Date   
Re: Available slow refresh

John Bednar
 

Vytenis,

 

If you change to a new language, you should delete all spots. Right click in the Bandmap and select remove all spots, all bands.

 

John, K3CT

 

 

From: N1MMLoggerPlus@groups.io [mailto:N1MMLoggerPlus@groups.io] On Behalf Of John Bednar via Groups.Io
Sent: Sunday, November 17, 2019 5:45 AM
To: N1MMLoggerPlus@groups.io
Subject: Re: [N1MM+] Available slow refresh

 

Vytenis,

 

When a multiplier is worked the Entry window sends an update to all windows. The update should occur immediately.

 

I just ran a quick test with the LZDX contest and the Available window works as I describe.

 

If you are using a language pack, does the problem disappear when you switch to English?

 

John, K3CT

 

 

From: N1MMLoggerPlus@groups.io [mailto:N1MMLoggerPlus@groups.io] On Behalf Of Vytenis LY5T
Sent: Sunday, November 17, 2019 4:01 AM
To: N1MMLoggerPlus@groups.io
Subject: [N1MM+] Available slow refresh

 

I noticed this a month or so ago.
It takes a lot longer than before to re paint red to blue color in Available window. i.e.if I work multiplier, say zone itu  z27 in current lzdx contest, all other z27 multiplier callsigns in Available window remains red even minutes after first z27 qso worked.
If I click to insert this fake "multiplier" into Entry window and press Alt-Q (go back to CQ freq, ) callign is repainted to blue.
Telnet spots shows up without delay and goes away as soon as are worked.
Anyone else noticed this? Is there anything I can do on my side to fix?
v. 1.0.8014 win7/64b Core i5-5300 8GB ram +SSD

Vytenis LY5T

Re: Available slow refresh

John Bednar
 

Vytenis,

 

When a multiplier is worked the Entry window sends an update to all windows. The update should occur immediately.

 

I just ran a quick test with the LZDX contest and the Available window works as I describe.

 

If you are using a language pack, does the problem disappear when you switch to English?

 

John, K3CT

 

 

From: N1MMLoggerPlus@groups.io [mailto:N1MMLoggerPlus@groups.io] On Behalf Of Vytenis LY5T
Sent: Sunday, November 17, 2019 4:01 AM
To: N1MMLoggerPlus@groups.io
Subject: [N1MM+] Available slow refresh

 

I noticed this a month or so ago.
It takes a lot longer than before to re paint red to blue color in Available window. i.e.if I work multiplier, say zone itu  z27 in current lzdx contest, all other z27 multiplier callsigns in Available window remains red even minutes after first z27 qso worked.
If I click to insert this fake "multiplier" into Entry window and press Alt-Q (go back to CQ freq, ) callign is repainted to blue.
Telnet spots shows up without delay and goes away as soon as are worked.
Anyone else noticed this? Is there anything I can do on my side to fix?
v. 1.0.8014 win7/64b Core i5-5300 8GB ram +SSD

Vytenis LY5T

Re: Auto refresh spots in bandmap

Bob - KØRC
 

Right-click in the bandmap window and lengthen the "Set Spot Timeout" value (4th item from bottom). This will allow spots to "hang around" longer.

73 de Bob - KØRC in MN


On 11/17/2019 12:34 AM, Grant Kesselring wrote:
How do I set up the Telnet window so I get spots continuously refreshed in the bandmap windows?  The spots in the bandmaps expire after a time, and I keep having to hit the SH/DX button in the Telnet window to populate again.
Grant K1KD
-- 


Available slow refresh

Vytenis LY5T
 

I noticed this a month or so ago.
It takes a lot longer than before to re paint red to blue color in Available window. i.e.if I work multiplier, say zone itu  z27 in current lzdx contest, all other z27 multiplier callsigns in Available window remains red even minutes after first z27 qso worked.
If I click to insert this fake "multiplier" into Entry window and press Alt-Q (go back to CQ freq, ) callign is repainted to blue.
Telnet spots shows up without delay and goes away as soon as are worked.
Anyone else noticed this? Is there anything I can do on my side to fix?
v. 1.0.8014 win7/64b Core i5-5300 8GB ram +SSD

Vytenis LY5T

Re: Audio Problems

Vytenis LY5T
 

How radio is connected to PC? winkey? serial/usb adapter? what port settings are used? what radio is? when did it start?

Vytenis
LY5T

Auto refresh spots in bandmap

Grant Kesselring
 

How do I set up the Telnet window so I get spots continuously refreshed in the bandmap windows?  The spots in the bandmaps expire after a time, and I keep having to hit the SH/DX button in the Telnet window to populate again.
Grant K1KD

Re: Telnet not connecting

Gerald Boutin (VE1DT)
 

On Sat, Nov 16, 2019 at 11:26 PM, Louis House wrote:

Strangely Telnet in my N1MM software is working again. Thanks for all input to my issue.

73

Louis,

Telnet clusters are typically run by individual users. Occasional down time should not be unexpected.
 
--
Gerald, VE1DT

Re: Telnet not connecting

 

Strangely Telnet in my N1MM software is working again. Thanks for all input to my issue.

73

Louis, W3RZ

Dad #1 for Life

CWops #1963 for life

TDXS # 204

TARS for Life

B-VARC for Life

 

CW the original Digital !

 


--
Louis W3RZ

Re: OPON

Tom Wagner (N1MM)
 

Delete the op layouts and/or skins you don't want in the SkinsAndLayouts directory. Rename them to test the effect.

Tom

On 11/16/2019 8:36 PM, LB8IB wrote:
Hi all,

How do I clear the operator list (OPON) in N1MM so it doesn't remember the different operators settings anymore
Do I have to delete the N1MM Logger INI file?

73 de
Olaf
LB8IB

Re: OPON

ve3ki
 

In addition to the comments in the topic thread you found, you might also investigate the use of the Tools > Save Window Positions and Tools > Restore Window Positions menu items. 

73,
Rich VE3KI


On Sat, Nov 16, 2019 at 09:29 PM, LB8IB wrote:

Thank you for clarifying the OPON command Rich

The reason for my question was to not have the skin and layout messed up when we change operators.
My last contest was SARTG RTTY and I don't want this layout to appear on the screen in CQWW CW :-)
We will operate M/M from LN8W

I think I found the answer in this topic
https://groups.io/g/N1MMLoggerPlus/topic/28948054#38914 

Best regards
Olaf

Re: SS SSB

Ed Felter
 

Ok, understand. I did try earlier. Thanks Rich!  


ed, AI6O 

Re: SS SSB

ve3ki
 

Did you edit the mode in each of the first 9 contacts? Changing the mode during the contest will not change the made that was logged with previous contacts. You can edit the logged mode for a contact by double-clicking on it in the Log window.

73,
Rich VE3KI


On Sat, Nov 16, 2019 at 09:10 PM, Ed Felter wrote:
I inadvertently started the SS in CW mode for logging purposes.  First 9 contacts logged as CW vice SSB. Corrected config and it changed the logging so the next 80 Qs are fine.  Tried restoring, but score still off.  Any ideas short of reentering?  latest update, W7, 

ed, AI6O 

Re: OPON

LB8IB
 

Thank you for clarifying the OPON command Rich

The reason for my question was to not have the skin and layout messed up when we change operators.
My last contest was SARTG RTTY and I don't want this layout to appear on the screen in CQWW CW :-)
We will operate M/M from LN8W

I think I found the answer in this topic
https://groups.io/g/N1MMLoggerPlus/topic/28948054#38914 

Best regards
Olaf

SS SSB

Ed Felter
 

I inadvertently started the SS in CW mode for logging purposes.  First 9 contacts logged as CW vice SSB. Corrected config and it changed the logging so the next 80 Qs are fine.  Tried restoring, but score still off.  Any ideas short of reentering?  latest update, W7, 

ed, AI6O 

Re: OPON

ve3ki
 

OPON is not an operator list. It is the command you use to change the current operator.

There is an Operator field stored in every QSO in the database. If you never use the OPON or Ctrl+O command, the contents of the Operator field for every QSO will be the station callsign. Once you use an OPON or Ctrl+O command, a new operator value is assigned and that value will be used for the Operator field for each QSO from that point forward. If you want to restore the value so that future QSOs have the Operator field set the same as the station callsign, then just do an OPON and enter the station callsign as the operator. Or, while N1MM+ is not running, open the ini file with a text editor such as Notepad, search for a field called Operator= (it's in the [EntryWindow] section), and edit it. Deleting the entire ini file for such a minor change is not necessary.

This will not change the Operator field in past QSOs. The only way to change those is to edit each QSO, one at a time. Or, if you are exporting the log to ADIF, you can edit the ADIF file. This is much easier, since you can do a Replace All to change them all at once.

There is an operator list in the Contest Setup page, which is used to fill the OPERATOR: line in the Cabrillo file header. If you want that field to contain a list of all the operators that have at least one QSO with their call in the Operator field during the currently selected contest, there is a button for updating the operators from the log. If you want to change the contents of that field, just mouse-click in the field and edit its contents. That will not change anything in the log, but it will change what is output to the Cabrillo file header.

73,
Rich VE3KI


On Sat, Nov 16, 2019 at 08:45 PM, LB8IB wrote:
Hi all,

How do I clear the operator list (OPON) in N1MM so it doesn't remember the different operators settings anymore
Do I have to delete the N1MM Logger INI file?

73 de
Olaf
LB8IB

OPON

LB8IB
 

Hi all,

How do I clear the operator list (OPON) in N1MM so it doesn't remember the different operators settings anymore
Do I have to delete the N1MM Logger INI file?

73 de
Olaf
LB8IB

Re: Sweepstakes Log?

Rory Bowers
 

Thanks!  Found it 😁



Sent via the Samsung Galaxy S®6 active, an AT&T 4G LTE smartphone

-------- Original message --------
From: "John Bednar via Groups.Io" <k3ct@...>
Date: 11/16/19 3:12 PM (GMT-06:00)
To: N1MMLoggerPlus@groups.io
Subject: Re: [N1MM+] Sweepstakes Log?

Rory, 

Yes. Not at my computer.  The N1MM manual, Supported Contests will tell you what to use. I think it's ssssb.

John, K3CT 

-------- Original message --------
From: Rory Bowers <k6cks01@...>
Date: 11/16/19 4:07 PM (GMT-05:00)
To: N1MMLoggerPlus@groups.io
Subject: [N1MM+] Sweepstakes Log?

I don't see a November ARRL Sweepstakes log in the new version.  Did I miss it?
Thanks,
Rory, K5CKS

Audio Problems

Richard Zalewski
 

1. Long delay after hitting f key
2. No monitor of audio

Richard 
W7ZR ex:5C5Z, CN2ZR, K2JSP, W6SBZ, W7KXR, K9ZIJ, W9KNF, W0KDF, W0MQU, J68ZR, KC6ZR, PJ4/W7ZR, KH2,W7ZR, KH6/W7ZR, V31ZR, VK4AAZ, XE2DV


Be joyful in hope, patient in affliction, faithful in prayer

Re: Sweepstakes Log?

NS2N_PTA@...
 

SSSSB

NS2N


From: N1MMLoggerPlus@groups.io <N1MMLoggerPlus@groups.io> on behalf of Rory Bowers <k6cks01@...>
Sent: Saturday, November 16, 2019 4:07:56 PM
To: N1MMLoggerPlus@groups.io <N1MMLoggerPlus@groups.io>
Subject: [N1MM+] Sweepstakes Log?
 
I don't see a November ARRL Sweepstakes log in the new version.  Did I miss it?
Thanks,
Rory, K5CKS

Re: Sweepstakes Log?

John Bednar
 

Rory, 

Yes. Not at my computer.  The N1MM manual, Supported Contests will tell you what to use. I think it's ssssb.

John, K3CT 

-------- Original message --------
From: Rory Bowers <k6cks01@...>
Date: 11/16/19 4:07 PM (GMT-05:00)
To: N1MMLoggerPlus@groups.io
Subject: [N1MM+] Sweepstakes Log?

I don't see a November ARRL Sweepstakes log in the new version.  Did I miss it?
Thanks,
Rory, K5CKS