Which mult are you missing? Zone or country? You can edit the zone if you need to. If you loaded a new CTY file after you started the contest, you’ll need to use Tools, Rescore Current Contest

Are you saying that "Add Call to Country" on the Tools menu does not work? 73, Pete N4ZRDownload the new N1MM Logger+ at . Check out the Reverse Beacon Network at , now spotting RTTY activity

I had a similiar problem with TO8M. (FM) I had not updated my .cty file and when I worked them there was no way update the prefix. (which I can do in another program) I then updated the .cty file,

TX8D in my log shows a blank for the mult. If I type TX8D in the entry window again, it shows it as FK New Caledonia. If I type FK in the entry window it shows it as a needed mult.

Right-click on a call in the Available window and select Delete spot. 73, Pete N4ZRDownload the new N1MM Logger+ at . Check out the Reverse Beacon Network at , now spotting RTTY activity

Hi Glenn, Did you connect a cable from one of the WinKeyer PTT to the K3 (where you would connect a key)? 73, Art, W2NRA DXCC CW Honor Roll SKCC #11634Sx4

Hi Art and all. There are some good solutions. But the most easy that I'd found is to save, renaming, the logger .ini file:. N1MM Logger.ini It contains almost any parameters out of some that are

If you place a comment (or comments) containing the contest name (s) associated with the call history data, the program will automatically turn OFF call history lookup when a contest is opened that is

Went to a friend's to run CQWW for a while. Opened existing database, set up new log in database CQWWCW. Ran 250 Q's or so, everything working fine. VFO B window kept popping up, took me a while to

Finished CQWW CW using Classic mode. Now how can I save this setup so I can revert to it next time? My usual config is for SO2R. Program worked very well. Thanks for the fine job developers! 73, Art

Unless he is running SO2R he has to use key1 and PTT1 (if he uses it). Iran into that as a change from earlier versions of NL+ and Classic. I havealways run with DTR on and RTS off for WKUSB. 73,

Check the keying cable from WinKeyer to the K3 KEY IN jack. IIRC, there are two possible keying outputs from WinKeyer - make sure to connect to the right one. Does WinKeyer key the rig via the paddle

Hi Mark, It's happened to me numerous times on my K3. I'm sending a CW message and for whatever the reason I want to terminate the message so I quickly sweep my left hand to the ESC key and

I get this as well the problem is in the Available window not the Bandmap. I can only delete calls in the bandmap windows I used to be able to do the same in the Available Window – Is there a new

Hello to all, I am a new N1MM+ user I am having difficulty getting my WinKeyer USB to key my K3 using N1MM+. I have read a lot on the N1MM web site and the setup seems fairly straight forward. The K3

<!--#ygrp-mkp { border: 1px solid #d8d8d8; font-family: Arial; margin: 10px 0; padding: 0 10px;}#ygrp-mkp hr { border: 1px solid #d8d8d8;}#ygrp-mkp #hd { color: #628c2a; font-size: 85%;

Sri If you press the stereo key (tilda), the key below Esc, Dual rx will be turned on. Send me a reproducible sequence after the contest & I will look at it. John, K3CT

We've triple checked, its off. That was the only thing that made sense to me. If we are S&P and start running, all is fine with the F1 key. Log a QSO, hit F1 for the next CQ and the 7600 goes into

Mark, You turned On. Config, Dual Watch Always On. John, K3CT Sent via the Samsung Galaxy S®6 active, an AT&T 4G LTE smartphone

Have you proven there is something wrong with the .mc file ? Are the symptoms repeatable when you use the "bad" .mc file on the log that works with the "good" .mc ? 73, Steve, N2IC