Rats. I have mine set to: · Use Winkey Speed Pot for Paddle and Keyboard CW Only I like this because I keep the keyer set at a fixed rate of about 25 wpm for when I need to jump on the

I worked KH6LC on 10 and HI3TT on 20. HI3TT showed up on NA countries mult list on 20 but both showed up as HI on the states mult list. 73, Gerry K8GT

YES ! That is the answer to the known-problem with RF getting into the Winkey speed pot and suddenly causing the speed to jump. 73, Steve, N2IC

In CONFIG > CONFIGURER > WINKEY TAB there is a checkbox to "Ignore Winkey Speed Pot." I have this checked. 73 de Bob - K�RC in MN -- 73 de Bob - K�RC in MN

The FSK=0 looks odd to me. What happens if you change that to FSK=1? 73 de Bob - KØRC in MN -- 73 de Bob - KØRC in MN

Roger that, Tim. Thanks. But in the States/Sections worked window, it indicates that I worked HI (the state) for the three times I worked HI3CC. I'm thinking it shouldn't do that. I only worked HI

RFI? 73, Rich VE3KI ---In N1MMLoggerplus@..., <bob_beyer@...> wrote : I saw the same thing during the Stew Perry 160m contest and the ARRL 10m contest but it did not happen to me yesterday during

I saw the same thing during the Stew Perry 160m contest and the ARRL 10m contest but it did not happen to me yesterday during NAQP. I updated to the latest release just before the start yesterday.

Rick, if you look at your N1MM log window, you will note that there are two columns marked M1 and M2. Hawaii HI the state adds a check in the "M1" mult column (used to count states and provinces). The

During the NAQP CW, N1MM+ logged all of my contacts with HI3CC as Hawaii. The "state" field had HI pre-loaded, so the program does not appear to distinguish between "HI" the state and "HI" the country

Last week, RTTY Roundup. In Entry Window, there is an on-deck call above call box. In S&P I hit ESM return. N1MM+ sends my call. N1MM+ does NOT put the on-deck call in call box. To get call in call

It is the RigExpert EXTFSK.dll renamed to work with MMTTY. What port is set in EXTFSK? Com 9 What [line] is selected for FSK? TxD What [line] is selected for PTT (although N1MM can handle that

Thanks Tom! For some reason I had hit a roadblock trying to read the documentation and thought I was stuck at no larger than 12 point, although the font sizer is mentioned there at the end. Larry

The one screen shot that is missing is that of EXTFSK itself. What port is set in EXTFSK? What [line] is selected for FSK? What [line] is selected for PTT (although N1MM can handle that

Hi Mike, make sure in RE2EXTFSK.ini PTT and FSK ports are correct. I use Rigexpert TI-5 and if port number is not correct in this file RTTY mode in N1MM_ doesn't work Nick, VE3FJ

I can't see the screen shots here, but if COM9 is the port that EXTFSK is configured to use, it should not be mentioned at all in the N1MM+ Configurer. The only program that needs to know about its

I also meant to add. I am not stranger to how software systems work. I have had a career as an integrator in the software world and in my other life, we do so much with RS232 operation that I fully

I'm not sure if the screen shots make it into the Listserver, so I am copying Joe directly as well. What is the path to the MMTTY directory? c:\ham\mmtty (it was in the previous post) What path do

During NAQP CW it happened twice: I would be running 'em I'd enter a call,then when sending the exchange (ESM mode) the speed would jump to WinKeyer max(45 wpm in my case). Odd that this would

This emailmessage is a notification to let you know that two files has been uploaded tothe Files area of the N1MMLoggerPlus group. CallHist_SKCC.txt and CallHist_SKCC_EVENT_WES_SPRINT.txt both