I have issues with my IC-7410 along these lines. As long as I remember this, I am good.HTHMike VE9AAN1MM Logger Website | Single Operator Split Operation N1MM Logger Website |

I have found what seems to me a serious error in N1MM+’s CW keying. I am describing this error here, rather than submitting a bug report, because I may be confused. Perhaps there is no error and I

When running split the top of the entry window shows the receive frequency plus another frequency in parentheses ( ). I am assuming that the number in parenthesis is the transmit frequency but can

I applied the handshake, handshake protocol as suggested by the ham with the TS-50 problemand that allows communication to occur with the latest N1MM+.

I would try first "Putty" to setup manually a connection - it will work for sure - as AVG or what else is blocking your Ports will hopefully ask what to do. Then if Putty does it job - deinstall AVG

Serge, This also matches the “Suggested Settings” in the COM port setup window. John, K3CT

Joachim, In the Entry window, click on Help, select Manual Index. Select Supported Radios. Select TS-480. Do the commands listed here work? I expect you have the VGS-1 option. John,

Good morning, I would like to use the internal voice keyer (because of humm) of the TS480 via F key(s) of N1MM+. Probably via the RS232 interface. BTW I only need one memory for cq calling. Any idea

Steve, A little more checking. This was working in 5354 and broke in 5375. I assume it has to do with this change: Modified heading lookup for K[0,5,6,7,8,9] lookup, which gets confused by wl_cty.dat.

Seems to be a problem with the CQ Zone in all contests. I've checked DX, UKEIDX, REFCW, and CQWWCW. The ITU zone exception however, does work properly in IARU. >> Gerald, VE1DT ---In

What contest(s) ? 73, Steve, N2IC

Robby, Unfortunately, the "it was working and a few days ago, it stopped" syndrome is becoming a common issue with all of the automatic updates forced on us. In my personal experience, both AVG and

Yes. The former. I do not get a connection. It says connecting but then a failure message. Some sources say connection failed and some say no response. My windows firewall is taken over by AVG. I

There appears to be a problem with some callsign zone exceptions. In particular, many USA callsigns do not update zone exceptions as far as indicated in the Entry & Info windows. On the other hand, I

What do you mean by "my system is not responding"? Do you mean you do not get connected to the cluster node at all (i.e. when you click on the Reconnect button in the Telnet window under the main

I have tried 30 hosts that used to work. My system is not responding to them. I cannot use telnet anymore. I tried rolling back a few updates with no success. -Robby HP3/VY2ss

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the N1MMLoggerplus group. File : /FOC_VE2FK_2090.txt Uploaded by : ve2fk

You can change the start time and date. In the list in the contest setup window, right-click or left-click on the date or time for the currently active contest to open a date/time selector window.

Awfully hard for the N1MM team to keep track of rule changes of secret contests, not open or publicized to non-members of the organization. 73, Steve, N2IC

Not sure if this has been reported, but the log for the FOC Marathon (FOCCW) shows an incorrect start time. The contest begins at 2100 UTC on 5 Feb, not 0000 UTC on 6 Feb. George W1EBI