they are.

 

When in Run mode I would enter a call sign and hit enter. I would get the error:

SSB Message Error: 

"File not found. 

2018-11-19 19:39:21.185 PM Correct Configurer, Letters File Path, add a comma between wav files or remove the unexpected macro from the function key.

Port: True Thread # 1 @ 2018-11-19 19:39:21.190 PM

  Operator, station call - N6WT

2018-11-19 19:39:21.195 PM User programmable Letters File Path - {Operator}\

2018-11-19 19:39:21.200 PM Parsed Letters Path - C:\Users\kilo6\Documents\N1MM Logger+\Wav\LettersFiles\N6WT\

2018-11-19 19:39:21.204 PM Unparsed function key string - !,N6WT\#,CQWWEXCHANGE.WAV

2018-11-19 19:39:21.211 PM Parsed function key string - !,C:\Users\kilo6\Documents\N1MM Logger+\Wav\N6WT\,C:\Users\kilo6\Documents\N1MM Logger+\Wav\LettersFiles\N6WT\3.wav,C:\Users\kilo6\Documents\N1MM Logger+\Wav\LettersFiles\N6WT\7.wav,C:\Users\kilo6\Documents\N1MM Logger+\Wav\LettersFiles\N6WT\3.wav,C:\Users\kilo6\Documents\N1MM Logger+\Wav\CQWWEXCHANGE.WAV"

2018-11-19 19:39:21.227 PM Can't find this file - !

2018-11-19 19:39:21.232 PM Can't find this file - C:\Users\kilo6\Documents\N1MM Logger+\Wav\N6WT\

2018-11-19 19:39:21.237 PM Can't find this file - C:\Users\kilo6\Documents\N1MM Logger+\Wav\CQWWEXCHANGE.WAV"

 

What am I doing wrong?

 

Thanks

73

Kent

N6WT

Re: Enabling Advanced Voicing

Mike ND9G
 

I assume you're trying to send the number as part of your exchange (F2). What does your F2 message setup look like?

73,
Mike ND9G


On Mon, Nov 19, 2018 at 4:06 PM Pete Smith <n4zr@...> wrote:

Why does the ! have to be in F5?  I don't want to voice the other guy's callsign.  Anyway I tried that and it had no effect

I've checked the Error Log file and it sheds no light. I'm not getting an error when the program uses simple voicing.

73, Pete N4ZR
Check out the Reverse Beacon Network 
at <http://reversebeacon.net>, now 
spotting RTTY activity worldwide. 
For spots, please use your favorite 
"retail" DX cluster.
On 11/19/2018 4:56 PM, john ni0k wrote:
Addendum: Did you put the ! character in the F5 area?

Pete Smith wrote:

What I hope is a simple question - I'm trying to get advanced voicing to run, specifically for serial numbers.  I've recorded all the necessary files for advanced voicing, and put them in a \N4ZR folder in the right path.  However when I enter a number like "1123", I get simple voicing, rather than the advanced format. Have i missed a switch somewhere to turn on advanced voicing?

-- 

73, Pete N4ZR
Check out the Reverse Beacon Network 
at <http://reversebeacon.net>, now 
spotting RTTY activity worldwide. 
For spots, please use your favorite 
"retail" DX cluster.

Re: Enabling Advanced Voicing

Pete Smith
 

Why does the ! have to be in F5?  I don't want to voice the other guy's callsign.  Anyway I tried that and it had no effect

I've checked the Error Log file and it sheds no light. I'm not getting an error when the program uses simple voicing.

73, Pete N4ZR
Check out the Reverse Beacon Network 
at <http://reversebeacon.net>, now 
spotting RTTY activity worldwide. 
For spots, please use your favorite 
"retail" DX cluster.
On 11/19/2018 4:56 PM, john ni0k wrote:

Addendum: Did you put the ! character in the F5 area?

Pete Smith wrote:

What I hope is a simple question - I'm trying to get advanced voicing to run, specifically for serial numbers.  I've recorded all the necessary files for advanced voicing, and put them in a \N4ZR folder in the right path.  However when I enter a number like "1123", I get simple voicing, rather than the advanced format. Have i missed a switch somewhere to turn on advanced voicing?

-- 

73, Pete N4ZR
Check out the Reverse Beacon Network 
at <http://reversebeacon.net>, now 
spotting RTTY activity worldwide. 
For spots, please use your favorite 
"retail" DX cluster.

Re: Enabling Advanced Voicing

john ni0k
 

Addendum: Did you put the ! character in the F5 area?

Pete Smith wrote:

What I hope is a simple question - I'm trying to get advanced voicing to run, specifically for serial numbers.  I've recorded all the necessary files for advanced voicing, and put them in a \N4ZR folder in the right path.  However when I enter a number like "1123", I get simple voicing, rather than the advanced format. Have i missed a switch somewhere to turn on advanced voicing?

-- 

73, Pete N4ZR
Check out the Reverse Beacon Network 
at <http://reversebeacon.net>, now 
spotting RTTY activity worldwide. 
For spots, please use your favorite 
"retail" DX cluster.

Re: Enabling Advanced Voicing

john ni0k
 

What does the log file show?

-John NI0K

Pete Smith wrote:

What I hope is a simple question - I'm trying to get advanced voicing to run, specifically for serial numbers.  I've recorded all the necessary files for advanced voicing, and put them in a \N4ZR folder in the right path.  However when I enter a number like "1123", I get simple voicing, rather than the advanced format. Have i missed a switch somewhere to turn on advanced voicing?

-- 

73, Pete N4ZR
Check out the Reverse Beacon Network 
at <http://reversebeacon.net>, now 
spotting RTTY activity worldwide. 
For spots, please use your favorite 
"retail" DX cluster.