Hello, in "Running" I like using ESM, but in "S&P" I don't. So I would like to set and store ESM accordingly to "Running" and "S&P". 73 de Uwe, DL4AC

Thank you for your time, just emailed it, will see if I did it right. Ron KF7ZN Ron Wilcox

Tony, I cannot duplicate what you are seeing. ESM is off, right? No F-keys are highlighted in the Entry window? When you hit the RUN F3 do you see any message on the status line at the bottom of

Pete- I'll give you a better answer. I'm running, the RUN bullet is on. I'm working a station, I have all his info properly filled in. I am NOT using ESM. I want to hit F3 ('Roger QRZ K1KP') to get

In S&P mode? Hard to imagine what you would want to send after S&P F2 (your exchange).l 73, Pete N4ZRDownload the new N1MM Logger+ at . Check out the Reverse Beacon Network at , now spotting

If you made the Cabrillo file, next thing is to upload it to the contest sponsor. The email address is SSPhone at arrl.org. Just type your call in the subject line and copy and paste your Cabrillo

First contest and first time using N1MM, great program and congrats on YASME award. Would someone please help direct me to the right source or spot in the manual. I generated a cabrillo file but am

The Country (CTY) Files were updated on 23 November 2015: http://www.country-files.com/cty-2513-23-November-2015/ For installation instructions, start at:

No Pete, I have a message recorded there...

I have Drew’s databases and found the problem. We are working on a program change. John, K3CT

Drew, To clarify, you cannot import QSOs with the same call sign and same date/time into the same database, EVEN IF THEY ARE IMPORTED INTO DIFFERENT CONTEST LOGS. If you create a second database you

As a recent convert from WriteLog this was my first CW and first SSB sweepstakes contest using N1MM+. If nobody else has mentioned it, let me be the first to say that the way the program handles the

It sounds like you do not have multiple stations on a network. If so, why do you have computer networking enabled? John, K3CT

Rich, Olli and Pete, thank you very much for your help. The mm+ filters are working now. The problem was that I was testing the filters using the command "sh/dx". I found that the filters in the

Even if they are in CA, if you are in NV the heading could be anywhere inpossibly a 120 degree arc. Although, if you know the section that could possiblynarrow it down some. If you run off wl_cty you

How would the program know for sure where to point the beam if the station is not in the database? Just because it's a W6 doesn't mean they are in California :-) 73 Tom W7WHY

I have an LPDA at 75 feet. On 20M and above if I point directly at anotherstation within about 700 miles I MIGHT hear them but in most cases I have towork them off the back of the antenna or some

John I had the same problem. I had to check Master in the network window. Once I did that all was ok. Good luck Pat / W3FiZ

K1TTT-1,K1TTT.NET:7373|3 73's Ed w1zz@... http://www.qrz.com/db/W1ZZ

Sorry for the bandwith. I did an update and all is working now. I thought I had the latest update already installed. Should have waited a few more minutes b4 sending for help.. John km5ps