|
Re: Rig Flipping from LSB DATA (RTTY) to CW
Danny Bush
On 8/18/20, 02:50 "John Bednar via groups.io" <k3ct@...> wrote:
|
||
|
|
||
|
Re: CW speeds in Run and S&P modes
#n1mm
ve3ki
The two Entry windows can have different CW speeds. Changing the speed in one has no effect on the other.
toggle quoted messageShow quoted text
73, Rich VE3KI
On Tue, Aug 18, 2020 at 06:33 AM, Geoff Way wrote:
Maybe what Slav hasn't told us yet is that he's running SO2R...
|
||
|
|
||
|
Re: Keyboard shortcuts with spectrum display window
Leave the bandmap open and make it small if you are not interested in seeing it.
Tom - N1MM
|
||
|
|
||
|
Keyboard shortcuts with spectrum display window
I am just starting to use the spectrum display window using an SDRplay RSP1A connected to the IF OUT of my K3S. I am using VA2FSQ's Win4K3Suite as the source of the spectrum data The SHIFT-UP/DN keyboard shortcut is similar to the bandmap's CTL-UP/DN to QSY to the next station spotted except that it goes to the next signal received rather than the next station spotted, as understand it. I use the bandmap keyboard shortcuts to QSY to the next spot, using both the CTL-UP/DN to go to the next spot or CTL-ALT-UP/DN to go to the next new mult. Both populate the entry window with the call of the station spotted. Can that functionality be added to the spectrum display window? Jim N7US
|
||
|
|
||
|
Re: CW speeds in Run and S&P modes
#n1mm
Maybe what Slav hasn't told us yet is that he's running SO2R...
toggle quoted messageShow quoted text
Maybe he likes to run at 38wpm or more but knows that using that speed to answer on S&P might not give him the results he wants. Does N1MM+ allow Entry Window "A" to be set at one speed and EW "B" a different speed, and if not, should that be a feature request for SO2R? -KA1IOR
-------- Original Message --------
|
||
|
|
||
|
Re: Version for RDAC 2020 with updated RDAC.sec file.
Gilles DESANSAC F6IRA
Even no plenty time to full entry into RDAC special dev was just
awsome work. Thanks. Gilles F6IRA Le 14/08/2020 à 01:55, NA3M Nick a
écrit :
|
||
|
|
||
|
Re: Audio Tab DVR Set Up Help Requested
John Bednar
Bill,
As shown below, the first dropdown option is for SO1V/SO2V and the first SO2R option is for a single sound card.
Either of these selections would not work for SO2R with two soundcards in mono.
John, K3CT
-----Original Message-----
Hello John,
I have two sound cards, both are wired mono to each radio. One is to an FT1000MP and the other to a K3.
I selected option 1 in the audio options. And set radio 1 to one of the sound cards and radio 2 to the other sound card.
Bill K3SV
-------------------------------------------------- From: "John Bednar via groups.io" <k3ct@...> Sent: Sunday, August 16, 2020 10:43 PM To: <N1MMLoggerPlus@groups.io> Subject: Re: [N1MM+] Audio Tab DVR Set Up Help Requested
> > Bill, > > It's not clear how many soundcards you wired to your radios and which > option did you select? > > If it was two soundcards were they wired for mono? > > John, K3CT > > > -----Original Message----- > From: N1MMLoggerPlus@groups.io [mailto:N1MMLoggerPlus@groups.io] On Behalf > Of Bill Gillenwater > Sent: Sunday, August 16, 2020 2:59 PM > To: N1MMLoggerPlus@groups.io > Subject: Re: [N1MM+] Audio Tab DVR Set Up Help Requested > > Do a lot of these issues go away if you move to Windows 10? I notice > in the Configuration menu using Windows 10 that there is a "Use N1MM > Audio" or something to that affect. I figured with two sound cars, the > one "on-board" and a separate SoundBlaster card I could direct the > audio to Radio 1 and Radio 2. In the Configuration "Audio" settings it > gives you options for two different sound cards. But I cannot get both > to work with their specific radio. One of the other will work, but not > both? > > Thanks, > 73 Bill > > Quoting Bill Gillenwater <k3sv@...>: > >> So, can you run two sound cards in SO2R, one sound card for each >> radio? I'm using XP and it doesn't appear that I can activate, or >> specify, a sound card for a specific radio? >> >> thanks, >> Bill K3SV >> >> >> >> From: ve3ki >> Sent: Saturday, August 15, 2020 8:33 AM >> To: N1MMLoggerPlus@groups.io >> Subject: Re: [N1MM+] Audio Tab DVR Set Up Help Requested >> >> >> This depends on the sound card and its driver. Some sound cards do >> not have this capability. Call up the "Properties" for the sound >> card's microphone input in the Control Panel, and look for a check >> box called "Listen to this device" under the Listen tab, if there is >> one. >> >> 73, >> Rich VE3KI >> >> >> On Sat, Aug 15, 2020 at 08:05 AM, Mpridesti wrote: >> >> Rich >> >> Related challenge here: need to configure the sound card and >> transfer from mic input port to output using Windows 7. >> >> I understand that in Win 7, Microsoft changed a lot in the sound >> card. Could offer specific instructions on configuring? >> >> >> Regards, >> >> Mark, K1RX >> >> >> >> On Aug 15, 2020, at 7:56 AM, ve3ki <ve3iay@...> wrote: >> >> >> The KX3 does not have a USB connector. What you are referring to >> is most likely a KXUSB USB-to-serial adapter connected to the KX3's >> ACC1 jack. This only carries radio control data; it cannot carry >> audio. >> >> To use N1MM+'s digital voice recordings (wav files), you need to >> connect your computer sound card's output to the KX3's mic jack. >> This of course usurps the normal microphone connection. To use a >> microphone, you would need to connect the microphone to the sound >> card, and the sound card needs to be configured to transfer its >> microphone input directly to its output. This will probably >> introduce a digital processing delay between the microphone input >> and the output from the radio, which means you will have to turn the >> radio's monitor off to avoid hearing your own voice delayed while >> you are speaking. >> >> The KX3 does have a built-in DVR with two recordable messages. >> You can use CAT commands to transmit these messages from function >> keys. This does not require any additional connections other than >> your KXUSB, but it is limited to only the two memories in the radio. >> >> 73, >> Rich VE3KI >> >> >> On Sat, Aug 15, 2020 at 12:34 AM, Timothy Eklin wrote: >> >> The only connection between the radio and the computer is a >> USB cable. Is there other hardware or cables needed? >> >> >> Virus-free. www.avg.com >> >> >> >> > > > > > > > > > > -- > This email has been checked for viruses by AVG. > https://www.avg.com >
|
||
|
|
||
|
Re: SARTG WW RTTY
Julian GW4JBQ
Thanks for the reply Les,
toggle quoted messageShow quoted text
All sorted now, as Knut suggests the robot does it all. 73 de (GW4JBQ)
On 18 Aug 2020, at 08:57, Les Elliott via groups.io <g4ogb@...> wrote:
|
||
|
|
||
|
Re: SARTG WW RTTY
Les Elliott
If you must....export an ADI file, delete all ‘other band’ qsos
create a new database, set up for the same contest, import
your ADI file, rescore.
Les, G4OGB
Single
OP All Band entries are allowed to put in a Single Band Entry as well as the all
band, anyone have any suggestion for the best way to export and rescore just the
single band bit of the log from N1MM+
|
||
|
|
||
|
Re: CW speeds in Run and S&P modes
#n1mm
John Bednar
Slav,
toggle quoted messageShow quoted text
We agree than an "initial" S&P CW speed is of little value when you change to accommodate the sender. John, K3CT
-----Original Message-----
From: N1MMLoggerPlus@groups.io [mailto:N1MMLoggerPlus@groups.io] On Behalf Of EI6KW Sent: Tuesday, August 18, 2020 3:05 AM To: N1MMLoggerPlus@groups.io Subject: Re: [N1MM+] CW speeds in Run and S&P modes #n1mm On Mon, Aug 17, 2020 at 11:56 AM, John Bednar wrote: Thanks John, you've confirmed my guess. That's the point. Slav, EI6KW
|
||
|
|
||
|
Re: Rig Flipping from LSB DATA (RTTY) to CW
John Bednar
Tim,
Check the Config, Mode Control tab window. The right side of the window is used to select the radio mode to associate to RTTY and Digi modes.
John, K3CT
From: N1MMLoggerPlus@groups.io [mailto:N1MMLoggerPlus@groups.io] On Behalf Of timgep via groups.io
Sent: Tuesday, August 18, 2020 2:04 AM To: N1MMLoggerPlus@groups.io Subject: [N1MM+] Rig Flipping from LSB DATA (RTTY) to CW
I tried to jump into the SARTG RTTY contest last weekend, and ran into a couple problems. My rig is a TS-590SG, and my computer runs Windows 10 Pro, and I use N1MM + MMTTY. Everything rand great in the Volta RTTY contest in May. Seems like the "PTT Via Radio Command Digital Mode" box got checked, which prevented audio from going to my rig. Turned that off, and fixed that.
|
||
|
|
||
|
Re: SARTG WW RTTY
Julian GW4JBQ
Thanks Knut,
toggle quoted messageShow quoted text
I think it’s just me being thick. I went back to it yesterday evening and realised that it wasn’t a test log but related to my contest log ie. gw4jbq.log. I did as you said and all is perfect so thank you for your help and thank you for the multiplier in the contest. Julian (GW4JBQ)
On 18 Aug 2020, at 07:36, Knut Meland <knut.meland@getmail.no> wrote:
|
||
|
|
||
|
Re: CW speeds in Run and S&P modes
#n1mm
On Mon, Aug 17, 2020 at 11:56 AM, John Bednar wrote:
Thanks John, you've confirmed my guess. That's the point. Slav, EI6KW
|
||
|
|
||
|
Re: SARTG WW RTTY
Check http://www.sartg.com/contest/wwrules.htm
toggle quoted messageShow quoted text
I don't quite understand what you mean by "the test.log bit". In the rules check under headline Email log submissions. Hopfully you find the answer there. If not, try the reflector again. 73 de Knut LA9RY Den 17.08.2020 17.12, skrev Julian GW4JBQ:
Many Thanks for your reply Knut, that sounds quite logical, could you expand a bit on the test.log bit as I have not heard of this before.
|
||
|
|
||
|
Rig Flipping from LSB DATA (RTTY) to CW
timgep
I tried to jump into the SARTG RTTY contest last weekend, and ran into a couple problems. My rig is a TS-590SG, and my computer runs Windows 10 Pro, and I use N1MM + MMTTY. Everything rand great in the Volta RTTY contest in May. Seems like the "PTT Via Radio Command Digital Mode" box got checked, which prevented audio from going to my rig. Turned that off, and fixed that.
I put the Mode Control as "Always RTTY". Whenever I start the software, or type RTTY into the callsign field, my rig changes to CW. Why is it doing this? Tnx & 73, Tim N6GP
|
||
|
|
||
|
Re: N1MM/MMTTY with TS590SG and Winkeyer3 for RTTY
Jim W7RY
Yup!
toggle quoted messageShow quoted text
No worries Larry. I love my three... two for FSK (for SO2R), and one for CW. Thanks 73 Jim W7RY On 8/17/2020 9:48 AM, Larry K8UT wrote:
|
||
|
|
||
|
Re: DupeQSOMinutesAgo
Ian MacPherson <ian@...>
Tom, We are running a small intra-club contest to introduce the new hams in the club into hf operating, contesting and using N1MM for logging. When the numbers are low we are thinking of letting them log a dupe, after say 10 minutes, rather than getting bored waiting for the next period to start. However we also want to alert them for the procedure for dupes. Initial reaction for most is not to log it. However if the other station did not log the original then you need to log it for both stations to have a legit contact in their logs. On the other hand we need to train the new ops how to handle a dupe. Sometimes there is a relatively long time wasted when the other op thinks it is a dupe (but you don't) and you want to get a legit contact. I see NA3M has tested and answered further up the page so I will send him my udc file. Thanks, Ian
On 18/08/2020 12:38 am, Tom - N1MM
wrote:
I don't know the answer to the original poster's question. i.e. why it is not working as he expects. Wait fo NA3M or G4OGB to answer that.
|
||
|
|
||
|
Intermittent PTT solved
WA8Y Steven
Intermittent problem are always the worst.
And like in this case, they can be so misleading. The problem has nothing to do with N1MM+ . Thank you Larry K8UT, Andy KU7T and other who took time to help me. The problem was in my Amplifier. And it presented itself when the problem became permanent. I suspect that during CW Contesting I got too much RF into the Software (Arduino or Rpi) . I made a new SD card disk image of the software for the Raspberry Pi. I have to rebuild all my ATU memories for the Arduino. That might take a few days. But PTT from any macro seems to work just fine now.
|
||
|
|
||
|
Re: Function keys activate rig but don't transmit any audio
Most of the answer seem to have you looking at the sound card functions and assignments in Windows. Have you also checked that the correct sound device is still selected in N1MM? When windows reenumerates sound devices it tends to impact the application as well. Drew K3PA
|
||
|
|
||
|
Re: N1MM/MMTTY with TS590SG and Winkeyer3 for RTTY
Danny Bush
Thanks Larry,
I am an Fldigi, N1MM and MMTTY user that also has (2) WKUSB and (1) WKMini Winkeyer3's. The digital interfaces I use really depends on the Contest and Mode I am working...so I use a combination of them as you can see.
The above WKUSB's are on the (2) TS590SG's in my shack and the WKMini is something I have been playing with on my portable rig - a Kenwoord TS480SAT, which is the rig I would interface with the Mortty, and why I would likely choose the Fldigi NanoIO Sketch. I'm about to grab one from your website so unless you have any other suggestions, I really appreciate your help Larry...I enjoy having the hardware that makes what we do all come together.
73,
Danny NF4J
Sent: Monday, August 17, 2020 at 1:33 PM
From: "Larry K8UT" <K8UT@...> To: N1MMLoggerPlus@groups.io Subject: Re: [N1MM+] N1MM/MMTTY with TS590SG and Winkeyer3 for RTTY Danny,
The answer is a qualified yes, with the advice that you should not allow a cheap keyer to be the decision-making factor on which digital package you operate.
Finally - keep in mind that if you purchase Mortty with nanoIO pre-installed and later regret that decision, flashing Mortty with one of the other two options is a 60 second exercise.
-larry (K8UT)
------ Original Message ------
From: "Danny Bush" <NF4J@...>
Sent: 2020-08-17 2:08:10 PM
Subject: Re: [N1MM+] N1MM/MMTTY with TS590SG and Winkeyer3 for RTTY
|
||
|
|
