Craig, Thanks to you and the rest of the crew for a great DXpedition. 73, Jeff WB3JFS

We used N1MM Plus DXpedition version on the K5P Palmyra DXpedition. We had six computers networked on a WiFi router that we took along. All were setup and tested before departure. We used a special

FYI for developers to check out. I just installed the latest version and it gives 59 for EXCH instead of 599 in ARRL CW setup...or maybe I didn't configure something correctly. Other than that

Logger Plus is not letting me log a QSO with KH6TU. Alan (AD6E, now living in KH6) sent HI. That blew up. I tried KH6, and also leaving the section blank. All blew up. The Cabrillo has an empty

TNX for the info, I hope the detailed error info I posted sent will help in solving this problem. 73, Ben WB2RHM

HI Rich Thanks for the prompt reply and first solution did nothing so went to solution number 2 into the .ini file and modified [DigitalInterface1] as suggested and BINGO all back to normal . Not

This subject was brought up by me already on 24 Jan and Dave responded to it. He has an experimental version that solves this problem. It’s up to him when he releases it as a new version. 73 de

I can't speak for sure about Windows 10, but in Windows 7 you would do the following: Look on the task bar for the N1MM icon group, hover the mouse over the group, then look in the mini-window

David, Here is the .WER report on the 2Tone

You have a space between org and :7300 . Remove it. 73, Steve, N2IC

FYI------ I recreated the failure, it happens every time, on a different computer (different processors one is AMD and one is intel) Here is the Windows 7 Event Viewer's Error Detail for when the

information from debugger file hread # 34 @ 2016-02-06 19:17:03.101 PM There was an error to connect to k3ww.gofrc.org :7300.

Hi upgraded to win 10 Pro a while back and all was ok now went to do RTTY contest and got the RTTY engine but not the window where you recieve etc . .. Something happened or I did some user error

Hi Rick, Thanks for the Sprint QSO’s … and the multiplier. Looking at the OTHER tab in the Configurer, I can see why you might be confused by the PGUP/PGDN. It isn’t at all clear

I too am thumbs up for a "multipliers left" or subtractive model for the section display of mults. not advocating the removal of what mult display you have there now, but add an alternate

Okay, thanks. Yes, I was mixing apples and oranges here, and I can see that now; I've used N1MM long enough to know that the Page UP and Page Down keys adjust CW speed. Not sure what I was thinking,

Please post the process to get the program working under linux. There are a number of folks who would be interested. A step-by-step would be ideal. 73, Tom - N1MM

I believe you are confusing the PGUP/PGDN KEYS with {PGUP} and {PGDN} MACROS which can be embedded in the F-key messages. They are not the same. On CW the PGUP/DN KEYS change the cw speed according

Fred, The manual is correct and both macros work fine here. The radio frequency change (up/dn frequency) direction is identical to up/dn arrow frequency change. If your radio frequency

Good question, but coincides with 160M being called the Top Band. Going up in freq would be going down. -- Dave NJ4F