Date   

Nothing displays in Spectrum Display window with Flex radio

Richard Burke
 

I'm unable to get the N1MM+ Spectrum Display window to show a spectrum. I see that this situation has been reported in this discussion group before but I haven't been able to find a solution that works for me.

The situation is:

Computer running Win 10 Pro v2004.

Flex 6000 series radio remotely controlled (remotehamradio.com).

Smart SDR v3.1.12 is running as well as CAT and DAX. DAXIQ Channel 1 is selected in Smart SDR.

In the DAX control panel, the IQ Streams section shows the center frequency, a sample rate of 48000 and "streaming".

N1MM+ v 1.0.8560.0 communicates with Smart SDR (freq and mode are good). Entry window title bar shows radio to be FLEX-6000 Series Slice 1.

N1MM+ Spectrum Display window shows Unamed Scope Spectrum (Radio 1) in title bar. If I go to Spectrum Source / For all other radios, source named - it just shows an empty entry box. I've tried entering FLEX-6000 Series and FLEX-6000 Series Slice 1 to no avail.

Any ideas?

Tnx,

Dick, K7RB






Spot it Button

John Muzyka
 

Just a quick question if some one knows the answer, on the logging screen under the F key buttons is a button that says SPOT IT which it does just that it spots the station you are working, my question is can you edit the information it give and not just CW I have right clicked (like you do on the F keys) to try and edit the info to say the name of the contest but there is no edit on a right click, is this hidden in the Config file somewhere??
Cheers
John G4RCG 


Re: Corrupt .INI Files

AB2ZY
 

Send me all of your n1mm logger.ini.x.bak files and your current n1mmlogger.ini file.

 

From: N1MMLoggerPlus@groups.io [mailto:N1MMLoggerPlus@groups.io] On Behalf Of Danny Bush
Sent: Thursday, August 13, 2020 1:58 PM
To: n1mmloggerplus@groups.io
Subject: Re: Re: [N1MM+] Corrupt .INI Files

 

Correct,

All of my Configuration settings are gone...

73,
Danny Bush - NF4J

On 8/13/20, 12:48 AB2ZY <akozak@...> wrote:

Just so I understand for sure, all of your configuration settings (ports, winkey setup, mode control, etc. are gone? Or just that it no longer opens your default database?

 

Al

AB2ZY

 

From: N1MMLoggerPlus@groups.io [mailto:N1MMLoggerPlus@groups.io] On Behalf Of Danny Bush
Sent: Thursday, August 13, 2020 1:42 PM
To: N1MMLoggerPlus@groups.io
Cc: N1MMLoggerPlus@groups.io
Subject: Re: [N1MM+] Corrupt .INI Files

 

Al,

 

My .s3db files are still there, but when I open N1MM from the desktop, it defaults like I have never set anything up. Isn't there a way I can Post past that and grab the original image and open it normally? This one is kicking my.... Behind. Its one of those days...

 

73,

Danny  NF4J

 

 

Sent: Thursday, August 13, 2020 at 12:30 PM
From: "AB2ZY" <akozak@...>
To: "N1MMLoggerPlus@groups.io" <N1MMLoggerPlus@groups.io>
Subject: Re: [N1MM+] Corrupt .INI Files

It isn’t really an error message. It is the same dialog that appears any time you start N1MM+ when there is no database pointer yet in the .ini file or that pointer is invalid. You have the option to create a new one from an old N1MM Classic .mdb file, create a new blank database, or open an existing .s3db file.

 

Browse the database directory to make sure your database is actually there and try to open that. If you still get the message, then it is corrupt.

 

Al

AB2ZY

 

From: N1MMLoggerPlus@groups.io [mailto:N1MMLoggerPlus@groups.io] On Behalf Of VE9AA - Mike
Sent: Thursday, August 13, 2020 1:18 PM
To: N1MMLoggerPlus@groups.io
Subject: Re: [N1MM+] Corrupt .INI Files

 

Danny, 

Hi. I mostly don't know what I'm talking about !(hi hi)

Better to get the straight p00p from someone like Rich/KI, Larry/K8Ut, Tom/N1MM and the gang on the Dev team.

I sorta had confused the question you asked with the answer I wrote, so don't put too much stock in it.

GL with the resolve.

Mike
On Thu, Aug 13, 2020 at 12:27 PM, Danny Bush wrote:

Hey Mike,

 

Thanks for the input. I was just going by what the pop up box was stating...using the .INI files as reference. I did not try Creating a New date base yet, as the box says if the error shows like it did, that it is likely corrupt. I tried the suggested fix as shown in the box but again, it did not resolve the issue. When I try copying the .BAK file in to the main .INI file, it will not take...its like the Main N1MM Logger.INI file is Locked down. 

 

I know Rich is familiar with this issue, Im hoping he can respond as well...

 

73,

Danny  NF4J


 
--
Mike VE9AA

 


Re: Corrupt .INI Files

Danny Bush
 

Correct,

All of my Configuration settings are gone...

73,
Danny Bush - NF4J

On 8/13/20, 12:48 AB2ZY <akozak@...> wrote:

Just so I understand for sure, all of your configuration settings (ports, winkey setup, mode control, etc. are gone? Or just that it no longer opens your default database?

 

Al

AB2ZY

 

From: N1MMLoggerPlus@groups.io [mailto:N1MMLoggerPlus@groups.io] On Behalf Of Danny Bush
Sent: Thursday, August 13, 2020 1:42 PM
To: N1MMLoggerPlus@groups.io
Cc: N1MMLoggerPlus@groups.io
Subject: Re: [N1MM+] Corrupt .INI Files

 

Al,

 

My .s3db files are still there, but when I open N1MM from the desktop, it defaults like I have never set anything up. Isn't there a way I can Post past that and grab the original image and open it normally? This one is kicking my.... Behind. Its one of those days...

 

73,

Danny  NF4J

 

 

Sent: Thursday, August 13, 2020 at 12:30 PM
From: "AB2ZY" <akozak@...>
To: "N1MMLoggerPlus@groups.io" <N1MMLoggerPlus@groups.io>
Subject: Re: [N1MM+] Corrupt .INI Files

It isn’t really an error message. It is the same dialog that appears any time you start N1MM+ when there is no database pointer yet in the .ini file or that pointer is invalid. You have the option to create a new one from an old N1MM Classic .mdb file, create a new blank database, or open an existing .s3db file.

 

Browse the database directory to make sure your database is actually there and try to open that. If you still get the message, then it is corrupt.

 

Al

AB2ZY

 

From: N1MMLoggerPlus@groups.io [mailto:N1MMLoggerPlus@groups.io] On Behalf Of VE9AA - Mike
Sent: Thursday, August 13, 2020 1:18 PM
To: N1MMLoggerPlus@groups.io
Subject: Re: [N1MM+] Corrupt .INI Files

 

Danny, 

Hi. I mostly don't know what I'm talking about !(hi hi)

Better to get the straight p00p from someone like Rich/KI, Larry/K8Ut, Tom/N1MM and the gang on the Dev team.

I sorta had confused the question you asked with the answer I wrote, so don't put too much stock in it.

GL with the resolve.

Mike
On Thu, Aug 13, 2020 at 12:27 PM, Danny Bush wrote:

Hey Mike,

 

Thanks for the input. I was just going by what the pop up box was stating...using the .INI files as reference. I did not try Creating a New date base yet, as the box says if the error shows like it did, that it is likely corrupt. I tried the suggested fix as shown in the box but again, it did not resolve the issue. When I try copying the .BAK file in to the main .INI file, it will not take...its like the Main N1MM Logger.INI file is Locked down. 

 

I know Rich is familiar with this issue, Im hoping he can respond as well...

 

73,

Danny  NF4J


 
--
Mike VE9AA

 


Re: Corrupt .INI Files

AB2ZY
 

Just so I understand for sure, all of your configuration settings (ports, winkey setup, mode control, etc. are gone? Or just that it no longer opens your default database?

 

Al

AB2ZY

 

From: N1MMLoggerPlus@groups.io [mailto:N1MMLoggerPlus@groups.io] On Behalf Of Danny Bush
Sent: Thursday, August 13, 2020 1:42 PM
To: N1MMLoggerPlus@groups.io
Cc: N1MMLoggerPlus@groups.io
Subject: Re: [N1MM+] Corrupt .INI Files

 

Al,

 

My .s3db files are still there, but when I open N1MM from the desktop, it defaults like I have never set anything up. Isn't there a way I can Post past that and grab the original image and open it normally? This one is kicking my.... Behind. Its one of those days...

 

73,

Danny  NF4J

 

 

Sent: Thursday, August 13, 2020 at 12:30 PM
From: "AB2ZY" <akozak@...>
To: "N1MMLoggerPlus@groups.io" <N1MMLoggerPlus@groups.io>
Subject: Re: [N1MM+] Corrupt .INI Files

It isn’t really an error message. It is the same dialog that appears any time you start N1MM+ when there is no database pointer yet in the .ini file or that pointer is invalid. You have the option to create a new one from an old N1MM Classic .mdb file, create a new blank database, or open an existing .s3db file.

 

Browse the database directory to make sure your database is actually there and try to open that. If you still get the message, then it is corrupt.

 

Al

AB2ZY

 

From: N1MMLoggerPlus@groups.io [mailto:N1MMLoggerPlus@groups.io] On Behalf Of VE9AA - Mike
Sent: Thursday, August 13, 2020 1:18 PM
To: N1MMLoggerPlus@groups.io
Subject: Re: [N1MM+] Corrupt .INI Files

 

Danny, 

Hi. I mostly don't know what I'm talking about !(hi hi)

Better to get the straight p00p from someone like Rich/KI, Larry/K8Ut, Tom/N1MM and the gang on the Dev team.

I sorta had confused the question you asked with the answer I wrote, so don't put too much stock in it.

GL with the resolve.

Mike
On Thu, Aug 13, 2020 at 12:27 PM, Danny Bush wrote:

Hey Mike,

 

Thanks for the input. I was just going by what the pop up box was stating...using the .INI files as reference. I did not try Creating a New date base yet, as the box says if the error shows like it did, that it is likely corrupt. I tried the suggested fix as shown in the box but again, it did not resolve the issue. When I try copying the .BAK file in to the main .INI file, it will not take...its like the Main N1MM Logger.INI file is Locked down. 

 

I know Rich is familiar with this issue, Im hoping he can respond as well...

 

73,

Danny  NF4J


 
--
Mike VE9AA

 


Re: PTT intermittent

WA8Y Steven
 

I have tried to hold the push to talk switch (foot switch) down but as soon as and N1MM gives the command, the push to talk is overridden to OFF.

Steven WA8Y


Re: Corrupt .INI Files

Danny Bush
 

Al,
 
My .s3db files are still there, but when I open N1MM from the desktop, it defaults like I have never set anything up. Isn't there a way I can Post past that and grab the original image and open it normally? This one is kicking my.... Behind. Its one of those days...
 
73,
Danny  NF4J

 
 
Sent: Thursday, August 13, 2020 at 12:30 PM
From: "AB2ZY" <akozak@...>
To: "N1MMLoggerPlus@groups.io" <N1MMLoggerPlus@groups.io>
Subject: Re: [N1MM+] Corrupt .INI Files

It isn’t really an error message. It is the same dialog that appears any time you start N1MM+ when there is no database pointer yet in the .ini file or that pointer is invalid. You have the option to create a new one from an old N1MM Classic .mdb file, create a new blank database, or open an existing .s3db file.

 

Browse the database directory to make sure your database is actually there and try to open that. If you still get the message, then it is corrupt.

 

Al

AB2ZY

 

From: N1MMLoggerPlus@groups.io [mailto:N1MMLoggerPlus@groups.io] On Behalf Of VE9AA - Mike
Sent: Thursday, August 13, 2020 1:18 PM
To: N1MMLoggerPlus@groups.io
Subject: Re: [N1MM+] Corrupt .INI Files

 

Danny, 

Hi. I mostly don't know what I'm talking about !(hi hi)

Better to get the straight p00p from someone like Rich/KI, Larry/K8Ut, Tom/N1MM and the gang on the Dev team.

I sorta had confused the question you asked with the answer I wrote, so don't put too much stock in it.

GL with the resolve.

Mike
On Thu, Aug 13, 2020 at 12:27 PM, Danny Bush wrote:

Hey Mike,

 

Thanks for the input. I was just going by what the pop up box was stating...using the .INI files as reference. I did not try Creating a New date base yet, as the box says if the error shows like it did, that it is likely corrupt. I tried the suggested fix as shown in the box but again, it did not resolve the issue. When I try copying the .BAK file in to the main .INI file, it will not take...its like the Main N1MM Logger.INI file is Locked down. 

 

I know Rich is familiar with this issue, Im hoping he can respond as well...

 

73,

Danny  NF4J


 
--
Mike VE9AA

 


Re: Corrupt .INI Files

AB2ZY
 

It isn’t really an error message. It is the same dialog that appears any time you start N1MM+ when there is no database pointer yet in the .ini file or that pointer is invalid. You have the option to create a new one from an old N1MM Classic .mdb file, create a new blank database, or open an existing .s3db file.

 

Browse the database directory to make sure your database is actually there and try to open that. If you still get the message, then it is corrupt.

 

Al

AB2ZY

 

From: N1MMLoggerPlus@groups.io [mailto:N1MMLoggerPlus@groups.io] On Behalf Of VE9AA - Mike
Sent: Thursday, August 13, 2020 1:18 PM
To: N1MMLoggerPlus@groups.io
Subject: Re: [N1MM+] Corrupt .INI Files

 

Danny, 

Hi. I mostly don't know what I'm talking about !(hi hi)

Better to get the straight p00p from someone like Rich/KI, Larry/K8Ut, Tom/N1MM and the gang on the Dev team.

I sorta had confused the question you asked with the answer I wrote, so don't put too much stock in it.

GL with the resolve.

Mike
On Thu, Aug 13, 2020 at 12:27 PM, Danny Bush wrote:

Hey Mike,

 

Thanks for the input. I was just going by what the pop up box was stating...using the .INI files as reference. I did not try Creating a New date base yet, as the box says if the error shows like it did, that it is likely corrupt. I tried the suggested fix as shown in the box but again, it did not resolve the issue. When I try copying the .BAK file in to the main .INI file, it will not take...its like the Main N1MM Logger.INI file is Locked down. 

 

I know Rich is familiar with this issue, Im hoping he can respond as well...

 

73,

Danny  NF4J


 
--
Mike VE9AA


Re: Corrupt .INI Files

VE9AA - Mike
 

Danny, 

Hi. I mostly don't know what I'm talking about !(hi hi)

Better to get the straight p00p from someone like Rich/KI, Larry/K8Ut, Tom/N1MM and the gang on the Dev team.

I sorta had confused the question you asked with the answer I wrote, so don't put too much stock in it.

GL with the resolve.

Mike

On Thu, Aug 13, 2020 at 12:27 PM, Danny Bush wrote:
Hey Mike,
 
Thanks for the input. I was just going by what the pop up box was stating...using the .INI files as reference. I did not try Creating a New date base yet, as the box says if the error shows like it did, that it is likely corrupt. I tried the suggested fix as shown in the box but again, it did not resolve the issue. When I try copying the .BAK file in to the main .INI file, it will not take...its like the Main N1MM Logger.INI file is Locked down. 
 
I know Rich is familiar with this issue, Im hoping he can respond as well...
 
73,
Danny  NF4J

 
--
Mike VE9AA


Re: Special WAE Coloring..

Rich Seifert
 



On Aug 12, 2020, at 9:00 AM, VE9AA - Mike <ve9aa@...> wrote:

Hey Rich, 

I respectfully disagree with your opinion on the black stations in the bandmap.  No matter - we all operate differently and that's cool. Life would be dull if we were all clones.

I don't see the worked stations as grey/gray any different than a USA or ASIAN station in WAE.  I still like to see them there, so, for one thing, I don't CQ on top of them.


The bandmap would be deluged with non-workable stations if I displayed USA/Asian/etc. during a contest like WAE. 

Why would you NOT want to see grey stations in the bandmap ?(workable or otherwise).  The Ctrl-up (or down) arrows are not forcing you to stop there.

Isn't it valuable to know so-n-so is on a certain frequency (practically regardless of contest, not just WAE).  There is always some information to be gleaned by having that at hand.


I find that it just clutters up the bandmap, particularly if I have worked hundreds (or thousands) of stations (all of which are now non-workable).

I never turn this feature off, but I wonder if it MIGHT work in your case?
https://n1mmwp.hamdocs.com/manual-windows/telnet-window/


As I said, I *ALWAYS* turn off “show non-workable spots”, but for some reason this doesn’t work in WAE. Stations that I have worked AND exchanged 10 QTCs with still show up as gray.

And, since I only display spots originating from my region (Western US/CA), if there is someone on the frequency, I will hear them (and avoid calling CQ on top of them) even if they aren’t showing in the bandmap.

Show non-workable spots and QSYing wipes call and puts it in the bandmap


Rich KE1B


Re: Corrupt .INI Files

Danny Bush
 

Hey Mike,
 
Thanks for the input. I was just going by what the pop up box was stating...using the .INI files as reference. I did not try Creating a New date base yet, as the box says if the error shows like it did, that it is likely corrupt. I tried the suggested fix as shown in the box but again, it did not resolve the issue. When I try copying the .BAK file in to the main .INI file, it will not take...its like the Main N1MM Logger.INI file is Locked down. 
 
I know Rich is familiar with this issue, Im hoping he can respond as well...
 
73,
Danny  NF4J

 
 
Sent: Thursday, August 13, 2020 at 10:21 AM
From: "VE9AA - Mike" <ve9aa@...>
To: N1MMLoggerPlus@groups.io
Subject: Re: [N1MM+] Corrupt .INI Files
Corrupt .ini files and a corrupt database are *(I believe) 2 different animals Danny.

Choosing "create new database" did not work?

Was there an issue before this popup?

The .ini file is where your specific settings are found for radio, keyers, com ports, etc. etc
The databases are where your logs are found.


On Thu, Aug 13, 2020 at 11:43 AM, Danny Bush wrote:
I received the attached error when trying to open N1MM on my Laptop this morning. I attempted to complete the repair as shown in the dialogue box but No Joy...it does not resolve the error. Any Suggestions?

73,
Danny  NF4J

 
--
Mike VE9AA


Re: Corrupt .INI Files

VE9AA - Mike
 

Corrupt .ini files and a corrupt database are *(I believe) 2 different animals Danny.

Choosing "create new database" did not work?

Was there an issue before this popup?

The .ini file is where your specific settings are found for radio, keyers, com ports, etc. etc
The databases are where your logs are found.


On Thu, Aug 13, 2020 at 11:43 AM, Danny Bush wrote:
I received the attached error when trying to open N1MM on my Laptop this morning. I attempted to complete the repair as shown in the dialogue box but No Joy...it does not resolve the error. Any Suggestions?

73,
Danny  NF4J

 
--
Mike VE9AA


Corrupt .INI Files

Danny Bush
 

I received the attached error when trying to open N1MM on my Laptop this morning. I attempted to complete the repair as shown in the dialogue box but No Joy...it does not resolve the error. Any Suggestions?

73,
Danny  NF4J


Re: New installation N1MM+

Ruud Ivens
 

Hans, Rich, Larry and Drew,

I thank you all for the suggestions and help to solve my problem with the new installation of N1MM+.

It is solved now and N1MM+ is working as intended!

73, Ruud PG1R


Op 12-8-2020 om 16:37 schreef Drew Vonada-Smith K3PA:
To clarify...

C:\users\<windows login>\Documents\N1MM Logger+

73,
Drew K3PA
-- 
Ruud Ivens PG1R
VERON Coordinator IARUMS


Re: Query from TZ4AM on need to add CW column on data entry window

Jeff in Mali:
 

Hi Rich:

These all the error messages I got as I followed through your process.

"“Reload \supportFiles\wl_cty.dat.complete”
Msg  Set up your station data on config station. DONE
Installed new version
Error message  You must change database name
Closed restarted. Long error thread came up.
Restarted; opened with Phone col ONLY
Error message: A possible error has occurred [UpdateContestingGrid]. Please stop and restart N1MM… And inform dev. Team
Tried to set up contest and labeled as DX. Does not give me the OK. I go to files page and just click OK and it gives error messages saying strings are not there."

But when I completed your process I got an empty data base.  

I then reopened my log going back to 2015 and it appears complete, including the last contact. 

I followed your instructions contained in an earlier email for contest definition and got CW and phone columns instead of just phone.

Thank you for your kindness and considerable help.

I may be back later to figure out how to log FT8 contacts. People want me to get on FT8 and not knowing how to log contacts is part of the reason that I haven't gotten on.

If you need Mali on any band, pls let me know and we can sked.

73,

Jeff
skype jeffdorseymia
WA +223 7653 6775

-----Original Message-----
From: ve3ki <ve3iay@...>
To: N1MMLoggerPlus@groups.io
Sent: Wed, Aug 12, 2020 2:50 pm
Subject: Re: [N1MM+] Query from TZ4AM on need to add CW column on data entry window

When you see that message, the first thing you should do is try the "Create new database" option. Select that option and then click on "OK". If the program starts up normally, including all your configuration, radio control settings, etc., except that you have an empty database with no contacts and no contest logs in it, then the original problem was caused by a corrupted database file. In such cases, switching to a backup ini file will not do any good, because using the backup ini file the program will try to open the original (corrupted) database file and that will fail.

If this is what has happened, there are ways to recover the data in the corrupted database that we can help you with.

A common cause for damaged or corrupted database files is the use of cloud syncing programs like OneDrive and Google Drive. If one of these programs is allowed to make a backup or sync your database file while the N1MM+ program has that database file open, the backup or synced copy will likely be corrupted. The folder in which your database files are stored should be excluded from any such automated backup or cloud storage procedure. Make backups of your database files, but do it manually, and only when the N1MM+ program is not running, never when N1MM+ is open.

If the program starts up with a new database file but all of your configuration settings (mostly the settings in the Configurer) are gone, then the problem was probably a missing or damaged .ini file. In this situation, what you can try is this:
1. Close down N1MM+; none of the rest of this will work if the program is open when you do it;
2. If there is a file named "n1mm logger.ini" (make sure Windows File Explorer is set to show file name extensions, otherwise the file name will look like just "n1mm logger"), and rename that file to something else, like "n1mm logger.ini.bak";
3. Find one of the day of the week.bak files from a date *before* you started having problems;
4. Make a copy of that file and rename it to just n1mm logger.ini .
5. Start up N1MM+.
If this works, the problem was a missing or damaged ini file, and starting from the backup file was all that was needed. Check to make sure that the correct database file and contest log is open and you should be good to go.

73,
Rich VE3KI


On Wed, Aug 12, 2020 at 09:59 AM, Jeff in Mali: wrote:
Dear N1MM+ Group:
 
My computer crashed and now when it opens, I get a box:
 
The error message says: Data Base creation in a little box, with the options of 
1) converting an existing .mdb database, 
2) Create a new data base
3) Open and existing base.
 
The choices are OK or Cancel. I've been hitting cancel.
 
There is also a smaller box with the error message instructions:
 
If this box appears unexpectedly, then your N1MM Logger.ini file may be corrupted. Press Cancel, then go to your N1MM installation folder and copy one of the N1MM Logger.ini.[DayofWeek].bak files to N1MM Logger.ini.
 
What do I do?
 
I have found various bak files including one for today.  Do I just rename that file as N1MM Logger.ini and replace the file with that same name?
 
73,
 
Jeff



-----Original Message-----
From: Jeff in Mali: <tz4am@...>
To: N1MMLoggerPlus@groups.io <N1MMLoggerPlus@groups.io>
Sent: Mon, Aug 10, 2020 3:14 pm
Subject: Query from TZ4AM on need to add CW column on data entry window

Dear N1MM Logger Group:
 
I use N1MM+ for all my contacts from Mali.
 
Currently, I installed a second version on my work computer simply to be able to see my contacts without firing up the computer in the shack. I installed the latest version of the program on that computer. All that shows up on the left of the QSO input window is a Phone column and the bands.
 
How do I get the CW column t come up? It comes up on the same program installed on my shack computer?
 
With kind regards,
 
Jeff Dorsey
TZ4AM  in Mali  (K1MMB Miami FL)


-----Original Message-----
From: N1MMLoggerPlus@groups.io Group Moderators <N1MMLoggerPlus+owner@groups.io>
To: tz4am@...
Sent: Mon, Aug 10, 2020 2:09 pm
Subject: Welcome to N1MMLoggerPlus@groups.io

Hello,
Welcome to the N1MMLoggerPlus@groups.io group at Groups.io, a free, easy-to-use email group service. Please take a moment to review this message.
To learn more about the N1MMLoggerPlus@groups.io group, please visit https://groups.io/g/N1MMLoggerPlus
To start sending messages to members of this group, simply send email to N1MMLoggerPlus@groups.io
If you do not wish to belong to N1MMLoggerPlus@groups.io, you may unsubscribe by sending an email to N1MMLoggerPlus+unsubscribe@groups.io
To see and modify all of your groups, go to https://groups.io

Regards,
The N1MMLoggerPlus@groups.io Moderator


Two digital interface devices

Srivathsa Satya
 

Has anyone interfaced two different digital interface devices, i.e. a WinKeyer USB as well as a Rigblaster (SO1V)?  Can it be done and how?
Vatsa


Fw: Re[2]: [N1MM+] PTT intermittent

Larry K8UT
 

Steven

You're looking in the wrong place.


-larry (K8UT)

------ Original Message ------
From: "WA8Y Steven" <stevenlinley@...>
Sent: 2020-08-12 10:36:56 PM
Subject: Re: [N1MM+] PTT intermittent

Thanks Larry,
Unfortunately, it does cure my problem.
The WinKey is on COM 7 and it is configured like this;
DTR (pin4)  RTS (pin 7)  VFO Nr
Always On   Always Off            1
PTT Delay (msec)
50
__Allow ext interrupts     
x Winkey
Two Radio Protocol   Foot Switch (pin 6)
None                             None                                                               


Re: Key assignment for /P (portable stations)

Kurt H. <kurt.hess3425@...>
 

Hi Hank

thanks, I'll give it a try.

73s
Kurt HB9XCL


Re: Key assignment for /P (portable stations)

Kurt H. <kurt.hess3425@...>
 

John,
Thanks.
Kurt


Re: PTT intermittent

Ron
 

Steven, Mine is the same except VFO # = Both

Ron, WV4P


On Wed, 12 Aug 2020 at 21:37, WA8Y Steven <stevenlinley@...> wrote:

Thanks Larry,
Unfortunately, it does cure my problem.
The WinKey is on COM 7 and it is configured like this;
DTR (pin4)  RTS (pin 7)  VFO Nr
Always On   Always Off            1
PTT Delay (msec)
50
__Allow ext interrupts     
x Winkey
Two Radio Protocol   Foot Switch (pin 6)
None                             None                                                               

4801 - 4820 of 57695