The N1MM logger+ documentation clearly says it works with LPRotor, but gives no details as to how. LPRotor also works well with DXLabs. I can make the rotor talk to N1MMLogger+ as a DCU1 controlled

I just wanted to say that v.5325 worked perfectly in CQWW CW last weekend. I had two radios, Telnet, and two bandmaps going, and there were zero delays or crashes. The Winkey PTT change that was

I observed a 3-4 second delay from when a spotted callsign was logged, until that spot was removed from the Available QSO Window. Didn’t always watch the spot disappear, but I think the times when

All, during the CQWW-CW I noticed intermittend no/slow reaction. What I noticed is that sometimes N1MM+ would react on a press of a button after 1-2 seconds. I noticed that during these times there

Tom, My first guess would be that the cluster you were connected to was having problems with the barrage of spots and was going up and down. >> Gerald, VE1DT ---In N1MMLoggerplus@..., <kamham69@...>

Paul, Nope, that was removed, along with seconds. However, the year is still shown for the DX log. If you are looking at previous contests and get mixed up, doing a File/Open Log shows you the full

Is there a way to display the year in addition to the month, day and time in the Log window? Paul, W3GQ

The Country (CTY) Files were updated on 02 December 2015: http://www.country-files.com/cty-2514-2-December-2015/ For installation instructions, start at:

We were LoggerPlus at K2LE for the CQWW, and ran into something interesting. We had the cluster running, and had set the appropriate filters - band and mode. Seems after a while, all the spots

http://www.arrl.org/news/view/new-uk-ei-dx-contest-to-launch-in-december Yes, the inaugural event is this weekend, 5th/6th December starting at 1200Z, it's SSB with a separate CW contest in

Thank you guys. N1MM is so ladened with featurers it's hard to know it all. I was thinking the help document should have explained that but the question then is where to put it. I can see the

Chris Go to NL+ main page Click Support>Bug reports Note that you must register. Les, G4OGB

Ran smooth as silk. As a relatively new user to ESM and also SO2R, I flubbed a couple keystrokes (but only lost 1 QSO in ~3600), so I'll consider it a huge win ! Thanks very much. I really enjoyed

What version of Winkeyer firmware ? 73, Steve, N2IC

Using the Winkeyer USB, has anyone else had the problem of the Key output locking up when interrupting a CQ on one radio by initiating a S&P QSO on the other radio? A couple of times in CQ WW when I

Bump? LP-Rotor links to TRX Manager using DDE. Did you send this to the wrong reflector? 73, Pete N4ZRDownload the new N1MM Logger+ at . Check out the Reverse Beacon Network at , now

Bump. No LP-Rotor user info?

Jeff, Deleting QSOs from an ADIF export would be a relatively safe and expeditious way to go. The following steps would remove the QSOs from the database. Note that the first step should be considered

Hi, Anyone help? Thanks Chris

What is the most expeditious way to delete large numbers of QSOs from an N1MM Logger+ database? A configuration that erroneously enabled networking infected my PJ2/K8ND database with 500+ QSOs