Date   
Re: Audio Recording

Drew Vonada-Smith K3PA
 

I also use a Sony recorder.  Cheap and trouble free.

73,

Drew K3PA

Re: Audio Recording

Monte Stark
 

Thanks Rich and Mike,

 

I have used Audacity for recording our little bluegrass band in the past, so I tried it for this. Works great for the DX station but I can't find any way to get it to record my send audio.

 

Not going to mess with it any more now but will pick up one of the small digital recorders and parallel it with the phones for the next one. What the heck, a guy always needs more toys, right?

 

Thanks for the quick responses.

 

OK, back in my hole,

 

Ron, KU7Y

Mountain Home, ID  DN23dc

CW Ops #1211

QRP ARCI #8829

SOC #2

Idaho DX Association

Ron@...

 

From: N1MMLoggerPlus@groups.io [mailto:N1MMLoggerPlus@groups.io] On Behalf Of ve3ki
Sent: Friday, November 22, 2019 12:48 PM
To: N1MMLoggerPlus@groups.io
Subject: Re: [N1MM+] Audio Recording

 

To a considerable extent the answer depends on your radio. In the case of the FTdx3000, I believe that radio has an internal USB audio codec. Assuming that it does, and that the radio's USB port is connected to the computer, then you should be able to use the codec as the sound card in sound recording software. You might want to experiment first to see whether or not it also records the monitor output (your CW sidetone). There may be settings in the radio's menu to control whether the monitor output is heard in the sound card or not, and perhaps also to control the volume of the monitor relative to the receiver's audio.

For purposes of compliance with the CQ WW contest rules, they want a continuous recording, not a QSO-by-QSO recording. Probably the easiest way to do this is to use off-the-shelf sound recording software. There is a voice recording program in Windows, but I believe it does not give you a choice of sound cards, i.e. it only records from the default input device. You want to be able to record from the codec in the radio, and for that you want software with the capability to choose the sound card. Audacity (<https://www.audacityteam.org/>) certainly does that (and far more). K3IT's QSOrder program can also be configured to make continuous recordings (actually separate files hour by hour). There are many other choices available.

This is certainly not the only way. If you have ever used digital modes with your radio, you probably already have the hardware connections you need to record received audio, it's just a question of using recording software in place of the digital mode software. Another option might be to put a Y-connector in the path between your headphones and the radio, and feed an external sound card or sound recording device from it. That should work with any radio.

Whatever you are using, you need to take a bit of time ahead of the contest to adjust volume levels, perhaps adjust the sampling rate and bit depth, and so on. You don't need high fidelity, and if you can set the software to use a lower sampling rate, you can make the recorded files smaller - at high fidelity settings, a recording of a full contest will be a very large file.

73,
Rich VE3KI


On Fri, Nov 22, 2019 at 01:14 PM, Monte Stark wrote:

Win10 Home
N1mm+
FTdx3000
WinkeyerUSB

What do I need to do to record my audio during the contest?

While I will not post a large score I thought I might as well learn how to
do this for future test when I might have some better antennas!

Thanks,

OK, back in my hole,

Ron, KU7Y
Mountain Home, ID DN23dc
CW Ops #1211
QRP ARCI #8829
SOC #2
Idaho DX Association
Ron@...

 

Virus-free. www.avg.com

 

Re: Audio Recording

VE9AA - Mike
 

GA Ron,

Easiest way (by far, even if you are SO2R) is to simply split your headphone audio and go out to an external digital recorder.
It just can't get simpler than that.  I use a small audio amp/mixer in line as well, but you can get "useable" audio even w/o it.
Sony makes a couple nice ones @ $50-$70 at Best Buy or your favorite electronics store.

You can also download an app called QSOorder, but it can be complicated and there is lots to do (in some cases) to get it working right
and you have 4hrs+10mins before the contest starts, so....

HTH

Mike VE9AA

Re: Audio Recording

ve3ki
 

To a considerable extent the answer depends on your radio. In the case of the FTdx3000, I believe that radio has an internal USB audio codec. Assuming that it does, and that the radio's USB port is connected to the computer, then you should be able to use the codec as the sound card in sound recording software. You might want to experiment first to see whether or not it also records the monitor output (your CW sidetone). There may be settings in the radio's menu to control whether the monitor output is heard in the sound card or not, and perhaps also to control the volume of the monitor relative to the receiver's audio.

For purposes of compliance with the CQ WW contest rules, they want a continuous recording, not a QSO-by-QSO recording. Probably the easiest way to do this is to use off-the-shelf sound recording software. There is a voice recording program in Windows, but I believe it does not give you a choice of sound cards, i.e. it only records from the default input device. You want to be able to record from the codec in the radio, and for that you want software with the capability to choose the sound card. Audacity (<https://www.audacityteam.org/>) certainly does that (and far more). K3IT's QSOrder program can also be configured to make continuous recordings (actually separate files hour by hour). There are many other choices available.

This is certainly not the only way. If you have ever used digital modes with your radio, you probably already have the hardware connections you need to record received audio, it's just a question of using recording software in place of the digital mode software. Another option might be to put a Y-connector in the path between your headphones and the radio, and feed an external sound card or sound recording device from it. That should work with any radio.

Whatever you are using, you need to take a bit of time ahead of the contest to adjust volume levels, perhaps adjust the sampling rate and bit depth, and so on. You don't need high fidelity, and if you can set the software to use a lower sampling rate, you can make the recorded files smaller - at high fidelity settings, a recording of a full contest will be a very large file.

73,
Rich VE3KI


On Fri, Nov 22, 2019 at 01:14 PM, Monte Stark wrote:
Win10 Home
N1mm+
FTdx3000
WinkeyerUSB

What do I need to do to record my audio during the contest?

While I will not post a large score I thought I might as well learn how to
do this for future test when I might have some better antennas!

Thanks,

OK, back in my hole,

Ron, KU7Y
Mountain Home, ID DN23dc
CW Ops #1211
QRP ARCI #8829
SOC #2
Idaho DX Association
Ron@...

Audio Recording

Monte Stark
 

Win10 Home
N1mm+
FTdx3000
WinkeyerUSB

What do I need to do to record my audio during the contest?

While I will not post a large score I thought I might as well learn how to
do this for future test when I might have some better antennas!

Thanks,

OK, back in my hole,

Ron, KU7Y
Mountain Home, ID DN23dc
CW Ops #1211
QRP ARCI #8829
SOC #2
Idaho DX Association
Ron@...

Re: N1MM (almost) mutes Winkey USB sidetone

Dave Hachadorian
 

For SO2R, I turn off the sidetone on both rigs.  Winkey is set for paddle-only sidetone.  I brought speaker audio out of the Winkey and connected it to one of those old Radio Shack mobile comm speakers, and it is LOUD!  I can easily hear my paddle sending even with headphones on.  The only drawback is that other people in the house have to listen to a loud blast of CW every now and then.
 
Dave Hachadorian, K6LL
Yuma, AZ
 

From: Bob Epstein K8IA via Groups.Io
Sent: Friday, November 22, 2019 7:20 AM
To: N1MMLoggerPlus@groups.io
Subject: Re: [N1MM+] N1MM (almost) mutes Winkey USB sidetone
 
Pete,
 
Like VE9AA. I have always used the radio sidetone for contesting and the Winkey has always muted when N1MM pgm connects.
 
 
 
73, Bob K8IA
Arizona Outlaws Contest Club
 
-------- Original message --------
From: VE9AA - Mike <ve9aa@...>
Date: 11/22/19 7:04 AM (GMT-07:00)
To: N1MMLoggerPlus@groups.io
Subject: Re: [N1MM+] N1MM (almost) mutes Winkey USB sidetone
 
I believe most everyone uses the rigs' sidetone, when interfaced with N1MM+
(how would you hear it with your headphones on anyways?)

That's how I do it.

GL Pete.

Re: N1MM (almost) mutes Winkey USB sidetone

Pete Smith
 

Interesting, Bob.  Not my experience, though, as you say, 99 percent of the time I'm using headphones and my radio's sidetone.  The Winkeyer is not totally muted, just turned down too far to hear easily.

73, Pete N4ZR
Check out the Reverse Beacon Network 
at <http://reversebeacon.net>, now 
spotting RTTY activity worldwide. 
For spots, please use your favorite 
"retail" DX cluster.
On 11/22/2019 9:20 AM, Bob Epstein K8IA via Groups.Io wrote:

Pete,

Like VE9AA. I have always used the radio sidetone for contesting and the Winkey has always muted when N1MM pgm connects. 



73, Bob K8IA
Arizona Outlaws Contest Club

-------- Original message --------
From: VE9AA - Mike <ve9aa@...>
Date: 11/22/19 7:04 AM (GMT-07:00)
Subject: Re: [N1MM+] N1MM (almost) mutes Winkey USB sidetone

I believe most everyone uses the rigs' sidetone, when interfaced with N1MM+
(how would you hear it with your headphones on anyways?)

That's how I do it.

GL Pete.

Re: N1MM+ with Omnirig Virtual Comm Port software?

Alexander Kopp MD
 

I’m using win4yaesu with comocom for virtual com ports and omnirig and it works. 
Happy to give you more information when I get home from work tonight.
73, Alex 


On Nov 22, 2019, at 07:33, Larry K8UT <K8UT@...> wrote:


David,

The current version of OmniRig is 18 months old. The developer has declared the program is frozen: "We stopped the further development due to the complex integration into the current HAM-applications."

-larry K8UT

------ Original Message ------
From: "David Wilkins via Groups.Io" <davidinlondon@...>
Sent: 2019-11-21 10:50:07
Subject: [N1MM+] N1MM+ with Omnirig Virtual Comm Port software?

Hello - I already use Omnirig to interface my Windows 10 PC to my FT-dx-5000MP and an SDRuno RSP-1A SDR.  There are a few logging programs that Omnirig lists as being compatible with its Virtual Comm Posts function, but not N1MM+. 

Any chance that N1MM+ may be updated to work with it?

Regards - David G5HY

Re: N1MM (almost) mutes Winkey USB sidetone

Larry K8UT
 

>Config >Winkey only selects Sidetone ON or OFF.

On my Winkey USB there is no sidetone volume difference between N1MM+ and WKDemo.


------ Original Message ------
From: "Pete Smith" <n4zr@...>
Sent: 2019-11-22 08:44:04
Subject: [N1MM+] N1MM (almost) mutes Winkey USB sidetone

Getting set up for CQWW CW, and have a small problem.  My Winkeyer USB's sidetone is fine when using it standalone or with the WKDemo, but when I start MM+ it is muted almost to inaudible.  That suggests to me that MM+ must be sending a parameter to the keyer, but if so, I don't see anywhere in Config/Winkey to specify the sidetone level.  What am I missing?

73, Pete N4ZR
Check out the Reverse Beacon Network 
at <http://reversebeacon.net>, now 
spotting RTTY activity worldwide. 
For spots, please use your favorite 
"retail" DX cluster.

Re: N1MM (almost) mutes Winkey USB sidetone

Bob Epstein K8IA
 

Pete,

Like VE9AA. I have always used the radio sidetone for contesting and the Winkey has always muted when N1MM pgm connects. 



73, Bob K8IA
Arizona Outlaws Contest Club

-------- Original message --------
From: VE9AA - Mike <ve9aa@...>
Date: 11/22/19 7:04 AM (GMT-07:00)
To: N1MMLoggerPlus@groups.io
Subject: Re: [N1MM+] N1MM (almost) mutes Winkey USB sidetone

I believe most everyone uses the rigs' sidetone, when interfaced with N1MM+
(how would you hear it with your headphones on anyways?)

That's how I do it.

GL Pete.

Re: Airspy & Spectrum Scope

Pete Smith
 

If you follow the instructions in the N1MM+ manual closely you should have no trouble.  I do note one fatal error in some of the messages on this topic - the IP address for "this computer" is 127.0.0.1:5555 (port 5555), which must be entered in the spectrum display's Connect dialog.  When you click the "C" (for Connect) it opens a separate DOS program called spyserver.exe which serves as an intermediary between the receiver and the spectrum display

73, Pete N4ZR
Check out the Reverse Beacon Network 
at <http://reversebeacon.net>, now 
spotting RTTY activity worldwide. 
For spots, please use your favorite 
"retail" DX cluster.
On 11/21/2019 9:27 PM, William Liporace WC2L wrote:

I have followed those directions..
Device was sleeping. Wake up
Could not acquire device....
I have left it 0.0.0,0, 172.0.0.1 and the IP address of the PC

Will WC2L

On 11/21/2019 9:03 PM, Tom Wagner (N1MM) wrote:
https://n1mmwp.hamdocs.com/manual-windows/spectrum-display-window/#airspy-hf

On 11/21/2019 7:12 PM, John H. Long Jr. wrote:
lost track of what I did already.
Getting old is great !!!
So, I believe I followed this video on how to setup SpyServer and then setup N1MM to use it.
https://www.bing.com/videos/search?q=spyserver+setup&&view=detail&mid=4C0701DA8C752BC6E70B4C0701DA8C752BC6E70B&&FORM=VRDGAR
I did use localhost:5555 for the IP address in both Spyserver and N1MM.
After setting up spyserver (as the video suggests) and running it, I right clicked in the N1MM spectrum window and selected "Spectrum Source ---> Airspy HF+"
I hope this helps some.
John H. Long Jr.
KW7A
1370 N 150 E
Nephi, UT 84648
USA
(435) 888-LONG

    --------- Original Message ---------
    Subject: Re: [N1MM+] Airspy & Spectrum Scope
    From: 'William Liporace WC2L' <wc2l@...>
    Date: 11/21/19 3:55 pm
    To: N1MMLoggerPlus@groups.io

    Please do share!! Inquiring minds would like to know!!
    Or at least my feeble mind~~

    Will WC2L

    On 11/21/2019 4:27 AM, John H. Long Jr. wrote:

        Solved.
        I found some detailed instructions online.
        John H. Long Jr.
        KW7A
        1370 N 150 E
        Nephi, UT 84648
        USA
        (435) 888-LONG

            --------- Original Message ---------
            Subject: Re: [N1MM+] Airspy & Spectrum Scope
            From: 'John H. Long Jr.' <john@...>
            Date: 11/20/19 8:59 pm
            To: N1MMLoggerPlus@groups.io

            I am also having problems with getting Airspy HF+
            Discovery working in the N1MM spectrum display.
            This is my first attempt at trying to run it.
            Do I need to change anything as a way of setting up
            spyserver and N1MM?
            I noticed Airsoy server screen says it is listening on
            0.0.0.0:5555
              N1mm seems to be looking for 127.0.0.0:5555
            Is that an issue?
            John H. Long Jr.
            KW7A
            1370 N 150 E
            Nephi, UT 84648
            USA
            (435) 888-LONG

                --------- Original Message ---------
                Subject: [N1MM+] Airspy & Spectrum Scope
                From: 'William Liporace WC2L' <wc2l@...>
                Date: 11/20/19 7:03 pm
                To: N1MMLoggerPlus@groups.io

                I'm hoping someone can help me!!
                I have the latest version of N1MM & SDRPlay!

                When I start N1MM+, Spyserver does not auto start.
                Manually start Spyserver
                Start N1MM+
                Window - Spectrum Display
                Right Click Spectrum Display - Airspy HF+
                Then I get the following error:

                N1MMLogger.net - Version 1.0.8014.0
                Built: 11/13/2019 8:53:10 AM
                Microsoft Windows NT 10.0.18363.0,64:1,en-US,en-US
                Error occurred at: 11/20/2019 8:48:31 PM in Thread:
                Spectrum UI Thread - a12dd15d-87ac-49f8-9cc7-0c774e031876
---------------------------------------------------------------------------------------
                System.ApplicationException: Device got disconnected
                   at
N1MMLogger.Net.SDRSharp.FrontEnds.SpyServer.SpyClient.Connect(String
                host, Int32 port) in C:\N1MM+Source\N1MM Logger on
                .NET\N1MM Logger.Net\Classes\AirspyInterface.vb:line 166
                   at N1MMLogger.Net.SpectrumWindow.SpyConnect() in
                C:\N1MM+Source\N1MM Logger on .NET\N1MM
                Logger.Net\Forms\SpectrumWindow.vb:line 4161
                   at N1MMLogger.Net.SpectrumWindow.ConnectSpy() in
                C:\N1MM+Source\N1MM Logger on .NET\N1MM
                Logger.Net\Forms\SpectrumWindow.vb:line 4138
                   at
N1MMLogger.Net.SpectrumWindow.SetUpSpectrumProcessingClass()
                in C:\N1MM+Source\N1MM Logger on .NET\N1MM
                Logger.Net\Forms\SpectrumWindow.vb:line 1309
---------------------------------------------------------------------------------------

                Call Stack before the runtime error:   at
                System.Environment.GetStackTrace(Exception e, Boolean
                needFileInfo)
                   at System.Environment.get_StackTrace()
                   at N1MMLibrary.SharedLib.CallStackString() in
                C:\N1MM+Source\N1MM Logger on .NET\N1MM
                Library\Classes\SharedCode.vb:line 89
                   at N1MMLogger.Net.SharedCode.HandleError(Exception
                e, String PortName, String Info) in
                C:\N1MM+Source\N1MM Logger on .NET\N1MM
                Logger.Net\Modules\SharedCode.vb:line 186
                   at
N1MMLogger.Net.SpectrumWindow.SetUpSpectrumProcessingClass()
                in C:\N1MM+Source\N1MM Logger on .NET\N1MM
                Logger.Net\Forms\SpectrumWindow.vb:line 1355
                   at
N1MMLogger.Net.SpectrumWindow.AirspySourceMenuItem_Click(Object
                sender, EventArgs e) in C:\N1MM+Source\N1MM Logger on
                .NET\N1MM Logger.Net\Forms\SpectrumWindow.vb:line 2241
                   at
System.Windows.Forms.ToolStripItem.RaiseEvent(Object
                key, EventArgs e)
                   at
System.Windows.Forms.ToolStripMenuItem.OnClick(EventArgs
                e)
                   at
System.Windows.Forms.ToolStripItem.HandleClick(EventArgs
                e)
                   at
System.Windows.Forms.ToolStripItem.HandleMouseUp(MouseEventArgs
                e)
                   at
System.Windows.Forms.ToolStripItem.FireEventInteractive(EventArgs
                e, ToolStripItemEventType met)
                   at
System.Windows.Forms.ToolStripItem.FireEvent(EventArgs
                e, ToolStripItemEventType met)
                   at
System.Windows.Forms.ToolStrip.OnMouseUp(MouseEventArgs
                mea)
                   at
System.Windows.Forms.ToolStripDropDown.OnMouseUp(MouseEventArgs
                mea)
                   at System.Windows.Forms.Control.WmMouseUp(Message&
                m, MouseButtons button, Int32 clicks)
                   at System.Windows.Forms.Control.WndProc(Message& m)
                   at
System.Windows.Forms.ScrollableControl.WndProc(Message& m)
                   at System.Windows.Forms.ToolStrip.WndProc(Message& m)
                   at
System.Windows.Forms.ToolStripDropDown.WndProc(Message& m)
                   at
System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message&
                m)
                   at
System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message&
                m)
                   at
System.Windows.Forms.NativeWindow.Callback(IntPtr
                hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
                   at
System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG&
                msg)
                   at
System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(IntPtr
                dwComponentID, Int32 reason, Int32 pvLoopData)
                   at
System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32
                reason, ApplicationContext context)
                   at
System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32
                reason, ApplicationContext context)
                   at System.Windows.Forms.Application.Run(Form mainForm)
                   at
N1MMLogger.Net.N1MMLoggerCommon.StartSpectrumWindow(Object
                aGuid) in C:\N1MM+Source\N1MM Logger on .NET\N1MM
                Logger.Net\Modules\N1MMLoggerCommon.vb:line 11600
                   at
System.Threading.ThreadHelper.ThreadStart_Context(Object
                state)
                   at
System.Threading.ExecutionContext.RunInternal(ExecutionContext
                executionContext, ContextCallback callback, Object
                state, Boolean preserveSyncCtx)
                   at
System.Threading.ExecutionContext.Run(ExecutionContext
                executionContext, ContextCallback callback, Object
                state, Boolean preserveSyncCtx)
                   at
System.Threading.ExecutionContext.Run(ExecutionContext
                executionContext, ContextCallback callback, Object state)
                   at System.Threading.ThreadHelper.ThreadStart(Object
                obj)

                The Spyserver says Device is sleeping, Wake up!
                Could not acquire the device

                If I try to connect anyway, I get the following:

                See the end of this message for details on invoking
                just-in-time (JIT) debugging instead of this dialog box.
                ************** Exception Text **************
                System.ApplicationException: Device got disconnected
                   at
N1MMLogger.Net.SDRSharp.FrontEnds.SpyServer.SpyClient.Connect(String
                host, Int32 port) in C:\N1MM+Source\N1MM Logger on
                .NET\N1MM Logger.Net\Classes\AirspyInterface.vb:line 166
                   at N1MMLogger.Net.SpectrumWindow.SpyConnect() in
                C:\N1MM+Source\N1MM Logger on .NET\N1MM
                Logger.Net\Forms\SpectrumWindow.vb:line 4161
                   at N1MMLogger.Net.SpectrumWindow.ConnectSpy() in
                C:\N1MM+Source\N1MM Logger on .NET\N1MM
                Logger.Net\Forms\SpectrumWindow.vb:line 4138
                   at
N1MMLogger.Net.SpectrumWindow.AirspyConnect_Click(Object
                sender, EventArgs e) in C:\N1MM+Source\N1MM Logger on
                .NET\N1MM Logger.Net\Forms\SpectrumWindow.vb:line 4346
                   at System.Windows.Forms.Control.OnClick(EventArgs e)
                   at System.Windows.Forms.Button.OnClick(EventArgs e)
                   at System.Windows.Forms.Button.WndProc(Message& m)
                   at
System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message&
                m)
                   at
System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message&
                m)
                   at
System.Windows.Forms.NativeWindow.Callback(IntPtr
                hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)

                ************** Loaded Assemblies **************
                mscorlib
                    Assembly Version: 4.0.0.0
                    Win32 Version: 4.8.4042.0 built by: NET48REL1LAST_C
                    CodeBase:
file:///C:/Windows/Microsoft.NET/Framework/v4.0.30319/mscorlib.dll
                ----------------------------------------
                N1MMLogger.net
                    Assembly Version: 1.0.8014.0
                    Win32 Version: 1.0.8014
                    CodeBase:
file:///C:/Program%20Files%20(x86)/N1MM%20Logger+/N1MMLogger.net.exe
                ----------------------------------------
                Microsoft.VisualBasic
                    Assembly Version: 10.0.0.0
                    Win32 Version: 14.8.3752.0 built by: NET48REL1
                    CodeBase:
file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/Microsoft.VisualBasic/v4.0_10.0.0.0__b03f5f7f11d50a3a/Microsoft.VisualBasic.dll
                ----------------------------------------
                System
                    Assembly Version: 4.0.0.0
                    Win32 Version: 4.8.4001.0 built by: NET48REL1LAST_C
                    CodeBase:
file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dll
                ----------------------------------------
                System.Core
                    Assembly Version: 4.0.0.0
                    Win32 Version: 4.8.4042.0 built by: NET48REL1LAST_C
                    CodeBase:
file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Core/v4.0_4.0.0.0__b77a5c561934e089/System.Core.dll
                ----------------------------------------
                System.Windows.Forms
                    Assembly Version: 4.0.0.0
                    Win32 Version: 4.8.4042.0 built by: NET48REL1LAST_C
                    CodeBase:
file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms/v4.0_4.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
                ----------------------------------------
                System.Drawing
                    Assembly Version: 4.0.0.0
                    Win32 Version: 4.8.3752.0 built by: NET48REL1
                    CodeBase:
file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Drawing/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
                ----------------------------------------
                N1MMLibrary
                    Assembly Version: 1.0.8014.0
                    Win32 Version: 1.0.8014
                    CodeBase:
file:///C:/Program%20Files%20(x86)/N1MM%20Logger+/N1MMLibrary.DLL
                ----------------------------------------
                IQ
                    Assembly Version: 1.0.0.0
                    Win32 Version: 1.0.0.0
                    CodeBase:
file:///C:/Program%20Files%20(x86)/N1MM%20Logger+/IQ.DLL
                ----------------------------------------
                System.Windows.Forms.DataVisualization
                    Assembly Version: 4.0.0.0
                    Win32 Version: 4.8.3815.0
                    CodeBase:
file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms.DataVisualization/v4.0_4.0.0.0__31bf3856ad364e35/System.Windows.Forms.DataVisualization.dll
                ----------------------------------------
                System.Configuration
                    Assembly Version: 4.0.0.0
                    Win32 Version: 4.8.3752.0 built by: NET48REL1
                    CodeBase:
file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Configuration/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
                ----------------------------------------
                System.Xml
                    Assembly Version: 4.0.0.0
                    Win32 Version: 4.8.3752.0 built by: NET48REL1
                    CodeBase:
file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
                ----------------------------------------
                System.Web
                    Assembly Version: 4.0.0.0
                    Win32 Version: 4.8.4042.0 built by: NET48REL1LAST_C
                    CodeBase:
file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_32/System.Web/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Web.dll
                ----------------------------------------
                System.Runtime.Remoting
                    Assembly Version: 4.0.0.0
                    Win32 Version: 4.8.3752.0 built by: NET48REL1
                    CodeBase:
file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Runtime.Remoting/v4.0_4.0.0.0__b77a5c561934e089/System.Runtime.Remoting.dll
                ----------------------------------------
                System.Data.SQLite
                    Assembly Version: 1.0.92.0
                    Win32 Version: 1.0.92.0
                    CodeBase:
file:///C:/Program%20Files%20(x86)/N1MM%20Logger+/System.Data.SQLite.DLL
                ----------------------------------------
                System.Data
                    Assembly Version: 4.0.0.0
                    Win32 Version: 4.8.3752.0 built by: NET48REL1
                    CodeBase:
file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_32/System.Data/v4.0_4.0.0.0__b77a5c561934e089/System.Data.dll
                ----------------------------------------
                AxInterop.N1MMV12WaveLib
                    Assembly Version: 4.0.0.0
                    Win32 Version: 4.0.0.0
                    CodeBase:
file:///C:/Program%20Files%20(x86)/N1MM%20Logger+/AxInterop.N1MMV12WaveLib.DLL
                ----------------------------------------
                N1MMV12WaveLib
                    Assembly Version: 4.0.0.0
                    Win32 Version: 4.0.0.0
                    CodeBase:
file:///C:/Program%20Files%20(x86)/N1MM%20Logger+/N1MMV12WaveLib.DLL
                ----------------------------------------
                Accessibility
                    Assembly Version: 4.0.0.0
                    Win32 Version: 4.8.3752.0 built by: NET48REL1
                    CodeBase:
file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/Accessibility/v4.0_4.0.0.0__b03f5f7f11d50a3a/Accessibility.dll
                ----------------------------------------
                System.Transactions
                    Assembly Version: 4.0.0.0
                    Win32 Version: 4.8.3752.0 built by: NET48REL1
                    CodeBase:
file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_32/System.Transactions/v4.0_4.0.0.0__b77a5c561934e089/System.Transactions.dll
                ----------------------------------------
                ObjectListView
                    Assembly Version: 2.7.0.42249
                    Win32 Version: 2.7.0.0
                    CodeBase:
file:///C:/Program%20Files%20(x86)/N1MM%20Logger+/ObjectListView.DLL
                ----------------------------------------
                System.EnterpriseServices
                    Assembly Version: 4.0.0.0
                    Win32 Version: 4.8.3752.0 built by: NET48REL1
                    CodeBase:
file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_32/System.EnterpriseServices/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.EnterpriseServices.dll
                ----------------------------------------
                System.Runtime.Caching
                    Assembly Version: 4.0.0.0
                    Win32 Version: 4.8.3752.0
                    CodeBase:
file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Runtime.Caching/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Runtime.Caching.dll
                ----------------------------------------
                RawInput
                    Assembly Version: 1.0.0.0
                    Win32 Version: 1.0.0.0
                    CodeBase:
file:///C:/Program%20Files%20(x86)/N1MM%20Logger+/RawInput.DLL
                ----------------------------------------
                Microsoft.VisualBasic.PowerPacks.Vs
                    Assembly Version: 10.0.0.0
                    Win32 Version: 11.0.50727.1
                    CodeBase:
file:///C:/Program%20Files%20(x86)/N1MM%20Logger+/Microsoft.VisualBasic.PowerPacks.Vs.DLL
                ----------------------------------------
                NAudio
                    Assembly Version: 1.8.5.0
                    Win32 Version: 1.8.5.0
                    CodeBase:
file:///C:/Program%20Files%20(x86)/N1MM%20Logger+/NAudio.DLL
                ----------------------------------------
                System.Numerics
                    Assembly Version: 4.0.0.0
                    Win32 Version: 4.8.3752.0 built by: NET48REL1
                    CodeBase:
file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Numerics/v4.0_4.0.0.0__b77a5c561934e089/System.Numerics.dll
                ----------------------------------------
                ************** JIT Debugging **************
                To enable just-in-time (JIT) debugging, the .config
                file for this
                application or computer (machine.config) must have the
                jitDebugging value set in the system.windows.forms
                section.
                The application must also be compiled with debugging
                enabled.
                For example:
                <configuration>
                    <system.windows.forms jitDebugging="true" />
                </configuration>
                When JIT debugging is enabled, any unhandled exception
                will be sent to the JIT debugger registered on the
                computer
                rather than be handled by this dialog box.


                What is going on?? Can someone help??
                TNX Will WC2L

                --                 William Liporace WC2L
                http://www.wc2l.com  orhttp://dxc.wc2l.com
                AR-Cluster Node  telnet dxc.wc2l.com or 144.93 MHz
                wc2l@...

    --     William Liporace WC2L
    http://www.wc2l.com  orhttp://dxc.wc2l.com
    AR-Cluster Node  telnet dxc.wc2l.com or 144.93 MHz
    wc2l@...






Re: N1MM (almost) mutes Winkey USB sidetone

VE9AA - Mike
 

I believe most everyone uses the rigs' sidetone, when interfaced with N1MM+
(how would you hear it with your headphones on anyways?)

That's how I do it.

GL Pete.

N1MM (almost) mutes Winkey USB sidetone

Pete Smith
 

Getting set up for CQWW CW, and have a small problem.  My Winkeyer USB's sidetone is fine when using it standalone or with the WKDemo, but when I start MM+ it is muted almost to inaudible.  That suggests to me that MM+ must be sending a parameter to the keyer, but if so, I don't see anywhere in Config/Winkey to specify the sidetone level.  What am I missing?

73, Pete N4ZR
Check out the Reverse Beacon Network 
at <http://reversebeacon.net>, now 
spotting RTTY activity worldwide. 
For spots, please use your favorite 
"retail" DX cluster.

Re: N1MM+ with Omnirig Virtual Comm Port software?

Larry K8UT
 

David,

The current version of OmniRig is 18 months old. The developer has declared the program is frozen: "We stopped the further development due to the complex integration into the current HAM-applications."

-larry K8UT

------ Original Message ------
From: "David Wilkins via Groups.Io" <davidinlondon@...>
Sent: 2019-11-21 10:50:07
Subject: [N1MM+] N1MM+ with Omnirig Virtual Comm Port software?

Hello - I already use Omnirig to interface my Windows 10 PC to my FT-dx-5000MP and an SDRuno RSP-1A SDR.  There are a few logging programs that Omnirig lists as being compatible with its Virtual Comm Posts function, but not N1MM+. 

Any chance that N1MM+ may be updated to work with it?

Regards - David G5HY

Re: Setting up for CQWWCW unable to control N1MM+ from keyboard

John Bednar
 

Pete,

I saw Mike's response. He is correct, the program is in SSB mode and the function key messages are trying to play voice wav files.

If you enable radio control the program will track mode and the function key messages will switch with the mode change. If you do not, you will manually need to set the program mode. There are settings in Configurer that allow you to force a program mode.

I downloaded the CQWWCW function key file and do not see the comment that you mentioned.
https://n1mmwp.hamdocs.com/mmfiles/cqwwcw-mc/


Every version of Logger+ is newer than the legacy program version V12.02.00.


John, K3CT

-----Original Message-----
From: N1MMLoggerPlus@groups.io [mailto:N1MMLoggerPlus@groups.io] On Behalf Of N4KW Pete
Sent: Friday, November 22, 2019 12:44 AM
To: N1MMLoggerPlus; pvrcnc@...
Subject: [N1MM+] Setting up for CQWWCW unable to control N1MM+ from keyboard

First I downloaded� latest version of N1mm+ V1.0.8014.0

While trying to test rig, I'm unable to get any response from any of the
"F" keys. The bottom of the main n1mm display asys

"File not found c\user\pete\documents\n1mm logger plus\wav\n4kw\T no
score".I have no idea what this is about.

�I also noted that the CQWWCW function key file says Key file requires
n1mm logger V12.02.00 or newer. Thats not close to my version
that I downloaded this evening

I've been unable to fix my problem and feel it is something simple that
I have missed.� Any suggestions would be appreciated.

73, Pete, N4KW

Re: N1MM+ with Omnirig Virtual Comm Port software?

John Bednar
 

David,

 

There are no plans to support OmniRig.

 

John, K3CT

 

From: N1MMLoggerPlus@groups.io [mailto:N1MMLoggerPlus@groups.io] On Behalf Of David Wilkins via Groups.Io
Sent: Thursday, November 21, 2019 10:50 AM
To: N1MMLoggerPlus@groups.io
Subject: [N1MM+] N1MM+ with Omnirig Virtual Comm Port software?

 

Hello - I already use Omnirig to interface my Windows 10 PC to my FT-dx-5000MP and an SDRuno RSP-1A SDR.  There are a few logging programs that Omnirig lists as being compatible with its Virtual Comm Posts function, but not N1MM+. 

Any chance that N1MM+ may be updated to work with it?

Regards - David G5HY

Re: Airspy & Spectrum Scope

John H. Long Jr.
 

Did you have the port address on it also?
Ie.  0.0.0.0:5555





Sent from my Verizon, Samsung Galaxy smartphone

-------- Original message --------
From: William Liporace WC2L <wc2l@...>
Date: 11/21/19 7:27 PM (GMT-07:00)
To: N1MMLoggerPlus@groups.io
Subject: Re: [N1MM+] Airspy & Spectrum Scope

I have followed those directions..
Device was sleeping. Wake up
Could not acquire device....
I have left it 0.0.0,0, 172.0.0.1 and the IP address of the PC

Will WC2L

On 11/21/2019 9:03 PM, Tom Wagner (N1MM) wrote:
> https://n1mmwp.hamdocs.com/manual-windows/spectrum-display-window/#airspy-hf
>
>
> On 11/21/2019 7:12 PM, John H. Long Jr. wrote:
>> lost track of what I did already.
>> Getting old is great !!!
>> So, I believe I followed this video on how to setup SpyServer and
>> then setup N1MM to use it.
>> https://www.bing.com/videos/search?q=spyserver+setup&&view=detail&mid=4C0701DA8C752BC6E70B4C0701DA8C752BC6E70B&&FORM=VRDGAR
>>
>> I did use localhost:5555 for the IP address in both Spyserver and N1MM.
>> After setting up spyserver (as the video suggests) and running it, I
>> right clicked in the N1MM spectrum window and selected "Spectrum
>> Source ---> Airspy HF+"
>> I hope this helps some.
>> John H. Long Jr.
>> KW7A
>> 1370 N 150 E
>> Nephi, UT 84648
>> USA
>> (435) 888-LONG
>>
>>     --------- Original Message ---------
>>     Subject: Re: [N1MM+] Airspy & Spectrum Scope
>>     From: 'William Liporace WC2L' <wc2l@...>
>>     Date: 11/21/19 3:55 pm
>>     To: N1MMLoggerPlus@groups.io
>>
>>     Please do share!! Inquiring minds would like to know!!
>>     Or at least my feeble mind~~
>>
>>     Will WC2L
>>
>>     On 11/21/2019 4:27 AM, John H. Long Jr. wrote:
>>
>>         Solved.
>>         I found some detailed instructions online.
>>         John H. Long Jr.
>>         KW7A
>>         1370 N 150 E
>>         Nephi, UT 84648
>>         USA
>>         (435) 888-LONG
>>
>>             --------- Original Message ---------
>>             Subject: Re: [N1MM+] Airspy & Spectrum Scope
>>             From: 'John H. Long Jr.' <john@...>
>>             Date: 11/20/19 8:59 pm
>>             To: N1MMLoggerPlus@groups.io
>>
>>             I am also having problems with getting Airspy HF+
>>             Discovery working in the N1MM spectrum display.
>>             This is my first attempt at trying to run it.
>>             Do I need to change anything as a way of setting up
>>             spyserver and N1MM?
>>             I noticed Airsoy server screen says it is listening on
>>             0.0.0.0:5555
>>               N1mm seems to be looking for 127.0.0.0:5555
>>             Is that an issue?
>>             John H. Long Jr.
>>             KW7A
>>             1370 N 150 E
>>             Nephi, UT 84648
>>             USA
>>             (435) 888-LONG
>>
>>                 --------- Original Message ---------
>>                 Subject: [N1MM+] Airspy & Spectrum Scope
>>                 From: 'William Liporace WC2L' <wc2l@...>
>>                 Date: 11/20/19 7:03 pm
>>                 To: N1MMLoggerPlus@groups.io
>>
>>                 I'm hoping someone can help me!!
>>                 I have the latest version of N1MM & SDRPlay!
>>
>>                 When I start N1MM+, Spyserver does not auto start.
>>                 Manually start Spyserver
>>                 Start N1MM+
>>                 Window - Spectrum Display
>>                 Right Click Spectrum Display - Airspy HF+
>>                 Then I get the following error:
>>
>>                 N1MMLogger.net - Version 1.0.8014.0
>>                 Built: 11/13/2019 8:53:10 AM
>>                 Microsoft Windows NT 10.0.18363.0,64:1,en-US,en-US
>>                 Error occurred at: 11/20/2019 8:48:31 PM in Thread:
>>                 Spectrum UI Thread -
>> a12dd15d-87ac-49f8-9cc7-0c774e031876
>> ---------------------------------------------------------------------------------------
>>                 System.ApplicationException: Device got disconnected
>>                    at
>> N1MMLogger.Net.SDRSharp.FrontEnds.SpyServer.SpyClient.Connect(String
>>                 host, Int32 port) in C:\N1MM+Source\N1MM Logger on
>>                 .NET\N1MM Logger.Net\Classes\AirspyInterface.vb:line 166
>>                    at N1MMLogger.Net.SpectrumWindow.SpyConnect() in
>>                 C:\N1MM+Source\N1MM Logger on .NET\N1MM
>>                 Logger.Net\Forms\SpectrumWindow.vb:line 4161
>>                    at N1MMLogger.Net.SpectrumWindow.ConnectSpy() in
>>                 C:\N1MM+Source\N1MM Logger on .NET\N1MM
>>                 Logger.Net\Forms\SpectrumWindow.vb:line 4138
>>                    at
>> N1MMLogger.Net.SpectrumWindow.SetUpSpectrumProcessingClass()
>>                 in C:\N1MM+Source\N1MM Logger on .NET\N1MM
>>                 Logger.Net\Forms\SpectrumWindow.vb:line 1309
>> ---------------------------------------------------------------------------------------
>>
>>                 Call Stack before the runtime error:   at
>>                 System.Environment.GetStackTrace(Exception e, Boolean
>>                 needFileInfo)
>>                    at System.Environment.get_StackTrace()
>>                    at N1MMLibrary.SharedLib.CallStackString() in
>>                 C:\N1MM+Source\N1MM Logger on .NET\N1MM
>>                 Library\Classes\SharedCode.vb:line 89
>>                    at N1MMLogger.Net.SharedCode.HandleError(Exception
>>                 e, String PortName, String Info) in
>>                 C:\N1MM+Source\N1MM Logger on .NET\N1MM
>>                 Logger.Net\Modules\SharedCode.vb:line 186
>>                    at
>> N1MMLogger.Net.SpectrumWindow.SetUpSpectrumProcessingClass()
>>                 in C:\N1MM+Source\N1MM Logger on .NET\N1MM
>>                 Logger.Net\Forms\SpectrumWindow.vb:line 1355
>>                    at
>> N1MMLogger.Net.SpectrumWindow.AirspySourceMenuItem_Click(Object
>>                 sender, EventArgs e) in C:\N1MM+Source\N1MM Logger on
>>                 .NET\N1MM Logger.Net\Forms\SpectrumWindow.vb:line 2241
>>                    at
>> System.Windows.Forms.ToolStripItem.RaiseEvent(Object
>>                 key, EventArgs e)
>>                    at
>> System.Windows.Forms.ToolStripMenuItem.OnClick(EventArgs
>>                 e)
>>                    at
>> System.Windows.Forms.ToolStripItem.HandleClick(EventArgs
>>                 e)
>>                    at
>> System.Windows.Forms.ToolStripItem.HandleMouseUp(MouseEventArgs
>>                 e)
>>                    at
>> System.Windows.Forms.ToolStripItem.FireEventInteractive(EventArgs
>>                 e, ToolStripItemEventType met)
>>                    at
>> System.Windows.Forms.ToolStripItem.FireEvent(EventArgs
>>                 e, ToolStripItemEventType met)
>>                    at
>> System.Windows.Forms.ToolStrip.OnMouseUp(MouseEventArgs
>>                 mea)
>>                    at
>> System.Windows.Forms.ToolStripDropDown.OnMouseUp(MouseEventArgs
>>                 mea)
>>                    at System.Windows.Forms.Control.WmMouseUp(Message&
>>                 m, MouseButtons button, Int32 clicks)
>>                    at System.Windows.Forms.Control.WndProc(Message& m)
>>                    at
>> System.Windows.Forms.ScrollableControl.WndProc(Message& m)
>>                    at System.Windows.Forms.ToolStrip.WndProc(Message& m)
>>                    at
>> System.Windows.Forms.ToolStripDropDown.WndProc(Message& m)
>>                    at
>> System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message&
>>                 m)
>>                    at
>> System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message&
>>                 m)
>>                    at
>> System.Windows.Forms.NativeWindow.Callback(IntPtr
>>                 hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
>>                    at
>> System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG&
>>                 msg)
>>                    at
>> System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(IntPtr
>>                 dwComponentID, Int32 reason, Int32 pvLoopData)
>>                    at
>> System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32
>>                 reason, ApplicationContext context)
>>                    at
>> System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32
>>                 reason, ApplicationContext context)
>>                    at System.Windows.Forms.Application.Run(Form
>> mainForm)
>>                    at
>> N1MMLogger.Net.N1MMLoggerCommon.StartSpectrumWindow(Object
>>                 aGuid) in C:\N1MM+Source\N1MM Logger on .NET\N1MM
>>                 Logger.Net\Modules\N1MMLoggerCommon.vb:line 11600
>>                    at
>> System.Threading.ThreadHelper.ThreadStart_Context(Object
>>                 state)
>>                    at
>> System.Threading.ExecutionContext.RunInternal(ExecutionContext
>>                 executionContext, ContextCallback callback, Object
>>                 state, Boolean preserveSyncCtx)
>>                    at
>> System.Threading.ExecutionContext.Run(ExecutionContext
>>                 executionContext, ContextCallback callback, Object
>>                 state, Boolean preserveSyncCtx)
>>                    at
>> System.Threading.ExecutionContext.Run(ExecutionContext
>>                 executionContext, ContextCallback callback, Object
>> state)
>>                    at System.Threading.ThreadHelper.ThreadStart(Object
>>                 obj)
>>
>>                 The Spyserver says Device is sleeping, Wake up!
>>                 Could not acquire the device
>>
>>                 If I try to connect anyway, I get the following:
>>
>>                 See the end of this message for details on invoking
>>                 just-in-time (JIT) debugging instead of this dialog box.
>>                 ************** Exception Text **************
>>                 System.ApplicationException: Device got disconnected
>>                    at
>> N1MMLogger.Net.SDRSharp.FrontEnds.SpyServer.SpyClient.Connect(String
>>                 host, Int32 port) in C:\N1MM+Source\N1MM Logger on
>>                 .NET\N1MM Logger.Net\Classes\AirspyInterface.vb:line 166
>>                    at N1MMLogger.Net.SpectrumWindow.SpyConnect() in
>>                 C:\N1MM+Source\N1MM Logger on .NET\N1MM
>>                 Logger.Net\Forms\SpectrumWindow.vb:line 4161
>>                    at N1MMLogger.Net.SpectrumWindow.ConnectSpy() in
>>                 C:\N1MM+Source\N1MM Logger on .NET\N1MM
>>                 Logger.Net\Forms\SpectrumWindow.vb:line 4138
>>                    at
>> N1MMLogger.Net.SpectrumWindow.AirspyConnect_Click(Object
>>                 sender, EventArgs e) in C:\N1MM+Source\N1MM Logger on
>>                 .NET\N1MM Logger.Net\Forms\SpectrumWindow.vb:line 4346
>>                    at System.Windows.Forms.Control.OnClick(EventArgs e)
>>                    at System.Windows.Forms.Button.OnClick(EventArgs e)
>>                    at System.Windows.Forms.Button.WndProc(Message& m)
>>                    at
>> System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message&
>>                 m)
>>                    at
>> System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message&
>>                 m)
>>                    at
>> System.Windows.Forms.NativeWindow.Callback(IntPtr
>>                 hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
>>
>>                 ************** Loaded Assemblies **************
>>                 mscorlib
>>                     Assembly Version: 4.0.0.0
>>                     Win32 Version: 4.8.4042.0 built by: NET48REL1LAST_C
>>                     CodeBase:
>> file:///C:/Windows/Microsoft.NET/Framework/v4.0.30319/mscorlib.dll
>>                 ----------------------------------------
>>                 N1MMLogger.net
>>                     Assembly Version: 1.0.8014.0
>>                     Win32 Version: 1.0.8014
>>                     CodeBase:
>> file:///C:/Program%20Files%20(x86)/N1MM%20Logger+/N1MMLogger.net.exe
>>                 ----------------------------------------
>>                 Microsoft.VisualBasic
>>                     Assembly Version: 10.0.0.0
>>                     Win32 Version: 14.8.3752.0 built by: NET48REL1
>>                     CodeBase:
>> file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/Microsoft.VisualBasic/v4.0_10.0.0.0__b03f5f7f11d50a3a/Microsoft.VisualBasic.dll
>>                 ----------------------------------------
>>                 System
>>                     Assembly Version: 4.0.0.0
>>                     Win32 Version: 4.8.4001.0 built by: NET48REL1LAST_C
>>                     CodeBase:
>> file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dll
>>                 ----------------------------------------
>>                 System.Core
>>                     Assembly Version: 4.0.0.0
>>                     Win32 Version: 4.8.4042.0 built by: NET48REL1LAST_C
>>                     CodeBase:
>> file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Core/v4.0_4.0.0.0__b77a5c561934e089/System.Core.dll
>>                 ----------------------------------------
>>                 System.Windows.Forms
>>                     Assembly Version: 4.0.0.0
>>                     Win32 Version: 4.8.4042.0 built by: NET48REL1LAST_C
>>                     CodeBase:
>> file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms/v4.0_4.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
>>                 ----------------------------------------
>>                 System.Drawing
>>                     Assembly Version: 4.0.0.0
>>                     Win32 Version: 4.8.3752.0 built by: NET48REL1
>>                     CodeBase:
>> file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Drawing/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
>>                 ----------------------------------------
>>                 N1MMLibrary
>>                     Assembly Version: 1.0.8014.0
>>                     Win32 Version: 1.0.8014
>>                     CodeBase:
>> file:///C:/Program%20Files%20(x86)/N1MM%20Logger+/N1MMLibrary.DLL
>>                 ----------------------------------------
>>                 IQ
>>                     Assembly Version: 1.0.0.0
>>                     Win32 Version: 1.0.0.0
>>                     CodeBase:
>> file:///C:/Program%20Files%20(x86)/N1MM%20Logger+/IQ.DLL
>>                 ----------------------------------------
>>                 System.Windows.Forms.DataVisualization
>>                     Assembly Version: 4.0.0.0
>>                     Win32 Version: 4.8.3815.0
>>                     CodeBase:
>> file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms.DataVisualization/v4.0_4.0.0.0__31bf3856ad364e35/System.Windows.Forms.DataVisualization.dll
>>                 ----------------------------------------
>>                 System.Configuration
>>                     Assembly Version: 4.0.0.0
>>                     Win32 Version: 4.8.3752.0 built by: NET48REL1
>>                     CodeBase:
>> file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Configuration/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
>>                 ----------------------------------------
>>                 System.Xml
>>                     Assembly Version: 4.0.0.0
>>                     Win32 Version: 4.8.3752.0 built by: NET48REL1
>>                     CodeBase:
>> file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
>>                 ----------------------------------------
>>                 System.Web
>>                     Assembly Version: 4.0.0.0
>>                     Win32 Version: 4.8.4042.0 built by: NET48REL1LAST_C
>>                     CodeBase:
>> file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_32/System.Web/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Web.dll
>>                 ----------------------------------------
>>                 System.Runtime.Remoting
>>                     Assembly Version: 4.0.0.0
>>                     Win32 Version: 4.8.3752.0 built by: NET48REL1
>>                     CodeBase:
>> file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Runtime.Remoting/v4.0_4.0.0.0__b77a5c561934e089/System.Runtime.Remoting.dll
>>                 ----------------------------------------
>>                 System.Data.SQLite
>>                     Assembly Version: 1.0.92.0
>>                     Win32 Version: 1.0.92.0
>>                     CodeBase:
>> file:///C:/Program%20Files%20(x86)/N1MM%20Logger+/System.Data.SQLite.DLL
>>                 ----------------------------------------
>>                 System.Data
>>                     Assembly Version: 4.0.0.0
>>                     Win32 Version: 4.8.3752.0 built by: NET48REL1
>>                     CodeBase:
>> file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_32/System.Data/v4.0_4.0.0.0__b77a5c561934e089/System.Data.dll
>>                 ----------------------------------------
>>                 AxInterop.N1MMV12WaveLib
>>                     Assembly Version: 4.0.0.0
>>                     Win32 Version: 4.0.0.0
>>                     CodeBase:
>> file:///C:/Program%20Files%20(x86)/N1MM%20Logger+/AxInterop.N1MMV12WaveLib.DLL
>>                 ----------------------------------------
>>                 N1MMV12WaveLib
>>                     Assembly Version: 4.0.0.0
>>                     Win32 Version: 4.0.0.0
>>                     CodeBase:
>> file:///C:/Program%20Files%20(x86)/N1MM%20Logger+/N1MMV12WaveLib.DLL
>>                 ----------------------------------------
>>                 Accessibility
>>                     Assembly Version: 4.0.0.0
>>                     Win32 Version: 4.8.3752.0 built by: NET48REL1
>>                     CodeBase:
>> file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/Accessibility/v4.0_4.0.0.0__b03f5f7f11d50a3a/Accessibility.dll
>>                 ----------------------------------------
>>                 System.Transactions
>>                     Assembly Version: 4.0.0.0
>>                     Win32 Version: 4.8.3752.0 built by: NET48REL1
>>                     CodeBase:
>> file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_32/System.Transactions/v4.0_4.0.0.0__b77a5c561934e089/System.Transactions.dll
>>                 ----------------------------------------
>>                 ObjectListView
>>                     Assembly Version: 2.7.0.42249
>>                     Win32 Version: 2.7.0.0
>>                     CodeBase:
>> file:///C:/Program%20Files%20(x86)/N1MM%20Logger+/ObjectListView.DLL
>>                 ----------------------------------------
>>                 System.EnterpriseServices
>>                     Assembly Version: 4.0.0.0
>>                     Win32 Version: 4.8.3752.0 built by: NET48REL1
>>                     CodeBase:
>> file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_32/System.EnterpriseServices/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.EnterpriseServices.dll
>>                 ----------------------------------------
>>                 System.Runtime.Caching
>>                     Assembly Version: 4.0.0.0
>>                     Win32 Version: 4.8.3752.0
>>                     CodeBase:
>> file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Runtime.Caching/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Runtime.Caching.dll
>>                 ----------------------------------------
>>                 RawInput
>>                     Assembly Version: 1.0.0.0
>>                     Win32 Version: 1.0.0.0
>>                     CodeBase:
>> file:///C:/Program%20Files%20(x86)/N1MM%20Logger+/RawInput.DLL
>>                 ----------------------------------------
>>                 Microsoft.VisualBasic.PowerPacks.Vs
>>                     Assembly Version: 10.0.0.0
>>                     Win32 Version: 11.0.50727.1
>>                     CodeBase:
>> file:///C:/Program%20Files%20(x86)/N1MM%20Logger+/Microsoft.VisualBasic.PowerPacks.Vs.DLL
>>                 ----------------------------------------
>>                 NAudio
>>                     Assembly Version: 1.8.5.0
>>                     Win32 Version: 1.8.5.0
>>                     CodeBase:
>> file:///C:/Program%20Files%20(x86)/N1MM%20Logger+/NAudio.DLL
>>                 ----------------------------------------
>>                 System.Numerics
>>                     Assembly Version: 4.0.0.0
>>                     Win32 Version: 4.8.3752.0 built by: NET48REL1
>>                     CodeBase:
>> file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Numerics/v4.0_4.0.0.0__b77a5c561934e089/System.Numerics.dll
>>                 ----------------------------------------
>>                 ************** JIT Debugging **************
>>                 To enable just-in-time (JIT) debugging, the .config
>>                 file for this
>>                 application or computer (machine.config) must have the
>>                 jitDebugging value set in the system.windows.forms
>>                 section.
>>                 The application must also be compiled with debugging
>>                 enabled.
>>                 For example:
>>                 <configuration>
>>                     <system.windows.forms jitDebugging="true" />
>>                 </configuration>
>>                 When JIT debugging is enabled, any unhandled exception
>>                 will be sent to the JIT debugger registered on the
>>                 computer
>>                 rather than be handled by this dialog box.
>>
>>
>>                 What is going on?? Can someone help??
>>                 TNX Will WC2L
>>
>>                 --                 William Liporace WC2L
>>                 http://www.wc2l.com  orhttp://dxc.wc2l.com
>>                 AR-Cluster Node  telnet dxc.wc2l.com or 144.93 MHz
>>                 wc2l@...
>>
>>     --     William Liporace WC2L
>>     http://www.wc2l.com  orhttp://dxc.wc2l.com
>>     AR-Cluster Node  telnet dxc.wc2l.com or 144.93 MHz
>>     wc2l@...
>>
>>
>
>
>
>
--
William Liporace WC2L
http://www.wc2l.com or http://dxc.wc2l.com
AR-Cluster Node  telnet dxc.wc2l.com or 144.93 MHz
wc2l@...





Re: Icom voice memories?

Michael WA7SKG
 

The command must have the address of the radio used. The example provided used address 98 for the IC-7610:
CAT1Hex FE FE 98 E0 28 00 01 FD

The address is the number after FE FE. Some other radios address are:
7300 94
7100 88
7200 76

A list of default CI-V addresses for Icom radios may be found at
http://www.plicht.de/ekki/civ/civ-p31.html
http://www.docksideradio.com/Icom%20Radio%20Hex%20Addresses.htm

Or you can use the default broadcast address of 00 which will command any model that has that particular feature. Using the table provided in the response by VE9AA and others, program the desired macro buttons with the listed commands changing the address as appropriate for your radio.

I actually use the 00 address as I move the laptop between my shack (IC-7300) and my mobile (IC-7100) and I don't have to change macros.

Michael WA7SKG



John Bednar via Groups.Io wrote on 11/21/19 4:38 PM:

B.
Depends on the radio. You didn’t include the model in this email.
For instance, the Supported Radios section of the N1MM Logger+ manual for the IC-7610  includes the CatMacro commands to trigger the internal voice memories.
John, K3CT
*From:*N1MMLoggerPlus@groups.io [mailto:N1MMLoggerPlus@groups.io] *On Behalf Of *B. Smith via Groups.Io
*Sent:* Thursday, November 21, 2019 7:22 PM
*To:* N1MMLoggerPlus@groups.io
*Subject:* Re: [N1MM+] Icom voice memories?
When I tried the suggestions, the program is looking for a DVK file in a N1MM+ directory. It doesn't appear to me that the question has been addressed, although the suggestions may indirectly be of some help. The question is "Is there a way for the software to trigger the internal Icom voice memories?". In other words, trigger voice memories recorded in the radio.

Re: Setting up for CQWWCW unable to control N1MM+ from keyboard

VE9AA - Mike
 

sounds like you're in SSB mode Pete.  Simply type "CW" (w/o the quotes) in the call entry box and hit enter.

CU this weekend !

mike ve9aa

Setting up for CQWWCW unable to control N1MM+ from keyboard

Pete N4KW
 

First I downloaded  latest version of N1mm+ V1.0.8014.0

While trying to test rig, I'm unable to get any response from any of the
"F" keys. The bottom of the main n1mm display asys

"File not found c\user\pete\documents\n1mm logger plus\wav\n4kw\T no
score".I have no idea what this is about.

 I also noted that the CQWWCW function key file says Key file requires
n1mm logger V12.02.00 or newer. Thats not close to my version
that I downloaded this evening

I've been unable to fix my problem and feel it is something simple that
I have missed.  Any suggestions would be appreciated.

73, Pete, N4KW