Paul. I simply put the next station that I want to work into the “on deck circle”by clicking on it. Please see Larry’s, K8UT, video series on the enhanced log then popfunction. The on deck

http://www.yaesu.com/downloadFile.cfm?FileID=722&FileCatID=158&FileName=FT%2D1000%5FOpManual%40.pdf&FileContentType=application%2Fpdf On page 7 (PDF 9), the manual for the FT-1000 shows Tip and

Steve, Yes, I'm sure the bottom pane is open -- I've been using it for years. And some Qs DO show up. 73, Jim K9YC

I quite often get extra (or garbage) calls in the "logthenpop" stack in the band map and need to delete them or they will soon cause problems... I know that ALT+D will do this, but is there a way to

Works fine, here. Anyone else seeing it not work ? Are you sure the bottom pane, showing previous QSO's, is open ? There are two panes in the Log window, each with its own horizontal slider

Hi I'm looking for Quick Start Guide in russian for N1MM+ or for Classic. Short version or long, Official or draft. If it is available on the web I can't find it. Thanks for help. Vytenis ly5t

John, K3CT Thanks. I bought a stock cable from Radio Shack and that may very well be my problem. Joe, WD6R

Of course. But that's in the shack, and I do email in the house. And, thankfully, it's raining! 73, Jim

The version number is visible in the Help menu, bottom item. 73, Rich VE3KI ---In N1MMLoggerplus@..., <k9yc@...> wrote : My version is whatever I downloaded an hour into NAQP SSB. Win7-64 Pro. 73, Jim

Joe, Make sure the plug is wired correctly. I believe the ft1000 uses ring and ground of the plug and not the tip. The information is in your radio manual. John, K3CT

Is there anyone using the winkeyer with the FT1000D rig? For some reason, I cannot get mine to trigger the rig after inserting a call sign and hitting enter. The program acts as if it is tx-ing but

My version is whatever I downloaded an hour into NAQP SSB. Win7-64 Pro. 73, Jim K9YC

Not seeing that problem. v.5438 Win10 64 bit Right click on the log works perfectly to open and edit the selected QSO. Could be an OS-specific issue? 73 - Dave N3RD

Same issue here. Also, beginning a few versions back, I've not been seeing all previous QSOs in the previous Qs window at the bottom of the log. For example, when I work a guy on 15, I don't see the

Hi all: I am completely new to N1MM Logger. I have an ADT-200A (from www.adat.ch) and would like to make N1MM Logger talk to the radio for CAT control. I see there is a "RhodeSchwarz“ entry in the

I tried to edit some mistakes in the log window during yesterday's NAQP, but I couldn't make the changes, because focus immediately reverted to the Entry Window. Reinstalling V.5433 fixes the

In Run mode, pressing Enter with a call sign entered sends both F5 and F2. What is in F5? 73, Rich VE3KI ---In N1MMLoggerplus@..., <tom.hellem@...> wrote : Running NAQP SSB over the weekend, version

Running NAQP SSB over the weekend, version 1.0.5438. F1-F4 keys programmed to send WAV files from the operator folders. WAV files all played as designed when pressing individual function keys.

Thank you John for your quick reply. Yes I remember very well I askedonce the same question and the reply was "not at moment, may be in afar future". That has been the reason I asked today again. No,

It is generally not possible to get the Log window horizontal scroll bars to disappear, starting in revision v1.0.5433.0 and also in v1.0.5438.0. The last column is always too "wide" no matter how