Sounds like you got it, George. I should have thought of that one first. 73, Pete N4ZRDownload the new N1MM Logger+ at . Check out the Reverse Beacon Network at , now spotting RTTY activity

OK, at this point I better defer to our radio control guru, K3CT. Sorry I can't be more help. 73, Pete N4ZRDownload the new N1MM Logger+ at . Check out the Reverse Beacon Network at ,

What are you trying to achieve? SSB? CW? RTTY? Other digital modes? If CW, you'll in all likelyhood need something in the way of a CW Keyer and/or interface (like a WinkeyerUSB) or something cobbled

With the high level of discourse in this user's group, my question is so simple but characterizes my inexperience with software and digital stuff. I have a direct connect from my laptop to my FT

Steve, When you add or remove a audio device in Windows it can cause the order of the audio devices to change. This can cause a different audio device to be selected in the legacy audio player.

Has anyone developed a UCD to track contacts for the national parks on the air event? Dave ka6bim

Joe You missed step one in Drago’s email You must change CALL in Your Station Data in Config, for each data base you create if you want different information. For W1AW I had a separate

Hello Rich, thanks for responding! Indeed I was using call history lookup! The file I was using was from the Arizona Outlaws group and it was the same file that I had used for last year's RU. Last

Joe, For your circumstances and the NPOTA example you describe: >we want to make a whole new log. If that’s what you want, then you need to >File >New log in databasefor each transmitted

Sorted! Under Configurer --- > Audio --- > TX Sound Card Setup.....the Radio Output Device had changed to USB Audio CODEC, from the usual USB Voice CODEC. How that happened I have no idea, it

Thats what I thought I did, was make a new database for the different call. ======= I'm doing something wrong here. Or can it even be done? � I have N1MM+ and love it and it's

You must change CALL in Your Station Data in Config, But first you must change LogType too,so each stationCALL has separate contest LOG. The best is if you make separate Database for each

Aaah. I thought N1MM would have a way to do what I want. Thank you Tom 73 John GK3UCQ

You're right. I made a typo, I meant TxD. But it is the same issue. DTR on makes the RB trip PTT. DTR on plus RTS (on/off) makes the RB send CW. DTR and xmit data (TxD) makes the RB send FSK to the

Ok, this is what I want to do. Can we do this? Ok I activate one of the locations for the NPOTA activity. Using WB9SBD. After a few hours I let a buddy of mine get on, but he wants

Mike, You said RS-232, but I think you meant to proclaim “FSK is the TxD line,not DTR” – which is the crux of the problem. There are two separate functions (CW and RTTY) exiting the PC on

It's exporting files based on the to the callsign you have entered in the Most contest sponsors want exported logs to be the station callsign (usually the operator). -larry (K8UT)

You can mark rows in the log window in the conventional way and then use copy/adif to copy them to the paste buffer. Next week's build will have a change that makes the marking more obvious. Tom -

I'm doing something wrong here. Or can it even be done? I have N1MM+ and love it and it's set up as WB9SBD, all is well. But I wanted to set it up to also be able to use the club call W9ET, but I

Primarily a cw op, so I am not terribly familiar with this audio stuff, but if you are using Windows 10, there is a possibility that it has somehow gotten the audio device selection mucked up. Go into