Date   
Re: Windows do not keep position

Max NG7M
 

I would add/track this finding by opening a trouble ticket... I have really liked seeing the tickets I have opened get tracked and fixed, including suggestions:

https://n1mmwp.hamdocs.com/support/trouble-ticket/

If you add it, it keeps someone else from transcribing into the tracking system.

Max NG7M

Re: SO2R SSB 2 KB w Flex - How done?

VE9AA - Mike
 

Andy, (or anyone)

I read the link on AHK you posted, but didn't see the exact example Kari and I would possibly need. I only gave it a cursory look, so maybe missed it.
Could AHK do this:
Take a single key (let's say it's the PrintScreen Key for sake of argument) and make it do CTRL+LEFT ARROW? (or CTRL+RIGHT ARROW) ?

ie: can I map a double key press to a single key press?

Ctrl+whichever arrow works perfectly for CW Paddle focus,(or footswitch focus) but I agree...it's tiring in a long contest.
If I could redo 2 seldom or unused keys for paddle focus (CW) or for footswitch focus (in SSB) contests, where immediately after transmitter key down, was going to be live audio from the op and not a F key, this would also work well if doable.

Many thanks for the advice.

Mike VE9AA

On Mon, Mar 30, 2020 at 11:47 AM, Andy (KU7T) wrote:
Hi Kari, 
 
hardware solution is doable, and software also. The key mapping you would do in AutoHotkey (https://n1mmwp.hamdocs.com/appendices/third-party-software/)
 
73
Andy
KU7T
 

 
--
Mike VE9AA

Re: Spectrum display - frequency range

Knut Meland
 

Problem solved.

Spectrum display in Logger+ seems to follow the band edge setting in the IC-7300.

73 de Knut LA9RY

Den 29.03.2020 16.11, skrev ART W2NRA:

Hi Knut,

I don’t know which setup your are using, but if it’s with an IC-7610 just tune up to the SSB frequency and the Spectrum Display will follow. I think it’s the same with the IC-7300.

FYI I have my IC-7610 setup with dual Spectrum Displays Vertically in place of the Bandmaps.  Besides displaying callsigns I can see which are active.

73, Art W2NRA
CWOPS #1955

On Mar 29, 2020, at 4:21 AM, Knut Meland <knut.meland@...> wrote:



I am playing around in the CQ WPX SSB contest. Using the Spectrum window causes a problem. I get the freqyency window 7000-7030 and can't figure out how to change it to the SSB portion of the band. Tried + and -  in the left of the spectrum window without response. 

80 meters band is as bad as 40 meters.

Using last version of N1MM. Rig is IC-7300.
Any idea?
73 de Knut LA9RY

Re: SO2R SSB 2 KB w Flex - How done?

Andy (KU7T)
 

Hi Kari, 

hardware solution is doable, and software also. The key mapping you would do in AutoHotkey (https://n1mmwp.hamdocs.com/appendices/third-party-software/)

73
Andy
KU7T


From: N1MMLoggerPlus@groups.io <N1MMLoggerPlus@groups.io> on behalf of Kari Gustafsson SM0HRP <smnollhrp@...>
Sent: Sunday, March 29, 2020 1:39 PM
To: N1MMLoggerPlus@groups.io <N1MMLoggerPlus@groups.io>
Subject: Re: [N1MM+] SO2R SSB 2 KB w Flex - How done?
 
You are right that magic button is needed. Dennid W1UE hinted on a FS PTT solution I will look into.More to come...

Re: CWOPS.mc file

Jim N7US
 

Great!  See you in the CWTs. 

Jim N7US

On Sun, Mar 29, 2020, 10:21 PM John Becker <johnb3030@...> wrote:
Thanks to all for the suggestions. I have resolved the problem!

John

Re: CWOPS.mc file

John Becker
 

Thanks to all for the suggestions. I have resolved the problem!

John

Re: SO2R SSB 2 KB w Flex - How done?

Kari Gustafsson SM0HRP
 

You are right that magic button is needed. Dennid W1UE hinted on a FS PTT solution I will look into.More to come...

Re: SO2R SSB 2 KB w Flex - How done?

Kari Gustafsson SM0HRP
 

OK that could be a solution. Is this done in Windows or N1MM? 

Re: band button in entry window, fixed

gksmith_1
 

Re: Spectrum display - frequency range

ART W2NRA
 

Hi Knut,

I don’t know which setup your are using, but if it’s with an IC-7610 just tune up to the SSB frequency and the Spectrum Display will follow. I think it’s the same with the IC-7300.

FYI I have my IC-7610 setup with dual Spectrum Displays Vertically in place of the Bandmaps.  Besides displaying callsigns I can see which are active.

73, Art W2NRA
CWOPS #1955

On Mar 29, 2020, at 4:21 AM, Knut Meland <knut.meland@...> wrote:



I am playing around in the CQ WPX SSB contest. Using the Spectrum window causes a problem. I get the freqyency window 7000-7030 and can't figure out how to change it to the SSB portion of the band. Tried + and -  in the left of the spectrum window without response. 

80 meters band is as bad as 40 meters.

Using last version of N1MM. Rig is IC-7300.
Any idea?
73 de Knut LA9RY

Re: CWOPS.mc file

n7wy
 

John, Larry, and the other John -
I suspect a lot of CWT participants, CWops members and others, have been using a function key file created months ago.  Hence, we don't even bother trying to load a CWTS.mc file since N1MM's slick design handles this automatically from one CWT to the next.  Additionally, the mechanism for loading a .MC file from the Associated Files tab is relatively recent.
Keep up honing the great N1MM logger+ application, we love it !
Bob R - N7WY

Windows do not keep position

Gilbert Baron W0MN
 

  1. Set up positions on 2 different displays
  2. TOOLS/Save window positions
  3. Terminate 

 

When I restart some positions are SLIGHTLY off from original settings. Tools restore windows position DOES get them back EXACTLY where they were when I saved them but I do not understand why that is needed if I want it to come back to the way it was when I ended the program. Windows programs should do that. Thankfully for TOOLS/RSTORE POSITIONS I is not a big deal but wonder why it happens.

 

Outlook Desktop Gil W0MN

Hierro Candente Batir de Repente

44.08226 N 92.51265 W EN34rb

 


--
W0MN Rochester, MN

Re: N1MM+ Spectrum/Waterfall via soundcard #spectrum

brus-per.hogstedt@...
 

Thank you, Rich. So that was the obvious thing I missed :)
Will try your soution asap, just waiting for the Waterfall Bandmap group admins to approve my subscription.

73's
Bruce, SM6EIK

Re: band button in entry window, fixed

John Bednar
 

Jerry,

 

I do see something odd occurring when the Bandmap window is open and the program is closed. I will look at this.

 

I just tested without restarting and the frequency by mode seems to be working correctly. For those that disagree check these items:

 

Do you have the contest set for digital modes? Open the contest dialog and look at the MODE dropdown. Is it set to a mode that includes “digital”?

I have the left hand side of this window set to “Use contest or radio mode”. Other settings may also be OK, just noting my setting.

 

To store the digital frequency by mode the right hand side of the Config, Mode Control tab window needs to be set correctly for RTTY and digital modes.

 

If you type RTTY in the callsign box and press ENTER does the radio switch to the correct mode for RTTY? If not, select the correct setting until this is correct. The frequency store by mode can not work properly if you don’t associate the radio mode to program mode correctly.

 

If you type PSK31 in the callsign box and press ENTER does the radio switch to the correct mode for Digi modes? If not repeat the above.

 

Select a contest with CW, SSB, RTTY and PSK modes and set the mode selector to CW+SSB+digital.

 

I noted the last used frequency on two bands and switched mode on a different band. When I returned to those bands and mode the frequency was correct.

 

John, K3CT

 

 

From: N1MMLoggerPlus@groups.io [mailto:N1MMLoggerPlus@groups.io] On Behalf Of gksmith_1
Sent: Saturday, March 28, 2020 9:22 PM
To: N1MMLoggerPlus@groups.io
Subject: Re: [N1MM+] band button in entry window, fixed

 

Good evening all,

Well, with more testing I have found that I can create the problem of the 20 meter frequency button in the Band Panel defaulting to 14.200 MHz, and by the same token I can eliminate the problem.

What causes the problem is the Band Map window.

In RTTY mode, if the Band Map window is CLOSED when N1MM logger closes, then all band buttons in the Band Panel will be at the last used frequency when N1MM is started agaicw

n.,

However, by the same token, if the Band Map window is open when N1MM is closed, then the 20 meter frequency button in the Band Panel will default to 14.200 MHz.

I have run this exercise many times and it always follows that if the Band Map window is OPEN when closing N1MM, 20 meter Band Panel button will default to 14.200 MHz, and conversely when the Band Map window is closed when N1MM is closed, then, the next time N1MM is started, the 20 meter Band Panel button will be at the last used frequency.

I don't have a solution to the problem, but at least I can have a way to prevent it from giving me any more problems.

73 de WA3ZSC - Jerry

Re: F -"Rotor"

Tom Wagner (N1MM)
 

On 3/29/2020 7:51 AM, sp5ewx wrote:
I noticed in my F-keys on SSB F6 Rotor...Is it possible to configure F
key to control rotator???.I use alfaspid and it works perfect and I
use ALt+J or Alt+L to control it ...I didnt declare F6 as Rotator
myself it was as a prest from program...Any idea ??
Mike sp5ewx

F -"Rotor"

sp5ewx
 

I noticed in my F-keys on SSB F6 Rotor...Is it possible to configure F
key to control rotator???.I use alfaspid and it works perfect and I
use ALt+J or Alt+L to control it ...I didnt declare F6 as Rotator
myself it was as a prest from program...Any idea ??
Mike sp5ewx

Re: N1MM+ Spectrum/Waterfall via soundcard #spectrum

ve3ki
 

You need additional software to convert the I/Q data coming from the radio into spectrum data that can be displayed by N1MM+, such as N2IC's Waterfall Bandmap program (<https://groups.io/g/waterfallbandmap>).

73,
Rich VE3KI


On Sun, Mar 29, 2020 at 06:54 AM, <brus-per.hogstedt@...> wrote:
This is beyond embarrassing but I simply cannot get the N1MM+ Spectrum/waterfall working via a soundcard. Here is my setup:

I am feeding the I/Q-signal from the Xiegu G90 to a 24bit stereo soundcard @ 196kHz. The output from the soundcard is fed via USB to the laptop running N1MM+ latest release.

This setup works without problems in HDSDR as well as SDR# so I assume the setup must be right.

I was expecting to see the soundcard show up in the Spectrum/Waterfall / Config / Spectrum Source / For all other rados, source named / dropdown but there are no alternatives there. I have tried writing the source manually ("Microphone", "Xonar U7 MKII" and other combinations) but no success:


Have read this group, searched other sources and watched countless Youtube videos with the same result: No Spectrum, no waterfall. I must have missed something obvious here but right now I have run out of ideas.

So, in short: I need help :)

Tia and 73's

N1MM+ Spectrum/Waterfall via soundcard #spectrum

brus-per.hogstedt@...
 

This is beyond embarrassing but I simply cannot get the N1MM+ Spectrum/waterfall working via a soundcard. Here is my setup:

I am feeding the I/Q-signal from the Xiegu G90 to a 24bit stereo soundcard @ 196kHz. The output from the soundcard is fed via USB to the laptop running N1MM+ latest release.

This setup works without problems in HDSDR as well as SDR# so I assume the setup must be right.

I was expecting to see the soundcard show up in the Spectrum/Waterfall / Config / Spectrum Source / For all other rados, source named / dropdown but there are no alternatives there. I have tried writing the source manually ("Microphone", "Xonar U7 MKII" and other combinations) but no success:


Have read this group, searched other sources and watched countless Youtube videos with the same result: No Spectrum, no waterfall. I must have missed something obvious here but right now I have run out of ideas.

So, in short: I need help :)

Tia and 73's

Re: Help please ts590 voice keyer.

John Bednar
 

John,

 

See the Logger+ manual, Supported Radios, TS-590 text.

In Logger+ Audio the Internal Radio Codec needs to be checked and the radio codec MIC and Speaker devices.

In the radio baud rate window select SSB PTT via radio command, and set the radio for 57600 baud via the USB cable. The document contained in the text will help with the radio configuration for 57600 baud USB cable use. Don’t select the legacy audio player.

 

We are looking for someone to update the TS-590 USB setup document for USB radio control, voice recording, playback, and digital modes. Contact me directly if you are willing to help. The document has snapshots from the legacy program and instructions to use the legacy audio player.

 

John, K3CT

 

 

From: N1MMLoggerPlus@groups.io [mailto:N1MMLoggerPlus@groups.io] On Behalf Of marysherry via Groups.Io
Sent: Sunday, March 29, 2020 3:47 AM
To: N1MMLoggerPlus@groups.io
Subject: [N1MM+] Help please ts590 voice keyer.

 

Hi folks, I am trying to send ssb messages in wpx ssb using N1MM & my Kenwood ts590.

Windows 10
Have usb cable connected. 
I have a usb pc mike.
Frequency on my rig to n1mm is ok.

I am not sure how to record or set up the wav files.

I am sure it is relatively simple however I could use some help.

John GM0AZC 

Re: crash #n1mm

M0NPT QSL <m0npt@...>
 

I couldn't open my log at all since I have updated it yesterday.  -:(

Sent from Outlook Mobile


From: N1MMLoggerPlus@groups.io <N1MMLoggerPlus@groups.io> on behalf of on3lx.jpierre@... <on3lx.jpierre@...>
Sent: Sunday, March 29, 2020 9:58:30 AM
To: N1MMLoggerPlus@groups.io <N1MMLoggerPlus@groups.io>
Subject: [N1MM+] crash #n1mm
 
I closed last night at 22:00 and in the morning turn on the pc and the full crash logger impossible to start n1mm logger, in full WPX contest, I lost my log
--
73 de ON3LX Jean-Pierre