Date   
Re: CW Reader change

ve3ki
 

On the setup window for the CW Reader (from the CW Reader's Setup menu) there are Enable check boxes for Fldigi and CWGet. Checking the one for CWGet will automatically uncheck the one for Fldigi. Of course, you also need to set the path to the program.

73,
Rich VE3KI


On Sat, Nov 23, 2019 at 05:07 AM, <simonjlovell@...> wrote:
Hi All,
how do I change the CW reader to open CWget insted of FLDigi - I have been through all the menus options and setup and can not find the option to change the link setting
Thanks
Simon
2E0GXQ

wl_cty.dat warning?

Rick Tavan
 

Is it really necessary to warn about a version mismatch at a multi every 5 seconds? We’ll update it when the rate drops but don’t need thousands of warning messages!

Rick N6XI

--
Rick Tavan

CW Reader change

simonjlovell@...
 

Hi All,
how do I change the CW reader to open CWget insted of FLDigi - I have been through all the menus options and setup and can not find the option to change the link setting
Thanks
Simon
2E0GXQ

Re: N1MM freezes after log edits

danzee
 

Nope, stored in the default location on the same computer. 

Dan Zeitlin - K2YWE South Shore ARC - K3AU Annapolis, Maryland http://danzee.org


On Thursday, November 21, 2019, 10:16:13 AM EST, Gerald Boutin (VE1DT) <groupsio@...> wrote:


On Thu, Nov 21, 2019 at 10:35 AM, danzee wrote:
v1.0.8014
Some of the time editing a field directly in the log window causes N1MM to fatally freeze.When this happens, sometimes the log window contents go black.
This is a new problem. No such trouble in past..Does not appear to happen using using the Edit Contact window to make changes.
Where is your database file stored?

If it is on the "Cloud" somewhere, that would likely be your problem. If on your hard drive, there might be disk hardware problems, so you should run some disk diagnostic software.

--
Gerald, VE1DT

Re: CQ WW CW exchange

john ni0k
 

Rich,

Thanks for the speedy reply. I got it fixed!

73,
-John

ve3ki wrote on 11/22/2019 3:50 PM:

This has nothing to do with the version of the program. It's controlled by your function key message file, and program updates don't change that.

What is in your exchange (F2) message? You might have the wrong message file loaded, e.g. one that is hardwired for a contest with the state in the exchange.

If your F2 message contains the {EXCH} macro, that will send the contents of the Sent Exchange box in the Contest Setup dialog window (File > Open Log in Database...). What is in the Sent Exchange box? It should contain only your CQ zone, nothing else. 

73,
Rich VE3KI


On Fri, Nov 22, 2019 at 04:25 PM, john ni0k wrote:
I'm preparing for the contest and note that the latest version of
Logger+ sends my state instead of CQ zone as the rules specify. Am I
missing something?

-de John NI0K

Re: CQ WW CW exchange

ve3ki
 

This has nothing to do with the version of the program. It's controlled by your function key message file, and program updates don't change that.

What is in your exchange (F2) message? You might have the wrong message file loaded, e.g. one that is hardwired for a contest with the state in the exchange.

If your F2 message contains the {EXCH} macro, that will send the contents of the Sent Exchange box in the Contest Setup dialog window (File > Open Log in Database...). What is in the Sent Exchange box? It should contain only your CQ zone, nothing else. 

73,
Rich VE3KI


On Fri, Nov 22, 2019 at 04:25 PM, john ni0k wrote:
I'm preparing for the contest and note that the latest version of
Logger+ sends my state instead of CQ zone as the rules specify. Am I
missing something?

-de John NI0K

CQ WW CW exchange

john ni0k
 

I'm preparing for the contest and note that the latest version of Logger+ sends my state instead of CQ zone as the rules specify. Am I missing something?

-de John NI0K

Re: Audio Recording

Drew Vonada-Smith K3PA
 

I also use a Sony recorder.  Cheap and trouble free.

73,

Drew K3PA

Re: Audio Recording

Monte Stark
 

Thanks Rich and Mike,

 

I have used Audacity for recording our little bluegrass band in the past, so I tried it for this. Works great for the DX station but I can't find any way to get it to record my send audio.

 

Not going to mess with it any more now but will pick up one of the small digital recorders and parallel it with the phones for the next one. What the heck, a guy always needs more toys, right?

 

Thanks for the quick responses.

 

OK, back in my hole,

 

Ron, KU7Y

Mountain Home, ID  DN23dc

CW Ops #1211

QRP ARCI #8829

SOC #2

Idaho DX Association

Ron@...

 

From: N1MMLoggerPlus@groups.io [mailto:N1MMLoggerPlus@groups.io] On Behalf Of ve3ki
Sent: Friday, November 22, 2019 12:48 PM
To: N1MMLoggerPlus@groups.io
Subject: Re: [N1MM+] Audio Recording

 

To a considerable extent the answer depends on your radio. In the case of the FTdx3000, I believe that radio has an internal USB audio codec. Assuming that it does, and that the radio's USB port is connected to the computer, then you should be able to use the codec as the sound card in sound recording software. You might want to experiment first to see whether or not it also records the monitor output (your CW sidetone). There may be settings in the radio's menu to control whether the monitor output is heard in the sound card or not, and perhaps also to control the volume of the monitor relative to the receiver's audio.

For purposes of compliance with the CQ WW contest rules, they want a continuous recording, not a QSO-by-QSO recording. Probably the easiest way to do this is to use off-the-shelf sound recording software. There is a voice recording program in Windows, but I believe it does not give you a choice of sound cards, i.e. it only records from the default input device. You want to be able to record from the codec in the radio, and for that you want software with the capability to choose the sound card. Audacity (<https://www.audacityteam.org/>) certainly does that (and far more). K3IT's QSOrder program can also be configured to make continuous recordings (actually separate files hour by hour). There are many other choices available.

This is certainly not the only way. If you have ever used digital modes with your radio, you probably already have the hardware connections you need to record received audio, it's just a question of using recording software in place of the digital mode software. Another option might be to put a Y-connector in the path between your headphones and the radio, and feed an external sound card or sound recording device from it. That should work with any radio.

Whatever you are using, you need to take a bit of time ahead of the contest to adjust volume levels, perhaps adjust the sampling rate and bit depth, and so on. You don't need high fidelity, and if you can set the software to use a lower sampling rate, you can make the recorded files smaller - at high fidelity settings, a recording of a full contest will be a very large file.

73,
Rich VE3KI


On Fri, Nov 22, 2019 at 01:14 PM, Monte Stark wrote:

Win10 Home
N1mm+
FTdx3000
WinkeyerUSB

What do I need to do to record my audio during the contest?

While I will not post a large score I thought I might as well learn how to
do this for future test when I might have some better antennas!

Thanks,

OK, back in my hole,

Ron, KU7Y
Mountain Home, ID DN23dc
CW Ops #1211
QRP ARCI #8829
SOC #2
Idaho DX Association
Ron@...

 

Virus-free. www.avg.com

 

Re: Audio Recording

VE9AA - Mike
 

GA Ron,

Easiest way (by far, even if you are SO2R) is to simply split your headphone audio and go out to an external digital recorder.
It just can't get simpler than that.  I use a small audio amp/mixer in line as well, but you can get "useable" audio even w/o it.
Sony makes a couple nice ones @ $50-$70 at Best Buy or your favorite electronics store.

You can also download an app called QSOorder, but it can be complicated and there is lots to do (in some cases) to get it working right
and you have 4hrs+10mins before the contest starts, so....

HTH

Mike VE9AA

Re: Audio Recording

ve3ki
 

To a considerable extent the answer depends on your radio. In the case of the FTdx3000, I believe that radio has an internal USB audio codec. Assuming that it does, and that the radio's USB port is connected to the computer, then you should be able to use the codec as the sound card in sound recording software. You might want to experiment first to see whether or not it also records the monitor output (your CW sidetone). There may be settings in the radio's menu to control whether the monitor output is heard in the sound card or not, and perhaps also to control the volume of the monitor relative to the receiver's audio.

For purposes of compliance with the CQ WW contest rules, they want a continuous recording, not a QSO-by-QSO recording. Probably the easiest way to do this is to use off-the-shelf sound recording software. There is a voice recording program in Windows, but I believe it does not give you a choice of sound cards, i.e. it only records from the default input device. You want to be able to record from the codec in the radio, and for that you want software with the capability to choose the sound card. Audacity (<https://www.audacityteam.org/>) certainly does that (and far more). K3IT's QSOrder program can also be configured to make continuous recordings (actually separate files hour by hour). There are many other choices available.

This is certainly not the only way. If you have ever used digital modes with your radio, you probably already have the hardware connections you need to record received audio, it's just a question of using recording software in place of the digital mode software. Another option might be to put a Y-connector in the path between your headphones and the radio, and feed an external sound card or sound recording device from it. That should work with any radio.

Whatever you are using, you need to take a bit of time ahead of the contest to adjust volume levels, perhaps adjust the sampling rate and bit depth, and so on. You don't need high fidelity, and if you can set the software to use a lower sampling rate, you can make the recorded files smaller - at high fidelity settings, a recording of a full contest will be a very large file.

73,
Rich VE3KI


On Fri, Nov 22, 2019 at 01:14 PM, Monte Stark wrote:
Win10 Home
N1mm+
FTdx3000
WinkeyerUSB

What do I need to do to record my audio during the contest?

While I will not post a large score I thought I might as well learn how to
do this for future test when I might have some better antennas!

Thanks,

OK, back in my hole,

Ron, KU7Y
Mountain Home, ID DN23dc
CW Ops #1211
QRP ARCI #8829
SOC #2
Idaho DX Association
Ron@...

Audio Recording

Monte Stark
 

Win10 Home
N1mm+
FTdx3000
WinkeyerUSB

What do I need to do to record my audio during the contest?

While I will not post a large score I thought I might as well learn how to
do this for future test when I might have some better antennas!

Thanks,

OK, back in my hole,

Ron, KU7Y
Mountain Home, ID DN23dc
CW Ops #1211
QRP ARCI #8829
SOC #2
Idaho DX Association
Ron@...

Re: N1MM (almost) mutes Winkey USB sidetone

Dave Hachadorian
 

For SO2R, I turn off the sidetone on both rigs.  Winkey is set for paddle-only sidetone.  I brought speaker audio out of the Winkey and connected it to one of those old Radio Shack mobile comm speakers, and it is LOUD!  I can easily hear my paddle sending even with headphones on.  The only drawback is that other people in the house have to listen to a loud blast of CW every now and then.
 
Dave Hachadorian, K6LL
Yuma, AZ
 

From: Bob Epstein K8IA via Groups.Io
Sent: Friday, November 22, 2019 7:20 AM
To: N1MMLoggerPlus@groups.io
Subject: Re: [N1MM+] N1MM (almost) mutes Winkey USB sidetone
 
Pete,
 
Like VE9AA. I have always used the radio sidetone for contesting and the Winkey has always muted when N1MM pgm connects.
 
 
 
73, Bob K8IA
Arizona Outlaws Contest Club
 
-------- Original message --------
From: VE9AA - Mike <ve9aa@...>
Date: 11/22/19 7:04 AM (GMT-07:00)
To: N1MMLoggerPlus@groups.io
Subject: Re: [N1MM+] N1MM (almost) mutes Winkey USB sidetone
 
I believe most everyone uses the rigs' sidetone, when interfaced with N1MM+
(how would you hear it with your headphones on anyways?)

That's how I do it.

GL Pete.

Re: N1MM (almost) mutes Winkey USB sidetone

Pete Smith
 

Interesting, Bob.  Not my experience, though, as you say, 99 percent of the time I'm using headphones and my radio's sidetone.  The Winkeyer is not totally muted, just turned down too far to hear easily.

73, Pete N4ZR
Check out the Reverse Beacon Network 
at <http://reversebeacon.net>, now 
spotting RTTY activity worldwide. 
For spots, please use your favorite 
"retail" DX cluster.
On 11/22/2019 9:20 AM, Bob Epstein K8IA via Groups.Io wrote:

Pete,

Like VE9AA. I have always used the radio sidetone for contesting and the Winkey has always muted when N1MM pgm connects. 



73, Bob K8IA
Arizona Outlaws Contest Club

-------- Original message --------
From: VE9AA - Mike <ve9aa@...>
Date: 11/22/19 7:04 AM (GMT-07:00)
Subject: Re: [N1MM+] N1MM (almost) mutes Winkey USB sidetone

I believe most everyone uses the rigs' sidetone, when interfaced with N1MM+
(how would you hear it with your headphones on anyways?)

That's how I do it.

GL Pete.

Re: N1MM+ with Omnirig Virtual Comm Port software?

Alexander Kopp MD
 

I’m using win4yaesu with comocom for virtual com ports and omnirig and it works. 
Happy to give you more information when I get home from work tonight.
73, Alex 


On Nov 22, 2019, at 07:33, Larry K8UT <K8UT@...> wrote:


David,

The current version of OmniRig is 18 months old. The developer has declared the program is frozen: "We stopped the further development due to the complex integration into the current HAM-applications."

-larry K8UT

------ Original Message ------
From: "David Wilkins via Groups.Io" <davidinlondon@...>
Sent: 2019-11-21 10:50:07
Subject: [N1MM+] N1MM+ with Omnirig Virtual Comm Port software?

Hello - I already use Omnirig to interface my Windows 10 PC to my FT-dx-5000MP and an SDRuno RSP-1A SDR.  There are a few logging programs that Omnirig lists as being compatible with its Virtual Comm Posts function, but not N1MM+. 

Any chance that N1MM+ may be updated to work with it?

Regards - David G5HY

Re: N1MM (almost) mutes Winkey USB sidetone

Larry K8UT
 

>Config >Winkey only selects Sidetone ON or OFF.

On my Winkey USB there is no sidetone volume difference between N1MM+ and WKDemo.


------ Original Message ------
From: "Pete Smith" <n4zr@...>
Sent: 2019-11-22 08:44:04
Subject: [N1MM+] N1MM (almost) mutes Winkey USB sidetone

Getting set up for CQWW CW, and have a small problem.  My Winkeyer USB's sidetone is fine when using it standalone or with the WKDemo, but when I start MM+ it is muted almost to inaudible.  That suggests to me that MM+ must be sending a parameter to the keyer, but if so, I don't see anywhere in Config/Winkey to specify the sidetone level.  What am I missing?

73, Pete N4ZR
Check out the Reverse Beacon Network 
at <http://reversebeacon.net>, now 
spotting RTTY activity worldwide. 
For spots, please use your favorite 
"retail" DX cluster.

Re: N1MM (almost) mutes Winkey USB sidetone

Bob Epstein K8IA
 

Pete,

Like VE9AA. I have always used the radio sidetone for contesting and the Winkey has always muted when N1MM pgm connects. 



73, Bob K8IA
Arizona Outlaws Contest Club

-------- Original message --------
From: VE9AA - Mike <ve9aa@...>
Date: 11/22/19 7:04 AM (GMT-07:00)
To: N1MMLoggerPlus@groups.io
Subject: Re: [N1MM+] N1MM (almost) mutes Winkey USB sidetone

I believe most everyone uses the rigs' sidetone, when interfaced with N1MM+
(how would you hear it with your headphones on anyways?)

That's how I do it.

GL Pete.

Re: Airspy & Spectrum Scope

Pete Smith
 

If you follow the instructions in the N1MM+ manual closely you should have no trouble.  I do note one fatal error in some of the messages on this topic - the IP address for "this computer" is 127.0.0.1:5555 (port 5555), which must be entered in the spectrum display's Connect dialog.  When you click the "C" (for Connect) it opens a separate DOS program called spyserver.exe which serves as an intermediary between the receiver and the spectrum display

73, Pete N4ZR
Check out the Reverse Beacon Network 
at <http://reversebeacon.net>, now 
spotting RTTY activity worldwide. 
For spots, please use your favorite 
"retail" DX cluster.
On 11/21/2019 9:27 PM, William Liporace WC2L wrote:

I have followed those directions..
Device was sleeping. Wake up
Could not acquire device....
I have left it 0.0.0,0, 172.0.0.1 and the IP address of the PC

Will WC2L

On 11/21/2019 9:03 PM, Tom Wagner (N1MM) wrote:
https://n1mmwp.hamdocs.com/manual-windows/spectrum-display-window/#airspy-hf

On 11/21/2019 7:12 PM, John H. Long Jr. wrote:
lost track of what I did already.
Getting old is great !!!
So, I believe I followed this video on how to setup SpyServer and then setup N1MM to use it.
https://www.bing.com/videos/search?q=spyserver+setup&&view=detail&mid=4C0701DA8C752BC6E70B4C0701DA8C752BC6E70B&&FORM=VRDGAR
I did use localhost:5555 for the IP address in both Spyserver and N1MM.
After setting up spyserver (as the video suggests) and running it, I right clicked in the N1MM spectrum window and selected "Spectrum Source ---> Airspy HF+"
I hope this helps some.
John H. Long Jr.
KW7A
1370 N 150 E
Nephi, UT 84648
USA
(435) 888-LONG

    --------- Original Message ---------
    Subject: Re: [N1MM+] Airspy & Spectrum Scope
    From: 'William Liporace WC2L' <wc2l@...>
    Date: 11/21/19 3:55 pm
    To: N1MMLoggerPlus@groups.io

    Please do share!! Inquiring minds would like to know!!
    Or at least my feeble mind~~

    Will WC2L

    On 11/21/2019 4:27 AM, John H. Long Jr. wrote:

        Solved.
        I found some detailed instructions online.
        John H. Long Jr.
        KW7A
        1370 N 150 E
        Nephi, UT 84648
        USA
        (435) 888-LONG

            --------- Original Message ---------
            Subject: Re: [N1MM+] Airspy & Spectrum Scope
            From: 'John H. Long Jr.' <john@...>
            Date: 11/20/19 8:59 pm
            To: N1MMLoggerPlus@groups.io

            I am also having problems with getting Airspy HF+
            Discovery working in the N1MM spectrum display.
            This is my first attempt at trying to run it.
            Do I need to change anything as a way of setting up
            spyserver and N1MM?
            I noticed Airsoy server screen says it is listening on
            0.0.0.0:5555
              N1mm seems to be looking for 127.0.0.0:5555
            Is that an issue?
            John H. Long Jr.
            KW7A
            1370 N 150 E
            Nephi, UT 84648
            USA
            (435) 888-LONG

                --------- Original Message ---------
                Subject: [N1MM+] Airspy & Spectrum Scope
                From: 'William Liporace WC2L' <wc2l@...>
                Date: 11/20/19 7:03 pm
                To: N1MMLoggerPlus@groups.io

                I'm hoping someone can help me!!
                I have the latest version of N1MM & SDRPlay!

                When I start N1MM+, Spyserver does not auto start.
                Manually start Spyserver
                Start N1MM+
                Window - Spectrum Display
                Right Click Spectrum Display - Airspy HF+
                Then I get the following error:

                N1MMLogger.net - Version 1.0.8014.0
                Built: 11/13/2019 8:53:10 AM
                Microsoft Windows NT 10.0.18363.0,64:1,en-US,en-US
                Error occurred at: 11/20/2019 8:48:31 PM in Thread:
                Spectrum UI Thread - a12dd15d-87ac-49f8-9cc7-0c774e031876
---------------------------------------------------------------------------------------
                System.ApplicationException: Device got disconnected
                   at
N1MMLogger.Net.SDRSharp.FrontEnds.SpyServer.SpyClient.Connect(String
                host, Int32 port) in C:\N1MM+Source\N1MM Logger on
                .NET\N1MM Logger.Net\Classes\AirspyInterface.vb:line 166
                   at N1MMLogger.Net.SpectrumWindow.SpyConnect() in
                C:\N1MM+Source\N1MM Logger on .NET\N1MM
                Logger.Net\Forms\SpectrumWindow.vb:line 4161
                   at N1MMLogger.Net.SpectrumWindow.ConnectSpy() in
                C:\N1MM+Source\N1MM Logger on .NET\N1MM
                Logger.Net\Forms\SpectrumWindow.vb:line 4138
                   at
N1MMLogger.Net.SpectrumWindow.SetUpSpectrumProcessingClass()
                in C:\N1MM+Source\N1MM Logger on .NET\N1MM
                Logger.Net\Forms\SpectrumWindow.vb:line 1309
---------------------------------------------------------------------------------------

                Call Stack before the runtime error:   at
                System.Environment.GetStackTrace(Exception e, Boolean
                needFileInfo)
                   at System.Environment.get_StackTrace()
                   at N1MMLibrary.SharedLib.CallStackString() in
                C:\N1MM+Source\N1MM Logger on .NET\N1MM
                Library\Classes\SharedCode.vb:line 89
                   at N1MMLogger.Net.SharedCode.HandleError(Exception
                e, String PortName, String Info) in
                C:\N1MM+Source\N1MM Logger on .NET\N1MM
                Logger.Net\Modules\SharedCode.vb:line 186
                   at
N1MMLogger.Net.SpectrumWindow.SetUpSpectrumProcessingClass()
                in C:\N1MM+Source\N1MM Logger on .NET\N1MM
                Logger.Net\Forms\SpectrumWindow.vb:line 1355
                   at
N1MMLogger.Net.SpectrumWindow.AirspySourceMenuItem_Click(Object
                sender, EventArgs e) in C:\N1MM+Source\N1MM Logger on
                .NET\N1MM Logger.Net\Forms\SpectrumWindow.vb:line 2241
                   at
System.Windows.Forms.ToolStripItem.RaiseEvent(Object
                key, EventArgs e)
                   at
System.Windows.Forms.ToolStripMenuItem.OnClick(EventArgs
                e)
                   at
System.Windows.Forms.ToolStripItem.HandleClick(EventArgs
                e)
                   at
System.Windows.Forms.ToolStripItem.HandleMouseUp(MouseEventArgs
                e)
                   at
System.Windows.Forms.ToolStripItem.FireEventInteractive(EventArgs
                e, ToolStripItemEventType met)
                   at
System.Windows.Forms.ToolStripItem.FireEvent(EventArgs
                e, ToolStripItemEventType met)
                   at
System.Windows.Forms.ToolStrip.OnMouseUp(MouseEventArgs
                mea)
                   at
System.Windows.Forms.ToolStripDropDown.OnMouseUp(MouseEventArgs
                mea)
                   at System.Windows.Forms.Control.WmMouseUp(Message&
                m, MouseButtons button, Int32 clicks)
                   at System.Windows.Forms.Control.WndProc(Message& m)
                   at
System.Windows.Forms.ScrollableControl.WndProc(Message& m)
                   at System.Windows.Forms.ToolStrip.WndProc(Message& m)
                   at
System.Windows.Forms.ToolStripDropDown.WndProc(Message& m)
                   at
System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message&
                m)
                   at
System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message&
                m)
                   at
System.Windows.Forms.NativeWindow.Callback(IntPtr
                hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
                   at
System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG&
                msg)
                   at
System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(IntPtr
                dwComponentID, Int32 reason, Int32 pvLoopData)
                   at
System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32
                reason, ApplicationContext context)
                   at
System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32
                reason, ApplicationContext context)
                   at System.Windows.Forms.Application.Run(Form mainForm)
                   at
N1MMLogger.Net.N1MMLoggerCommon.StartSpectrumWindow(Object
                aGuid) in C:\N1MM+Source\N1MM Logger on .NET\N1MM
                Logger.Net\Modules\N1MMLoggerCommon.vb:line 11600
                   at
System.Threading.ThreadHelper.ThreadStart_Context(Object
                state)
                   at
System.Threading.ExecutionContext.RunInternal(ExecutionContext
                executionContext, ContextCallback callback, Object
                state, Boolean preserveSyncCtx)
                   at
System.Threading.ExecutionContext.Run(ExecutionContext
                executionContext, ContextCallback callback, Object
                state, Boolean preserveSyncCtx)
                   at
System.Threading.ExecutionContext.Run(ExecutionContext
                executionContext, ContextCallback callback, Object state)
                   at System.Threading.ThreadHelper.ThreadStart(Object
                obj)

                The Spyserver says Device is sleeping, Wake up!
                Could not acquire the device

                If I try to connect anyway, I get the following:

                See the end of this message for details on invoking
                just-in-time (JIT) debugging instead of this dialog box.
                ************** Exception Text **************
                System.ApplicationException: Device got disconnected
                   at
N1MMLogger.Net.SDRSharp.FrontEnds.SpyServer.SpyClient.Connect(String
                host, Int32 port) in C:\N1MM+Source\N1MM Logger on
                .NET\N1MM Logger.Net\Classes\AirspyInterface.vb:line 166
                   at N1MMLogger.Net.SpectrumWindow.SpyConnect() in
                C:\N1MM+Source\N1MM Logger on .NET\N1MM
                Logger.Net\Forms\SpectrumWindow.vb:line 4161
                   at N1MMLogger.Net.SpectrumWindow.ConnectSpy() in
                C:\N1MM+Source\N1MM Logger on .NET\N1MM
                Logger.Net\Forms\SpectrumWindow.vb:line 4138
                   at
N1MMLogger.Net.SpectrumWindow.AirspyConnect_Click(Object
                sender, EventArgs e) in C:\N1MM+Source\N1MM Logger on
                .NET\N1MM Logger.Net\Forms\SpectrumWindow.vb:line 4346
                   at System.Windows.Forms.Control.OnClick(EventArgs e)
                   at System.Windows.Forms.Button.OnClick(EventArgs e)
                   at System.Windows.Forms.Button.WndProc(Message& m)
                   at
System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message&
                m)
                   at
System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message&
                m)
                   at
System.Windows.Forms.NativeWindow.Callback(IntPtr
                hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)

                ************** Loaded Assemblies **************
                mscorlib
                    Assembly Version: 4.0.0.0
                    Win32 Version: 4.8.4042.0 built by: NET48REL1LAST_C
                    CodeBase:
file:///C:/Windows/Microsoft.NET/Framework/v4.0.30319/mscorlib.dll
                ----------------------------------------
                N1MMLogger.net
                    Assembly Version: 1.0.8014.0
                    Win32 Version: 1.0.8014
                    CodeBase:
file:///C:/Program%20Files%20(x86)/N1MM%20Logger+/N1MMLogger.net.exe
                ----------------------------------------
                Microsoft.VisualBasic
                    Assembly Version: 10.0.0.0
                    Win32 Version: 14.8.3752.0 built by: NET48REL1
                    CodeBase:
file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/Microsoft.VisualBasic/v4.0_10.0.0.0__b03f5f7f11d50a3a/Microsoft.VisualBasic.dll
                ----------------------------------------
                System
                    Assembly Version: 4.0.0.0
                    Win32 Version: 4.8.4001.0 built by: NET48REL1LAST_C
                    CodeBase:
file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dll
                ----------------------------------------
                System.Core
                    Assembly Version: 4.0.0.0
                    Win32 Version: 4.8.4042.0 built by: NET48REL1LAST_C
                    CodeBase:
file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Core/v4.0_4.0.0.0__b77a5c561934e089/System.Core.dll
                ----------------------------------------
                System.Windows.Forms
                    Assembly Version: 4.0.0.0
                    Win32 Version: 4.8.4042.0 built by: NET48REL1LAST_C
                    CodeBase:
file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms/v4.0_4.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
                ----------------------------------------
                System.Drawing
                    Assembly Version: 4.0.0.0
                    Win32 Version: 4.8.3752.0 built by: NET48REL1
                    CodeBase:
file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Drawing/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
                ----------------------------------------
                N1MMLibrary
                    Assembly Version: 1.0.8014.0
                    Win32 Version: 1.0.8014
                    CodeBase:
file:///C:/Program%20Files%20(x86)/N1MM%20Logger+/N1MMLibrary.DLL
                ----------------------------------------
                IQ
                    Assembly Version: 1.0.0.0
                    Win32 Version: 1.0.0.0
                    CodeBase:
file:///C:/Program%20Files%20(x86)/N1MM%20Logger+/IQ.DLL
                ----------------------------------------
                System.Windows.Forms.DataVisualization
                    Assembly Version: 4.0.0.0
                    Win32 Version: 4.8.3815.0
                    CodeBase:
file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms.DataVisualization/v4.0_4.0.0.0__31bf3856ad364e35/System.Windows.Forms.DataVisualization.dll
                ----------------------------------------
                System.Configuration
                    Assembly Version: 4.0.0.0
                    Win32 Version: 4.8.3752.0 built by: NET48REL1
                    CodeBase:
file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Configuration/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
                ----------------------------------------
                System.Xml
                    Assembly Version: 4.0.0.0
                    Win32 Version: 4.8.3752.0 built by: NET48REL1
                    CodeBase:
file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
                ----------------------------------------
                System.Web
                    Assembly Version: 4.0.0.0
                    Win32 Version: 4.8.4042.0 built by: NET48REL1LAST_C
                    CodeBase:
file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_32/System.Web/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Web.dll
                ----------------------------------------
                System.Runtime.Remoting
                    Assembly Version: 4.0.0.0
                    Win32 Version: 4.8.3752.0 built by: NET48REL1
                    CodeBase:
file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Runtime.Remoting/v4.0_4.0.0.0__b77a5c561934e089/System.Runtime.Remoting.dll
                ----------------------------------------
                System.Data.SQLite
                    Assembly Version: 1.0.92.0
                    Win32 Version: 1.0.92.0
                    CodeBase:
file:///C:/Program%20Files%20(x86)/N1MM%20Logger+/System.Data.SQLite.DLL
                ----------------------------------------
                System.Data
                    Assembly Version: 4.0.0.0
                    Win32 Version: 4.8.3752.0 built by: NET48REL1
                    CodeBase:
file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_32/System.Data/v4.0_4.0.0.0__b77a5c561934e089/System.Data.dll
                ----------------------------------------
                AxInterop.N1MMV12WaveLib
                    Assembly Version: 4.0.0.0
                    Win32 Version: 4.0.0.0
                    CodeBase:
file:///C:/Program%20Files%20(x86)/N1MM%20Logger+/AxInterop.N1MMV12WaveLib.DLL
                ----------------------------------------
                N1MMV12WaveLib
                    Assembly Version: 4.0.0.0
                    Win32 Version: 4.0.0.0
                    CodeBase:
file:///C:/Program%20Files%20(x86)/N1MM%20Logger+/N1MMV12WaveLib.DLL
                ----------------------------------------
                Accessibility
                    Assembly Version: 4.0.0.0
                    Win32 Version: 4.8.3752.0 built by: NET48REL1
                    CodeBase:
file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/Accessibility/v4.0_4.0.0.0__b03f5f7f11d50a3a/Accessibility.dll
                ----------------------------------------
                System.Transactions
                    Assembly Version: 4.0.0.0
                    Win32 Version: 4.8.3752.0 built by: NET48REL1
                    CodeBase:
file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_32/System.Transactions/v4.0_4.0.0.0__b77a5c561934e089/System.Transactions.dll
                ----------------------------------------
                ObjectListView
                    Assembly Version: 2.7.0.42249
                    Win32 Version: 2.7.0.0
                    CodeBase:
file:///C:/Program%20Files%20(x86)/N1MM%20Logger+/ObjectListView.DLL
                ----------------------------------------
                System.EnterpriseServices
                    Assembly Version: 4.0.0.0
                    Win32 Version: 4.8.3752.0 built by: NET48REL1
                    CodeBase:
file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_32/System.EnterpriseServices/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.EnterpriseServices.dll
                ----------------------------------------
                System.Runtime.Caching
                    Assembly Version: 4.0.0.0
                    Win32 Version: 4.8.3752.0
                    CodeBase:
file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Runtime.Caching/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Runtime.Caching.dll
                ----------------------------------------
                RawInput
                    Assembly Version: 1.0.0.0
                    Win32 Version: 1.0.0.0
                    CodeBase:
file:///C:/Program%20Files%20(x86)/N1MM%20Logger+/RawInput.DLL
                ----------------------------------------
                Microsoft.VisualBasic.PowerPacks.Vs
                    Assembly Version: 10.0.0.0
                    Win32 Version: 11.0.50727.1
                    CodeBase:
file:///C:/Program%20Files%20(x86)/N1MM%20Logger+/Microsoft.VisualBasic.PowerPacks.Vs.DLL
                ----------------------------------------
                NAudio
                    Assembly Version: 1.8.5.0
                    Win32 Version: 1.8.5.0
                    CodeBase:
file:///C:/Program%20Files%20(x86)/N1MM%20Logger+/NAudio.DLL
                ----------------------------------------
                System.Numerics
                    Assembly Version: 4.0.0.0
                    Win32 Version: 4.8.3752.0 built by: NET48REL1
                    CodeBase:
file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Numerics/v4.0_4.0.0.0__b77a5c561934e089/System.Numerics.dll
                ----------------------------------------
                ************** JIT Debugging **************
                To enable just-in-time (JIT) debugging, the .config
                file for this
                application or computer (machine.config) must have the
                jitDebugging value set in the system.windows.forms
                section.
                The application must also be compiled with debugging
                enabled.
                For example:
                <configuration>
                    <system.windows.forms jitDebugging="true" />
                </configuration>
                When JIT debugging is enabled, any unhandled exception
                will be sent to the JIT debugger registered on the
                computer
                rather than be handled by this dialog box.


                What is going on?? Can someone help??
                TNX Will WC2L

                --                 William Liporace WC2L
                http://www.wc2l.com  orhttp://dxc.wc2l.com
                AR-Cluster Node  telnet dxc.wc2l.com or 144.93 MHz
                wc2l@...

    --     William Liporace WC2L
    http://www.wc2l.com  orhttp://dxc.wc2l.com
    AR-Cluster Node  telnet dxc.wc2l.com or 144.93 MHz
    wc2l@...






Re: N1MM (almost) mutes Winkey USB sidetone

VE9AA - Mike
 

I believe most everyone uses the rigs' sidetone, when interfaced with N1MM+
(how would you hear it with your headphones on anyways?)

That's how I do it.

GL Pete.

N1MM (almost) mutes Winkey USB sidetone

Pete Smith
 

Getting set up for CQWW CW, and have a small problem.  My Winkeyer USB's sidetone is fine when using it standalone or with the WKDemo, but when I start MM+ it is muted almost to inaudible.  That suggests to me that MM+ must be sending a parameter to the keyer, but if so, I don't see anywhere in Config/Winkey to specify the sidetone level.  What am I missing?

73, Pete N4ZR
Check out the Reverse Beacon Network 
at <http://reversebeacon.net>, now 
spotting RTTY activity worldwide. 
For spots, please use your favorite 
"retail" DX cluster.