Did the same here with no issues. I was using the version of Logger Plus that downloaded just before beginning NAQP. 73, Jim K9YC

Thanks Steve! 73, Pete, K2PS/4

The ADIF import for NAQP (and other contests that use "name") has been fixed. The fix will be in the next release, or you can use the experimental version in

It does help, Ryan. You gave me the gutsto dump the ADIF into my logging program (DX4WIN) without worrying (too much)that it might corrupt everything. It worked fine. So it sure seems prettyclear

Tom, I've just installed 5433 on Win 10 and the 300 msec focus time-out is giving me problems. The multiple select is working, but I cannot select a single row and right click and do anything because

>After the NAQPCW Test, I exported the file to ADIF, then imported from my contest PC to my regular PC. I notice that the Name field is now blank, while the Section gets filled with the Name. The

Gladit was helpful Pete. Andmany thanks for the work you and the rest of the team does on N1MM+. OK,back in my hole, Ron,KU7Y ArizonaOutlaws Contest Club NorthernCalifornia Contest

Thanks for the comment, Ron. Andactually, I think that helped. Your experience might point to the source ofthe problem as being on the Import side of N1MM+. Pete, K2PS/4

I'musing just one computer running Win 10. InN1MM+ I saved the log as ADIF and imported it into DX Lab's DX Keeper. All theName and State fields imported OK. N1MM+was closed when I did the

Mike, I'm also using TeamViewer. I also use the K3ui utility by Pignology which gives me a virtual screen of the K3 front panel on the shack computer. I will also try Skype for the audio at some point

Had similar problem during NAQP. Exported ADIF from one computer, imported on another. Name populated both the name and state field. Then when Cabrillo file was generated after the contest, name

Steve The ‘radio interface polling connection’ is your USB to KX3 lead? 'band map for this radio' is an available window....right click, and ‘reset radios’ is one of the options. Check in

This is how I run my remote base. I have a PC at the far end and I run remote desktop on it with N1MM+, PSTRotatorAZ, HRD and just about everything else. I do use remoterig to control the TS480 with

Noticed same ADIF import (to DXKeeper) problem here. John K3TN

I have the latest version loaded of N1MM + loaded on my HP 4 core win 7 updated to win 10 that keeps giving the following error message. "Radio # 1, Elecraft KX3 on COM 3 is not

Its OK, question basically was not about myself, but more about others who may experience this behavior. Hopefully they will be curious enough and will read tooltip one way or another. Yes, selected

It doesn't behave that way on Win 10. The issue is that the log control I am using doesn't want to display tool tips at all when the focus is returned to the Entry Window. You will notice that the

Win7 Pro 32b 2GB RAM, Core2Duo T2400 ---In N1MMLoggerplus@..., <Tom@...> wrote : What os?

What os?

I changed my pc date to CQWW CW date and opened CQWW log. Not in scp callsigns are highlighted and there is a tooltip, but it shows only for a second or even a fraction of second. Need to move mouse